Update programme was not generated
Hi,
We have a situation where we are planning the Activity in CRM System and this data will be written to the transactional Cubes in SEM.
The Problem is in the Activity if we change the plan end date while saving the Activity the Cube update programme was not generated in the Transactional Cube as result we have in the CRM online value for a particular period and in the Transactional Cube we have the same value for different Cubes ultimately in the report different periodicity.
We cannot save the Activity agian as the Activity already in the Executed status and conditions flown to R/3 and also Actuals spent for the same amount.
Can anyone suggest how to make the data consistent in CRM online and in the TCubes
Thanks for the posts. We do plan to recapture the updates rules and will try to transport again (prod is not changeable). Was just curious if anyone else had seen this problem. It is just very odd that you can actually see the code via "Display Start Routine" in the update rules view, but the generated program does not contain the changes. Actually, I am not surprised since the generated program version is older than the last change to the active rules and the generate program step is not executed in transport application. Just don't understand why this happened. Thanks for the comments so far.
Similar Messages
-
Afer background job finished, spool was not generated
hi all
Afer background job finished, spool was not generated but all background jobs is not
soem background jobs was created spool.
even if same user and same backgorund job, sometime generated spool or not.
how can I solve??
thanksHi,
Spool will be generated only spool specification wil be defined for that job.
Select the job go to steps spool specification you can see the device assigned to it.
Regards
Ashok -
I had about 6000 pictures on my phone, then said "updating library" was not plugged into the computer, was at dinner trying to pull a picture up. After finished updating i only had 597 photos that were totally random, not in order...help?!
hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
After I installed the latest update, MSVCR80 was not installed and itunes will not work
After I installed the latest updat to itunes, it did not install properly. I received the following messages:
Service "Apple Mobile Devise (Apple Mobile Devise) failed to start. verify that you have sufficent privileges to start system services Abort, Retry, Ignore
Itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 126)
When I click on the itunes icon, I get the following message:
The computer can not start because MSVCR80.dll is missing from your compyter. Try reinstalling the program to fix this problem.I've revised my advice slightly...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above then search the computer for copies of the file QTMovieWin.dll - you should only have one copy in the relevant folder for your system.
C:\Program Files\Common Files\Apple\Apple Application Support (32-bit Windows)
C:\Program Files (x86)\Common Files\Apple\Apple Application Support (62-bit Windows)
Delete any others and not only should this fix the problem, but prevent it from recuring on subsequent updates.
tt2 -
Accounting Document was not generated
Hi Friends,
While doing Post goods issue, Material document was created but system does not create accounting document.
One sales order having two items (10&20)
Both iteams having same material
In case of items number 10(system generate accounting document)
In case of Item number 20(System does not generate accounting document)
What could be the reason..
Please help me....
Thanks
NPRHi,
Open the billing document number generated using t.code VF02 or VF03. Then from the menu bar choose Environment and choose Account determination analysis revenue account. From there you will see where the correction will be made.
But possible reasons for the error are account 1. account assignment group is not tagged in sales area data in the customer master 2. account assignment group is not tagged in the material master.
Try also releasing the document by clicking on release to accounting icon (green flag)
Thanks.
Rachelle -
Vmware tools intallation -- linux 4 update 5 was not happening
Hi ,
I want to install Vmware tools for my machine. I installed VMware and Linux 4 update 5 but was unable to install vmware tools once i installed linux. I couldnt find vmware tools rpm. I just find vmwaretools-8.1.4-227600.tar.gz file. I was not able to move my cursor freely. everytime i need to use keystrokes like alt+control to come out. Can anyone help me how to install vmware tools.Please, avoid duplicated thread :
Linux 4 Update 5 vmware tools
Nicolas. -
Hi to all
In development server we are able to print the things with same setting in quality and production no print comes error
print was not generatedHi,
This is a little bit to few information. Is there long text for it? Does it happens for all devices or only for one? Were you able to prepare spool and output request and problem arise during printing or does it happen earlier?
In general I think that this is not the best forum for this question.
Best Regards
Marcin Cholewczuk -
Freecorder autodeleted during FF auto-update, and was not autoupdated
I thought I read that FF new behaviour was to update automatically, frequently, BUT it will ASK YOU FIRST if it finds an existing Addon that would be incompatible & deleted IF one proceeded with the Update.
I use very few Addins. Last week, FF updated without my asking, and DELETED my valuable 'Freecorder 4' without first warning that it will NOT update the Addin at same time as updating FF.
That was very annoying as without notice, I am now without Freecorder. Is that normal ?
Two further questions;
1 I was only seeking a standalone 'Recorder' that Records ALL audio currently playing, and has simple Start/Stop recording, and adjustable bitrate. But 'Freecorder' installs as a browser 'Adding' and inserted an overly large toolbar, which I would rather not have. What I like about Freecorder is it records to MP3 with adjustable bitrates, not wasteful wav, and it makes good recordings, not wasting filespace during silent periods.
Does anyone know if there is a similar free product that doesn't require a browser to launch it ?
2 While googling to see if anyone else had above problem just now, I read an item saying Freecorder was suspected to have Adware, and reported back to Applian.
