Update package deleted from source folder

Hi
I have a problem where the Windows updates package I've downloaded are being deleted regularly. This also occurs for packages created by an ADR. As a result the deployment of updates fails.
An update package is created \\sccm\sources\updates\monthly updates
A day or two later the Monthly updates folder is deleted.
I've ran process monitor with a filter to capture the delete object item (SetDispositionInformationFile),
source, but the process isn't captured.
There's nothing recorded in wsyncmgr.log pertaining to the update package id.
The problem is similar to this
post in technet forums however I don't believe a migration wizard was used for this setup. Once the source files have been deleted I cannot simply download them again using the same package, I must create a new package.
I have a single primary site.
I'm at a loss as to why these updates are being deleted... Help!

I concur with Garth.
There must be some external process performing this action because ConfigMgr will not do this.
Did you happen to set WSUS to download content to the same folder when setting it up?
Also, wsyncmgr.log has nothing to do with ConfigMgr packages so you'll never see a reference to package ids in there. wsyncmgr.log simply shows the update catalog download from Microsoft by WSUS and then synching to the ConfigMgr DB.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Trash will not delete from trash folder! What can cause this effect?

Trash will not delete from trash folder! What can cause this effect?

u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
as chamar suggested look at http://www.thexlab.com/faqs/trash.html
i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
best of luck

File not deleted from the folder

Hi All,
Im executing file to idoc scenario.
my file processing mode is "delete" . But the file is not getting deleted from the folder but im getting success message in moni..
other communication channels which are using the same ftp parameters are executing fine ( i.e files are getting deleted and success msg in moni ).
the following is the error msg that i found in communication channel monitoring ...
Failed to delete file 'IF416AQ1n.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor.
please help me in this issue..
deepu.

Hi all,
Thanks for your replies..
Im using a file of size 230744 bytes of type dat.
time out: 600
poll interval: 300
retry interval : 120
i communication chanell monitering i can see the following message ..
Failed to delete file 'IF416AQ1.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor
file is not getting deleted.. what are the changes that i need to make ???

Once a older version of a program is uninstalled on a mac, can they be deleted from apps folder?

Once a older version of a program is uninstalled on a mac, can they be deleted from apps folder?

Did you use the Migration Assistant to help set up the new iMac using some of the files in the older PC? Some likely won't mean much, unless you have applications that can use or convert them. There's also a way to use the software Time Machine to import data files from an external or another computer, so you may have used that, too.
Hopefully someone with experience in a similar issue will reply...
Good luck & happy computing!

Hi i am using OS 10.8.5 i hv a problem moving items to trash when i delete any thing it deletes from specific folder but dosnt appear in trash n my hard drive space is not getting free kindly help me

hi i am using OS 10.8.5 i have a problem moving items to trash when i move a specific thing to trash it deletes from that folder but does not appear in trash and my hard drive space is not getting free i am a new user to mac kindly help me out

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How is the album and folder connected and when I delete photos from the album it also deletes from the folder?

How is the album and folder connected and when I delete photos from the album it also deletes from the folder?

In what application? iPhoto? If so: what version?

Error while creating jar from source folder

Hi,
i have source folder and i added log4j.properties
i try to build for creating jar (sourcecode.jar) by ant build (build.xml)
it is throwing error and saying that "package org.apache.log4j does not exist"
i spend more time to resolve this error , but i could not find any solution.
what is the error on this.. below the build.xml code which i try to build jar
<project name="MyProject" default="dist" basedir=".">
    <description>
        simple example build file
    </description>

<property name="src" location="src"/>
<property name="build" location="build"/>
<property name="dist" location="dist"/>
<target name="init">
    
    <tstamp/>
    
    <mkdir dir="${build}"/>
</target>
     <path id="classpath">
             <fileset dir="${src.dir}">
             <include name="log4j-1.2.16.jar"/>
             </fileset>
     </path>
     <target name="compile" depends="init"
        description="compile the source " >
    
    <javac srcdir="${src}" destdir="${build}"/>
</target>
<target name="dist" depends="compile"
        description="generate the distribution" >
    
    <mkdir dir="${dist}/lib"/>
    
    <jar jarfile="${dist}/lib/EscapeIncontra.jar" basedir="${build}"/>
</target>
<target name="clean"
        description="clean up" >
    
    <delete dir="${build}"/>
    <delete dir="${dist}"/>
</target>
</project>i am using log4j.properties inside source folder also added in eclipse class path..
Thanks
Rosina

user13836688 wrote:
     <path id="classpath">
             <fileset dir="${src.dir}">
             <include name="log4j-1.2.16.jar"/>
             </fileset>
     </path>
maybe you ment<path id="classpath">
             <fileset dir="${src.dir}">
             </fileset>
             <pathelenemt path="${your_lib_folder_path}/log4j-1.2.16.jar"/>
     </path>bye
TPD

How can I do a clean uninstall of packages built from source?

