Update my lead document user statusbased on the qualification level

Hi,
  I want to change my user status based on the Qyalification level.
I used Action Profile Set_Document _status. But i was not able to give the parmeter.
can any one sent the structure and field
With regards,
Selvam t

Hi Ed,
I realize a lead can be created from a survey but can the lead be updated from a survey?
Yes
How is the lead identified in the survey if the target group doesn’t hold this information?
Only the BPs [prospects] part of target groups will be updated. If prospects are not already existing in the system then you have to upload them through ELM - External list management, and then execute a campaign
How does the survey pass enough information for the lead to be identified and therefore updated.
As said above, when a campaign is executed, survey will be sent to the BP [target group] to his registered mail id and any response made by that BP will be updated.
Rgds
Hari

Similar Messages

  • Im trying to update db table in  user exit, with the internal table

    Im trying to update db table in user exit, with the internal table
    my scenario:
    loop at itekpo.
    updating itekpo -
    > at the end of user exit the db table ekpo have to be updated
    endloop.
    Im updating internal table, using 
    MODIFY itekpo TRANSPORTING INCO1 INCO2  WHERE ebeln = itekpo-ebeln
    where itekpo is internal table, but it is not updating the db table 'ekpo'.
    i also tried updating ekpo directly !
    Thanks in advance

    Hi,
    you can search in the forum itself,
    Try this link for instance
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=tocreateaBADI&adv=false&sortby=cm_rnd_rankvalue
    You can find a code for finding BADI as a report with the following Transaction
    finding badis
    How to find BADIs
    Reward if helpful
    Regards
    Byju

  • Copy of leading document(PO) not having the same data as created in SRM

    SRM5.0 Extended Classic Scenario
    I have created the SC and PO for that is created successfully as 700006304.
    Now when I am trying to create any SC after that, the leading document of EBP goes into error in process in follow on document block.
    All the successive PO 7000063041, 7000063042 are going into error in process and displaying another data in the backend with the creation of goods/receipt and invoice.When I try to go into that invoice it says that it doesnot exist.
    When I see in the backend found out that data that I have taken for creating the PO is not copied to ECC system , It displays some another data, may be fetching different PO data having confirmation and invoice detail which i have not done at the SRM side.
    As we know that the leading document of EBP (PO) is copied to the ECC system in ECS( Extended classic scenario) but in our case I am surprised that from where it is fetching the different data for the copy of leading document in backend.
    I have scheduled  the two background jobs too mentined below even then this problem is not corrected.
    1) BBP_GET_STATUS_2
    2) ZCLEAN_REQREQ_UP
    Kindly advice.
    Edited by: SAP jayoti on Jul 1, 2010 11:36 AM

    I have seen details in BBP_PD :-
    For first PO its displaying workflow status complete & Document Completed. Its fine.
    For the successive PO's  - Status is Transfer Failed (E.Sys). But workflow status is complete.
    I have checked the external number range at SRM and ECC side too.
    At SRM side ,Number range set up for PO
    From Number 7000000000 To Number 7999999999 Current Number 7000063059
    At ECC ,Number range set uo for PO
    No - 70, From Number 7000000000 To NUmber 7099999999 Current Number 'Blank'
    External munber range is set at ECC for SRM PO.
    There is no overlaps for the different document type PO range .
    Kindly Advice.
    Edited by: SAP jayoti on Jul 1, 2010 2:38 PM

  • Can't update MAC filtering in ServerAdmin/NetBoot at the Image level

    Strange business here.
    I have one NetBoot image, set as Default. It's enabled and diskless. Clients can NetBoot to it just fine - no problem. It's great.
    I have two NetInstall images, created successfully with the System Image Util. They're both enabled... but no matter what I do, clients don't see 'em and won't install from 'em.
    I think it has to do with filters at the Image level, but I'm not sure:
    On the NetBoot image - the one that works fine - the image filters are set to (model filter) "Allow Any Apple Computer" and (Mac Address) "Allow only clients listed below (deny others)." Thing is, nothing is listed under MAC address filtering... so WHY is this working for the clients? and why are the NetInstall images not working? They have the same Image-level filters in place.
    In fact, on the Image filter pane, no matter what I change, the changes aren't saved - when I click "OK," then go back into the pane, it's blank again.
    Everything's on the same subnet; there's no funky networking going on or anything like that. NetInstalls work(ed) fine from my Tiger server. Note that my DHCP resides on a separate Windows server. Since I've been able to NetBoot and NetInstall from my 10.4 machine, I'm not inclined to think the DHCP is at fault here.
    Oh - and one other tasty tidbit: in the Log files I see "can't open /etc/bootptab". This isn't entirely surprising since I went to /etc and there isn't a file or directory there by that name...

