Update a text file (using eScript)
Dear All,
I have a parameter file which is a text document (word, notepad, textpad, ...). THIS DOCUMENT IS LOCATED IN A FOLDER OF THE SIEBEL SERVER.
I would like to give to my users the ability to update it when a button present in the SIEBEL application is clicked.
I have proposed to use the ComCreateObject command but it seems that this command runs in local mode. The editor (Word, NotePad, TextPad, ...) must be installed on the client. And this is not always the case. Also, I have security constraints on the folders of the Siebel server.
How can I update (by using my local SIEBEL application) a text document located in the SIEBEL server.
Any idea would be greatly appreciate.
Thanks a lot.
It looks like you are opening a can of worms here.
It is possible to execute Notepad or Wordpad on the client side, by instantiating the ActiveX through Browser Script.
You can search on "ActiveXObject" on Supportweb for more info.
But this probably won't solve the security on the server directories.
You could try to give every user an exclusive sub-directory, but this will cause a lot of administration.
Similar Messages
-
Uploading into database table from text file using tab (GUI_UPLOAD)
i have small doubt
i have 3 fiels in text file using tab as separator
i need to update into database table 'ZABPSP_01'
from 's.txt' located in local disk.
My code is below.
Please let me know the correction.
Awaiting for ur response.
Thanks in advance
REPORT ZABPSPPRG_02.
TABLES: LFA1,MARA,KNA1,ZABPSP_01.
DATA: begin of itab occurs 0,
IKUNNR type zabpsp_01-kunnr,
IMATNR type zabpsp_01-matnr,
IADRNR type zabpsp_01-adrnr.
DATA:END OF ITAB.
DATA: FILENAME1 TYPE STRING.
FILENAME1 = 'C:/s.txt'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILENAME1
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = itab.
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
zabpsp_01-kunnr = ITAB-IKUNNR.
zabpsp_01-matnr = ITAB-IMATNR.
zabpsp_01-adrnr = ITAB-IADRNR.
WRITE : / ' UPLOAD SUCCESS ' .
ENDIF.
\[subject changed, don't write everything in upper case!\]
Edited by: Jan Stallkamp on Aug 6, 2008 2:39 PMHi,
After upload modify the code like below. Also change the file name as some one suggested already. If u are still facing problems then check in debug mode what is happening after FM call.
CALL GUI_UPLOAD FM.
IF sy-subrc EQ 0
IF NOT itab[] IS INITIAL.
MODIFY ZABPSP_01 FROM TABLE itab.
WRITE : / ' UPLOAD SUCCESS ' .
ELSE.
WRITE 'No data in file'.
ENDIF.
ELSE.
WRITE 'Upload failure'.
ENDIF.
Thanks,
Vinod. -
JTable - Help with updating a Text File
Hi all,
I've been fighting this for a few days. I am trying to update a Text File with my JTable.... Displaying the data works great but when I try to edit a cell/field on the gui, I'm bombing out...... My text fiel is a small user control file with Id, Name,
Date, etc etc with the fields delimited with a "|".... I have built an Abstract Data Model (see below).... and I think my problem is in the setValueAt method.......
Thanks so much in advance!!!!
Mike
code:
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
import java.io.*;
import java.util.*;
public class DataFileTableModel extends AbstractTableModel {
protected Vector data;
protected Vector columnNames ;
protected String datafile;
public DataFileTableModel(String f){
datafile = f;
initVectors();
public void initVectors() {
String aLine ;
data = new Vector();
columnNames = new Vector();
try {
FileInputStream fin = new FileInputStream(datafile);
BufferedReader br = new BufferedReader(new InputStreamReader(fin));
// extract column names
StringTokenizer st1 =
new StringTokenizer(br.readLine(), "|");
while(st1.hasMoreTokens())
columnNames.addElement(st1.nextToken());
// extract data
while ((aLine = br.readLine()) != null) {
StringTokenizer st2 =
new StringTokenizer(aLine, "|");
while(st2.hasMoreTokens())
data.addElement(st2.nextToken());
br.close();
catch (Exception e) {
e.printStackTrace();
public int getRowCount() {
return data.size() / getColumnCount();
public int getColumnCount(){
return columnNames.size();
public String getColumnName(int columnIndex) {
String colName = "";
if (columnIndex <= getColumnCount())
colName = (String)columnNames.elementAt(columnIndex);
return colName;
public Class getColumnClass(int columnIndex){
return String.class;
public boolean isCellEditable(int rowIndex, int columnIndex) {
return true;
public Object getValueAt(int rowIndex, int columnIndex) {
return (String)data.elementAt( (rowIndex * getColumnCount()) + columnIndex);
public void setValueAt(Object aValue, int rowIndex, int columnIndex) {
Vector rowVector=(Vector)data.elementAt(rowIndex);
rowVector.setElementAt(aValue, columnIndex);
fireTableCellUpdated(rowIndex,columnIndex);
// return;
}No, the DefaultDataModel does not update the physical data file. It is just used to store the data as you type in the table cells.
