BAPI_SCHEDULE_MAINTAIN throws error for time- independent scheduling agreement

Hi All,
I get the below error while modifying a stock transport Scheduling agreement in UI5 using BAPI “BAPI_SCHEDULE_MAINTAIN”
“Scheduling agreements with time-independent conditions are not supported”
Found a note 1046794-
"BAPI_SAG_CHANGE (and BAPI_SAG_CREATE) can only treat scheduling agreements with time-dependent conditions. Document conditions are not supported. Therefore, this kind of scheduling agreements cannot be processed. This is a missing functionality”
To meet some finance requirements, we need to use time-independent conditions in the scheduling sgreement, in order for a custom condition type to be picked up.
I'd appreciate any advice I can get about how to fix this functionality in the BAPI or alternatively how to link the pricing condition type to the Scheduling agreement document type?
Thanks so much.

Link between Time dependent / independent condition and Scheduling agreement document type is in configuration under SPRO>MM>PURCHASING>SCHEDULING AGREEMENT>DEFINE DOCUMENT TYPES>SCROLL TO THE RIGHT here you find a check box Time-D.C.
Thanks
DD

Similar Messages

Error in creating a schedule agreement

hi friends
i got an error in creating a scheduling agreement
the error reads- 'zjk5(the output type ) is not defined'
condition records,port definition,partner profiles everything is fine.
another error that reads is 'No communication data is set for medium 6ie edi'
please answer this problem.thanks is advance.

Hi,
Check the Output type was created or not for that Scheduling Afreement?
check the table T685 for that Output type?
And n the diocument have you configured the Output type with the correct medium (EDI value 6) and have you assigned the same in NACE tcode?
check
reward points if useful
regards,
Anji

BAPI for creating sales scheduling agreement

Hi All,
I have a scenario where i need to create a sales scheduling agreement using VA31. I have tried using a function module "SD_SALESDOCUMENT_CREATE". I am able to create the document by inserting the correct data in "SALES_HEADER_IN", "SALES_ITEMS_IN", "SALES_PARTNERS" and using the update flag as " I ".
When I try to insert data in "SALES_SCHEDULES_IN" the function module returns error message "No schedule line category could be determined during quantity adjustment".
please provide help in finding out the right procedure for creating the scheduling agreement with schedule lines data.
Regards.
Anurag

Hi,
Did you shown this to your functional team.
Regards,
Madhu.
Edited by: madhurao123 on Nov 21, 2011 3:29 PM

Error generating release against scheduling agreement

Need help in resolving the below error msg for Scheduling Agreement.
ERROR message:
"Error generating release against scheduling agreement (cause 2)"
"2: The forecast delivery schedule or the JIT delivery schedule was generated but no message record could be generated."

Yes.. its solved now...
problem areas:
1: delivery date not matching GR date.
solution: chng delvry date to GR date in ME38 and thn do GR.
2: Release not hapnd properly incase if u hav used doc typ LPA for JIT/Forcasting.
solution: in ME84, chk if the indicator for 'create release' is 'green' for ur SA#. In ME38, select the line and click on 'Release" icon. Select ur relevant delivery schudle line and click on JIT release or Forcast Release icon. See if the indicator is 'Green". If not, the issue is wit message output for the perticular delivry date. (use msg typ LPET process for output) MAKE SURE U SAVE THIS CHNG. Chk againg for the Release indicator for delivry line. If green thn.. its done..
Let me know if it was hlpful... or need clarity

Error generating release against scheduling agreement (cause 6) in ME38

Hello Experts,
Need your inputs on the the below error getting generated in ME38
Error generating release against scheduling agreement (cause 6)
Message no. 06857
Diagnosis
The function module for generating a scheduling agreement release (forecast delivery schedule or JIT delivery schedule) has run up against an error, causing processing to be terminated.
In this case the cause of the error is 6.
System Response
The error may involve one of the following situations:
1: The nature of the error cannot be specified precisely.
2: The forecast delivery schedule or the JIT delivery schedule was generated but no message record could be generated.
3: A document type for which the functions "Generate forecast delivery schedule" or "Generate JIT delivery schedule" are not defined may be involved.
4: A material for which the function "Generate JIT delivery schedule" is not defined may be involved.
5: A scheduling agreement that has not yet been released by all persons responsible may be involved.
6: The factory calendar has not been maintained correctly.
Procedure
Error source 1:
Check whether the vendor and plant shown in the PO actually exist in the system.
Error source 2:
Check the Customizing facility for message determination with respect to delivery schedules created under scheduling agreements (print operation '9').
Error source 3:
In Customizing, maintain the document types accordingly ( Define document types for scheduling agreement). Then create a new scheduling agreement with a document type for which release documentation is defined.
Error source 4:
Maintain the JIT delivery schedule indicator in the material master record.
Error source 5:
Have the scheduling agreement released by the person(s) responsible.
Error source 6:
If you are using a release creation profile without aggregation, you must maintain the factory calendar for the next 999 days
Regards,
Santosh

