Update system status in SM13 - where the information is stored?

Hi,
Where does SAP store the information about the update system status in SAP.
I have deactivated in SAPNetweaver trial: "Update deactivated by User" in SM13
but I don't find any information in tables such as VBHDR, VBMOD.
May be someone has an ABAP program which already do the job.
Thanks for any kind of help for a perl hacker drowned in SAP Tables

Hi Bertigo,
I am afraid that this info what you have asked for is not stores in any table.
If the system statuses are static then they can be stored but since u need a live update system monitor which i believe is not present in sap.
For more clarification on the update monitor pls follow the below link
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de873b35cd11d3acb00000e83539c3/frameset.htm
Thanks and Regards
Srikanth.P

Similar Messages

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

Update System Status for Quality Notification

I have a program that completes a Quality Notification.
I would like to know if there is a bapi, badi or function module to change the system status before I complete the notification. When I click on the icon in the notification to complete it, a pop up box comes up to change the status to NOTI or NOTE. I would like to do the same in my program before I complete it.
Any help would be appreciated.
Marianne

Hi,
You need to get the OBJNR(object number) for the notifications and then use the FM: STATUS_READ.
This FM will give you list of all the status or only active status( Set ONLY_ACTIVE = X in FM)..
Hope this helps
Regards
Shiva

HT5262 where does the information get stored when you back up your i-phone? It just reports its done but I have no idea where to find it if I need it again!

Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
Thanks

You can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage")

I am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

Backing up, updating, and restoring iPad, iPod touch, and iPhone software
more detailed information about backing up

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

Where the table is stored.,temp tablespace is not freed .

I have created one table in oracle 8.1.7 containing 500 mega records .
my question is
1. where the table is stored as the size of users.dbf is just 20 mb and is used upto only 2 MB.
so it must not be there.
2. the size of tools.dbf in tools tablespce is somewhere around 13GB. is it there?
if yes then why?
3. also the size of temp01.dbf+temp02.dbf + temp03.dbf in temp table space is somewhere around 14 gb and it is going on increasing. say when i give command to create index it after running for some 8 hrs gives error that disk space is full . when i again run he command after adding more file and space the command runs but the space earlier utilised in temp is not released .
i have tried restrating the oracle service . but it does not release the space utilised by temp.Also the table space is temp not permanent.
IMP.
4. can i manually delete the data files in temp.
will it affect my database????
thanksin adv.

I have created one table in oracle 8.1.7 containing 500 mega records .
my question is
1. where the table is stored as the size of users.dbf is just 20 mb and is used upto only 2 MB.
so it must not be there.
2. the size of tools.dbf in tools tablespce is somewhere around 13GB. is it there?
if yes then why?
3. also the size of temp01.dbf+temp02.dbf + temp03.dbf in temp table space is somewhere around 14 gb and it is going on increasing. say when i give command to create index it after running for some 8 hrs gives error that disk space is full . when i again run he command after adding more file and space the command runs but the space earlier utilised in temp is not released .
i have tried restrating the oracle service . but it does not release the space utilised by temp.Also the table space is temp not permanent.
IMP.
4. can i manually delete the data files in temp.
will it affect my database????
thanksin adv. Query user_segments as the table owner. This will tell you which tablespace (also the size of you table allocation).
Query dba_data_files, may need to be a DBA account (e.g. system). This will relate files to tablespaces.
The files in dba_data_files and in v$logfile and the control files listed in init<sid>.ora comprise your database.
Hope this helps
Ken

Table name where the text attachments stored

Hi folks,
         I have created an text attachment while creatng PR. where do these attachments store. In which table can i see the attachments that i have made while creating PR.Please suggest.
Shyam.

Hi Abhishek,
               thanks for your anshwer. But, If it is just text we can read using READ_TEXT, but i need to check whehter is attachment is created for a specific PR or not. Any input on the table name, where the attachments are stored..
                    Thanks,
                    Shyam.

Storage Bin where the material is stored

Hello,
I just uses Inventory Management and not the Warehouse Management.
In Inventory Management you define where the material is stored, in the material master data.
However, I need to know if is possible decided at the time of good receipt, where the material will store.
I appreciate your help.
Regards,
Hector.

Thank you Charlie.
Best Regards,
Hector

Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.

I tried the recommendations for fixing this below:
Follow these steps to grant full permissions to the folder where the files are stored: 1. Right click on the folder on the external drive and click on
properties. 2. On the property window, click Security tab.
3. Now click on Edit and then click Add.
4. Now type everyone in the box and
click OK.
5. Then check Full control check box.
6. Click on Apply and then click OK.
You may also try the below mentioned steps:
1. Click on Start. 2. Go to Control Panel. 3. Select "SOUND". 4. Double click on speakers. 5. Click on advanced tab and then uncheck enable audio enhancements.
But then I received the error message that I don't have rights to edit and add. Why would this be? I am the administrator?
Thanks!

