Update Firmware from 3.1 to 3.1.1

I'm using iphone 3Gs 32GB and firmware 3.1 and in the middle of update to 3.1.1. Please advise if there are problem using 3.1.1 firmware...

I'm sure some have had issues, but most never have any issue of any kind.

Similar Messages

HT1237 I have a iMac8,1. Am needing to update firmware from 10.5.8 to 10.6 or later.

I have an iMac 8,1. Am needing to update firmware from 10.5.8 to at least 10.6 for new printer. Help.

I'm afraid what you've asked about is not firmware. Rather it's OS X - the operating system.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Can't update firmware from 7.4.1 to 7.4.2

I have an AirPort Express with 802.11n, working fine. Every once in a while, AirPort Utility pops up and tells me that it found that AirPort Express and "This AirPort Express should be updated to a newer firmware version. Current Version: 7.4.1 Available Version: 7.4.2"
So, I click on Update Firmware... and it seems to do it - meaning that it takes a few minutes, reports success, and restarts the Airport Express.
BUT - when it comes back up, it is still showing that it is running 7.4.1.
What can I do to get 7.4.2 on this AirPort Express? What's wrong?
Thanks!

I write in this thread because I think my situation is related, even if a bit different.
I had many problems with the update of my Airport Express. It started noticing I had to update the firmware to the 7.4.2 and but I've never been able doing it. As it worked fine even with the permament notification I didn't thought it was a great problem.
Then I update my OS from the 10.4.10 to the 10.6 all in one and started having more problems with my Airport Express which was constantly asking to update to the 7.4.2 but it wasn't possible in any way.
I checked this page in the Apple support
http://support.apple.com/kb/HT3486
and I updated the Utility Airport app to the 5.5.1 but it didn't help.
The worst level of problem is that I tried to link another two people (one with a mac 10.5 and one with a pc) to the wireless net and there was not access possibility.
After a reset of the airport the utility app was almost totally blocked and closed the access even from my mac notifing that my WAP password was incorrect.
At this time there are no ways to change this situation.
I'm trying to understand what's the real problem and - if someone has suggestions - how to solve it.

Updating firmware from 1.1 to 1.2

I just went through the process of trying to update our UCS from 1.1 to 1.2 via these 2 documents:
http://www.ciscosystems.sc/en/US/products/ps10281/products_configuration_example09186a0080af310f.shtml
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.1.1/to1.2.1/UpgradingCiscoUCSFrom1.1.1To1.2.1_chapter4.html
I managed to the the fabric interconnects, UCSM and IOMs updated but when I look at the installed firmware tab, I can see that all the "Server" components are still at 1.1.
I'm unsure as to whether I'm missing something here from the 2nd link listed above when it lists the following steps:
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Policies.
Step 3
Expand the node for the organization that includes the policy you want to update. If the system does not include multi-tenancy, expand the root node.
Step 4
Expand Host Firmware Packages and select the policy you want to update.
Step 5
In the table on the right, do the following to delete the existing entry for the firmware you want to update:
Select the line in the table for the firmware version that you want to change.
Right-click and select Delete.
Click Yes to confirm that you want to delete that entry.
When I navigate to the "host firmware packages", I have no packages listed in there. How do I proceed in updating the servers? I've attached a screenshot of what I see in the installed firmware tab. Thanks.

Hi Terence,
We usually do it "manually", one blade at a time.
You have to go to Equipment->Server to work one server at a time. When in Server view, go down to "Installed Firmware" and open "Update Firmware": select 1.2 as the "Backup Version" (I see you already did it).
When GUI says "ready" under "update Status" column, you can go on to click on "Activate Firmware": at THAT time the blade will reboot, placing previous 1.2 "Backup Version" to the new "Running Version".
Is it the answer you were looking for, or you wanted a method to do it automatically ?
Bye
Daniele

Where can I find detailed instructions for adding updated firmware from my computer to my Canon 6D?

