Update customizing table on the production

Hi all,
Ik maked a customizing table on the development environment.
Evert time i need to update the data of this table , then i have to do it on the development and then tranport it to the production via a transport request.
Is it possible to change this (setting) table in the production, without using the transporting request ?
I changed the properties of the table from C (Customizing)
to A ( Application table), but it doenst help.
Anyone have a suggestion ?
Thanks,

Goto Development system-> again change settings from C to A,use database utility ->activate and adjust database.
now delete table maintaince and re create table maintaince,now transport your request to production,it should be fine now.
Thanks
Seshu

Similar Messages

  • Best way to update custom table

    Hello experts,
    Iu2019m writing a report program and after pulling data from a custom table Iu2019m modifying certain fields within internal table and then eventually update custom table. The way Iu2019m updating custom table is working fine. However Iu2019m concern about performance issues because Iu2019m doing update on custom table within loop.
    Here is my code for reference.
    *&      Form  update_contracts
          text
    -->  p1        text
    <--  p2        text
    FORM update_contracts .
    Update record in an internal table first
      loop at izsc_compliance into wa_zsc_compliance..
        wa_zsc_compliance-zapproval = c_accepted.
        wa_zsc_compliance-CHANGED_DT = sy-datum.
        wa_zsc_compliance-CHANGED_TM = sy-uzeit.
        wa_zsc_compliance-CHANGED_BY = sy-uname.
        modify izsc_compliance from wa_zsc_compliance index sy-tabix.
        write:/ sy-tabix, wa_zsc_compliance-vbeln_new, wa_zsc_compliance-zapproval.
        if p_test is initial.
          move wa_zsc_compliance to zsc_compliance.
          update zsc_compliance.
        endif..
      endloop.
    Write records to database
      if p_test = 'X'.
        skip.
        write:/ 'Test mode'.
      endif.
    ENDFORM.                    " update_contracts
    Iu2019m not certain if there is any better way by not doing update within loop and update custom table outside this loop.
    Many thanks in advance.

    Hi,
    Yes, there is a better way to update the custom table. That will be more performance oriented and will be a much cleaner approach. As, I am not much aware of the custom table structure which you have in your program, the best way that I can suggest is to remove the update statement from that check. I guess you are checking against the mode - test or production. Once you have done the check, put the selected entries in an internal table which is same as database table. And then in a single command - a single array operation as it is commonly called, you can update the custom table.
    Have a look at the following link
    [Overwriting Several Lines Using an Internal Table|http://help.sap.com/saphelp_bw33/helpdata/en/fc/eb3a94358411d1829f0000e829fbfe/content.htm]
    [Inserting or Changing Lines|http://help.sap.com/saphelp_bw33/helpdata/en/fc/eb3ac8358411d1829f0000e829fbfe/content.htm]
    You can also scan the forum for multiple links and references and sample examples.
    Hope this will help. The above approach will be much more performance oriented and will help to optimize. Also, check where exactly you are providing the locking feature if at applicable in your business functionality.
    Regards,
    Samantak.

  • I want to update the Custom table using the data available in ITAB.

    Hi,
    I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
    I want to update the custom table using the itab data How is it possible?
    Is any possible by using Modify ?
    DPK.

    example here
    modifying datbase table useing internal table
    advises before updating this datbase table plz lock that table to avoid incosistency
    write the logic for modifying
    Modify the database table as per new dunning procedure
    MODIFY fkkvkp FROM TABLE lt_fkkvkp .
    and finally unlock the table
    example
    *To lock table for further operations
    constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
    CALL FUNCTION 'ENQUEUE_E_TABLE'
    EXPORTING
    tabname = lc_tabname
    EXCEPTIONS
    foreign_lock = 1
    system_failure = 2
    OTHERS = 3.
    IF sy-subrc EQ 0.
    To fetch all the contract accounts for customers of the segment
    Households/SME.
    PERFORM fetch_contract_accounts using lc_tabname .
    ENDIF. " IF sy-subrc EQ 0.
    *wrote the logic
    Modify the database table as per new dunning procedure from internal table
    MODIFY fkkvkp FROM TABLE lt_fkkvkp .
    *unlock the tbale
    CALL FUNCTION 'DEQUEUE_E_TABLE'
    EXPORTING
    TABNAME = uc_tabname .

