Update Screen with the updated entries?
I have create a simple interface where user can see the entries that are in the tab view.
I have a delete button where once pressed, LOV will pop up and allow the user to choose which entry they wish to delete.
When the user has selected the entry, it will be deleted from the db.
Now my question is: how can I update the screen such that the screen will show the updated entries in the db.
the problem is that the entries are already shown on the screen... in a tab view.
Hence, the button allows a lov to pop up for user to select which one to delete.
I have added the commit but it doesn't refresh. I have to manually click on the next and previous entry button to see the newly updated screen.
So is there a way to refresh the screen without doing the manual refreshing?
Similar Messages
-
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
I went to update my ipod touch and it said it may take an hour. so i left it plugged in over night. in the morning the ipod was frozen. it had the apple logo and the loading bar. i reset the ipod and it stays at the same screen. i just restored it, reset it again, and restart my computer, but everytime it turns on it stays on that screen with the logo and loading bar. how do i fix it?
Were all the apps bought under the same Apple ID? For example if a husband and wife share the same computer but have different apple ID's what he buys won't play on her iPad and vice versa. However if they shared the same Apple id for both devices then any compatible apps would transfer and work on both.
-
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
I connected my i-pad 3 to my i-mac computer to sync music. Once connected it said I had an update to ios6 for my i-pad. I did as instructed. at the end it said it could not install because of error 1603. Now the i-pad will not shut now. It just has a black screen with the apple icon on it. Help
This is the ipod touch forum.
Try posting in the ipad forum -
I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything. Any suggestions?
Is your iphone hacked/jailbroken?
-
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
will my voice mails be lost if my phone froze trying to update itunes? I have the screen with the USB and the itunes circle. phone completely dysfunctional.
as ar as I know, voicemails aren't stored on your iPhone, your carrier saves them.
To solve the problem you're having, use this: http://support.apple.com/kb/HT1808
Using his article will erase everything on the device, so make sure you have a backup!
Good luck
Message was edited by: jesterwylde -
I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3.
Thank youThe following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I download a suggested "update" from the App Store for my iPhoto yesterday. Now when I try and open my iPhoto, I get a grey screen with the rotating circle icon in the middle......that just keeps rotating. Ergo, it won't open!!! Before the "download" all was fine in Heaven & Earth....now, I'm a little peeved.
Anyone have a suggestion?
Thanks,
Wayne K.
ps Have a good day, God Bless America ...............and be weary of iPhoto update downloads,very weary.No need to be wary of iPhoto updates however it is a good idea to follow the instructions when updating. I haven't updated iPhoto from the App Store before however it should not be much different than doing a DVD update. Here are instructions on updating the library:
http://support.apple.com/kb/HT4431 -
After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.
See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My apple TV automatically updated and now that the update is done, I get a screen with the back of the Apple TV showing a plug coming out of the HDMI spot pointing toward a music sign. How do I get the menu screen back?
The update didn't apply correctly. You need to grab a micro usb cable and connect to iTunes for restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I'm trying to update my iPhone 4s to iOS 7.1.2 and it just froze on the screen with the apple and the loading bar, it won't move and it's been like 45 minutes PLEASE HELP!
iOS updates can take a while, try back in an hour or so. My iPad took half an hour for an incremental update. And that was on a fast home WiFi.
-
As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lionLimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread. -
Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.
hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.
Maybe you are looking for
-
Why doesn't deleting Voice Memos in iTunes delete them on my iPod Touch
hi. i synch my ipod touch with itunes and all my newly recorded voice memos come to my library in the voice memo playlist. according to the ipod touch manual i go and delete the unnecessary voice memos in my library and typically they are deleted fro
-
Error in generating Outbound Xml in SNC
Hi All: We are working on SNC 7.0 vrsion along with Pi 7.0 and ECC 6.0. When SNC gets a PO from ECC and supplier confirms it then we are not able to see any outbound xml file generation in SNC . Due to this nothing is coming out from SNC. Folowing ar
-
Battery not installed after update
I just updated my ThinkPad W520 using the System Update utility and after rebooting I realize that the battery icon is totally gray and shows the message "Battery not installed". Checking the installations log of System Update I see -Lenovo Power Ma
-
i need help finding i photo on my mac air
-
Aperture Presets and BorderFx Presets
I know that many people have created presets for Aperture 3, which can be exported and shared with others when it comes to processing/adjusting images. I was wondering if there is a similar way to share presets saved with an Aperture Plugin like Bor