Update System Status for Quality Notification

I have a program that completes a Quality Notification.
I would like to know if there is a bapi, badi or function module to change the system status before I complete the notification. When I click on the icon in the notification to complete it, a pop up box comes up to change the status to NOTI or NOTE. I would like to do the same in my program before I complete it.
Any help would be appreciated.
Marianne

Hi,
You need to get the OBJNR(object number) for the notifications and then use the FM: STATUS_READ.
This FM will give you list of all the status or only active status( Set ONLY_ACTIVE = X in FM)..
Hope this helps
Regards
Shiva

Similar Messages

  • Set a User Status for Quality Notifications only if they are "Activated".

    Hello experts:
    I need to be able to set a User Status for Quality Notifications only if they are "Activated".
    When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification".  Initially, the only difference between the inactive "Defect Notification" and the active  "Quality Notification" is that  the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
    So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
    I checked the business rules for status DEFR and found that the following processes clear this status
      PMM1 -  Postpone Notification
      PMM2 -  Put Notification In Process
      PMM3 -  Assign Order
      PMM6 -  Put Notification In Process Again
    Any Ideas ?

    Perhaps some additional information would help you understand what I need to do.
    For notification type F3, we are recording all defects found in production.
    Most of these are expected defects that result in a minor reduction in yield.
    For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
    However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
    When this happens we manually activate the notification and assign tasks to find and correct the cause.
    It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
    The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing.  I therefore want to use the Activation event as the trigger to set my user status.

  • User status for quality notification

    Hi All,
    from which table we can get user status for a particular notification which is  active status.
    Thanks in advance

    Hi,
    You need to get the OBJNR(object number) for the notifications and then use the FM: STATUS_READ.
    This FM will give you list of all the status or only active status( Set ONLY_ACTIVE = X in FM)..
    Hope this helps
    Regards
    Shiva

  • FM for changing system status in Service Notification

    Hi all,
    I have a tough situation here.
    To change the system status in service notification, the system use "IQS4_CHANGE_STAT_NOTIFICATION".
    CALL FUNCTION 'IQS4_CHANGE_STAT_NOTIFICATION'
      EXPORTING
        i_qmnum                  =
        i_vrgng                  =
        I_CHECK_ONLY             = ' '
        I_SPRAS                  = SY-LANGU
        I_BEZDT                  = SY-DATUM
        I_BEZUR                  = SY-UZEIT
        I_POST                   = 'X'
        I_COMMIT                 = ' '
        I_WAIT                   = ' '
        I_REFRESH_COMPLETE       = 'X'
      IMPORTING
        E_VIQMEL                 =
        E_STTXT                  =
        E_ASTXT                  =
      TABLES
        RETURN                   =
    2 main fields are required; i_qmnum and i_vrgng.
    I am able to provide i_qmnum (as this is the service notification number that i need to change).
    However, i_vrgng is a field in table (TC33-VRGNG). The values in the table does not make sense to me.
    Example. To change the status to NOPR (Put in progress), the FM uses PPM2 or PPM6 for i_vrgng. If we take a look at the table TC33, it doesn't indicate in anyway how NOPR is related to PMM2 or PMM6.
    Is there a guideline (ie, to change status to OSTS, i use a certain value in TC33-VRGNG to run the FM)?
    Please see BAPI_SERVNOT_POSTPONE & BAPI_SERVNOT_PUTINPROGRESS for a clearer picture of what I'm saying.
    Thanks,
    Earl

    Please try using FM STATUS_CHANGE_INTERN for changing System Status as i was not able to find any link between status and the field provided in FM in ur post.
    This FM directly changes system status of any object.But this FM requires System Status Value not Text.
    NOPR, NOCO etc are system texts.The main table for system status  is TJ02T which will give u the status value for the status text.
    For eg NOPR status text will have status value as 'I0070'.
    Reward Points if useful
    Edited by: Pratyasha Shishodia on Mar 14, 2008 11:07 AM

