Update table into a badi
Hallo!
This is my first question... sorry for my english
I'm trying to update a table into a badi.
It's all ok when i debug my method, bat
when i execute the program without the break-points
it doesn't work,
it doestn't update the table?
Is there a commit problem, what can i do?!?
after update statement.
use below
if sy-subrc = 0.
COMMIT AND WAIT.
endif.
hope it works
Similar Messages
-
How to updated matrix into related table?
hi, can anyone help me below coding how to updated matrix into related table?
Thank you.
For rowNum = 0 To oMatrix.RowCount
oRecordset.Fields.Item("Code").Value = oMatrix.Columns.Item("DSCode").Cells.Item(rowNum).Specific.Value
oRecordset.Fields.Item("Name").Value = oMatrix.Columns.Item("DSName").Cells.Item(rowNum).Specific.Value
oRecordset.Fields.Item("U_RPTC").Value = oMatrix.Columns.Item("DSReport").Cells.Item(rowNum).Specific.Value
oRecordset.Fields.Item("U_USRC").Value = oMatrix.Columns.Item("DSUser").Cells.Item(rowNum).Specific.Value
oRecordset.MoveNext()
NextFor Fast Matrix Loading you can user some thing like this.
Dim Column As SAPbouiCOM.Column
Dim Matrix As SAPbouiCOM.Matrix
Dim Table As SAPbouiCOM.DataTable
Table = oForm.DataSources.DataTables.Add("Documents")
Table.Columns.Add("Code", SAPbouiCOM.BoFieldsType.ft_Integer)
Table.Columns.Add("Name", SAPbouiCOM.BoFieldsType.ft_Integer)
Table.Columns.Add("U_RPTC", SAPbouiCOM.BoFieldsType.ft_AlphaNumeric, 255)
Table.Columns.Add("U_USRC", SAPbouiCOM.BoFieldsType.ft_AlphaNumeric, 255)
Matrix = oForm.Items.Item("MatrixUID").Specific
Column = Matrix.Columns.Item("Code")
Column.DataBind.Bind("Documents", "Code")
Column = Matrix.Columns.Item("Name")
Column.DataBind.Bind("Documents", "Name")
Column = Matrix.Columns.Item("U_RPTC")
Column.DataBind.Bind("Documents", "U_RPTC")
Column = Matrix.Columns.Item("U_USRC")
Column.DataBind.Bind("Documents", "U_USRC")
Table.ExecuteQuery(SQLQuery)
Matrix.LoadFromDataSource() 'Load The Data to the Matrix
To pull the data form the display back to the Table you can use this
Matrix.FlushToDataSource() -
Update Row into Run Table Task is not executing in correct sequence in DAC
Update Row into Run Table Task is not executing in correct sequence in DAC.
The task phase for this task is "Post Lost" . The depth in the execution plan is 19 but this task is running some times in Depth 12, some times in 14 and some time in Depth 16. Would like to know is this sequence of execution is correct order or not? In the out of the Box this task is executed at the end of the entire load. No Errors were reported in DAC log.
Please let me know if any documents that would highlight this issue
rmUpdate into Run table is a task thats required to update a table called W_ETL_RUN_S. The whole intention of this table is to keep the poor mans run history on the warehouse itself. The actual run history is stored in the DAC runtime tables, however the DAC repository could be on some other database/schema other than warehouse. Its mostly a legacy table, thats being carried around. If one were to pay close attention to this task, it has phase dependencies defined that dictate when this task should run.
Apologies in advance for a lengthy post.... But sure might help understanding how DAC behaves! And is going to be essential for you to find issues at hand.
The dependency generation in DAC follows the following rules of thumb!
- Considers the Source table target table definitions of the tasks. With this information the tasks that write to a table take precedence over the tasks that reads from a table.
- Considers the phase information. With this information, it will be able to resolve some of the conflicts. Should multiple tasks write to the same table, the phase is used to appropriately stagger them.
- Considers the truncate table option. Should there be multiple tasks that write to the same table with the same phase information, the task that truncates the table takes precedence.
- When more than one task that needs to write to the table that have similar properties, DAC would stagger them. However if one feels that either they can all go in parallel, or a common truncate is desired prior to any of the tasks execution, one could use a task group.
