Problems with invalidating web cache

Currently we display the current date (portal smart link) in the top region of each portal page. We have been having problems with the date not refreshing, rather old pages continue to be served up. I set up a database job using wvuxtil to send an XML document to invalidate all documents in the web cache under root at midnight. (The caching of every portal page is set to "content and definiton at system level" for 1440 min). This morning, the job ran but when checking the pages from a client machine, the date still displayed as yesterday's for SOME of the pages (not all)- clearing the clients IE cache made no difference. Logging on to the server, I accessed the relevant pages displaying yesterday's date on the client - and they showed the correct date on the server. Going back to the client machine, the dates are now correct ? Help anyone ? What should I be checking/looking at next ?
Cheers
Brent Harlow

Hi Brent,
Which version of Web Cache and Portal are you using? A similar problem with dates and invalidation has been reported before, so you may want to check with Oracle Support for the appropriate patch.

Similar Messages

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

ADF application integrating with Oracle Web Cache

Hello,
I am trying to integrated my ADF 11g application with Oracle Web Cache. I used this link http://andrejusb.blogspot.com/2010/06/oracle-webtier-11g-configuration-for.html for it.
I am able to access my ADF application using webcache port 7785.
I created few caching rules in the Oracle Web Cache. And in the popular request section of the Oracle Web cache i see jpg,png and other image files cached.
But the issue is when the application access images like /testapp/test/images/abc.jpg?_adf.ctrl-state=5b0s7lzfo_29 . I created a caching rule with regular expression ^/testapp/test/images/[A-Za-z0-9_]*\.(gif|jpeg|png|jpg)\?_adf\.ctrl-state=[A-Za-z0-9_]*$.
But when i access the popular request in em i don't see the URL given above as cached. The caching reason it specifies as URL contains query string.
I am not sure if i need to do anything additional to cache these URL's as well.
Thanks!
Ram

Yes that works. But my question is how to cache the urls which has querystring. I was trying to give a regular expression to match the url so that the url which contains parameters like _afrLoop which changes with each HTTP request can also be cached.

Problem with RESTful web service

I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
Accept: */*;
rather than
Accept: application/xml
when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
    // Constructor
    public function _Super_UsersService()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getUsers");
         operation.url = "http://localhost:8888/users";
         operation.contentType = "";
         operation.method = "GET";
         operation.resultFormat = "xml";
         //operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/";
         operation.resultType = valueObjects.Users;
         operations.push(operation);
         _serviceControl.operationList = operations;
         model_internal::initialize();
How does one configure the accept header?

Hi,
I have posted a simple application with the RESTful reference:
http://apex.oracle.com/pls/apex/f?p=13758
I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
class="statusMessage">Bad Request</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>
</ul>Thanks,
Pat
Edited by: patfmnd on May 8, 2013 3:33 AM

Update Portal with new Web Cache location

Hi!
We are trying to move our front-end WebCache to a new server. The Web Cache seems to work allright, but I can't get Portal to access the Web Cache.
After moving the Web Cache I've updated the Portal Web Cache Settings in IAS console's portal:portal instance. OC4J_Portal and portal:portal are running and are not showing any errors in IAS console. When I try to access Web Cache through Portal administrative page i get an error saying WWC-40019 "Could not open web cache connection". The URL Portal uses to access Web Cache admin page i.e. is wrong.
I need some help finding the appropriate way to configure Portal with the new Web cache addresses.
Thank you!
Best regards
"Heyers"

Portal PM, I thought you said that this solution would not work. Everyone I have heard so far has said that you cannot configure webcache to work with Portal documents. Does this work or does it not?
Read the messages below from the bottom up.
It's not possible to do that today.
In 9.0.2 (the next release) we will be using WebCache configured out of the box so you won;t need to, however, till then you cannot use webcache with Portal 3.0.x
Thanks
Portal PM
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Agus Jaelani Type : Question
Date : Feb 4, 2002 23:11 PT
please try using this configuration on http.conf
Port <webcache port>
Listen <apache listen port>
ServerName <webcache hostname>
you must running ssodatan script again.
Note :
this config only make portal work together with webcache.
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Krzysztof Jungowski Type : Question
Date : Feb 5, 2002 06:58 PT
Thanks a lot. It works.
best regards
Krzysztof Jungowski

Problems with Java web start

Hi All,
I am facing a problem with Java Web Start. Which is the most appropriate version of JDK recommended for SAP XI? I tried
JDK 1.4.2_04
JDK 1.4.2_09
JDK1.4.2_11
JDK1.5.0_01
When I click on Integration repository or Directory for the first time, it loads the jar files and while loading, I get an error msg "Unable to launch Integration Builder". After a lot of retries I get sucess. But still we are facing this issue in some machines. Can you pls let me know if there is any pre configuration or some thing I am missing...
Regards,
Jai Shankar

