Update sales orders status after changing item completion rule

Hello!
I've just changed the item completion rule of a given sales document item (from 'B' to blank). But we have several old orders, which have deliveries created with reference, with some fields still open (due to the 'no reference' status at the item level). The orders created after the new condiguration are ok.
So, is there any way I can update the status of those old orders? Already tried the report SDVBUK00, but did not work out.
Any ideas are welcome.
Thanks.
Adriano Cardoso

Hi,
check if oss note 1472007 helps.
Regards,
JM

Similar Messages

  • Sales order status to show as Complete only after PGI

    Hello
    I have one requirement. Now currently in sales order status of the order is showing complete once the item being delivered.
    But our requirement is that, the status of the order should be shown complete only when PGI is done not after delivery.
    I would like to know if any exit or any other program will help us in finding this solution
    Thanks in advance
    Naveen

    Dear Naveen,
    Sales order status depend on Item Category completion rule, please check on VOV7 for your sales order item category. In standard SAP, below rule can we define with item category:
    Not relevant for completion
    A
    Item is completed with the first reference
    B
    Item is completed after full quantity has been referenced
    C
    Item is completed after the target qty is fully referenced
    D
    Item is referenced via contract release
    E
    Item is completed after full target value is referenced
    Hope it will helpful for you.
    Regards,
    Shatrughan Singh

  • How to update Sales Order status using  BAPI_SALESORDER_CHANGE

    Hi,
    I want to update Sales Order status using BAPI_SALESORDER_CHANGE, this BAPI is called from middle ware, but there is no parameter to pass the status value to this function, please help me how to update sales order status using BAPI only.
    Thanks
    RK

    Hi,
    Can u give me details of what status u would like to update in sales order.
    If we are able to update the status from VA02, Then BAPI will assist for the same.
    Regards.

  • Sale Order Status after dellivery of materials from Projects

    Hi,
    I have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
    On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
    Thank you in advance.
    Regards,
    Ranjan

    Hi,
    In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
    Thanks & Regards,
    Biplab Ranjan

  • Updating sales order pricing after partial delivery

    I have a requirement where due to an enhancement being implemented I need to be able to update the item pricing on the sales order after the item has been partially-delivered. Currently the standard system
    controls do not allow access to the Update Pricing button in the item conditions tab after a partial delivery for the item. Is there any way around this using the standard functionality?
    Regards
    BK GAIKWAD

    Dear,
           For update in sales pricing after delivery you require to reverse and delete delivery.
          Without delivery deletion it is not possible to update sales order's price.
          One more option is you can update your price in billing if you can not accounting of invoice.
    Regards,
    Sandip

  • Sales order status close when item partial invoice.

    Can anyone tell me how to solve this problem,
    i have a sales order (ZTP - 3rd party), when i create this sales order the status becoming "Being Processed".
    then im doing partial invoice ... when i check the header on table VBUK the status becoming slow.
    im working on my sales order status report for 3rd party order.

    Hi Nizam,
    1. Check Your Customer Master - Sales Area Data u2013 Shipping Tab - Partial Delivery per item - please remove Option D from Partiral Delivery per item.
    2. Check Incompletion Rule and Completion Rule on Sales Document type the backgroud table of Sales
    order and item category
    Inshallah it will help you alot, if not please you can ask me
    Regards,
    MH

  • Updating Sales Order Status in Batch

    Hi
    Please let me know if we can update Sales Order Line details like Ship To Address , Date , Status in a batch?
    We are using 11.5.10
    Thanks

    Use the Order management API or the OM interface tables.
    See irep.oracle.com for details.

  • How to unlock sales order number after changing its line item statuses.

    hi all,
            my requirement is i am changing the status of the double
           clicked sales order which is showing in ALV grid display
           before that i am locking that sales order using FM
           CALL FUNCTION 'ENQUEUE_EVVBAKE' and for
           changing the status i am using FM
            CALL FUNCTION 'STATUS_CHANGE_EXTERN'
            which doesnt have commit statement inside this FM so
           i have explictly written this commit statement if this FM
           gives SY-SUBRC = 0 but with this statement it unlock my
           sales order because of the commit functionality.
    also this FM is in loop for all line items for that sales order
    please help me with that!!!!

    Hi,
    I have created delivery against sales order.
    While picking (during delivery PGI), I selected two batches to suffice the delivery qty. Please refer the example quoted below.
    Sales order (SO1) - Material (Mat1) - qty (15 ea)
    Delivery against sales order (Del1) - batch split: batch1 - 10 ea
                                                                         batch2 - 5 ea
    In table LIPS: when I enter delivery number as "Del1" and execute, I get 2 records:
       del no.     Item No.      Material   Qty       Batch no       Sales Order no     Sales Order Item no
    1. DEL1       10              Mat1        10 ea    batch1          SO1                    10
    2. DEL1       20              Mat1         5 ea     batch2         ______                 ____
    Thus in the 2nd record, the Sales order no.(LIPS-VGBEL) and sales order item no. (LIPS-VGPOS) does not get updated.
    I have to develop a report to display the Sales Order number and sales order line item number for each batch of the Delivery for the same item number. Please guide me to know how I can get the same.
    Hope this clarifies the issue faced.
    Regards,
    Ankush