The code from above is used to read data from a file and populate the DataModel.
Now you need to write another routine that will take the data from the DataModel and write it to your file. I have never actually done this but I think the code would be something like:
int rows = table.getModel().getRowCount();
int columns = table.getModel().getColumnCount();
// Write column headers
for (int j = 0; j < columns; j++)
TableColumn column = table.getColumnModel().getColumn(j);
Object o = column.getHeaderValue();
writeToFile( o.toString() + "|" );
writeToFile( "\n" );
// Write each row
for (int i = 0, i < rows; i++)
for (int j = 0, j < columns; j++)
Object o = table.getValueAt(i, j);
writeToFile( o.toString + "|" );
writeToFile( "\n" );
}If you need to update the file whenever data in a cell changes, then you could extend the DefaultTableModel and override the setValueAt() method to also write the contents of the DataModel to a file. But this is a lot of overhead since it rewrite the entire file for every cell change. -
Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1
hello guys, i'm a newbie here.
I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
REPORT ZHR_TESTEMAIL .
TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
DATA: FOLD_YR(2) TYPE C,
FOLD_TYPE(3) TYPE C,
G_HEADER LIKE SOOD2,
G_FOLMAM LIKE SOFM2,
METHOD1 LIKE SY-UCOMM,
G_DOCUMENT LIKE SOOD4,
G_USER LIKE SOUDNAMEI1,
FOLD_NUMBER(12) TYPE C,
G_NEW_PARENT LIKE SOODK,
G_OWNER LIKE SOUD-USRNAM,
G_REF_DOCUMENT LIKE SOOD4,
G_USER_DATA LIKE SOUDATAI1,
G_AUTHORITY LIKE SOFA-USRACC,
G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF G_FILES OCCURS 10 ,
TEXT(4096) TYPE C,
END OF G_FILES.
DATA: BEGIN OF IT_WS_FILE OCCURS 0,
WS_FILE LIKE RLGRAP-FILENAME,
END OF IT_WS_FILE.
DATA: BEGIN OF IT_SAPID OCCURS 0,
SAPID LIKE USR02-BNAME,
END OF IT_SAPID.
DATA: BEGIN OF IT_EMAIL OCCURS 0,
EMAILADD LIKE PA0105-USRID_LONG,
END OF IT_EMAIL.
DATA: BEGIN OF IT_TSP01 OCCURS 0.
INCLUDE STRUCTURE TSP01.
DATA: END OF IT_TSP01.
DATA: BEGIN OF TAB2 OCCURS 50,
TEXT(200) TYPE C,
END OF TAB2.
DATA: V_DOCDATA TYPE SODOCCHGI1,
V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
V_OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJHEX LIKE SOLIX OCCURS 0 WITH HEADER LINE,
IT_RECVRS TYPE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
IT_CONTNT TYPE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_BODY LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
V_TLIN TYPE I,
V_LINE TYPE I.
DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
TEXTLINE(5000),
END OF IT_TEXTLINE.
DATA: FYL LIKE RLGRAP-FILENAME,
GV_SUBNO LIKE SOSU-SUBNO,
GV_EMAIL LIKE PA0105-USRID_LONG,
GV_NEXTDAY LIKE SY-DATUM,
YEAR(4) TYPE C,
RECFLAG TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
PARAMETERS: SUBJ(254) TYPE C OBLIGATORY, "Subject
DESC(254) TYPE C. "Message
SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM.
SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM2.
SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT2 RADIOBUTTON GROUP A. "Server
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT3 RADIOBUTTON GROUP A. "Spool
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER. "Spool Number
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PARAM3.
SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PROC.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
CLEAR: WS_FILE_TEMP.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SY-DYNNR
FIELD_NAME = 'WS_FILE'
IMPORTING
FILE_NAME = WS_FILE_TEMP.
WS_FILE-LOW = WS_FILE_TEMP.
AT SELECTION-SCREEN.
SELECT SAPNAM FROM SOUC
INTO TABLE IT_SAPID
WHERE SAPNAM IN SAPID
AND DELETED = ''.
GV_NEXTDAY = SY-DATUM + 1.
LOOP AT EMAILADD.
IT_EMAIL-EMAILADD = EMAILADD-LOW.
APPEND IT_EMAIL.
CLEAR: IT_EMAIL.
ENDLOOP.
IF NOT BPROC IS INITIAL.
CLEAR: RBUT1, RBUT3.
RBUT2 = 'X'.
ELSE.
CLEAR: RBUT2.
ENDIF.
IF NOT RBUT3 IS INITIAL.
REFRESH: WS_FILE.
ENDIF.
IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
MESSAGE E000(ZZ) WITH TEXT-201.
ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
CLEAR IT_SAPID.
READ TABLE IT_SAPID.
SELECT SINGLE SUBNO FROM SOSU
INTO GV_SUBNO
WHERE USRNO IN ( SELECT USRNO FROM SOUC
WHERE SAPNAM = IT_SAPID-SAPID ).
IF SY-SUBRC NE 0.
MESSAGE E000(ZZ) WITH TEXT-202.
ENDIF.
CLEAR: IT_SAPID.
ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
CLEAR: IT_SAPID, IT_EMAIL.
READ TABLE IT_SAPID.
READ TABLE IT_EMAIL.
SELECT SINGLE SUBNO FROM SOSU
INTO GV_SUBNO
WHERE USRNO IN ( SELECT USRNO FROM SOUC
WHERE SAPNAM = IT_SAPID-SAPID ).
IF SY-SUBRC NE 0.
SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
WITH SUB_ESC EQ 'U'
WITH EDAT EQ SY-DATUM
WITH BDAT EQ SY-DATUM
WITH BDAT EQ GV_NEXTDAY
WITH EDAT EQ '99991231'
WITH BTIM EQ SY-UZEIT
WITH ETIM EQ '240000'
WITH FORW_ALL EQ 'X'
WITH PSTHR2 EQ ''
AND RETURN.
ENDIF.
CLEAR: IT_SAPID.
ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
RECFLAG = 'X'.
ENDIF.
START-OF-SELECTION.
PERFORM B_SENDMAIL.
FORM B_SENDMAIL.
YEAR = SY-DATUM+0(4).
LOOP AT WS_FILE.
CLEAR: FYL.
FYL = WS_FILE-LOW.
REFRESH: TAB2.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FYL
FILETYPE = 'BIN'
TABLES
DATA_TAB = TAB2.
IT_TEXTLINE[] = TAB2[].
DOCUMENT_DATA (SUBJECT OF MAIL)
V_DOCDATA-OBJ_NAME = DESC.
V_DOCDATA-OBJ_DESCR = SUBJ.
V_DOCDATA-OBJ_LANGU = SY-LANGU.
V_DOCDATA-SENSITIVTY = 'C'.
V_DOCDATA-OBJ_PRIO = '1'.
BODY OF MAIL
IT_BODY-LINE = 'Collection Report'.
APPEND IT_BODY.
CONTENTS_TXT (Attachments)
IT_CONTNT[] = IT_TEXTLINE[].
DESCRIBE TABLE IT_CONTNT LINES V_LINE.
READ TABLE IT_CONTNT INDEX V_LINE.
PACKING_LIST
V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
V_OBJPACK-TRANSF_BIN = 'X'.
V_OBJPACK-HEAD_START = 1.
V_OBJPACK-HEAD_NUM = 0.
V_OBJPACK-BODY_START = 1.
V_OBJPACK-BODY_NUM = V_LINE.
V_OBJPACK-DOC_TYPE = 'TXT'.
V_OBJPACK-OBJ_NAME = 'ATTACHMENT'.
V_OBJPACK-OBJ_DESCR = 'Attached Document'.