Did you check the proxy settings in JAVA Web start. Please follow the below instructions.
This could be set to None or to specific for values HTTP Proxy and HTTP Port .
Contact your network administrator for the correct settings.
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Java Webstart

Oracle Portal with Oracle Web Cache

How can I configure Oracle Portal (or Web Cache) to work together?
I have installed and started both of them. Now, Web Cache works fine with standard html pages (for example Apache docs) but after trying to reach portal the url is redirected to standard port - on which Portal runs (Web Cache works on 1100 and Portal on 7778).
So it seems that portal pages are not cached.
Web Cache:
Application Web Servers:
hpwin 7778 100 30 5 / 10
Where can I find any information about that?
best regards
KJ

Portal PM, I thought you said that this solution would not work. Everyone I have heard so far has said that you cannot configure webcache to work with Portal documents. Does this work or does it not?
Read the messages below from the bottom up.
It's not possible to do that today.
In 9.0.2 (the next release) we will be using WebCache configured out of the box so you won;t need to, however, till then you cannot use webcache with Portal 3.0.x
Thanks
Portal PM
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Agus Jaelani Type : Question
Date : Feb 4, 2002 23:11 PT
please try using this configuration on http.conf
Port <webcache port>
Listen <apache listen port>
ServerName <webcache hostname>
you must running ssodatan script again.
Note :
this config only make portal work together with webcache.
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Krzysztof Jungowski Type : Question
Date : Feb 5, 2002 06:58 PT
Thanks a lot. It works.
best regards
Krzysztof Jungowski

Firefox is having problems with certain web sites, but IE is ok

Top of page is present in IE but not in latest Firefox.

Is it a safe assumption that website is your's? <br />
What difference does it make which browser '''''you''''' use? Isn't your website for client's or potential clients?
That said, I don't have a problem with that web page on Firefox 2.0.0.20, 3.0.19, 3.5.16, 3.6.13, or the 4.0b9 nightly - it looks the same as in IE8 on 32-bit WinXP SP3, with an AMD 64-bit processor.
The problem shown in your screenshot is with your own Firefox installation. It's like all the "styling" is turned off.
''''' "I infer Firefox needs a 64 bit version." ''''' <br />
What good is a 64-bit browser without 64-bit plugins? <br />
Adobe still hasn't released a 64-bit version of Flash, although they do have a "preview" version available. <br />
http://kb2.adobe.com/cps/000/6b3af6c9.html
''BTW, Mozilla does have a Windows 64-bit version of the Firefox 4.0 betas that is being tested now, but it is not going to be released in Jan / Feb when Firefox 4.0 is released. It will probably be released later in 2011 with one of the 4.# versions, I suspect right after Adobe has a 64-bit Flash release version.''

Problem with iPlanet Web Server 6

We are getting an intermittent problem with our web server, the users start to get problems connecting to the web site.
I have found the following message in the error log -
failure ( 2390): Error accepting connection -5928, oserr=130 (Connect aborted)
can anybody help???

Check out the below.
Problem 4680491. CSS causes oserr=130 in iWS 6.0 logs.
Workaround
If you are using the Cisco Content Services Switch (CSS) with Sun ONE Web Server and have set the value of the sticky bit setting in CSS to on, the following error is logged periodically in the error logs:
failure ( 2210): Error accepting connection -5928, oserr=130 (Connect aborted)
This is caused not by a defect in Sun ONE Web Server but by the setting of the sticky bit in CSS. To avoid the error logging, set the value of the sticky bit in CSS to off.
Which as been fixed in iWS 6.0 SP5.
For more info check the below link.
http://docs.sun.com/source/816-6434-10/rn60sp5.html
Dakshin.

Caching problem with iFS web server / index.html

There seems to be a problem with the iFS Java web server serving cached index.html documents after they have been modified.
This only happens when the document is referenced by the folder name (e.g. /home/kennu/). If you reference it by the full name (/home/kennu/index.html), the new modified version comes up alright.
I wonder if this is a bug or some kind of a feature? Is there an quick and easy workaround?
Byt the way, is this the correct place to post bug reports? I didn't see iFS mentioned in the OTN Bug Database.
null

well, this is certainly not an intended effect. i'll look into it. in the meantime, the workaround already posted should pull you through.
sorry about the inconvenience.
-ilya
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kenneth Falck ([email protected]):
There seems to be a problem with the iFS Java web server serving cached index.html documents after they have been modified.
This only happens when the document is referenced by the folder name (e.g. /home/kennu/). If you reference it by the full name (/home/kennu/index.html), the new modified version comes up alright.
I wonder if this is a bug or some kind of a feature? Is there an quick and easy workaround?
Byt the way, is this the correct place to post bug reports? I didn't see iFS mentioned in the OTN Bug Database.<HR></BLOCKQUOTE>
null