I want to remove older versions of Ruby (but not the one packaged with Snow Leopard) from my development machine. I have a couple versions that were built from source that are unused now. How can I do a clean uninstall of those types of packages? I don't think there is any "make" command that will uninstall, so other than just deleting the folders that I think contains the older versions, I'm not sure how else to do it. Any ideas?

mickey13, if its Makefile doesn’t have a target for uninstalling, then the next best thing would be to run *make -n install 2>&1 > /tmp/install* to get a list of what it does at installation time, and then edit the /tmp/install file to remove the files that it copied over on installation (or to undo the edits that it made to previously existing files).

How to update other infotype from source infotype via function module?

Want in source infotype to call a func.module, which shall update other infotype(s) in background.
Have tried out with HR_INFOTYPE_OPERATION, but without success - gives mitchmatch of source it and target it in the internal it buffer tables.
How to do?
Requirements also are to secure rollback, if update of the last of ex. 3 target its fails.
Anyone has experience on this issue?
Regards Søren

Know this functionality - also by means of own coding in the PAI by filling the int. tables dynmeas + initial_values. However the issue remains, i.e. the update has to be done by a function module called from PAI of own infotype, and from a function module you can't trigger the T588Z-functionality.
The update of it0003 from own it9300 is only an example, have general requirements that:
- from own infotype PAI a function module shall be called
- from the function module update of other infotypes
shall take place (modify as well as insert and delete)
- if more infotypes shall be updated from source infotype,
rollback shall take place if ex. update of last target
infotype fails (all to be updated or none!).
Regards Søren

TS4153 few files and folder are not deleting from trash folder

i am trying to delete all files and folders from the trash folder by clicking empty securely, but its not deleteing the files anf folder. please suggest how to clean the trash folder by deleteing all the deleted files and folder.

Securely deleting items in Trash writes Zeros over the data so that it is completely eradicated.
This will take quit a long time depending on how much data you have in Trash.
Unless there is data that needs to be rendered unrecoverable in the Trash, you could choose to just delete the files and folders with out the secure option.
Once you have Emptied the Trash unsecurely you can always use disk utility to Securely Erase Free Space on the Drive.

DMS: Documents opened in edit mode(CV02N) are not deleted from Temp Folder

Hi All,
My query is whenever i edit documents like word,pdf or autocad files in cv02n, it make a copy in my c/windows/temp folder but doesnot delete them when it close the transaction. i have given PC data carrier with path as %Temp% & in profiles i have defined the path as c/windows/temp/
So is there any solution by which the files opened in the edit mode will be deleted when i close the transaction or else after some specified time it should get deleted from the temp folder. Is there any standard configration for it.
Note: I have tried the 741388 note but it is only for display mode documents.
Regards
Nishant.

Hi Nishant,
unfortunately this is the standard behavior as for editing the application need a
temporary file and this file is still stored after closing the application to enable a re-checkin in the future too.
So the only possibility is to delete the temporary files from C:\Windows\Temp after some time manually. There is no functionality in the system standard as the SAP system has no control on the windows folders.
To achieve a very similar behavior you can set the "Delete after checkin" flag in transaction DC30 for this applications and see if this will meet your requirements.
This flag means that the original file gets deleted after you check them into a storage category. Maybe this could be usefull.
Best regards,
Christoph

Insert data from source table to destination table dependning up on a criteria.once inserted delete from source table.

HI,
I have a source table with millions of records .I need to insert some of the data (depending on a condition) to a repository table.
Once they are inserted they can be deleted from the source table.
The deletion is taking a lot of time .
I need to reduce the time to delete the records.
ex:- 1 million records in 8 seconds.
Had already used bulk collect and cursors but cannot succeed.
Please suggest how to increase the performance.
Thanks & Regards