Hello Mallinath,
I referred the note and following are the observarion in the system.
Step1:Run T-code SE16 (table T001W) to check the calendar ID of the plant.
-----Referred the Calendor ID
Step2: Check the JIT/Forecast delivery schedule of release creation profile in customizing. (T-code OLME -> Scheduling Agreement -> Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.)
Run T-code SCAL to adjust the period of the calendar ID which checked in STEP 1 according to the JIT/Forecast delivery schedule of the release creation profile which checked in STEP 2.
(For example, if the JIT/Forecast delivery schedule of the release creation profile is "999" days, then the calendar should be extended for the next 999 days at least)
---------In this case factory calendor is valid till 2015 and according to note needs to change the factory calendor till 2018( or for 999 days) ?
Waiting for your inputs.
Thanking you,
Santosh

Error generating release against Scheduling agreement (Cause 2)

dear Sap Experts,
Please advise me that Error generating release against Scheduling agreement (Cause 2)
As i have already used transaction code OMQP and click print operation 9 for LPH1 & LPJI A,
How can i sort this problem.
Thanks
mohit

Hi,
pls find below thread
SA delivery schedule release problem
you have to Maintain condition records for LPJ1 and LPF1 in NACE
maintain condition record in transaction MN10 for schedule release. And Generally in the condition records will be maintained for LPH1 & LPJ1in MN10.
Once you maintain that, you can go to ME84 and ME38 release the schedule
the JIT indicator in MMR for your material.
Check that and also you can maintain a release creation profile in VMR or ME31L.
Regards
Raj.

Sap Error generating release against scheduling agreement (cause 2)

Hi,
Please help me on this issue
Error generating release against scheduling agreement (cause 2)
Message no. 06857
Regards
Amey

Hi,
For EDI you might be missing settings in:
1) Matrl Mng -> Purchasing -> Messages -> Output control -> Output types -> Define Message Types for Scheduling Agreement Release/Expediter -> Fine-Tuned Control: Forecast Delivery Schedule/Expediter (check one of the outputs for 9 and for A )
2) WE20 - EDI settings for partner that is a vendor who should receive your release information DELFOR / DELJIT (if you do not manage other EDI settings then also other WEDI setings should be maintained)
Best Regards,
Tomek

Customer Independent Scheduling agreements

I would like to know if we could do Customer Independent Scheduling agreements in SD. The reason is that we are receiving forecast from a third party tool, which is region specific. I would like to create a scheduling agreement a level above the customer for the entire region. Is this possible in SD. Any help will be greatly appreciated.
Thanks in advance,
Rishi

Hello Rishi
You need to use Flexible Planning / Sales and Operations Planning (SOP) to do this. May be you can use Sales Offices or MRP Areas to denote "Regions' and create plans for a product (material) or group in a custom Infostructure which includes that characteristic. Here is the link to SOP:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/632f3b43a211d189410000e829fbbd/frameset.htm
Hope this helps.

Pricing Procedure determination for Quotation,Contract,Scheduling Agreement

Hello All,
Plz let me know,how the pricing procedure(Both Item & Header Level) can be determined for Quotation,Contract,Scheduling Agreement.
Do let me know with configuration details.
Thanks
JP

Hi Jyoti ,
There isn't any separate pricing procedure for Quotaions , Contracts , Scheduling Agreement s..
The pricing which u normally find in PO derived from Vendor Master ( Based on Vendor Schema ) , hold good for the above purchasing documents.
Regards
Ramesh Ch

PGI Error Message for Stock Transport Scheduling Agreement Delivery

Hello,
I have created a delivery from an inter-company stock transport scheduling agreement. The stock is picked and TO confirmed, however, upon PGI of the delivery I receive the following message, has anybody and ideas of the root cause?
Message - E M7 153
Purchase order XXX does not contain items for a stock transfer
Thanks.