Does anyone know if this is true, and if there is a fix to prent this behaviour ? (I use AVG & Spybot)Looked at your link thanks, which I see refers to using 'Freecorder 3' (it is an old version, 1 before the V4 I installed a few years back) to augment Audacity
I think my previous reply maybe not sufficiently detailed. The beauty of Freecorder was it records (think in mono) simultaneously the streaming audio of both input and output audio channels that pass through the 'soundcard'. i.e can record a Skype or other Voip call. I didn't see that in the Audacity list of features.
Since my first post, googling 'freecorder review' did bring up in cnet.com lots of very worrying user reviews e.g. "Malware - Avoid This!", and that subesquent versions of Freecorder (currently V7) are worse. -
Updated Class files not generated
Hi ,
I am using Eclipse SDK Version: 3.2.2 and have configured with my project and weblogic server. When the application is running in debug mode if necessary making some fix and when i use ctrl+b the new class file should be generated and immediately the application should refer to the new class file without expecting to restart the weblogic server.
But that's not happening, when i do a ctrl+b the class files are cleaned and new class files are not getting generated,moreover this cleaning is also consuming lot of time.
Can some body help me to resolve this , so that i can save lot of time in restarting the server for every small fix too.
Regards
SathyaHi ,
I am using Eclipse SDK Version: 3.2.2 and have configured with my project and weblogic server. When the application is running in debug mode if necessary making some fix and when i use ctrl+b the new class file should be generated and immediately the application should refer to the new class file without expecting to restart the weblogic server.
But that's not happening, when i do a ctrl+b the class files are cleaned and new class files are not getting generated,moreover this cleaning is also consuming lot of time.
Can some body help me to resolve this , so that i can save lot of time in restarting the server for every small fix too.
Regards
Sathya -
How to proper update iOS6 to 3GS if unfinished and how long its take to complete update? Because I can't finish yet due my Internet connection was poor, but I try again to update and the time it make longer than the first time I tried?! Help pls! Thanks
Get a better internet connection.
-
Profit Center was not maintained during order n billing creation.
Dear, Gurus
I'm facing a problem of Profit Center. User created a service material, maintenance contract. They created a Billing Document as it is order related billing. Accounting document was not generated when saving invoice. When I got to the bottom of this I realized no costing tabs were ever maintained for material type services. (Henceforth no Profit Center in Sales Order n Invoice).
I have done the necessary config n assignments but question now is what should I do as in billing doc the field is greyed out it will not allow me to assign Pr Center now. I am thinking that this may work if I cancel the billing document and then go back to sales order and try and changing the field, then re-create the invoice. I'm trying to avoid canceling. Is there any program, bapi, user exit I may use to re assign or make system re check the MM while saving invoice to allow accounting document to be created? This is one scenario.
2nd scenario is similar but in the case of this contract everything was made. Accounting document was cleared even but with some dummy weird Profit Center. (No proft center in Order nor invoice.) Whole problem at first in this scenario is User saying everything is complete so status in doc flow should show maintenance contract as complete but wasn't. it showed being processed. I discovered no completion rule was maintained. I maintained E Full target value referenced but status still has not changed any idea guys? (New config not showing on old existing data only show on new document, concept?) Is there a program or anything to make system update status doc flow? aside from this Profit center incompletion log is coming in Contract. Not maintained in order or invoice.In one of my earlier projects, a similar requirement was putforth by users and we had developed a zee tcode to change the profit center in billing document via SM30 which can be done only by FI authorised users.
I am reproducing the said program as under:-
REPORT "ZPROFIT_CHG"
TABLES : VBRP.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS : SO_VBELN FOR VBRP-VBELN OBLIGATORY.
PARAMETERS: P_PRO LIKE VBRP-PRCTR OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF IT_VBRP OCCURS 0,
VBELN LIKE VBRP-VBELN,
POSNR LIKE VBRP-POSNR,
PRCTR LIKE VBRP-PRCTR,
END OF IT_VBRP.
DATA COUNT(3).
DATA W_MESSAGE(30).
START-OF-SELECTION.
LOOP AT SO_VBELN.
IF SO_VBELN-LOW CA '~`!@#$%^&*()_+|\=-><,.;":' OR SO_VBELN-HIGH CA '~`!@#$%^&*()_+|\=-><,.;":'.
MESSAGE 'Special character not allowed' type 'S'.
LEAVE LIST-PROCESSING.
STOP.
ENDIF.
ENDLOOP.
IF P_PRO CA '~`!@#$%^&*()_+|\=-><,.;":'.
MESSAGE 'Special character not allowed' type 'S'.
LEAVE LIST-PROCESSING.
STOP.
ENDIF.
SELECT B~VBELN B~POSNR B~PRCTR FROM VBRK AS A INNER JOIN VBRP AS B ON A~VBELN EQ B~VBELN INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
WHERE A~VBELN IN SO_VBELN
AND A~FKART EQ 'ZFF2'
AND A~FKSTO NE 'X'.
IF SY-DBCNT EQ 0.
MESSAGE 'NO DATA FOUND' TYPE 'S'.