  • Not Updating Customized Table when System having Performance Issue

    Hi,
    This is actually the same topic as "Not Updating Customized Table when System having Performance Issue" which is posted last December by Leonard Tan regarding the user exit EXIT_SAPLMBMB_001.
    Recently we changed the program function module z_mm_save_hide_qty to update task. However this causes more data not updated. Hence we put back the old version (without the update task).  But now it is not working as it used to be (e.g. version 1 - 10 records not updated, version 2 with update task - 20 records not updated, back to version 1 - 20 records not updated).
    I tried debugging the program, however whenever I debugged, there is nothing wrong and the data is updated correctly.
    Please advise if anyone has any idea why is this happening. Many thanks.
    Regards,
    Janet

    Hi Janet,
    you are right. This is a basic rule not to do any COMMIT or RFC calls in a user exit.
    Have a look at SAP note 92550. Here they say that exit EXIT_SAPLMBMB_001 is called in the update routine MB_POST_DOCUMENT. And this routine is already called in UPDATE TASK from  FUNCTION 'MB_UPDATE_TASKS' IN UPDATE TASK.
    SAP also tells us not to do any updates on SAP system tables like MBEW, MARD, MSEG.
    Before the exit is called, now they call 'MB_DOCUMENT_BADI' with methods MB_DOCUMENT_BEFORE_UPDATE and MB_DOCUMENT_UPDATE. Possibly you have more success implementing the BADI.
    I don't know your situation and goal so this is all I can tell you now.
    Good luck!
    Regards,
    Clemens

  • Need MIGO BAdi to update custom table

    Hi Experts,
       I have to update a custom table after the GR is successful against PO in MIGO transaction.
    Which BADI will be suitable to this. Or is there any other way to do this?
    Thanks and regards,
    Venkat.N.

    Hi,
    You can use the badi MB_DOCUMENT_BADI and method MB_DOCUMENT_UPDATE.
    Regards,
    Nagaraj

  • Updating custom table through table control in module pool

    Hi
    I am entering a data in the module pool screen in a table control . The functionality is that whatever i enter in a row gets updated in a custom table in the database with the same values . My problem is that when i enter some values and press the save button on the module pool screen , the data gets updated on the table but gets invisible from the module pool screen . The user wants the data to be displayed even after it has been saved ..if anyone can help on this ...
    thanks

    hi,
    Check whether u have activated the report and screen.

  • I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

    I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

    You might try resetting the App Store application and clear the cookies via this menu:
    as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
    OT

  • How to mark a customizing table in the list of the SPRO?

    Hi all,
    I would like to highlight specific customizing table in the list that is presented within the SPRO transaction.
    How is it possible?
    (The highlighted table name should be sent as an input so maybe by evoking a user event)
    Thanks,
    Roy

    Hi Roy,
    I don't know any simple way. But you may try to add and maintain new custoimzing nodes using transaction SIMGH - many things are possible that way. Play around!
    Regards,
    Clemens

  • Updating two tables at the same time

    Please,
    Does someone have an idea on how to update two tables at the same times?
    Thanks a lot in advance

    I was thinking about a single session and single update command.
    That's why I thougth someone else could have a clue.
    Thank you

  • Two forms that update differrent tables on the same page?

    I tried to add two forms that update different tables on to one page.
    Problem is when I do that the forms gives me an error saying the field does not exist. It's like it is trying to update one table with the other tables fields.
    As an example Say I have one forms that is for people table and another one that is the Jobs table.
    When I go to update the people table, it sends the data for the jobs fields too I get an error like the field job description does not exist.
    I have two different forms for these and everything.
    I would hope it is possible to have two forms that update different tables on the same page.

    I was trying the exact same thing, but i managed to work round it by setting the steps to hide one region, so the user would enter the form see one region submit the region then direct back to the same page with the different region visible and the original hidden.
    I don't know if this would be acceptable for you...

  • Creating Custom Tables in the Portal Database

    Is there a way to create custom tables in the portal database in EP6?
    Thanks,
    Melissa

    Thanks for responding, Nick.
    We want to be able to display informational messages on the logon page before the user logs in.  Currently we make changes to several ASP files in EP5 to display the messages.  We want to be able to give privileged users the ability to enter the message, enter start/end date, etc.  We want to do this in EP6 as well.

  • Custom Fields in the Product Master Data

    Hi Experts!
    I have to add some custom fields in the product master data on SRM and I also need to have this data to be synchronized with the same in ERP.
    After having added this fields, can you pelase suggest a way to syncrhonized them with the ERP? is there a BADI I can leverage as in CRM?
    Thanks in advance.
    Points promised.

    Hi,
    See these related threadS:
    Re: Replicating additional fields (R/3 4.7) to SRM product master
    Transfer Inforecord Conditions Scales  to SRM Product Master
    https://www.sdn.sap.com/irj/scn/threadmessageid=6669812#6669812
    Extending SRM Product Master
    BR,
    Disha

  • Need help- need to read a customer table from the payroll schema

    Hi gurus,
    I need to read an amonunt from a customer table in the payroll schema. Is it possible to input TABLE XXXX in the schema, or is impossible to read from a customer table?Do I need to create a report to upload the amount in an infotype?
    Thanks in advanced for for support!

    You should create your own custom operation (based on operation TABLE) to read your custom table from a Payroll PCR.
    If your custom table's name is longer than 5 characters, you may be required to use operations VAOFF and/or VALEN prior to your custom operation in the PCR.