    Per image MAC address filtering, sadly, does not work. Although I don't believe it will interfere with anything, you're probably best off just leaving that action out of your workflow.
    Server level filtering works fine. If you need MAC address filtering, you'll have to do it there.
    One quick thing you can try... toggle something on the image (enabled state for instance) and click "save". This may reset bootpd if it has cached old data.

  • Custom Drill from the last level of Hierarchy

    I have a dimension hierarchy STAGE which has five levels L1 -> L2 -> L3 -> L4 -> L5
    and my fact table have 5 measure columns say M1 , M2 , M3 , M4 , M5 along with the dimension columns .
    My requiremetn is to show only the top level hierarchy and one measure column initially:
    L1 -- M1
    now user have to drill from L1 to L5
    L1 L2 M1
    L1 L2L3-- M1
    L1 L2L3--L4-- M1
    L1 L2L3--L4--L5-- M1
    by default when the user comes at the last level of hierarchy or the hyperlink to drill futrter gets disabled.
    Now my requirement is to show the detail report when the user comes at the last level and the there should be a link on it. when the user will clink on the last level link it should open below report :
    L1 L2L3--L4--L5--D1--D2--D3--D4--D5--M1--M2--M3--M4--M5
    D1-D5 are other dimension columns which are connected to Fact Table.
    Any suggestions??

    Abhiiiiiii wrote:
    Navigation is also a problem here since the column is coming coming runtime(after drill).What i told u is to use the navigation option insted of drill. So you need to create five reports each one for the particular hierarchy. and set the navigartion target as next level report in the hierarchy. Yes it is not the optiumum solution. But if you dont want the other two solutions given above you need to go with this only.

  • Non-admin user cannot access Essbase server level variables

    Version 11.1.1.3
    Essbase Substitution variables are created at server level. Users are getting error in FR report that uses the Subsitution Variable -- Essbase Error(1051085): You do not have sufficient access to get this substitution variable. Also, users cannot access Substitution variable in SmartView. However, users can access variables created at database level. Users are provisioned as "Server Access" to Essbase and filter access to ASO application "MGTRPTG", where MGTRPTG is an ASO essbase application for reporting. We tried the same provisioning in two other environments and it seems to be working fine.
    User is type "Essbase and Planning" provisioned with essbase "server access", application mgtrptg "filter", Reporting and Analysis "analyst", "dynamic viewer" and "Explorer". In addition, it is given a filter "REP_DME_GALB" which restricts 2 dimensions (Division and Geography).
    Steps taken to resolve:
    1. Existing users were deprovisioned and reprovisioned with no effect.
    2. Created brand new identically provisioned users in Prod and QA. QA user can access the server level var and Prod user cannot
    3. Created a brand new server level variable in Prod and this cannot be accessed.
    4. All services have already been restarted several times.
    5. SR has been opened.
    Temporary workaround:
    By creating a duplicate of the same set of variables at the database level, the reports work. This can only be a temporary workaround as the client cannot be expected to maintain two sets of substitution variables since there are 3 applications using these server level variables.
    Thank you for any ideas!
    Jennifer

    You have stumbled on a defect which is resolved in the Hyperion Planning 9.3.1 patch 6 and above. If you have your planning preferences set to indent members it will cause forms which have page selections to show as invalid in SmartView.
    You can either patch Planning or turn off the preference. The patches are available from http://metalink3.oracle.com and require account which has been associated with your client ID.
    P.S. Usually it's not a good practice to use the admin id.
    Regards,
    -John
    Edited by: Jbooth on Nov 3, 2008 2:12 PM

