Update Control message while processing VL10*

When processing VL10A or VL10B in 'Background' a random 'Update Control' message will break on the screen. Pressing F3 will Esc this 'break' and continue with the process. I am unable to determine why this error is breaking on the screen and which orders are not getting deliveries created. Has anyone come across this before? and how did you resolve/fix the error? I am unable to find a OSS Note on this.
Thank you Janelle

Does this message has a class and a number (e.g. V2 100)? If so, you could set up a watchpoint in debugger for it and see where it appears...

Similar Messages

VL10* Update Control message breaks

When processing VL10A or VL10B in 'Background' a random 'Update Control' message will break on the screen. Pressing F3 will Esc this 'break' and continue with the process. I am unable to determine why this error is breaking on the screen and which orders are not getting deliveries created. Has anyone come across this before? and how did you resolve/fix the error? I am unable to find a OSS Note on this.
Thank you Janelle

Does this message has a class and a number (e.g. V2 100)? If so, you could set up a watchpoint in debugger for it and see where it appears...

Disable the update prices Tab while processing PO in SUS

Hi,
I need to Disable the update prices Tab while processing PO in SUS.
Please advise.
Thanks in Advance,
Manu

Best would be to do the following steps-->
1) for the vendor user --> check the roles assigned
2) for each of the role which you have assigned to the vendor user ---> go to PFCG ---> enter your role
---> Click on display ---> go to authorization tab ---> click on display authorization data -->
find out --> SUS ---> access to documents in SUS -->
there will be one activity --> display prices ---> this should be disabled , then the button will not be shown.

Mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4

Hi,
We use FMS 4.5.1 for streaming MP4 (H264/AAC) live streams to flash clients and iPads. Occassionally iPad viewers get error messages indicating that the video cannot be played. On these occasions we see error messages like this in our Apache logs:
mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4/events/noordoostpolder_1/liveevent/livestreamNum4390.ts
Strangely enough this error message cannot be found anywhere in Adobe's documentation or anywhere else on the net (or perhaps I haven't searched well enough...)
Has anyone else here encountered this problem and/or does anyone have an idea as to what causes these messages and this problem?
Message was edited by: GRO-NIC: Does anyone have any idea? And/or can someone from Adobe respond? We are still receiving complaints from several of our customers about this.

Hi,
We use FMS 4.5.1 for streaming MP4 (H264/AAC) live streams to flash clients and iPads. Occassionally iPad viewers get error messages indicating that the video cannot be played. On these occasions we see error messages like this in our Apache logs:
mod_hlshttp [500]: Invalid timestamp found in the message while processing /hls-live/streams/rd-mp4/events/noordoostpolder_1/liveevent/livestreamNum4390.ts
Strangely enough this error message cannot be found anywhere in Adobe's documentation or anywhere else on the net (or perhaps I haven't searched well enough...)
Has anyone else here encountered this problem and/or does anyone have an idea as to what causes these messages and this problem?
Message was edited by: GRO-NIC: Does anyone have any idea? And/or can someone from Adobe respond? We are still receiving complaints from several of our customers about this.

How do I prevent the "update available" message while I'm watching a program?

My 2011 Mac Mini is connected, via HDMI, to my 46" Samsung HD TV. I buy and rent 1080 movies and TV shows from iTunes. I also play a lot of other files that I've downloaded from other places. It's terrific except for one fly in the ointment...
No matter what I'm watching, iTunes, NetFlix, VLC, Quicktime or straight off the desktop; if there is new software available, I get that annoying message that appears in the upper right hand corner. I can slide it to the right but it comes back a few minutes later. I could stop everything and perform the upgrade 10 to 30 minutes later but is this really the way video on a Mac is supposed to work? I feel there should be a way, at least, to pervent this from happening when I'm watching a program/movie/TV show. If it happens between, fine but why does it always have to pester me when I'm trying to enjoy watching T.V.?
I know there is a way to turn it off, for the day, but come on- There's got to be a better solution than that. My U-Verse box very rarely bugs me about things. OSX and/or iTunes does it ALL the time. Can't it give me a break when I'm watching T.V.?
Hopefully, I just missed some setting but I've tried a few things that didn't work.
This is not a disaster but if someone knows a solution, I would be very grateful!
Thanks!
Teddy

Mende1,
Thanks for the super-fast response!
I believe I tried this once before but the check box for "Automatically check for updates" always comes back, the next day. However, this might be my best solution for now and I'll test it watching the latest "Ripper Street", in iTunes, tonight. If it lasts the length of the program, I'll have to decide if I want to select "This solved my question" or "This helped me."
I think I expected Apple to be a little more inTune with this. I absolutely love watching programs with my Mac Mini via HDMI. If they could find a consistent way to not interrupt programs, even with "Automatically check for updates" checked, the Mac video experience would be nearly perfect.
I do make sure to perform updates but, between my wife's Mac and my two, plus the fact that updates seem to be occuring on a weekly basis, it's not easy to update immediately. I just feel that if a person is watching a movie or T.V. program, it's very clunky to have the "update available" message continuously appearing.
Thanks again!
Teddy