Problem with enabling Web Services on LaserJet Pro MFP M127fw

12:25 AM
I have a problem with enabling the HP Web Services. When I push the application button on the printer, the monitor shows "connecting..." and then nothing is happen or an error apear thet my device could not connect to servers. I can't print information sheet on web services panel to get the claim code and add my device in www.hpconnected.com . My device is connected to the internet with no problem by a wireless Dlink Router. I also changed my device IP from 192.168.1.11 to 192.168.1.55 manually, and I change Preferred DNS Address to 8.8.8.8 and Alternate DNS Address to 8.8.4.4 and nothings happen. I can see the menu but I can not enable the HP Web Services in there. no proxy. no firewall. I do not know what can I do for solveing this problem. Please help me.

Hi @AlirezaP
Welcome to the HP Support Forums. I gather that you are getting a connection error message when trying to enable the web services for your Laserjet Pro M172fw printer.
As you have already tried setting the manual IP address and manual DNS servers, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing problem with my web pages

Hi all-
I noticed a funny problem with one of my web pages. When I go to print, it only prints one page length of a webpage that should be two pages long (assuming you choose the shrink width to fit one page wide option in your print command).
I post messages with training schedules and people sometimes want to print the page, I'm not looking for pdf or anything, just a simple print the whole web page. When I print, the second half of the webpage comes out blank. I tried saving at a pdf from the print window, and the same thing happens.
The page I'm trying to print out is at:
http://web.mac.com/gdefrancis/FSNordic/FSTeam_News/Entries/2008/12/22_JNT_Holiday_Training_and_PracticeSchedule.html
Note that is stops printing (or leaves a pdf converted from the webpage blank) after the 12.21 entry.
any suggestions?
thanks!
Greg

Greg ~ On a now archived thread, you wrote:
I would love people to look at my various sites and let me know what you think!
Looking at your Nordic Ski site, it occurred to me that it could benefit from some Social Networking features. Take a look at this site:
http://my.steamboat.com
...built with this free, web-based tool:
http://www.ning.com
Each Network's "look" is fully customizable — click on the thumbnail for their product overview:

Problem with optional attribute caching on a custom tag

Hello,
I've created a tag by extending TagSupport. I have one attribute that is optional. I'm having a problem with this attribute since the tag is cached. If the value is not specified in the tag, it is always using the previous value from the past request.
I understand why this is happening, but I wonder if there is anyway to reset this value besides doing it at the end of the doStartTag or in the doEndTag methods? I simply want it to be an empty string if it is not in the request.
Thanks,
Tim

Thats abit overkill in my opinion.Probably yes, but its a cleaner option. In case your doEndTag handles custom exceptions, you would anyhow need to put this code in a finally block, right ?
public int doEndTag() throws JspException {
try {
call some methods that throws other checked exceptions;
}catch(Exception1 e){
throw JspException(e);
}catch(Exception2 e){
//log and ignore
}finally{
//clean up here
return an int;
Having said that, different containers implement the spec a bit differently. For example, in our project, we use weblogic and for wl, we put our clean up code in the release() method which according to the spec, needs to be called only before gc. Weblogic implementation is a bit different - its called after doEnd() for every use of the tag.
This is from jsp spec regarding tag life cycle especially with reuse
Some setters may be called again before a tag handler is reused. For
instance, setParent() is called if it�s reused within the same page but at a dif-ferent
level, setPageContext() is called if it�s used in another page, and
attribute setters are called if the values differ or are expressed as request-time
attribute values.
�Check the TryCatchFinally interface for additional details related to exception handling and resource management.
cheers,
ram.
}

RSRT1 problem with JAVA WEB

Hello Gurus,
I have serious problem with my Java stack (or BI configuration). I have sample report which I have tested with transaction rsrt1. When I choose [Abap WEB] button - web page opens showing table filled with data. When I choose [Java WEB] button - web page opens with message "no applicable data found". What's wrong?
I'm wainting for your hints, because I have no idea what and where I did wrong.
Regs,
FS

Hello,
you have to redo your report. Try to design very simple one, without any filters, many fields etc. It worked for me ... then I extended it step by step and it works.
Regs,
FS

Problems with invalidating web cache

Similar Messages

Maybe you are looking for