LEAVE LIST-PROCESSING.
ENDIF.
SORT IT_VBRP BY VBELN.
DELETE ADJACENT DUPLICATES FROM IT_VBRP COMPARING VBELN.
CLEAR COUNT.
IF IT_VBRP[] IS NOT INITIAL AND P_PRO IS NOT INITIAL..
LOOP AT IT_VBRP.
UPDATE VBRP SET PRCTR = P_PRO WHERE VBELN = IT_VBRP-VBELN AND POSNR = IT_VBRP-POSNR.
IF SY-SUBRC = 0.
COUNT = COUNT + 1.
ENDIF.
COMMIT WORK.
CLEAR IT_VBRP.
ENDLOOP.
ENDIF.
IF COUNT IS NOT INITIAL.
CONCATENATE 'No Of Records Updated Is - ' COUNT INTO W_MESSAGE.
MESSAGE I000(ZSFL) WITH W_MESSAGE.
ELSE.
MESSAGE 'No Records Updated' TYPE 'S'.
ENDIF.
Since I am so weak in ABAP coding, not sure whether the above coding is correct. You need to check with your ABAPers and develop this logic. This should work.
thanks
G. Lakshmipathi -
I am new to flash and I need to debug a movie from within a
browser. I have successfully published the movie with "permit
debugging" selected, embedded the movie in the webpage, and
connected to it with the debugger. However, the lack of an SWD file
keeps me from being able to set breakpoints. I don't know what I
need to do to get the SWD to be genereted - I thought it would be
if I selected "permit debugging" (even set a password), but it was
not generated. I am using the trial version of Flash CS3
Professional.
Thanks,
StephenI should also add that I am on a Mac and I've run through all
the updates.
Stephen -
Purchase Order from EBP was not created
Hi people,
I have a problem with an approved shopping cart that must generate a Purchase Order in R3.
But:
- The order was not generated in R3
- I have an entry in bbp_document_tab table in EBP system
- When I check the status of the Shopping Cart in transaction BBP_PD I can see the item in "Item in Transfer Process" status.
- When I check the Application Monitor in EBP system, there is no messages related to this Shopping Cart.
- The report CLEAN_REQREQ_UP is schedule to run every 25 minutes and after it runs, the entry in bbp_document_tab remains there.
- I checked the dumps in R3 system using transaction ST22 but I could not find entries (I have searched using the RFC user).
What else I can check? If I have an error when BAPI_PO_CREATE1 is called, where it is logged?
Thank you!Hi
You need to take help of ABAP resource here.
Using the same data what you are passing in the shopping cart, directly create a purchase order both
1) using ME21N transaction directly and
2) then using 'BAPI_PO_CREATE1' bapi using a custom program in this case.
3) Incase you are using ECS, then implement BBP_CREATE_PO_BACK BADI and put a break-point there and then you can easily figure out, what's the problem happening as soon as BAPI - 'BAPI_PO_CREATE1' is called from SRM system using RFC call there.
Do let me know your findings.
Regards
- Atul -
MIRO FI DOCUMENT NOT GENERATED
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Don't use ALL CAPS in your title.>
Hi pls help me on this
MIRO invoice posting happend erorr is but there is no subsequent Accounting doc generted
pls solve this issue as a priority basisHi Friend,
Do you mean to say that MIRO Document was generated but FI Document was not generated??
If so then please check the Note 980860
Regards,
Jigar -
File was not deleteing in my file adapter
Hi,
in my File adapter (<b>sender side</b>) is not working fine.. if i put the processing mode is '<b>DELETE'</b> my adapter is not working.. if i put the processing mode is 'TEST' then my file is polling and outfile was generating.. why this was happending..
if keep processing mode is 'delete' then the file is polling but it was not deleting so, output also it was not generating... .. for what reason it was happening..
Thanks
babuHi Babu,
You must be using some user for accessing the file system for picking up tht file...
Check if the user has Delete access to the folder.
(You can set this property in the FTP Server UI)
Regards,
Sushil.
Maybe you are looking for
-
I am running OS10 on a MAC and every time I go too another web site (most of the time) a new tool bar pops up that says " Firefox prevented this page from automatically redirecting to another page" and on the other end I must hit the button ALLOW bec
-
i Want to clean out my iPad and bring back App Store and YouTube they disappeared. I am not computer literate.
-
Hey Gang, I have 2 internal hard drives. I read a post recently that mentioned something about having your app, samples/loops, and songs on different hard drives. Is this because of all the reading that must be done when the song is playing? I have g
-
Can't see my iPhoto events on Apple TV 2
Hi, In iTunes I selected to show all my pictures from the last 12 months on Apple TV 2. They indeed show up correctly, but all in one album. I want to have my events show up as well. I need to scroll through 3000 pictures to get to the most recent on
-
BEx Query: Attribute not display Unit of Measure (UOM)
In a BEx I am trying to create a query that displays attributes to 0EMPLOYEE. One of the custom attributes is the employee's rate of pay. We have the hourly rate, nightly rate, etc. This attribute is a numeric attribute with currency assigned as t