  • Electronic signatures for Quality Notifications

    We are on 4.0b system and thinking of implementing electronic signatures functionality for quality notifications. Since SAP standard does not have this functionality we are planning to use Enhancement QQMA0014, function module exit EXIT_SAPMIWO0_020.
    To this effect, we are requesting your guidance for the following
    1.Is this customer exit available in latest version of SAP ?
    2. If we store these signatures (user id , date and time) in an custom table, can we move this custom table ,once we upgrade to a higher version.
    3. Is there any other way to implement electronic signatures for quality notifications in version 4.0b.

    Hi Isabelle,
    Thanks for your patience in understanding my question.
    My primary worry is if i use this exit to have electronic signatures in 4.0b and i know this functionality (Electronic  signatures) is standard in latest versions, what will happen to the electronic signature data that i create until i upgrade.
    The electronic signature data is the user id , date and time associated with a notification. I plan to store this in a custom table.
    I will appreciate , if you can share with me your analysis.
    Thanks
    Manoj Jain

  • Restricting authobject I_QMEL for Quality notifications and HR PCRs

    Hello,
    We have encountered an role conflict when the authorization object I_QMEL is used both for Quality notification and HR PCR access on the portal.  Here is the scenario.
    Quality Administrator has I_QMEL for:
    - notification type X
    - transaction IQS1 and IQS2
    - all work is done in the GUI
    Employee who is a Manager has I_QMEL for:
    - notification type Z
    - transactions IQS1 and IQS2
    - all work is done on the portal
    The role conflict arises when one user has both the Quality Administrator role and the Manage role.  The user can then use the GUI to view notifications of type Z - that any manager has submitted.  This means the user can view all personnel change requests in the systems.  These PCRs contain sensitive information.
    Any ideas on how I can design the security such that this role conflict is suppressed?
    Thanks!

    Hi Vicky,
    I have the same problems you had. I also need to implement your requirements 2) and 3)
    How have you solved your requirements? Please let me know your solutions.
    Thanks in advance
    Sarah

  • MB56 for quality notifications?

    Hi all,
    is there a possibility to see quality notifications for substream materials which were consumed for production of a finished good? I mean a kind of MB56 for quality notifications.You enter the finished goods material and batch and see if there were notifications for a material which was used to produce the finished good?
    Does this exist somewhere in the R3 - system?
    Thank you for your help!
    Alex

    Hi Isabelle,
    Thanks for your patience in understanding my question.
    My primary worry is if i use this exit to have electronic signatures in 4.0b and i know this functionality (Electronic  signatures) is standard in latest versions, what will happen to the electronic signature data that i create until i upgrade.
    The electronic signature data is the user id , date and time associated with a notification. I plan to store this in a custom table.
    I will appreciate , if you can share with me your analysis.
    Thanks
    Manoj Jain

  • Update system status in SM13 - where the information is stored?

    Hi,
    Where does SAP store the information about the update system status in SAP.
    I have deactivated in SAPNetweaver trial: "Update deactivated by User" in SM13
    but I don't find any information in tables such as VBHDR, VBMOD.
    May be someone has an ABAP program which already do the job.
    Thanks for any kind of help for a perl hacker drowned in SAP Tables

    Hi Bertigo,
    I am afraid that this info what you have asked for is not stores in any table.
    If the system statuses are static then they can be stored but since u need a live update system monitor which i believe is not present in sap.
    For more clarification on the update monitor pls follow the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/de873b35cd11d3acb00000e83539c3/frameset.htm
    Thanks and Regards
    Srikanth.P