I have downmloaded the latest firmware for my Canon 6D to my computer. I cannot find detailed instructions to add the firmware to my camera. Do I use the USB port and cable from the computer to the camera? It must be simple but I cannot seem to find instructions and I do not want to make a mistake.
thank you

From the download site:
Firmware changes:
Firmware Version 1.1.4 incorporates the following fixes:
1. Fixes a phenomenon in which some images cannot be transferred to mobile devices running the EOS Remote app.
2. Corrects an error in the German language Feature Guide.
3. Corrects an error in the Korean language Feature Guide.
Firmware Version 1.1.4 is for cameras with firmware up to Version 1.1.3. If the camera's firmware is already Version 1.1.4, it is not necessary to update the firmware.
Please note:
After the firmware update has been performed the following setting will be reset to default.
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount
When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.
Q&A:
Preparations for a firmware update:
Windows
After the downloaded compressed file (.zip file) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
The extracted folder contains the firmware (File name: 6D000114.FIR, File size: 21,276,940 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Updating Firmware from a Guest Computer

Can I update my iPhone 3G to 2.2.1 from a friends laptop? I am away on vacation and do not have my MacBook Pro with me to update the iPhone, but my friend just updated his via his Windows Laptop.
Was wondering if I could use his Windows PC to update my iPhone 3G's firmware. I do not want to sync my iPhone to his iTunes library but only update the firmware to version 2.2.1. On a side note, I have a MacBook Pro that my iPhone is synced with and my friends laptop is a Dell machine. Not sure if this makes a difference in case my iPhone is mac formatted vs pc formatted.
Any feedback or past experience from others would be helpful.

When do you plan on returning?
An iPhone is not Mac or Windows formatted. Contact info, calendar events, and Safari bookmarks can be synced with the supported applications on multiple computers - even between a Mac and PC without any special re-formatting required.
Although installing a firmware update on a guest or different computer shouldn't be a problem, what if there is a problem with the firmware installation? You could lose all iTunes content and photos transferred from your MacBook to your iPhone. If you can live with this if a problem arises that requires restoring your iPhone with iTunes on this Windows PC which is not the computer that you normally sync your iPhone with, go for it.

Can't update firmware from 2.0 to current after factory reset.

I'm selling my Apple TV first generation. Did a factory restore to wipe it. Now when checking for update (present firmware is 2.0) it says software is up to date.
Any help?
Thanks

Figured it out. I was logged into my guest network account. Not enough access. Switched to my regular network account and now it works fine.

Can't update Firmware from 7.6 to 7.6.1

Utility Connects to device, asks for my password, then says "An Error Occured while trying to access the Apple wireless device. Make sure your network connection is valid. (all other network commands are working fine). Using Airport Extreme as a Bridge through ATT U-Verse

Start with a Factory Reset then....

Must update firmware before installing OSX Tiger on OS9

I'm trying to bring an iMac G3 with OS9 to life. It's brand new, never been used before, and doesn't yet have internet. I will get internet (Airport Card) soon, but first have a software update problem.
After starting the iMac, I have inserted the install DVD for Tiger. The computer says it must restart to install, and when it restarts, the computer says it must update firmware before installing. I have to choose a system with which it will start up and my choices are:
OS9: Hard Drive
OSX: Install DVD
My 3rd option searches for a location, and ends up restarting in OS9.
Every option either results in the inevitable error message that the firmware needs updating or using the OS9 environment.
I read Apple support saying that firmware needs to be updated to fix this problem. Support suggests updating firmware from the OSX install DVD, but I haven't found such updates on the DVD, and need to overcome the firmware problem.
Please help, I am anxious to use my computer!
Thank you!
iMac G3 Mac OS 9.0.x updating to OSX Tiger

Hi, Kristine -
Welcome to Apple's Discussions.
You can download the firmware update you need from either of these Apple KBase articles -
Article #58174 - iMac: When to Install Available Updaters
Article #86117 - Firmware Updates
In order to install the firmware update, the machine must be booted to OS 9 on its internal hard drive. It's a good idea to have no external devices connected when you do it, other than the keyboard and mouse. If you can, print out the ReadMe that accompanies the update.

Urgent !! Help me to update firmware Nokia E63 (my...

My phone is Nokia E63. How to update firmware (offline) ? Coz my computer doesn't has internet connection !
Or, how to update firmware from my phone instead ???
Thank you.

Extremely sorry about the earlier post.. For your device.. its only possible thru' PC..
or you may get it done at Nokia Care I think...
http://www.nokia.co.in/support/download-software/device-software-update#
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Transferring firmware from phone to phone?