APPEND V_OBJPACK.
CLEAR V_OBJPACK.
RECEIVERS of mail
IF RECFLAG IS INITIAL.
LOOP AT IT_SAPID.
IT_RECVRS-RECEIVER = IT_SAPID-SAPID.
IT_RECVRS-REC_TYPE = 'B'.
IT_RECVRS-COM_TYPE = ''.
IT_RECVRS-EXPRESS = 'X'.
IT_RECVRS-NO_FORWARD = ''.
IT_RECVRS-NO_PRINT = ''.
APPEND IT_RECVRS.
CLEAR IT_RECVRS.
ENDLOOP.
ELSE.
LOOP AT EMAILADD.
IT_RECVRS-RECEIVER = EMAILADD-LOW.
IT_RECVRS-REC_TYPE = 'U'.
IT_RECVRS-COM_TYPE = 'INT'.
IT_RECVRS-EXPRESS = 'X'.
APPEND IT_RECVRS.
CLEAR IT_RECVRS.
ENDLOOP.
ENDIF.
OBJECT_HEADER (Filename)
CONCATENATE 'Collection Report' '_'
SY-DATUM+4(4) YEAR '.TXT'
INTO V_OBJHEAD-LINE.
V_OBJHEAD-LINE = FYL+16(25).
APPEND V_OBJHEAD.
CLEAR V_OBJHEAD.
Function Module For Sending Mail with Attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = V_DOCDATA
TABLES
PACKING_LIST = V_OBJPACK
OBJECT_HEADER = V_OBJHEAD
CONTENTS_HEX = IT_CONTNT
CONTENTS_TXT = IT_BODY
RECEIVERS = IT_RECVRS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
MESSAGE S000(ZZ) WITH TEXT-005.
ELSE.
MESSAGE S000(ZZ) WITH TEXT-006.
ENDIF.
ENDLOOP.
end of my code *
please help me guys... when i run this program, DOCUMENT_NOT_SENT is what i always get..
waiting for ur reply... thank you vey much and godbless.Hi,
Try this sample code.
FORM SEND_TO_EMAIL USING zFName.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: ctmp(50) TYPE C.
Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'JOURNAL'.
CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
SEPARATED BY SPACE.
DOC_CHNG-OBJ_DESCR = cTmp.
OBJTXT = 'SAP Payroll Journal'.
APPEND OBJTXT.
CONCATENATE 'For Period' pybegda INTO ctmp
SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
CONCATENATE 'Attached File :' zFname INTO ctmp
SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
OBJTXT = 'Please find the attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
<b>LOOP AT xMail.
CONDENSE xMail-aline.
OBJBIN = xMail-aline.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.</b>
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = zFname. APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
OBJPACK-OBJ_NAME = 'DATA'.
OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
LOOP AT PENERIMA.
CONDENSE PENERIMA-PNRM.
RECLIST-RECEIVER = PENERIMA-PNRM.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
ENDLOOP.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = ' '
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT RECLIST.
WRITE: / RECLIST-RECEIVER(48), ':'.
IF RECLIST-RETRN_CODE = 0.
WRITE / 'The document was sent'.
ELSE.
WRITE / 'The document could not be sent'.
ENDIF.
ENDLOOP.
WHEN 1.
WRITE: / 'Too many receiver'.
WHEN 2.
WRITE: / 'Document could not be sent to any recipient'.
WHEN 4.
WRITE: / 'No send authorization'.
WHEN OTHERS.
WRITE: / 'Error occurred while sending'.
ENDCASE.
ENDFORM. -
How to print a text file using Java
How can I print a text file using Java without converting the output to an image format. Is there anyway I can send the characters in the text file as it is for a print job? I did get a listing doing this ... but that converted the text to an image format before printing....
THanks,.Hi I had to write a print api from scratch, and I did not convert the output to image. Go and read up on the following code. I know there is a Tutorial on Sun about the differant sections of the snippet.
private void printReport()
Frame tempFrame = new Frame(getName());
PrintJob printerJob = Toolkit.getDefaultToolkit().getPrintJob(tempFrame, "Liesltext", null);
Graphics g = printerJob.getGraphics();
//I wrote the method below for calculations
printBasics(g);
g.dispose();
printerJob.end();
}This alone wont print it you have to do all the calculations in the printBasics method. And as I said I wrote this from scratch and all I did was research first the tutorial and the white papers
Ciao -
How to download a text file using classes
Hi Guys
I want to download a text file using classes.
