Update IDM Account and Resource attribute

How can i update the resource attribute of users while updating their IDM account from file upload?

Hi
we have a similar requirement ?Were you able to solve it and how please let us know.
Thanks

Similar Messages

Initial Load and Reconcile of IdM accounts vs Resources. Any advices?

Hellos.
Time is now to begin the initial startup of Idm where target resources already have entries.
Is there anywhere an idiots guide explaining to a novice IdM user the steps involved in loading and linking IdM accounts for the first time? I have to stress the guide has to be designed to meet novices needs i.e. those doing it for the first time.
We are fairly confident in running IdM from day 1. What I am unsure about is the best techniques to employ on day 0 so that the first FF Async run on day 1 will update IdM accounts rather than attempt to reinsert them.
We have 3 target resources: 1 AD 2 LDAP and 1 input FF Async source (plus a form for manual adds/mods)
The targets hold a mix of contract staff and employees. The FF source holds just employees, the contactor's data is entered by hand.
Am I being stupid if I do the following:
1. Load IdM Accounts from latest FF source (employees)
2. reconcile matching AD accounts by name.
3. reconcile matching LDAP1 accounts by name.
4. reconcile matching LDAP2 accounts by name.
5. from unmatched AD accounts since an AD account must exist for current staff make 2nd load file for contractors and load these accounts into IdM.
6. reconcile matching AD accounts by name
7. reconcile matching LDAP1 accounts by name
8. reconcile matching LDAP2 accounts by name
9 examine the leftovers and manually correct the mispelt or erroneous ones treating the rest as ghosts.
I am unsure just what the reconciliation is doing, I hope it builds the links between IdM and the resource.
What I am trying to achieve is a situation where I end up at the end of day0 where I have all the Idm accounts in my repository and are correctly linked to resource accounts so that the FF async can manage the bulk of them
I believe this has to be done for every IdM implementation. What I am after is advice and pointers to guidance from those who have had the experience of going though the implementation cycle at least once.

I had a similar problem although I was doing a load from file and I was linking the account to the resource.
I noticed you had:
<Field name='accounts[ISA].created'>
<Default>
<s>true</s>
</Default>
</Field>
Try using the following instead:
<Field name='waveset.accounts[GrandSlamXML].created'>
<Expansion>
<Boolean>true</Boolean>
</Expansion>
</Field>
That is what worked for me.

Error "There was a problem updating your account" and now I can't use editor.

I've owned my adobe for 4 days now and yesterday I tried opening/editing a photo and it froze up and now will not allow me to do anything because of the error "there was a problem updating your account". After 4 phone calls of waiting a total of 74 minutes now, I'm a little disappointed at my new purchase & just need help. Anyone???

It's a rare day when Windows comes up with an actual solution to an error.
So, the editor is still shutting down but the message is now a general "an error has occurred and Photoshop Elements needs to shut down" message?
See if a reset of your application preference file fixes it.
Fastest way to reset preferences when using Windows:
http://graphicssoft.about.com/od/pselements/ss/10tipspse7_10.htm
Also it's good to look at what the splash screen is saying as it crashes. Usually, it's a good clue.
If by chance it crashes when reading twain, see this:
http://kb2.adobe.com/cps/408/kb408850.html
Edit: Added the link to Photoshop Elements 7 Windows Vista Editor Troubleshooting Adobe Doc.
http://kb2.adobe.com/cps/405/kb405398.html

Update iCloud account and apple id on iOS devices

Hello,
How to update apple id and iCloud account on my IOS devices after having changed them on my Mac ?
Thank you in advance

If you have 'Find My (device)' set up you have to log out of that with the old password - this may or may not work. If you don't have it set up you should be able to log out (on an iOS device: Settings>iCloud and click 'Delete Account' - this will not delete the account from the server).
If you are unable to do this you will have to contact Support. Go to https://getsupport.apple.com ; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' (this is probably the nearest subject available).

HT204053 . Is there a way to change/update icloud account and apple id

I recently changed email addresses, so I changed this in my apple account. This changed my apple id. When I did that, I can no longer get icloud to work. On my devices I am unable to change the account id for icloud, and I can no longer log in with my old password. how can I update the user name on my icloud account to match the updates in my apple account?

Welcome to the Apple community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

I changed my password several times to update my account and I am still unable to download any apps. Says acct was disabled?? I have done everything it says to do and still get this? What do I need to do??

I keep getting "acct. disabled" and I have changed my password like it said to! How do I get my acct. updated??

See if this helps. http://support.apple.com/kb/TS2446

I updated my account and now emails with photo attachments are being blocked

On Sunday I received something from y'all asking me to update and I did.
Now when I go to, say, Google, there is a little green icon besidethe word saying that y'all have checked it and it is safe.
More critical. my friend has tried to send photos to me every day since Sunday and they keep getting kicked back. Her inbox has been bombarded with messages that says I didn't ask for anything from her and that I am not accepting her email

Please restart the computer and try again.

Load from resource attributes.