APPROACH 1:-
CREATE OR REPLACE PROCEDURE SP_BC
AS
DETAILS_REC SOURCETBL%ROWTYPE;
COUNTER NUMBER:=1;
RCOUNT NUMBER:= 1;
START_TIME PLS_INTEGER;
END_TIME PLS_INTEGER;
CURSOR C1 IS
SELECT * FROM SOURCETBL WHERE DOJ<SYDATE;
BEGIN
START_TIME := DBMS_UTILITY.GET_TIME;
    DBMS_OUTPUT.PUT_LINE(START_TIME/100);
    OPEN C1;
    LOOP
    FETCH C1 INTO DETAILS_ROW;
    EXIT WHEN C1%NOTFOUND;
           BEGIN
            EXIT WHEN COUNTER >10000;
            INSERT INTO DESTINATIONTBL VALUES DETAILS_REC;
            IF SQL%FOUND THEN
                DELETE FROM SOURCETABLE WHERE ID= DETAILS_REC.ID;
              COUNTER:=COUNTER+1;
        END IF;
    COMMIT;
        END;
     COUNTER:=1;
    END LOOP;
    COMMIT;
END;
APPROACH 2:-
    CREATE OR REPLACE PROCEDURE SP_BC1
IS
TYPE T_DET IS TABLE OF SOURCETBL%ROWTYPE;
T_REC T_DET;
BEGIN
    SELECT * BULK COLLECT INTO T_REC FROM SOURCETBL
     WHERE NAME=@NAME;
    FOR I IN T_REC .FIRST ..T_REC .LAST
       LOOP
         INSERT INTO DESTINATIONTBL VALUES T_REC (I);
      IF SQL%FOUND THEN
      DELETE FROM SOURCETBL WHERE ID =
       WHERE ID = T_REC (I).ID;
       END IF;
       EXIT WHEN T_REC=0;
    END LOOP;
    COMMIT;
END;
APPROACH 3:-
CREATE OR REPLACE PROCEDURE SP_BC2
AS
TYPE REC_TYPE IS TABLE OF SOURCETBL%ROWTYPE ;
DETAILS_ROW REC_TYPE;
CURSOR C1 IS
SELECT * FROM
     SOURCETBL WHERE END<SYSDATE;
    BEGIN
    OPEN C1;
    LOOP
    FETCH C1 BULK COLLECT INTO DETAILS_ROW LIMIT 999;
    FORALL I IN 1..DETAILS_ROW.COUNT
              /* A BATCH OF 999 RECORDS WILL BE CONSIDERED FOR DATA MOVEMENT*/
INSERT INTO DESTINATIONTBL VALUES DETAILS_ROW(I);
--            IF SQL%FOUND THEN
--                DELETE from SOURCETBL WHERE ID IN DETAILS_ROW(I).ID;
--           END IF;
        EXIT WHEN C1%NOTFOUND;
    COMMIT;
    END LOOP;
    COMMIT;
3rd approach seems better but i have an issue with referring the fileds of a record type.

How to reinstall window 8.1 when app data deleted from user folder

due to fault i deleted my app data from user folder of c drive due to this some apps and software not working prioperly so i want to reinstall my windos but it is not done so help me to solve this problem of deleting app data

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you deleted the App data from your profile and now apps are not working properly. I am happy to assist with this. Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
Also, was Windows 8.1 your factory installed operating system? I would recommedn that you backup any personal data, files, etc from the system before doing anything else. Then you can do a system recovery to restore the factory installation.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)

IPhoto 08 not updating videos deleted from iMovie 08

Been an iPhoto user for years. During that time I've accumulated hundreds of short video clips taken in the movie mode of my various still cameras. Good stuff but it's always been hard to look at them, until now. iMovie 08 makes it very simple but I've stumbled across a bug which is really troubling me.
Basically I'm using iMovie 08 to view all these short clips. Many of them are garbage so I've been deleting them. The problem is that iPhoto 08 does not know they have been removed. In the iPhoto library, the clips still show up however double clicking on them simply launches QuickTime Player and does nothing, no error, no dialog, no movie. It's as if iMovie isn't telling iPhoto that the movie has been deleted. In any case I've tried many of the rebuild options in iPhoto by launching while holding down Command+Option, none help.
Does anyone know a work around or is this the kind of thing which will hopefully be fixed in a future update?
DM

I open up iMovie and it then imports movies from iPhoto. The problem is it is missing several videos. When I select import video it imports those missing files, so I know it's not a file format issue... Anyone else seen this? Any suggestions on how to get ALL my videos into iMovie?
iPhoto will import any file that can be played in the QT Player (i.e., that is "playback" compatible). On the other hand, iMovie '08 will only import files that it can edit -- i.e. that are "edit" compatible. (Would you really want to waste your time importing files only to find that you can't do anything with them once they are "in" the application?) Your solution is to convert non-edit compatible files to compression formats that are editable -- primarily DV, AIC, M-JPEG, Photo-JPEG, MPEG-4, or H.264. You should also note that both audio and video content must be edit compatible. For instance, many AVI files contain M-JPEG video which can be edited along with ADPCM audio which cannot be edited and so such files will not import.

Possible to delete from source on import?

Hi.
Is it possible to delete my photos from the source device as part of the post-import process? It seems pointless to have another step to go through, especially since iPhoto has this functionality built in. Am I missing something?
Thanks.

Lots of discussion here (found by searching the forum for "delete source"):
http://www.adobeforums.com/webx/.3c0529bf/41

Update package deleted from source folder

Similar Messages

Maybe you are looking for