  • Update EKKO table for the custom field through BAPI

    Hi Experts,
    I need to create an Custom field in EKKO table through Include Structure.
    Now I have to update that custom field in my program.
    I have gone through the following but could not solve my question.
    Update EKKO table
    User Exit for ME21 PO Creation at the time of saving--Urgent
    I don't need to update when I hit the save button or any thing
    I have the PO's which needs to be updated with that field...
    Any suggestions would be greatly helpful.
    Thanks,
    Chaithanya...
    <removed_by_moderator>
    Edited by: Julius Bussche on Jul 7, 2008 10:47 PM

    Hi Patrick,
    Sorry Patrick you are right.. The structure is at header level.
    I have made the changes still I could not achieve it.
    I have made the following
    In EKKO table I have append the structure with a custom field ZZBUY.
    Now I have also appended BAPI_TE_MEPOHEADER and BAPI_TE_MEPOHEADERX with the custom field
    ZZBUY.
    Here is my program
    Data: wa_bapi_poheader  type BAPIMEPOHEADER,
             wa_bapi_poheaderx type BAPIMEPOHEADERX.
    Data: it1_bapi_poheader  like BAPI_TE_MEPOHEADER,
             it1_bapi_poheaderx like BAPI_TE_MEPOHEADERX.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        PURCHASEORDER            = wa_DATA-ebeln
    *   ACCOUNT_ASSIGNMENT       = ' '
    *   ITEM_TEXT                = ' '
    *   HEADER_TEXT              = ' '
    *   DELIVERY_ADDRESS         = ' '
    *   VERSION                  = ' '
    *   SERVICES                 = ' '
      IMPORTING
        POHEADER                 = wa_bapi_poheader
    *    POEXPIMPHEADER           =
      TABLES
        RETURN                   = it_bapireturn
    it1_bapi_poheader-ZZBUY = 'X'.
    it1_bapi_poheaderx-ZZBUY = 'X'.
    it_extensionin-structure = 'BAPI_TE_MEPOHEADER'.
    it_extensionin-valuepart1 = it1_bapi_poheader.
    append it_extensionin.
    Clear  it_extensionin.
    it_extensionin-structure = 'BAPI_TE_MEPOHEADERX'.
    it_extensionin-valuepart1 = it1_bapi_poheaderx.
    append it_extensionin.
    Clear  it_extensionin.
       CALL FUNCTION 'BAPI_PO_CHANGE'
         EXPORTING
           PURCHASEORDER                = wa_data-ebeln
           POHEADER                     = wa_bapi_poheader
           POHEADERX                    = wa_bapi_poheaderx
    *      POADDRVENDOR                 =
    *      TESTRUN                      =
    *      MEMORY_UNCOMPLETE            =
    *      MEMORY_COMPLETE              =
    *      POEXPIMPHEADER               =
    *      POEXPIMPHEADERX              =
    *      VERSIONS                     =
    *      NO_MESSAGING                 =
    *      NO_MESSAGE_REQ               =
    *      NO_AUTHORITY                 =
    *      NO_PRICE_FROM_PO             =
    *    IMPORTING
    *      EXPHEADER                    =
    *      EXPPOEXPIMPHEADER            =
         TABLES
           RETURN                       = it_bapireturn
    *      POITEM                       =
    *      POITEMX                      =
    *      POADDRDELIVERY               =
    *      POSCHEDULE                   =
    *      POSCHEDULEX                  =
    *      POACCOUNT                    =
    *      POACCOUNTPROFITSEGMENT       =
    *      POACCOUNTX                   =
    *      POCONDHEADER                 =
    *      POCONDHEADERX                =
    *      POCOND                       =
    *      POCONDX                      =
    *      POLIMITS                     =
    *      POCONTRACTLIMITS             =
    *      POSERVICES                   =
    *      POSRVACCESSVALUES            =
    *      POSERVICESTEXT               =
           EXTENSIONIN                  = it_extensionin
    *      EXTENSIONOUT                 =
    *      POEXPIMPITEM                 =
    *      POEXPIMPITEMX                =
    *      POTEXTHEADER                 =
    *      POTEXTITEM                   =
    *      ALLVERSIONS                  =
    *      POPARTNER                    =
    *      POCOMPONENTS                 =
    *      POCOMPONENTSX                =
    *      POSHIPPING                   =
    *      POSHIPPINGX                  =
    *      POSHIPPINGEXP                =
    *      POHISTORY                    =
    *      POHISTORY_TOTALS             =
    *      POCONFIRMATION               =
    It gives me messages saying that
    Please also populate interface parameter POHEADERX
    No data changed
    Where am I going wrong..
    Waiting for your replies....
    Thanks,
    Chaitanya

  • User exit/BADI for updating custom table in MB1B transaction-

    Dear All,
    When performing a material to material conversion in MB1B transaction for  batch managed materials,system is creating a new batch by copying the characteristics of issuing material/batch.The details of the new batch created are updated in standard batch tables(MCH1,MCHA,MCHA).
    The requirement is when the new batch is created,the batch details and characteristics has to be stamped in a custom table.
    Kindly suggest a user exit/BAIi available for updating the same in the custom table.
    Regards,
    Deepak

    Deepak, Exits for MB1B are
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.

Maybe you are looking for