  • Lets get Apple to increase the audio levels again

    Hi everyone! Well, I sold my 2.16 C2D on eBay and I just bought the new 2.2 model. I broke even selling the old and buying this one. So I think its a great deal. Anyway, I'm happy with the new machine. Speed and everything else is the same to me but the graphics are killer. Way better than the 128mb x1600. So far I've only tried it out on call of duty 2 but I'm more than satisfied.
    So my reason for starting this thread is that we should all write to Apple's feedback section (which I can not find right now) and let them know that we would like the audio levels to increase again just like in 10.4.9.
    The audio was low up to 10.4.8, in 10.4.9 the audio was much louder, and in 10.4.10 it went back to how it used to be. Now I know why Apple did this. It was because of all the 24" iMac users who complained about the audio being way too loud on the lowest volume setting. I know exactly how loud it was- my brother is one of those 24" iMac users. Reverting the audio level makes sense for iMac users but for everyone else its a downgrade. Especially since Apple sells a lot more notebooks than desktops.
    A solution to this would be putting out a patch for just notebook users. Its really a major issue to me and I have not upgraded to 10.4.10 on this new machine because I'm in love with the fact of actually being able to hear the speakers on the MBP.

    Are you serious? I'm running 10.4.9 right now I can't hear anything on iTunes until the 2nd or 3rd volume setting. Yes, I have sound check and everything else off.
    Don't even wanna imagine what it will be like again when I have to go to 10.4.10.

  • Open_Leads fact sheet displays the "key" for Qualification Level

    Hi all,
    Adding the Open Leads fact sheet to my config...
    It actually displays the Qualification Level, but showing the KEY and not the description...
    Is there a note I need to implement to correct this?
    BP_FACTSHEET --> OPENLEADS
    Went to the context node and apparently the Lead's Qualification description is not returned.
    Anyone has noticed the same?

    >>Hi Shridar,
    >>You can define your own views under spro>CRM>Master Data>business >>Partner>buisness Partner Cockpit and Fact sheet-->Define Info blocks.
    >>Hope it helps.
    I am using CRM 5.2 and I can no longer find such menu items in SPRO:  buisness Partner Cockpit and Fact sheet-->Define Info blocks.  Do you have a t-code for it or another way of getting to it?  At some point I was actually able to get to Business partner cockpit and fact sheet.  But I am having trouble getting there.  Please advise, thanks!

  • How to update sales order number (KAUFN) characteristic in the profitability segment of the PA document created at the time of service entry sheet confirmation, as a result of shipment cost document

    Hi,
    We have a scenario wherein we create shipment cost documents against delivery. As a result of shipments fully transferred, a PO for freight vendor is automatically created and a service entry sheet confirmation happens. As a result of service entry sheet confirmation, we have Financial accounting, Controlling and profitability analysis documents created. We have a requirement wherein we need to have the characteristic “sales order number (KAUFN)” populated in the profitability analysis document created as a result of service entry sheet confirmation.
    Could someone please advice how could this be attained in COPA. Thanks for your help in advance.
    Regards,
    Sandeep

    Hi Ajay,
    Thank you for the quick update.
    The document is updated to COPA through OKB9 settings. The profitability segment is updated with fields like customer, product, company code, plant, sales area data, profit center, etc; however the sales order number is missing.
    Could you please elaborate further how could FI substitution be implemented to call for the FM COPA_PROFITABILITY_SEGMENT through user exit? Are you recommending the substitution through GGB1? What could be the possible validation to call for the user exit to be implemented?
    Regards,
    Sandeep Kulkarni

  • How to restrict update to a document in state release to the contribution g

    How to restrict update to a document in state release to the contribution group.
    Hi I’m working with UCM 10g and I want to know if it is possible to restrict the update over a document that is on state release for the group of users that made the check in of the document ?
    thanks

    Yes, it is, but IMHO in a rather complicated way:
    - you could change the security settings (security group, or more likely, accounts) during the life cycle, or
    - you could implement collaboration management, and change security settings via ACLs
    Alternatively, depending on what you mean by "updating" documents you could also:
    - check-out the document by a system account (if you want to prevent your users to check-in a new version)
    - modify the GUI so that Update (metadata) action is not available to users (in theory, they could still access it via a direct service call) by a custom component
    - introduce a Java event filter (enhancing the UPDATE service) where you will implement whatever logic you want
    I would probably opt for the last options as it seems to me to be the cleanest solution (but yes, it requires some coding).