Hi,
Please first take ownership of the folder or files, then give yourself full control permission.
Learn How to Take or Assign Ownership of Files and Folders
http://technet.microsoft.com/en-us/magazine/ff404240.aspx
Yolanda Zhu
TechNet Community Support

Change where the cache is stored

Hi folks,
Wee bit stuck, there are known issues with the cache becoming
corrupt as per the link
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=5989f7f4,
i'm trying to find out how to change where the cache is stored
currently is lies; Documents and Settings\mktsk8v\Application
Data\Macromedia\Dreamweaver MX 2004\Configuration\SiteCache
All i can see is an option to completley disable the cache.
any help appeciated
Stew

I don't think you can change this. Why do you want to?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Stew B" <[email protected]> wrote in
message
news:e78od3$ub$[email protected]..
> Hi folks,
>
> Wee bit stuck, there are known issues with the cache
becoming corrupt as
> per
> the link
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=5989f7f4,
> i'm
> trying to find out how to change where the cache is
stored currently is
> lies;
> Documents and Settings\mktsk8v\Application
Data\Macromedia\Dreamweaver MX
> 2004\Configuration\SiteCache
> All i can see is an option to completley disable the
cache.
>
> any help appeciated
>
> Stew
>

HT4137 When I back up my iPhone using iTunes, where does the information get stored?

I have a problem.
I have an iPhone that has already been synced with an HP laptop. This PC is now in need of repair but the price of repair was too costly so I bought a MacBook Pro to replace it.
I would like to now sync my iPhone with my new MacBook using iTunes but when I attempt this I get a message stating that all the information in my iPhone will be replaced by all the information in iTunes (which is nothing). I cannot afford to lose all the information in my iPhone but also I cannot update my iPhone using iTunes because it has not been paired with my new MacBook and I am told that it can only be paired with one computer at a time. I cannot unpair it with my old PC because my old PC doesn't even boot up anymore.
I was told that I could Backup the information in my iPhone by control clicking on the icon in the toolbar to the left of the iTunes screen which would then let me sync safely. I have now done this but I still have nothing to show for this in the iTunes library (no music, photos, notes, contacts etc.) and I have no idea where this backup has been stored.
Also in the help menu in iTunes it says that media files such as songs, videos and some photos AREN'T backed up but can be restored by syncing with iTunes (how is this possible to restore something that hasn't been backed up in the first place?).
I am really stuck with this and hope that someone out there can help.
Leigh

The first step in the sync process is to create a backup. On a mac this backup is located at
~/Library/Application Support/MobileSync/Backup. The backup does not included iTunes media as it is assumed to be in the iTunes library you are syncing with. Also, as you have discovered, when you first sync with a new iTunes library iTunes will erase all iTunes media on the phone (music, videos, etc.) and replace it with the media in the library you are syncing with. Photos from Camera Roll (which are taken by the phone) are part of the backup. Photos in Photo Library (which were synced to your phone from your computer) are not; again, because it is assumed they are already on your computer as that is how they were synced to your phone in the first place.
What, exactly, is still on your phone at this point?

Update system status in JEST table

Hi Experts,
I need to update the system status TECO as inactive in table JEST based on some condition from program manually. It might not be suggested to directly modify the database table. I got one BAPI function module BAPI_ALM_ORDER_MAINTAIN, but could not find how to use it.
Can you please let me know whether there are any BADIs or BAPIs to update the system status in JEST table.
Thanks in advance for you help.
regards,
Lakshmi.

Hi ,,
Thank you for your suggestion. but I got a FM which exactly updates the system status in JEST and JCDS tables.
The function module STATUS_CHANGE_INTERN and can be used as follows. We always need to follow one condition that, when the system status TECO is changing to inactive the REL status should be made Active.
    DATA: i_stat TYPE STANDARD TABLE OF jstat.
    DATA: wa_stat TYPE jstat.
    wa_stat-stat = 'I0045'.
    wa_stat-inact = 'X'.
    APPEND wa_stat TO i_stat.
    wa_stat-stat = 'I0002'.
    wa_stat-inact = ' '.
    APPEND wa_stat TO i_stat.
    CALL FUNCTION 'STATUS_CHANGE_INTERN'
      EXPORTING
        client              = sy-mandt
        objnr               = lv_objnr
      TABLES
        status              = i_stat
      EXCEPTIONS
        object_not_found    = 1
        status_inconsistent = 2
        status_not_allowed = 3
        OTHERS              = 4.
COMMIT WORK.

Maintaining the systems status as release at the time of upload

Dear all,
While uploading the master data for Business Entity and Buildings I want to make the system status as release. How do we achieve this?
Also at the time uploading the contracts I want to make the system status of the contract as active. How can we do this at the time of upload.
Expertu2019s pointers are highly appreciated.
Regards.
Vara Prasad

Hi Vara,
I guess you are using the API_RE_* function modules for uploading the data. You can use these
APIs also to set the system status. You have to set the parameter ID_TRANS and provide the activity that sets the status (example: for system status "released" the activity BFRE, for activation of contracts the activity is MCAK).
I hope this information is helpful for you.
Regards, Franz

What is the table name where user information is stored?

Where can I find the data that is input when a portal user is created / updated? I tried the PORTAL.wwsec_person$ table, which looks like it should be the one, but most fields are null. I know I put in an email, for example, it is a mandatory field, but the field is null in this table.
Can anyone help??

Hi,
Which version of portal are you using? If it is 902 then the information will be available in the OID server. You can get values from OID using the dbms_ldap_utl package. If you have access to st-doc.us.oracle.com then go to this link http://stdoc.us.oracle.com/9.0/920/network.920/a96577/dbldputl.htm#1022990 to understand more
Thanks,
Sharmila

Update system status in SM13 - where the information is stored?

Similar Messages

Maybe you are looking for