Update Portal with new Web Cache location

Hi!
We are trying to move our front-end WebCache to a new server. The Web Cache seems to work allright, but I can't get Portal to access the Web Cache.
After moving the Web Cache I've updated the Portal Web Cache Settings in IAS console's portal:portal instance. OC4J_Portal and portal:portal are running and are not showing any errors in IAS console. When I try to access Web Cache through Portal administrative page i get an error saying WWC-40019 "Could not open web cache connection". The URL Portal uses to access Web Cache admin page i.e. is wrong.
I need some help finding the appropriate way to configure Portal with the new Web cache addresses.
Thank you!
Best regards
"Heyers"

Portal PM, I thought you said that this solution would not work. Everyone I have heard so far has said that you cannot configure webcache to work with Portal documents. Does this work or does it not?
Read the messages below from the bottom up.
It's not possible to do that today.
In 9.0.2 (the next release) we will be using WebCache configured out of the box so you won;t need to, however, till then you cannot use webcache with Portal 3.0.x
Thanks
Portal PM
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Agus Jaelani Type : Question
Date : Feb 4, 2002 23:11 PT
please try using this configuration on http.conf
Port <webcache port>
Listen <apache listen port>
ServerName <webcache hostname>
you must running ssodatan script again.
Note :
this config only make portal work together with webcache.
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Krzysztof Jungowski Type : Question
Date : Feb 5, 2002 06:58 PT
Thanks a lot. It works.
best regards
Krzysztof Jungowski

Similar Messages

Oracle Portal with Oracle Web Cache

How can I configure Oracle Portal (or Web Cache) to work together?
I have installed and started both of them. Now, Web Cache works fine with standard html pages (for example Apache docs) but after trying to reach portal the url is redirected to standard port - on which Portal runs (Web Cache works on 1100 and Portal on 7778).
So it seems that portal pages are not cached.
Web Cache:
Application Web Servers:
hpwin 7778 100 30 5 / 10
Where can I find any information about that?
best regards
KJ

Portal PM, I thought you said that this solution would not work. Everyone I have heard so far has said that you cannot configure webcache to work with Portal documents. Does this work or does it not?
Read the messages below from the bottom up.
It's not possible to do that today.
In 9.0.2 (the next release) we will be using WebCache configured out of the box so you won;t need to, however, till then you cannot use webcache with Portal 3.0.x
Thanks
Portal PM
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Agus Jaelani Type : Question
Date : Feb 4, 2002 23:11 PT
please try using this configuration on http.conf
Port <webcache port>
Listen <apache listen port>
ServerName <webcache hostname>
you must running ssodatan script again.
Note :
this config only make portal work together with webcache.
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Krzysztof Jungowski Type : Question
Date : Feb 5, 2002 06:58 PT
Thanks a lot. It works.
best regards
Krzysztof Jungowski

ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2

[oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
DWH12.__large_pool_size=16777216
DWH11.__large_pool_size=16777216
DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DWH12.__pga_aggregate_target=2902458368
DWH11.__pga_aggregate_target=2902458368
DWH12.__sga_target=4328521728
DWH11.__sga_target=4328521728
DWH12.__shared_io_pool_size=0
DWH11.__shared_io_pool_size=0
DWH12.__shared_pool_size=956301312
DWH11.__shared_pool_size=956301312
DWH12.__streams_pool_size=0
DWH11.__streams_pool_size=134217728
#*._realfree_heap_pagesize_hint=262144
#*._use_realfree_heap=TRUE
*.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='DWH'
*.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
*.db_recovery_file_dest_size=7373586432
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
DWH12.instance_number=2
DWH11.instance_number=1
DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
*.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
*.log_archive_format='DWH_%t_%s_%r.arc'
#*.memory_max_target=7226785792
*.memory_target=7226785792
*.open_cursors=1000
*.processes=500
*.remote_listener='LISTENERS_SCAN'
*.remote_login_passwordfile='exclusive'
*.sessions=555
DWH12.thread=2
DWH11.thread=1
DWH12.undo_tablespace='UNDOTBS2'
DWH11.undo_tablespace='UNDOTBS1'
SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
[oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
#kernel.shmall = 4294967296
kernel.shmall = 8250344
# Oracle kernel parameters
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
Please can I know how to resolve this error.

CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

ADF application integrating with Oracle Web Cache

Hello,
I am trying to integrated my ADF 11g application with Oracle Web Cache. I used this link http://andrejusb.blogspot.com/2010/06/oracle-webtier-11g-configuration-for.html for it.
I am able to access my ADF application using webcache port 7785.
I created few caching rules in the Oracle Web Cache. And in the popular request section of the Oracle Web cache i see jpg,png and other image files cached.
But the issue is when the application access images like /testapp/test/images/abc.jpg?_adf.ctrl-state=5b0s7lzfo_29 . I created a caching rule with regular expression ^/testapp/test/images/[A-Za-z0-9_]*\.(gif|jpeg|png|jpg)\?_adf\.ctrl-state=[A-Za-z0-9_]*$.
But when i access the popular request in em i don't see the URL given above as cached. The caching reason it specifies as URL contains query string.
I am not sure if i need to do anything additional to cache these URL's as well.
Thanks!
Ram

Yes that works. But my question is how to cache the urls which has querystring. I was trying to give a regular expression to match the url so that the url which contains parameters like _afrLoop which changes with each HTTP request can also be cached.

Updated ipad2 with new os half through the restore it tells me to enter a backup file password.. I never set one??

updated ipad2 with new os half through the restore it tells me to enter a backup file password.. I never set one??

Have you encrypted the backups files from your iPad? If so, that is likely the password needed.

HT1349 Trying to update laptop with new version of I tunes, but it is telling me that I am on a network that is not available. I cant even uninstall I tunes to re-install either? Help

Trying to update laptop with new version of I tunes, but it is telling me that I am on a network that is not available. I cant even uninstall I tunes to re-install either? Help

Hey JAK Entertainment,
Thanks for the question. I understand that you are experiencing issues with installing/uninstalling iTunes. The following resource may provide a solution:
"The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows
http://support.apple.com/kb/TS3704
Additional Information:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks,
Matt M.

How can I update Jdev with new JDK

I currently have JDev323 and I wonder how can I update it with new JDK 1.4.

What you should do is update the JDeveloper version that you use - 3.2 is sooooo old.
Get Oracle JDeveloper 9.0.4 and you'll have JDK 1.4 built in.
I don't remember if that feature was in 3.2 but since JDeveloper 9 you can switch the JDK - it is in the online help - do a search for the word JDK.

Updating graph with new data

I have a problem updating my graphs with new data in Illustrator. When I update them with new data each month the y and x-axis tend to change font and size.
What can be the problem? Please help me!

Hi Rajasekar
You can purchase the enterprise toolkit fron NI, it includes a "database connectivity toolkit".
As regards the design pattern to do you you describe, it will depends on the refresh rate you need and the rate at which you want to write your data to the database.
I would have 2 loops :
- one acquiring the data and putting it in a queue,
- and a second that get the data from the queue, logging data to database and refreshing the graph.
If the write time to database is too long and slows down the graph refresh you place it in another loop.
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

My Iphone updated today with new IOS 6.1 and while doing that it has sync my phone number with my wife number in the same cloud that we have hence we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings

My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank you

My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank you

Update registration with new tags

Hello!
I am trying to update registration of my application with new tags.
I want to remove old tag "DELang" and add a new tag "ENLang".
I am using this official article Registration Management
I have add
using NuGet package WindowsAzure.Messaging.Managed
to my application and have create hub variable.
var hub = NotificationHubClient.CreateClientFromConnectionString("{connectionString}", "hubName");
But this variable doesn't support GetRegistrationAsync or UpdateRegistrationAsync.
What is wrong?