- Task group is also handy when you suspect the application logic dictates cyclical reads and writes. For example, Task 1 reads from A and writes to B. Task 2 reads from B and writes back to A. If these two tasks were to have different phases, DAC would be able to figure that out and order them accordingly. If not, for example those tasks need to be of the same phase for some reason, one could create a task group as well.
Now that I described the behavior of how the dependency generation works, there may be some tasks that have no relevance to other tasks either as source tables or target tables. The update into run history is a classic example. The purpose of this task is to update the run information in the W_ETL_RUN_S with status 'Completed' with an end time stamp. Because this needs to run at the end, it has phase dependency defined on it. With this information DAC will be able to stagger the position of execution either before (Block) or after (Wait) all the tasks belonging to a particular phase is completed.
Now a description about depth. While Depth gives an indication to the order of execution, its only an indication of how the tasks may be executed. Its a reflection of how the dependencies have been discovered. Let me explain with an example. The tasks that have no dependency will have a depth of 0. The tasks that depend on one or more or all of depth 0 get a depth of 1. The tasks that depend on one or more or all of depth 1 get a depth of 2. It also means implicitly a task of depth 2 will indirectly depend on a task of depth 0 through other tasks in depth 1. In essence the dependencies translate to an execution graph, and is different from the batch structures one usually thinks of when it comes to ETL execution.
Because DAC does runtime optimization in the order in which tasks are executed, it may pick a task thats of order 1 over something else with an order of 0. The factors considered for picking the next best task to run depend on
- The number of dependent tasks. For example, a task which has 10 dependents gets more priorty than the one whose dependents is 1.
- If all else equal, it considers the number of source tables. For example a task having 10 source tables gets more priority than the one that has only two source tables.
- If all else equal, it considers the average time taken by each of the tasks. The longer running ones will get more preference than the quick running ones
- and many other factors!
And of course the dependencies are honored through the execution. Unless all the predecessors of a task are in completed state a task does not get picked for execution.
Another way to think of this depth concept : If one were to execute one task at a time, probably this is the order in which the tasks will be executed.
The depth can change depending on the number of tasks identified for the execution plan.
The immediate predecessors and successor can be a very valuable information to look at and should be used to validate the design. All predecessors and successors provide information to corroborate it even further. This can be accessed through clicking on any task and choosing the detail button. You will see all these information over there. As an alternate method, you could also use the 'All/immediate Predecessors' and 'All/immediate Successor' tabs that provide a flat view of the dependencies. Note that these tabs may have to retrieve a large amount of data, and hence will open in a query mode.
SUMMARY: Irrespective of the depth, validate
- if this task has 'Phase dependencies' that span all the ETL phases and has a 'Wait' option.
- click on the particular task and verify if the task does not have any successors. And the predecessors include all the tasks from all the phases its supposed to wait for!
Once you have inspected the above two you should be good to go, no matter what the depth says!
Hope this helps! -
Hi
I have in FORM code:
UPDATE Z_TABLE SET COL1 = 'value' WHERE COL2 = var
And in this program is also many inserts and BDC codes.
After execute all PERFORM is command COMMIT WORK AND WAIT.
Problem is only in update table Z_TABLE. Some rows in database don't have updated
values.
It is possible that this error exists because FORM is executed many times ?
If I change this code to the one command: UPDATE Z_TABLE from itab, this repaire
my all updates or maybe this is work the same like single record UPDATE?UPDATE dbtab - source
Syntax
... { {SET set_expression [WHERE sql_cond]}
| {FROM wa|{TABLE itab}} }.
Alternatives:
1. ... SET set_expression [WHERE sql_cond]
2. ... FROM wa
3. ... FROM TABLE itab
Effect
The specifications in source define which rows and columns are changed. Either individual columns are changed using the addition SET or entire rows are overwritten using the addition FROM.
After FROM, either a non-table-type data object wa or an internal table itab can be specified. The content of these objects determines - on the one hand - which row(s) is/are changed, and
- on the other hand - which values are used to overwrite the row(s).
Alternative 1
... SET set_expression [WHERE sql_cond]
Effect
After the addition SET, the changes are specified in a list of change expressions in set_expression.
The addition WHERE uses a logical expression sql_cond to define in which rows of the database table the changes are executed. For the logical expression sql_cond, the same applies as for the WHEREcondition of the statement SELECT, with the exception that no subqueries are to be evaluated in the database table to be changed. If no WHERE condition is specified, all the rows in the database table are changed. If a column of the type STRING or RAWSTRING is changed, the primary key must be fully specified in the WHERE condition.