Any idea how to do it ?
Thanks
SameerHI sameer,
It is no different from using a Function module.
example:
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = w_fpath
append = SPACE
write_field_separator = 'X'
CHANGING
data_tab = it_download
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24
Regards,
ravi -
How to read a tab seperated data from a text file using utl_file
Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
NaveenNaveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead. -
How to read some lines from a text file using java.
hi,
i m new to java and i want to read some lines from a text file based on some string occurrence in the file. This file to be read in steps.
we only want to read the file upto the first Occurrence of "TEXT" string.
How to do it ,,,
Kinldy give the code
Regards,
Sagar
this is the text file
dfgjdjj
sfjhjkd
ghjkdg
hjkdgh TEXT
ikeyt
ujt
jk
tyk TEXT
rukl
rHendawy wrote:
Since the word "TEXT" is formed of 4 letters, you would read the text file 4 bytes by four bytes. Wrong on two counts. First, the file may not be encoded 1 byte per character. It could be utf-16 in which case it would be two byte per character. Second, even if it were 1 byte per character, the string "Text" may not start on a 4 byte boundary.
Consider a FileInputStream object "fis" that points to your text file. use fis.read(byte[] array, int offset, int len) to read every four bytes. Convert the "TEXT" String into a byte array "TEXT".getBytes(), and yous the Arrays class to compare the equality of the read bytes with your "TEXT".getBytes()Wrong since it relies on my second point and will fail when fis.read(byte[] array, int offset, int len) does not read 4 bytes (as is no guaranteed to). Check the Javadoc. Also, the file may not be encoded with the default character encoding.
The problem is easily solved by reading a line at a time using a BufferedReader wrapping an InputStreamReader wrapping a FileInputStream and specifying the correct character encoding.
Edited by: sabre150 on Apr 29, 2009 2:13 PM -
How to call text file using Script in Data Integrator
Dear All,
Can any one assit me in how to call a text file using script with the help of Data Integrator.
and one question ?
M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
any one assist me.mary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
bis= new BufferedInputStream(new FileInputStream(f));
bytesRead=bis.read(buff,0,buff.length);
if(bytesRead!=-1){
// create a BufferedOutputStream from ServletOutputStream
bos=new BufferedInputStream(response.getOutputStream());
do{
bos.write(buff,0,bytesRead);
}while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
////error handling
} -
I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time . -
How to display the out put of the sql query in a text file using forms
I want to display the out put of the sql query in a text file using forms 6.0.Same could be done using spool command in sqlplus but i want it using forms....Fiaz
Have a look at the text_io package:
http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=3&vtTopicFile=f1_help/oraini/c_text_io.html&vtTopicId=
cheers -
Report the size of all SharePoint Databases in a text file using PowerShell?
I am new to Powershell. please help me for following question with step by step process.
How to report the size of all SharePoint Databases in a text file using PowerShell?Hi Paul,
Here is the changed script, which will also include the size for the Config DB.
Please let me know if it worked:
#Get SharePoint Content database sizes
Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$date = Get-Date -Format "dd-MM-yyyy"
#Variables that you can change to fit your environment
$TXTFile = "D:\Reports\SPContentDatabase_$date.txt"
$SMTPServer = "yourmailserver"
$emailFrom = "[email protected]"
$emailTo = "[email protected]"
$subject = "Content & Config Database size reports"
$emailBody = "Daily/Weekly/Monthly report on Content & Config databases"
$webapps = Get-SPWebApplication
$configDB = Get-SPDatabase | ?{$_.Name -eq ((Get-SPFarm).Name)}
$ConfigDBSize = [Math]::Round(($configDB.disksizerequired/1GB),2)
Add-Content -Path $TXTFile -Value "Config Database size: $($ConfigDBSize)GB"
Add-Content -Path $TXTFile -Value ""
foreach($webapp in $webapps)
$ContentDatabases = $webapp.ContentDatabases
Add-Content -Path $TXTFile -Value "Content databases for $($webapp.url)"
foreach($ContentDatabase in $ContentDatabases)
$ContentDatabaseSize = [Math]::Round(($ContentDatabase.disksizerequired/1GB),2)
Add-Content -Path $TXTFile -Value "- $($ContentDatabase.Name): $($ContentDatabaseSize)GB"
if(!($SMTPServer) -OR !($emailFrom) -OR !($emailTo))
Write-Host "No e-mail being sent, if you do want to send an e-mail, please enter the values for the following variables: $SMTPServer, $emailFrom and $emailTo."