  • User exit for Previous and current system status  for  5 transactions

    Hi Experts
    My Objective to capture the Previous and current status  of system status  for  5 transactions  in their  user exits .
    Description                                         Business Object               Transaction
    Production Order operations              BUS2005                            CO02 to edit Production Order
    Maintenance Orders                           BUS2007A                         IW32 to edit Plant Maintenance Order
    INTernal   ORDER                                 BUS2075                          KO02 to edit Internal Order
    WorkBreakdownStruct                       BUS2054                          CJ02 To edit the WBS element
    Project System Network                      BUS2002                           CN22 to edit Network
    Activities Network
    For Both Production order  and   Project System Network Activities Network    ,
    i got  User exit  "  EXIT_SAPLCOBT_001  " 
    But i am not sure whether we can use this or  not for our purpose . When i am changing status and  then saving ,  my  break point comes  to  EXIT_SAPLCOBT_001  .
    But  can we capture   JEST   or   JCDS  related  data   in that  user  exit  or  How can we capture both Previous status  and Current ( Means New changed status ) . For eg  From Released   to   Technically complete   etc.
    I want Status changed and its immedtiate previous status. 
    Do i need to check Exit  or BADI  before  and after Saving .
    Thanks
    Regards
    Gaurav
    Edited by: TheGaurav on Sep 8, 2011 10:28 AM

    Hi Himanshu
    Many Thanks for the reply . 
    I also had some other processing needs to be done on the basis of those status. .
    So do you have any idea or  how to find what all exits or BADIs  i can use for all of these 5 transactions , where
    i can get data for JCDS ( or JEST ) .
    CO02 to edit Production Order                 
    IW32 to edit Plant Maintenance Order
    KO02 to edit Internal Order
    CJ02 To edit the WBS element
    CN22 to edit Network        
    can we use   EXIT_SAPLCOBT_001  for    CO02  and  CN22   .
    Edited by: TheGaurav on Sep 8, 2011 1:21 PM

  • System status for capacity availability in Process order

    Hi,
    I have activated the capacity availability check in SPRO to have a capacity check while process order  creation.
    But system doesnt provide any status in the process order for this. No status is appearing even  if I do a manual capacity check in process order.
    Is there any system status for capacity is available?.
    Thanks in advance
    Prathib

    Hi Prathib
    System will be give any status if capcity is available, but it will give a status MSCP if there is Capacity shortage.
    Rgds
    UK

  • System status for Internal order

    Dear SAP gurus,
    I want to automate the system status for Internal order that at the time of Final billing of invoice , the Internal order should be closed automatically.
    Is there any setting to do this.
    Thanks,

    Automatic option is not available. you need to customise for automisation purpose.
    you can do teco complete by changing the internal order. for the bulk you write LSMW or SCATT.
    thanks
    ANJI

  • How to find system status for production orders?

    How to find system status for production orders?
    looked into table AUFK, AFKO and AFVC but none of these tables, carry
    system status as part of the fields(STTXT)
    I tried to filter in COOIS, but not much help
    Able to find system status information in COHV,Is there any other way where
    I can find system status information for production orders
    Kindly guide

    Hi,
    Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
    But, it is very difficult to combine the details like Order and System status.
    Take the help of your ABAPer to generate Report for you.
    Regards,
    Siva

  • Setting System Status for CRM Contract

    Hi
    I need urgent help for changing the system status in CRMD_ORDER, once the Contract is saved.
    I tried to use the Function Module CRM_ORDER_MAINTAIN for setting the status. But this FM provides status change on user level.
    Please guide me how to set the system status for this scenario.
    Thanks in advance

    Hi.
    Try using CRM_ORDER_CHANGE_STATUS to change the system status.
    Regards,
    Timo.