The content of primary key fields can only be changed if the respective database table is not linked with a search help and if pool and cluster tables are not accessed. If a link was to be created through the changes and this row would cause double entries in the primary key or a unique secondary index of the database table, no row is changed and sy-subrc is set to 4.
Notes
Before release 6.10, SET could only be specified for static specification of the database table.
Before release 6.10, no dynamic logical expressions could be used in the WHERE condition of the statement UPDATE.
Example
Dynamic conversion of the content of an arbitrary column in an arbitrary database table of a previous currency in Euro.
PARAMETERS: table TYPE c LENGTH 30,
column TYPE c LENGTH 30,
old_curr TYPE sycurr.
DATA: set_expr TYPE string,
condition TYPE string.
CONCATENATE column ` = 'EUR'`
INTO set_expr.
CONCATENATE column ` = old_curr`
INTO condition.
TRY.
UPDATE (table)
SET (set_expr)
WHERE (condition).
CATCH cx_sy_dynamic_osql_error.
MESSAGE `Error in update!` TYPE 'I'.
ENDTRY.
Alternative 2
... FROM wa
Effect
If you specify a non-table-type work area wa, the system will search for a row in the database table which, in its primary key, has the same content as the respective beginning part of the work area. The content of the work area is interpreted in its non-converted form and in accordance with the structure of the database table or the view. The content of the work area is assigned to this row. The assignment takes place without conversion from the left to the right in accordance with the structure of the database table or the view. The work area must fulfill the prerequisites for use in Open SQL statements.
If there is no row with the same content for the primary key in the database or if the change would lead to a double entry in a unique secondary index, the line is not changed and sy-subrc is set to 4.
Notes
The work area wa should always be declared in relation to the database table or the view in the ABAP Dictionary.
If you have a static specification of the database table or the view, the specification of the work area using FROM wa can be omitted outside of classes - provided a table work area dbtab for the respective database table or the view is declared using the statement TABLES. The system expands the UPDATE statement implicitly to include the addition FROM dbtab.
Alternative 3
... FROM TABLE itab
Effect
When an internal table itab is specified, the system processes all the rows of the internal table in accordance with the rules for the work area wa. The row type of the internal table must meet the requirements for use in Open-SQL statements.
If, in the database, there is no row with the same content of the primary key for a row in the internal table, or if the change would lead to a double entry in a unique secondary key, the respective row is not changed and sy-subrc is set to 4. If the internal table is empty, sy-subrc is set to 0. The system field sy-dbcnt is always set to the number of rows actually inserted.
Example
Reduction of the flight cost for all of today's flights of an airline carrier in the database table SFLIGHT by the percentage percent. The calculation of the new price is always done in an internal table sflight_tab and the database table is changed accordingly.
PARAMETERS: p_carrid TYPE sflight-carrid,
percent TYPE p LENGTH 1 DECIMALS 0.
DATA sflight_tab TYPE TABLE OF sflight.
FIELD-SYMBOLS <sflight> TYPE sflight.
SELECT *
FROM sflight
INTO TABLE sflight_tab
WHERE carrid = p_carrid AND
fldate = sy-datum.
IF sy-subrc = 0.
LOOP AT sflight_tab ASSIGNING <sflight>.
<sflight>-price =
<sflight>-price * ( 1 - percent / 100 ).
ENDLOOP.
ENDIF.
UPDATE sflight FROM TABLE sflight_tab. -
Bapi : BAPI_ALM_ORDER_MAINTAIN not updating table AFVU-USR08
Hi,
I have a requirement to update table AFVU-USR08.I am actualy dealing with tcode IW32/IW33 where in we need to update operation-->enhancement tab.I am using BAPI : BAPI_ALM_ORDER_MAINTAIN to do this.I am testing the BAPI directly( Not called in any program ),I can see a message like so and so order saved under notification,But there is no entry in table AFVU-USR08.
If any one have come across this prob. and got the sol. Pl. share it with me.
Your solution will be more helpful.
Thanks,
Bharani.Hi Ferry,
1. I have also tried ur given code before BAPI_TRANSACTION_COMMIT.
l_fname = 'SOBKZ'.
l_fvalue = 'U'.
CALL FUNCTION 'CO_BH_MOD_SINGLE_FIELDS'
EXPORTING
aufnr_imp = wa_meth-objectkey(12)
field1 = l_fname
value1 = l_fvalue.
but this program is giving dump for only this particular Value saying that This is PROTECTED field.