else
Send-MailMessage -SmtpServer $SMTPServer -From $emailFrom -To $emailTo -Subject $subject -Body $emailBody -Attachment $TXTFile
Nico Martens - MCTS, MCITP
SharePoint 2010 Infrastructure Consultant / Trainer -
How to convert a HTML files into a text file using Java
Hi guys...!
I was wondering if there is a way to convert a HTML file into a text file using java programing language. Likewise I would also like to know if there is a way to convert any type of file (excel, power point, and word) into text using java.
By the way, I really appreciated the help that you guys gave me on my previous topic on how to extract tests from a pdf file.
Thank you....HTML files are already text files. What do you mean you want to convert them?
I think if you search the web, you can find things for converting those MS Office files to text (or extracting text from them, as I assume you mean). -
Deleting a column in a text file using LabVIEW
Hello all,
I'm trying to delete the first column of my tab delimited text file using LabVIEW and then save it under the same file name. Can someone show me a quick way to perform this operation. Is this even possible with LabVIEW? Any help would be much appreciated.
My purpose is to automate this operation for hundreds of daily text files containing data that needs processing. I'm currently using LabVIEW 8.2.
Thanks!
-noviceLabVIEWuserIf the file is relatively small:
Read the file using the Read from Spreadsheet File VI to get 2D array.
Remove the column from the 2D array.
Write out new 2D array to new file using Write to Spreadsheet File VI.
If the file is relatively large then you will likely run into memory issues. In this case you will need to read the file in chunks. You can decide how many lines to read at a time. Use a for-loop that's set to run for the number of chunks to read (based on the total number of lines and the number of lines you want to read at a time). Hint: Quotient & Remainder function. In the loop use the Read Text File VI to read your set number of lines. Convert the lines to a 2D array delete your column, and write out that chunk of data to the new file. Rinse and repeat. -
How to read a text file using Java
Guys,
Good day!
Please help me how to read a text file using Java and create/convert that text file into XML.
Thanks and God Bless.
Regards,
I-Talkpublic void fileRead(){
File aFile =new File("myFile.txt");
BufferedReader input = null;
try {
input = new BufferedReader( new FileReader(aFile) );
String line = null;
while (( line = input.readLine()) != null){
catch (FileNotFoundException ex) {
ex.printStackTrace();
catch (IOException ex){
ex.printStackTrace();
}This code is to read a text file. But there is no such thing that will convert your text file to xml file. You have to have a defined XML format. Then you can read your data from text files and insert them inside your xml text. Or you may like to read xml tags from text files and insert your own data. The file format of .txt and .xml is far too different.
cheers
Mohammed Jubaer Arif.
Maybe you are looking for
-
Authentication between Single Sign-On and Web based applications
Hi everyone, I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following: Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application
-
Why iPhoto 9.4 get crash with the latest OSX 10.8.2 ?can you help
can't understand why this happen as soon as i updeate my iphoto to 9.4 the program screen start to run from one desktop to other !!!! can't even rename the faces and the program start to do the same ... is this problem due to the prgrams of to other
-
Fathers name not appearing in HR standard Reports
Dear All, Currently we are in process of using the standard pension reports like Form4 P.S, Form5 P.S etc(Tcode : PC00_M40_EPN). In the report output , we observe that the Father's name field is not getting populated. On Analysing further, we unders
-
Using Time and Date to create calender events
Hi all, I want to create 'events' in a users calender through my apex app. To get just the date seems fine, but ideally I want to store both the Date and time of the event. I have a data entry page that has 2 calender items(one item is a date picker,
-
XQuery not returning any results when doc contains ENTITY refs
Dear Forum members, I am a bdbxml newbie so please be gentle. I am trying to run xqueries against a TEI P5 document on bdxml 2.4.13 using Oxygen 9 (I'm also using Python and the API - it's not working either) My XML contains transcripts of poems writ