Did you activate iPad like this:
1. Slide to turn on
2. Select Wi-Fi Network
3. Enter Wi-Fi password
5. (a) Enable Location Service (b) Don't enable Location Service
6. Select
7. Enter Apple ID and Password
8. Terms and Conditions
9. Accept
10. (a) Use iCloud (b) Don't use iCloud
11. Select
12. (a) Create a Passcode (b) Don't Add Passcode
13. Select
14. Continue
15. Diagnostics
16. (a) Automatically Send (b) Don't Send
17. Select
18. Welcome to iPad
19. Get Started
20. Home Screen

Issue with New Web Form Created for Web Page Composer

Hello,
I created new Web Form as per the example given on sdn: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7
Everything looks fine with all the setup but when I restarted the Portal, I am not seeing this new webform where we see Article, List, Banner and other webform to create new document in Web Page Composer section.
Any idea what could be the reason behind this would be really helpful?
regards,
Jaish

Hi Jaish,
Can you please confirm if you have followed all the steps in here.
The following configuration steps are necessary:
1.Create a KM Resource Type
2.Create a Web Resource Type and assign the KM Resource Type to it
3.Extending the Configuration of Existing Web Resource Types and Containers
4.Referencing the XSL File in the Stylesheet Object
5.Creating a Stylesheet Group
6.Referencing the XML File in the Document Type
7.Restart the portal
Make sure that you store the files in the following KM folders:
The XML file in the /etc/wpceditor/types directory, the XSL files in the /etc/wpceditor/styles directory.
Please refer to this link.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/599b78b0aa3bdde10000000a1553f7/frameset.htm
Hope this helps.
Cheers,
Sandeep Tudumu

Problems with invalidating web cache

Currently we display the current date (portal smart link) in the top region of each portal page. We have been having problems with the date not refreshing, rather old pages continue to be served up. I set up a database job using wvuxtil to send an XML document to invalidate all documents in the web cache under root at midnight. (The caching of every portal page is set to "content and definiton at system level" for 1440 min). This morning, the job ran but when checking the pages from a client machine, the date still displayed as yesterday's for SOME of the pages (not all)- clearing the clients IE cache made no difference. Logging on to the server, I accessed the relevant pages displaying yesterday's date on the client - and they showed the correct date on the server. Going back to the client machine, the dates are now correct ? Help anyone ? What should I be checking/looking at next ?
Cheers
Brent Harlow

Hi Brent,
Which version of Web Cache and Portal are you using? A similar problem with dates and invalidation has been reported before, so you may want to check with Oracle Support for the appropriate patch.

Itunes won't update nano with new software version

Since the new software update has become available (which I'm hoping might fix my multiples in cover flow issue) I've tried on multiple occasions over a few days to download and install the update on my new nano 4th Gen.
It goes through the licence agreement bit and says it's downloading and will instal when it's done. However after a few minutes it gives an error message that the connection with the itunes server has timed out. It says check your connections and such but all is fine, even itunes own diagnostic connection test is all fine.
I've even tried the restore option but that just dies on it's attempt to get new software too and doesn't get anywhere.
I'm pretty good with computers but this one's now got me stumped.
Anyone got any ideas?

Are you using a dial-up or broadband internet connection? If your using a dial-up connection, that might be your problem. If your using a broadband connectin and your getting this problem, you might just want to contact technical support.

How to update views with new changes

Hi Experts
I had 3 views created on a Query,Which(views) are being used in Dashboard reports.
Now as per my requirment i need to update my Query with few new chars and some user enty variables.
How can i update my views....with new changes
Thanks

Hi developerbw,
Here are steps you can do to make the change
1. open your old view
2. make the change
3. save the view uing the same description and technical name, (Make sure you you say yes when it ask whether to overwrite the exisitng view)
no need to create new views
feng

Update Portal with new Web Cache location

Similar Messages

Maybe you are looking for