Message while processing Adobe form

Hi,
         I am trying to display error message while running through an adobe form. Am using the below code to display the message but its running through the code and not display any kind of message. Just wondering if am missing any thing.
DATA message_handler TYPE REF TO cl_hrbas_message_list.
DATA: message_dummy1 TYPE string.
DATA new_message TYPE symsg.
CREATE OBJECT message_handler.
MESSAGE e115(z_msg) INTO message_dummy1.
MOVE-CORRESPONDING sy TO new_message.    u201Cgetting the desc of msg. in new_message
CALL METHOD message_handler->if_hrbas_message_handler~add_message
                  EXPORTING
                    message = new_message.
Thanks,
Kumar

Hi,
I have used the same kind of code as shown below. For me it triggers perfectly.
data :      MESSAGE TYPE SYMSG,
                 MESSAGE_DUMMY TYPE STRING.
MESSAGE E003(Z_EE_TEST) WITH INTO MESSAGE_DUMMY.
          MOVE-CORRESPONDING SY TO MESSAGE.
          MESSAGE_HANDLER->ADD_MESSAGE( EXPORTING MESSAGE = MESSAGE ).
          RETURN.
Also please confirm whether the message class has been created correctly.
Regards,
Prabu

How to display a modal message while processing in a thread.

I have difficulty in display a modal dialog while in processing in a background.
I have created the following class.
package fedex.screen.component;
import java.awt.*;
// This infobox is a modal dialog which display static text and stay
// on screen without blocking proceeding code from execution and can
// only close by issuing close method.
public class ProcessInfoBox implements Runnable
 // Display dialog box
 private InfoBox dialog = null;
 // Thread to enable showing of Dialog Box
 private Thread thread = new Thread(this);
 // Determine if to close dialogbox
 private boolean isFinish = false;
 public ProcessInfoBox(Frame frame) {
 dialog = new InfoBox(frame,"Performing Operation","Processing...");
thread.setPriority(Thread.MAX_PRIORITY);
 public void setTitle(String title) {
 dialog.setTitle(title);
 public void setText(String text) {
 dialog.getMessageLbl().setText(text);
 // The reference return will be ProcessInfoBox.InfoBox
 public InfoBox getInfoBox() {
 return dialog;
 // Thread method
 public void run() {
 dialog.setVisible(true);
 // If true return from thread and exit.
 while ( isFinish == false )
 try
 Thread.sleep(500); // 500 msec
 catch ( InterruptedException e )
 // Start showing dialog
 final public void show() {
 thread.start();
 isFinish = false;
 final public void hide() {
 isFinish = true;
 dialog.setVisible(false);
 // Dialog box which show text.
 public class InfoBox extends Dialog
 private Label messageLbl = new Label("Processing ...");
 public InfoBox(Frame frame, String title, String message) {
 super(frame,title,true);
 initInfoBox();
 public Label getMessageLbl() {
 return messageLbl;
 private void initInfoBox() {
 setLayout(new BorderLayout());
 add(messageLbl,BorderLayout.CENTER);
 setSize(250,150);
FormUtility.centerForm(this);
 public static void main(String[] args) {
 Frame frame = new Frame("BigMac");
 frame.setSize(600,600);
 frame.setVisible(true);
 ProcessInfoBox box = new ProcessInfoBox(frame);
 box.show();
 for ( int i = 1; i < 10000; i++ )
 System.out.println(i);
 box.hide();
To test the code I used the following section to test
The main method in the class is used. In the simple
example, the message did correctly update itself while
i is increment. However, when I try on more complex
application, the message just stalk there without
updating itself as it is hanging.
I have try to set piority to highest but without effect.
Is there anything to rectify the situation
thank

The "please wait" dialog is a modal dialog. When u
show it, the following code can not executed!
That's the problem

Want to show a "Please Wait" message while processing

Hi,
I'm developing an image-processing tutorial applet where the user selects an image and then sets some parameters before pressing an update button which will run a JPEG compression on the image and show the compressed image.
The compression takes a few seconds, so I want the program to show an image saying "Please wait" in the position that the compressed image will appear while the compression is done.
Here is the relevant code:
public void paint (Graphics g) {
if (updating) {
    updating = false;
    g.setColor(getBackground ());
    g.fillRect(575, 370, 250, 250); //clear the area where the image will appear
    g.setColor(Color.white);
    g.drawImage(updatingImg, 575, 370, 250, 250, this); //updatingImg just displays a "Please Wait" message
    doImage = true;
if (doImage) {
    doImage = false;
    //perform the compression to get the new image and then show it
    newImg = imagetest.compressImage(origImg, quantizationMat);
    g.setColor(getBackground ());
    g.fillRect(575, 370, 250, 250);
    g.setColor(Color.white);
    g.drawImage(newImg, 575, 370, 250, 250, this);
public void actionPerformed(ActionEvent evt) {
if (evt.getSource() == update){
    //perform some error checking
    if (errorFound == false){
      updating = true;
      repaint();
}The problem is that the "Please wait" image never gets shown.. while the compression is carried out that part of the screen remains blank and then the new image is shown.
Can anyone tell me how to fix this?
Thanks.