Hello,
I want to do a Load from Reasource (IdM7). When I start it I specify my input resource (a db table) and a form which should process all the input records. The form, for each input record, creates a new user ad some accounts on assigned resources.
I am guessing how should I refer to the input resorce attributes inside the form: should they be referenced as accounts[INPUT-RESOURCE].attribute or something else?
TIA

I mapped accountID to CN. I changed it and mapped it back to uid
Thank you
Vivek Shashwat

ActiveSync - link resource account and password push

Is it possible to push a password from an IDM account to a resource account at the same time as linking the two accounts, during ActiveSync?
Scenario: I have an account in IDM and an account on a resource. I use ActiveSync to "discover" the account on the resource and link the IDM account with the resource account. At the same time I would like to push the IDM password to the resource. Thereby, synchronizing the IDM password with the resource password.
I have unsuccessfully tried to accomplish this in many ways:
1) Within the Admin GUI, I've edited an account and when I assign the resource to the account the password in IDM does not push to the resource.
2) Within ActiveSync, I have used global.password, password.password, password.confirmPassword, password.targets, password.accounts[resource].selected
NOTES:
- when the account exists on the resource and IDM links to the resource account, the password does not push
- when the account does not exist on the resource and IDM is required to create the resource account, the password is pushed
At this point my guess is that I will have to kick off a workflow to trigger the password push as the ActiveSync cannot handle linking and subsequently updating an attribute on that resource at the same time. Any ideas would be helpful. Thank you in advance.

I have been able to successfully push the password to the resource both during activesync and within the Admin console. However, I have found some inconsistencies with IDM that might need attention or an explanation.
First off, the key to pushing the password from IDM to the resource in the above scenario is....within the Resource Schema don't map IDM user attribute "password" but map an attribute such as "resource_password" to the password field on the resource. When I did this, I was able to provision the resource to the user in IDM and push the password to the existing resource account.
Secondly, there is an inconsistency with IDM and how it treats password and the other fields. I mapped lastname to a field on the resource. From the admin console, I edited the user and the only change I made was to provision the resource to the user (Resources tab). After saving this user, the lastname field from IDM was updated on the resource.
Why doesn't this work with password?

Reconcile Account and attributes

Reconcile provides the following output is there a way to configure IDM to also display attribute reconciliation data?
Account Index search results
|Resource Account Name|Resource Name|Situation|Owner|
My DB Table has a role column that I wish to reconcile against the users OU in Active Directory . We also have an extended attribute (SYS_ROLE) which was populated with the value of ADs OU. I am able to reconcile the users in my DB Table against IDM.
I would like to also reconcile the (DB TABLE)EMP_ROLE against the (IDM) SYS_ ROLE, Which would essentially show inconsistencies with AD and my DB table by showing me the inconsistencies with IDM and my DB table.
User accounts already exist and I am not looking to load from the DB table.
I have specified Reconciled Account Attributes in my Reconciliation Policy and have looked at defining an Account Index Report (does not allow the filter by attribute recon results)
Is there a way to accomplish this type of attribute reconciliation AND view the results/create csv?
Example data
AD OUs
cn=UserA,ou=Temp,ou=User Accounts,dc=example
cn=UserB,ou=Perm,ou=User Accounts,dc=example
cn=UserC,ou=Depro,ou=User Accounts,dc=example
DB Table
|EMP_ID|EMP ROLE|
|userA| Temp|
|UserB|Perm|
|UserC|Depro|
IDM Reposatory
|ACCOUNT_ID|SYS ROLE|
|userA| Temp|
|UserB|Perm|
|UserC|Depro|

HI,
To reconcile, FI with Costing based CO-PA, you can try report KEAT. If you are especially, trying to reconcile COGS (referring your posts in other threads), then you won't find any link to CO-PA document, as there is no posting to Costing based CO-PA at the time of PGI. Consider, building a Custom report using table VBFA (SD document flow), to find out documents which are not billed yet, but delivered. There are some standard SD reports to find out outstanding/pending SD documents:
VL06O     Review outbound deliveries for Goods Issue
VF04     Billing due list
VFX3     List of blocked billing documents
Periodically, business users should make sure they run these reports and clear pending/outstanding items to the extent possible. If any of the Deliveries are not billed, then your custom report should list out such pending documents to help in reconciliation.
Hope this helps.

How can I find the user that created a user account and the user who last updated the account

How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
I am using ADO commands and vbscript
ug3j

I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
Richard Mueller - MVP Directory Services

IDM schema and attribute mapping

As I understood from the documents - Identity manager doesn't store any data in local database.I have 60 attributes in resource-1 which needs to be flown to resource-2
==>As per my understanding, i will need to create 60 attributes in IDM as user extended attributes and do the mapping between Resource1 -- IDM -- Resource-2
==>But if I create this schema in IDM will it hold the whole data locally ?
Or will it hold the data between scheduled jobs for Resource-1 and Resource-2
==>Or I have to enable somewhere to store the data locally?
==>Also if there is any other option that I don't need to configure schema and attribute mapping ?
I am new to IDM so not sure how to configure the flow in better way.

First things first keep the extended attributes to the minimum in IDM
for your case
To get the values from one resource to the other you have to have attribute mappings in IDM for both the resources.
There is no need for storing them in the extended attributes just have a job that picks up the users data from resource 1 and push it to resource 2 if the user in IDM has both the resources linked.
Hope this works

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Io6 update deleted my mobileme account and all my emails and won't let me add it again. Does anyone know if there is a way?

I updated my iPhone 3GS with the new IO6 update last night and when it rebooted, my mobileme email account had been deleted along with all of my emails. I am unable to add the account again despite copying the settings on my ipad. There must be a way to get it back? I hope? Does anyone have any ideas?
I am using incoming mail server: mail.me.com this seems to be the problem as it will send emails using the smtp.me.com server.
I have also tried imap.mail.me.com, and smtp.me.com and mail.icloud.com and smtp.me.com Nothing seems to work but it could be something simple I've overlooked? Help would be much appreciated... any method of getting the emails to my iPhone would be fine by me.

Mobile Me was turned off months ago.

I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

Contact App Store support. They're the folks who can help with Account issues.
Regards
TD

Update IDM Account and Resource attribute

Similar Messages

Maybe you are looking for