Hi all,
Does anyone know if its possible to transfer firmware from one 6120c phone to another? My friend got the updated firmware from a service centre when he was in the city. His phone works great now. Any chance of getting it on mine without driving 400kms to a service centre? Would be sooooo much easier if nokia would just put it on the net though....
Thanks.

http://europe.nokia.com/A4579163
http://europe.nokia.com/A4577229#faq1
Phone: N73 MUSIC EDITION
Firmware: V4.0727.2.2.1
04-07-2007 RM-133
Software update availability
http://europe.nokia.com/A4305060

I have a Lexmark Prevail Pro 705 printer connected to my network wirelessly. I can no longer scan from it using Image Capture. I can print to it. I can scan from it using a Windows machine. Most updated firmware. Driver v 11.0 Any ideas?

I have a Lexmark Prevail Pro 705. Latest (as of july 30, 2012) firmware. Mac driver v 11.0
I can no longer communicate wirelessly with the scan feature of the printer. I can print no problem using a wireless connection. Using a window's machine I can scan wirelessly from the printer. It seems that my iMac (OSX 10.8, 3.06 Ghz Intel Core 2 Duo, 24inch early 2009) is not connecting to it. I can put a USB cord into the computer and scan.
Any ideas? This came up starting 2 weeks ago. I had hoped the operating system upgrade would solve it. It has not. I see nothing on the Lexmark boards about this. Since the printer works fine in both print an scan mode using a windows machine and can print fine from a Mac but not scan I don't have any ideas but I suspect it is the Mac.

Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341

Woes After Updating E71 Firmware from 100.07.76 to...

I have owned Nokias for years and have had no issues updating firmware on the E60 then on the E51, but the E71-2 (NAM) is a terribly different story!
(1) First, I backed up via "Tools/Memory/Back-up phone memory," then a few minutes later backed up again via PC Suite; updated all necessary software on the PC; then used NSU via PC Suite to update the firmware. That went smoothly, but when I tried to restore from the memory card, lo and behold, there is no longer an option on the E71 to restore from the memory card! Is this intentional?
(2) When I then connected to PC Suite Backup, the only Restore options are "User files from the phone memory" and "Settings". I ran the restore, and no calendar, contact, etc. data was restored and none of the basic carrier settings were restored.
(3) All but one of my bluetooth devices are no longer recognized by the phone.
(4) Programs I had on the phone are gone, and several long-time programs won't reinstall or install fresh -- most notably Opera Mini. As to Opera Mini, I have tried the version I had on my E71 before the update, as well as older and newer versions, both via my PC and from opera.com. Every time, I get an error message "Cannot install."
(5) Speaking of "Cannot install," several dictionaries and other apps I had on the phone go through installation until about 80% of the progress bar is filled, and then pop up "Cannot install."
Has anyone else been having these issues? I searched and found several problems mentioned, but I couldn't find mention of the lack of a Restore option or the reinstallation problems.

Sad to hear that you are having problems with the firmware update wocius, me personally I have had no problems with the 200 update and I do believe my phone is actually working better than it did with the 110 update which I felt gave me more problems (no switching to wifi when at home using smartconnect and easy wifi, programs not installed properly after restore, messages missing after restore, a large number of restarts). I actually had to do the 110 firmware update about 3 times before I was satisfied with the results. My only suggestion is to redo the firmware update and hopefully it fixes it up alright.
Nokia E71-1 (254.03)
110.07.127
RM-346

Is it possible to update my iPod touch firmware from 2.2.1 to 3.0?

Is it possible to update my iPod touch firmware from 2.2.1 to 3.0?
Is it free or do I have to pay?

You'll have to pay a small fee.

Latest airport extreme would not update software from 7.7 factory installed to 7.7.1. keep getting an error of "An error occurred while downloading the firmware"

latest apple extreme would not update software from 7.7 factory installed to 7.7.1. keep getting an error of "An error occurred while downloading the firmware"

airport utility showed me these screens. this time able to post figs. but was able to update the software after couple of resets
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Update Firmware from 3.1 to 3.1.1

Similar Messages

Maybe you are looking for