Never mind, I've figured it out.. needed to put the time consuming code in a new thread.

Express Document:Update was terminated while processing the Order via VA02.

Hi,
User was trying to process order for orderlines say for Eg POSNR 20 to 400 for a particular order,He ended up with Express document :Update was terminated error.When i Checked in SM13 for the update termination errors,I got the following error.
VI: 200 Item status (document &, item &) is missing.
I checked the order (POSNR 20 to 400 ) in VBUP table and the entries were missing for this order (Posnr 20 to 400 ).
Appreciate you'r Inputs.
Thanks
Rakesh.

Hi,
Can you please send the detail message in express document.
Apps

Display a message while processing

Hi,
I am processing a lot of files and it take some time to do it. I want to display a message when a file is processing. And one message when the process of all files is finished.
LOOP AT LT_FILES.
CONCATENATE 'File processing: ' LT_FILES-NAME INTO LV_MSG
MESSAGE LV_MSG TYPE 'S'.
PERFORM F_PROCESS_FILE USING LT_FILES-NAME.
ENDLOOP.
MESSAGE 'The files are been processed' TYPE 'S'.
But it doesn't show anything while the files are been processing, just at the end the last message appears. Someone knows how can I do this? Like parallel tasks or something like threads?
Regards,
Isaac Melendez

Hi,
Try using the FM
Increase the percentage for each loop
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
              EXPORTING
                PERCENTAGE = 50
                TEXT       = text-025.

Error Message while processing in invoice verification

I am getting a error message as " Address doesn't exist 22983".
Can someone let me know why it is coming and how to rectify it?

The address was already present. There was use of t code SM34 by a user which has made modification in the plants and vendors. And now when I try to open the change vendor transaction, there is a runtime error.

Mysterious message while processing PO in SRM 4.0

Hi
We have a proxy communication between SRM 4.0 and XI 3.0 setup inorder to send out approved POs to vendors from SRM through XI.
The SRM business system has been setup in the SLD with the proper logical system name attached to the business system defn on the SLD -depicting the backend SRM system. The SLDCHECK done from the SRM system works fine and returns the name its entry from the SLD. The entries in SLDAPICUST also looks fine.
When we try to send out a PO from the SRM system - we get the following error message :
An SLD system has not been assigned to logical system QBHCLNT180
Any idea as to what we are missing here ?

Hi
Thanks for your quick response. Yes, SRM system's logical name was there in the SLD' entry of the SRM business system . There is no problem in the SLD entry for the SRM business system.
For some strange reason, SAP has provided a configuration mapping between the SRM logical system and its business system name - this mapping entry has to be maintained as a part of the SRM config ( SPRO -->)why ?? why do we have SLDCHECK, SLDAPICUST etc - inorder to facilate SRM box accessing the central SLD ??
Anyway , that backend mapping is being referred when the PO is sent out - inorder to for the SRM system to get its business system name - to be passed on the outbound proxy message header....

Error while processing csv file

Hi,
i get this messages while processing a csv file to load the content to database,
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL;
data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
[SSIS.Pipeline] Warning: The output column "Copy of Column 13" (842) on output "Data Conversion Output" (798) and component
"Data Conversion" (796) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
can someone please me with this.
With Regards
litu Here

Hello Litu,
Are you using: OLEDB Source and Destination ?
Can you change the source and destination provider to ADO.NET and check if the issue still persist?
Mark this post as "Answered" if this addresses your question.
Regards,
Don Rohan [MSFT]
Regards, Don Rohan [MSFT]

Error occured while saving trade promotion if a control message is given

Hi all,
While creating a trade promotion, we want to control the products and if there is/are not available for our criteria, we want to give an error message and stop the application. I put this control message in the BADI ( EXEC_METHODCALL_PPF -> method : EXECUTE ) that generates a form for the event. In GUI there is no problem, it gives the error message and stops. But in PCUI if this message is given, error page appears like that :
Message E SPPF_MEDIA 052 cannot be processed in plugin mode HTTP
Class -> CX_SY_MESSAGE_IN_PLUGIN_MODE
Program -> CL_CRM_BSP_FRAME_MAIN ==...CP
ABAP Class -> CL_CRM_BSP_FRAME_MAIN
Method -> DO_REQUEST
thanks,

Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ). You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ). You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart. Your RAM requiremnts may be as low as 256mb, but that is just a starting put. You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open. Deleting the Illustrator Prefertences file may not be necessary in your case. Setup the scratch disks first.

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

Update Control message while processing VL10*

Similar Messages

Maybe you are looking for