  • OOTB workflow gives error when user rejects in the document in publishing a major version.

    Hi All,
    I am using OOTB workflow with little customization  with following configuration
    1. Allow content approval enabled
    2. Configure a workflow with following general settings true
    3. Start workflow on publish of Major version only is enabled
    4. workflow has following configuration enabled.
    Now, when user start publishing of major version and Starts the workflow. workflow starts without any problem.
    But as and when the user rejects the document it is rejected with Reject status with "Approval Status" as well as workflow status which is expected.(This is correct )
    But when i look at the workflow history i can see at last line there is an Error with
    An error has occurred in In [Workflow Name].
    Now when user check out and check in item again and try to publish with Major version again. it gives errors that the previous version is still running.
    I have trace a lot and also test with original OOTB workflow itself. it is behaving the same.
    As per my findings there is problem in "Completion condition of this task process" the end task process is not being executed correctly.
    I tried to end the task process with End the task process action but it is still not working.
    I need some help in this issue as users are facing problems in case of rejection. I hope some one has the solution for the same.
    Two things i have noticed are
    1. My MS office 2010 professional plus is expired as i was using trial version
    2. I have made stop inheriting tasks permission and remove all default groups as i have settings in workflow "Only allow task reception and process owner to read and edit workflow task"
    3. Earlier i had also installed "Sharepoint 2010 April 2012 updates". i had also observed that (installing Sharepoint 2010 April 2012 updates) before that if user has selected "Automatically rejects the document if any participant rejected". it ends
    with "rejected" status. At present it remains in inprogress and not stops with rejected status.
    Can any one give me a hint what should be the problem ? Is it a problem with latest Sharepoint 2010 April 2012 updates ?
    Thanks,
    S. M. MANIYAR

    I have done following testing.
    1. The server in which i have not installed sharepoint 2010 April 2012 updates the above scenario is working fine without any problem
    2. I have also observed following logs of error in server where April 2012 updates is installed.
    8/28/2012 03:51:41.33  w3wp.exe (0x0F08)                        0x0A00 SharePoint Foundation        
     Workflow Infrastructure        88xr Unexpected WinWF Internal Error, terminating workflow Id# 8bf7fef1-c92e-4b22-a16f-480425d3adc6 
    08/28/2012 03:51:41.33  w3wp.exe (0x0F08)                        0x0A00 SharePoint Foundation        
     Workflow Infrastructure        98d4 Unexpected System.InvalidOperationException:
    CompositeActivity cannot transition to 'Closed' status when there are active child context still exist for child activity.     at System.Workflow.ComponentModel.Activity.MarkClosed()     at System.Workflow.ComponentModel.ActivityExecutionContext.CloseActivity()    
    at Microsoft.Office.Workflow.Actions.OfficeTask.FinalClose(Object sender, EventArgs eventArgs)     at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)    
    at System.Workflow.Runtime.Scheduler.Run() 
    Following are last two lines of workflow history.
    S. M. MANIYAR

  • How to find out the oracle level user(sid) who is updating the table?

    Hi everyone,
    I am creating a update trigger which is to look for the user (sid) who is updating the rows in this table. Is there any lower level dynamic view or table I can use to find out the user?
    Thanks for any help.
    Jun

    Hi, please repost this question in the Database section under the SQL & PL/SQL discussion forum
    PL/SQL
    thanks - OTN

  • HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • I am trying to download the latest iTunes update.  Keep getting error message stating "The folder path 'My Documents' contains an invalid character".  I can't uninstall iTunes for the same reason.  HELP!

    I am trying to download the latest iTunes update; keep getting error message that says "The folder path 'My Documents' contains an invalid character".  This also happens when I try to uninstall iTunes.  HELP!

    OK, never mind!  I saw another question on the right side that addressed the problem, and it worked perfectly!  Went to Major Geeks' page, downloaded the Windows Installer Cleanup Utility, and was able to reinstall the updated version of iTunes!  This community is super!

Maybe you are looking for