  • Sales order status after resource related billing

    Hi All,
    When I am creating a resorce related billing debit memo request from DP90 with reference to a sales order, the status of my sales order item is not getting updated.
    Since i am referencing my SO items in DP90, ideally the 'Referencing status' for the order items should get as 'Fully referenced'
    Kindly help
    Aribis

    Hi Aribis
    IN IMG, in Sales and Distribution->Sales->Sales Document->Sales Document Item-> Item category, check the item configuration - one of the first fields should be completion rule, check tht it has the right completion rule, e.g. completed after full quantity has been referenced.
    hope this helps
    Kikas41

  • Sales order status not changed

    Even after all line items Delivered and  Accounting document cleared, sales order's status is "Being Processed".
    SO is still showing open order list in VA05..There are not much changes done in SO...What could be the reason...

    Just check the customer master in Sales Area data Shipping tab - Partial delivery per item. It should be set as D - No limit to subsequent deliveries. Change it to some other value as per the business requirement, and check with new order. It will not show the status Being Processed.
    Master data plays a major role in any such conditions.
    Thanks/Sheetal

  • Inbound IDoc used for updating Sales order status

    I have a requirements to set use standard IDoc to send out the Sales order to a non-SAP software as well as receiving Inbound IDoc to update the status of sales order in SAP. Could someone comment on my questions below:
    1. What are the difference between all the ORDERSxx Idoc types?
    2. What IDoc should be used for Inbound IDoc to update the sales order stataus in SAP?
    3. Can the same IDoc type be used for both Inbound and Outbound with only the difference in the segment of Direction?
    Thank you. Points will be awarded appropriately for helpful comments.

    Hi,
      1.Intially  standard IDOC types "ORDERS01"  is having limited
          segments. After few months the requirement got increased to
          add more fields to "ORDERS01".So,once you release the IDOC
          type you can not add any more fields .So SAP come up
          with "ORDERS02" with new fields.Like that all IDocs types have
          some more new seg ments.
    2.You  can use ORDER05
    3. Yes you can use same IDOC type

  • Updating Sales Order Status

    Hi
    I have a senario, Clarify RA's are interfaced to Oracle with Entered Status, some validation has to be performed before making the Order Status to Booked,
    Could any help me the API Process how to do
    Thanks

    The same package has Book_order and update_booked_flag procedures which do check a number of things before booking the order. If you want to do the same before you complete the activity in workflow, you can just borrow the code from there and do pre-validations to make sure that there are no hiccups in booking the order.
    Attributes check is done in OE_Validate_Header.Check_Book_Reqd_Attributes and OE_Validate_line.Check_Book_Reqd_Attributes and other important checks like sales credits at the header level and other validation with respect to invalid configuration (if you are using models and configuring the product) or prepayment is not valid and so on. You can call all these checks before you complete the activity.
    Thanks
    Nagamohan

  • Sales order costing after changes on configuration or sales order BOM

    Hi all
    Our sales order items requruire an sales order costing. This is done automatically, when saving the sales order item:
    Settings in requirement class:
    - costing: X (costing required)
    - costing-ID: B (automatic costing and marking)
    This works perfect, means the sales order receives a caluculation that is marked.
    Now, something is changed on the sales order BOM with transaction CU51
    It seems, that each time you change the BOM you have to ensure yourself, that the costing of the sales order items (via VA02 -> extras -> costing) has to be performed manually.
    There is no SAP standard process, that does this automatically.
    Thanks for your feedback.
    Pius

    Dear Pius,
    System cannot take the changes from the BOM and execute the cost estimate automatically.
    Need to refresh system when the changes are happened i..e need to execute the Cost Estimate once again.
    Kind Regards
    Umapathi G

  • Sales order status showing Completed, after I do partial delivery

    Dear All, Good morning
    I'm Creating an order for 5 quantities and creating a delivery for 2 Qty',
    my problem here is the sales order status is showing complete and I'm unable to create a delivery for the remaining Qty.
    I've checked with the Copy controls for OR - LR(T.code: VTLA) , for your reference I'm showing it below,
    FOR HEADER
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Copy Item Number is not CHECKED
    FOR ITEM
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Update Document Flow is CHECKED & Positive/Negative Qty
    Please its urgent.
    Thanks & Regards

    hello, friend.
    in addition to what the others have said, please check your customer master, particularly in the Sales Area Data > Shipping tab.  look at the partial deliveries.  there may have been settings that tell the system if a delivery has been created with reference to the sales order, the order will be completed even if the quantity is only partially delivered.  if the entry in the 'partial delivery per item' field is 'B', then this will explain your situation.
    this can also be manually set in the sales order, so you have to take a look at the order as well, at item level.
    regards.

  • Sale Order Status Change after delivery of materials from projects

    have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
    On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
    Regards,
    Ranjan

    Hi,
    In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
    Thanks & Regards,
    Biplab Ranjan

Maybe you are looking for