  • Changing the System status for previous transactions

    Hello,
    Could some body help me with this ?
    I have a User status profile with user status ABC which triggers system status Inprocess. This is applicable for all the new transactions for which we set the status ABC which works fine. But we have some previous transactions  ( Prior to this config ) with status ABC , but system status is not Inprocess.
    How can we change the system statuses for all these transactions? do we have a report for this?
    Best Regards,

    Hi,
      You can use 'STATUS_CHANGE_INTERN' FM to change the system status. Pass Object number and status ID as inputs to the Function Module.
    Regards,
    Lakshmi.Y

  • T5120 Jumpstart: unable to update system firmware for automatic reboot

    Hi,
    i'm trying to install a T5120 using the jumpstart framework. During the installation the new boot device should be set but instead i get the information that is was not possible to do so.
    Installing boot information
            - Installing boot blocks (c0t0d0s0)
            - Updating system firmware for automatic rebooting
    WARNING: Could not update system for automatic rebooting
    WARNING: CHANGE DEFAULT BOOT DEVICE
             If you want the system to always reboot Solaris from
             the boot device that you've specificed (c0t0d0s0),
             you must change the system's default boot device using
             the eeprom(1M) command after installing Solaris software.the diag-switch is set to 'false'.
    {0} ok printenv
    Variable Name           Value                          Default Value
    ttya-rts-dtr-off           false                          false
    ttya-ignore-cd           true                           true
    keyboard-layout
    reboot-command
    security-mode           none                           No default
    security-password                                      No default
    security-#badlogins   0                              No default
    verbosity                   min                            min
    pci-mem64?              true                           true
    diag-switch?              false                          false
    local-mac-address?   true                           true
    fcode-debug?            false                          false
    scsi-initiator-id           7                              7
    oem-logo                                                 No default
    oem-logo?                 false                          false
    oem-banner                                             No default
    oem-banner?             false                          false
    ansi-terminal?            true                           true
    screen-#columns       80                             80
    screen-#rows            34                             34
    ttya-mode                 9600,8,n,1,-                   9600,8,n,1,-
    output-device           virtual-console                virtual-console
    input-device              virtual-console                virtual-console
    auto-boot-on-error?  false                          false
    load-base                 16384                          16384
    auto-boot?                 true                           true
    network-boot-arguments
    boot-command          boot                           boot
    boot-file
    boot-device               disk                           disk net
    multipath-boot?         false                          false
    boot-device-index      0                              0
    use-nvramrc?            false                          false
    nvramrc
    error-reset-recovery    boot                           bootDoes anybody have any ideas what the problem could be?
    I browsed several boards and a huge set of websites but did find anything related.

    At the first time yes, because i'm using an extra raid controller. That's because the environment 'boot-device' has to be set to a value different than 'disk'.
    At the end of the jumpstart installation i have to type 'init 6' for reboot manually and the environment 'boot-device' has its default value. Thats why the server isn't boot and fall back to net boot.

Maybe you are looking for

  • Data usage and battery drain has skyrocketed with iOS 8.1.2 (maybe earlier)

    3 weeks ago my wife got a text message on her iPhone 5 from AT&T that she had used 90% of her data for the month.  30 seconds later, she got another one saying that she had used 100%.  Granted, her data plan is small, 200 MB.  But, for the last two y

  • Vendor line item display

    Hi All Vendor invoice was keyed in Euro currency and local currency was usd.   Payment was posted in USD currency instead of Euro.  Though the document is cleared, in FBL1N amt in doc. currency shows balance in usd(+) and equivalent of Euro currency(

  • GL account that doesn't reset, after finished the post of end Fiscal Year

    Iu2019m facing a new problem while trying to perform the process of close fiscal year, the process that I do be the following: F.01> F.16>F_IT_01>F.16>F.01 After that all the process is done, i analyze the balance sheet, and see that some general led

  • IOS8 fails to display pdf-files in browsers

    When i try to open pdf files from a website in the browser (both Chrome and Safari for iOS) the pdf often will not load. I only get the grey background and the question to open in iBooks. Pushing open i iBooks does not help. The pdf never loads at al

  • Is a Macbook Pro right for me?

    So I'm looking in to buying a new computer, and I want to know if the Macbook Pro is right for me. (Making the topic title sort of self explanatory.) I've been using PCs all my life and I've recently been lounging around the Apple site and looking at