Make sure the items you are trying to deliver from the scheduling agreement have item category "U - stock transfer". If the item category is different, you will receive such error.
Hope this helps
Chandra Kiran

Goods Issue Error Message for Stock Transport Scheduling Agreement

Hello,
I have set-up an inter-company stock transport scheduling agreement, delivery is created and stock is picked. Upon PGI of the delivery I receive the following message, has anybody and ideas of the root cause?
Message - E M7 153
Purchase order XXX does not contain items for a stock transfer
Thanks.

Dear,
Please check vendor
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/help-with-config-of-one-step-sto-720045
Regards,
Syed Hussain.

Time-indepement Scheduling agreement with reference to contract

I want to attach pricing procedure to scheduling agreement, so I change LPA SA from time-dependent to time-independent.
But after the change, I can't reference contract to create SA. error message as below "Contr. release order only allowed for sch. agmts. w. time-dep. conditions".
How shoud I do to attach pricing procedure and create SA with reference to contract at the same time?

Hi,
please see the notes
160630 - Conditions in scheduling agreement with reference to contract
1046794 - FAQ: BAPI for outline agreement, questions 1 and 5
1034912 - MEMASSSA - document conditions are deleted
456691 - FAQ: Price determination in purchasing, question 4
Regards,
Edit

Inbound delivery for Sub-Contracting Scheduling Agreement

Hi All,
I am working on inbound delivery creation --> PGR for sub-assembly (Semi-finished product) which we receive from sub-contracting vendor through scheduling agreement. At time of PGR, it should do MVT#101 for sub-assembly and 543-O for raw components.
I already created JIT/FRC releases and did PGI (MVT # 541-O) for raw components. Now I am manually creating inbound delivery (VL31n) to post PGR. When I am doing PGR with VL60, I am getting below error.
Any help or suggestion please ?
As observation, I have seen that in inbound delivery I am only seeing sub-assembly (semi-finished) product. I am not able see "SC Component" tab which I have seen on other environment (ECC 6.0 with EHP4). Is it related to system limitation where we can't do PGR for sub-contracting ?
Thanks.

Hi AKPT,
Sorry if i miss understood but note 352243 says to refer note: 338119
"In the current release, it is not possible to process the components to be cleared when you post the goods receipt for the inbound delivery. (See Notes 338119, 197864 and 199703 also).
However when you implement these corrections, the error log is also displayed for the subitems to be cleared and further processing can be carried as described in Note 338119."
When I refer note : 338119, there is no correction. Am I missing anything ?
Again my issue is I am not able to perform Post Goods Receipt. Even after doing PGR, if system do 543 for raw component, I am fine.
Thanks.
Regards,
Ravi

Unnecessary Purchasing Processing Time in scheduling agreement

According to its business logic, the scheduling agreement is a document that has already been released by purchasing department, and its scheduling lines, that have been created by MRP are valid for goods receipt without any need for additional purchasing processing time. However, MRP scheduling incorrectly takes purchasing processing time into account (as defined in the IMG in plant parameters for external procurement - TCODE OPPQ) when calculating planned availability date. Please advise how to correct this issue.
Best Regards,
Itzik Eshed

This can be customized in
SAP Customizing Implementation Guide
-> Production
--> Material Requirements Planning
---> Planning
> Procurement Proposals
> Define External Procurement
Here you can select the indicator "Scheduling according to purchasing info record or agreement" either at plant or MRP group level.

Planned elivery time in scheduling agreement

Hi experts
problem is that the schedule lines (for external procurement) generated from MRP are not taking the "" Planned delivery time into consideration"". System is only taking the G.R processing time.
I have mentioned the Planned delivery time in .
1) Scheduling agreement for 1 day.
2) In material master for one day.
3) In info record 1 day.
e.g Suppose req date is 13.07.2008. MRP run date 4.07.2008.
a) Planned delivery time = 1 day . B) .r processing time = 3 days.
Now when i run the MRP on 4.07.2008.
Schedule line is generated on - 11.07.2008
Please Guide . How can i correct this.
Regards
Rahul Bhardwaj

dear colleagues,
please check in OPPQ , external procurement, and set the flag 'scheduling'
best regards

BAPI_SCHEDULE_MAINTAIN throws error for time- independent scheduling agreement

Similar Messages

Maybe you are looking for