Can anyone help me out on How to Update Special Stock Indicator on Components Tab of Maintenance Order (IW32).
If anyone has faced such type of problem & solved it then please let me also.
2. Which BADI to use for Updating Special Stock Indicator when we press enter on Components tab in Transaction IW32 ?..
Thanks in advance,
Hope to get the solution soon from all SAP gurus.
and help will be appriciated .
Gaurav. -
Creating a better update table statement
Hello,
I have the following update table statement that I would like to make more effecient. This thing is taking forever. A little background. The source table/views are not indexed and the larger of the two only has 150k records. Any ideas on making more effecient would be appreciate.
Thanks.
Ryan
Script:
DECLARE
V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
V_EID_DOE DATE;
V_EID_POE SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
V_EID_APPR_DATE DATE;
V_CASE_CIV_ID SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
V_CASE_DOE DATE;
V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
V_CASE_APPR_DATE DATE;
V_CASE_DEPART_DATE DATE;
V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
CURSOR VALID_CIV_ID_FROM_EID IS
SELECT EID.SUBJECT_KEY,
TO_DATE(EID.PROCESS_ENTRY_DATE),
EID.POINT_OF_ENTRY,
TO_DATE(EID.APPREHENSION_DATE),
DACS.CASE_EID_CIV_ID,
TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
DACS.CASE_CODE_ENTRY_PLACE,
TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
DACS.SBI_UPDATE_STEP,
DACS.SBI_CIV_ID
FROM SBI_EID_W_VALID_ANUM_V EID,
SBI_DACS_CASE_RECORDS DACS
WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
BEGIN
OPEN VALID_CIV_ID_FROM_EID;
SAVEPOINT A;
LOOP
FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE, V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
DBMS_OUTPUT.PUT_LINE('BEFORE');
EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
DBMS_OUTPUT.PUT_LINE('AFTER');
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
WHERE V_CASE_CIV_ID IS NOT NULL
AND V_CASE_CIV_ID <> 0;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE
AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE <> V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_POE = V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
WHERE V_SBI_UPDATE_STEP = 0
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
END LOOP;
CLOSE VALID_CIV_ID_FROM_EID;
COMMIT;
END;
-----Thats it. Thanks for your help.
RyanPlease use [ code] or [ pre] tags to format code before posing:
DECLARE
V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
V_EID_DOE DATE;
V_EID_POE SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
V_EID_APPR_DATE DATE;
V_CASE_CIV_ID SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
V_CASE_DOE DATE;
V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
V_CASE_APPR_DATE DATE;
V_CASE_DEPART_DATE DATE;
V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
CURSOR VALID_CIV_ID_FROM_EID IS
SELECT EID.SUBJECT_KEY,
TO_DATE(EID.PROCESS_ENTRY_DATE),
EID.POINT_OF_ENTRY,
TO_DATE(EID.APPREHENSION_DATE),
DACS.CASE_EID_CIV_ID,
TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
DACS.CASE_CODE_ENTRY_PLACE,
TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
DACS.SBI_UPDATE_STEP,
DACS.SBI_CIV_ID
FROM SBI_EID_W_VALID_ANUM_V EID,
SBI_DACS_CASE_RECORDS DACS
WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
BEGIN
OPEN VALID_CIV_ID_FROM_EID;
SAVEPOINT A;
LOOP
FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE,
V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,
V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
DBMS_OUTPUT.PUT_LINE('BEFORE');
EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
DBMS_OUTPUT.PUT_LINE('AFTER');
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
WHERE V_CASE_CIV_ID IS NOT NULL
AND V_CASE_CIV_ID <> 0;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE
AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE <> V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_POE = V_CASE_POE
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
AND V_EID_POE = V_CASE_POE;
UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
WHERE V_SBI_UPDATE_STEP = 0
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
END LOOP;
CLOSE VALID_CIV_ID_FROM_EID;
COMMIT;
END;Peter D. -
Guys,
I need to update table A columns col3, col4, col5 and col6 by table b columns col3, col4, col5 and col6 however table b col5 and col6 values need to come from table c col1.
Means table b col5 and col6 have values in it however i need to replace them with value from table c col1 and need to update table a col5 and col6 accordingly.
table a and table b has col1 and col2 in common.
i am trying something like this.
Update a
a.col3 = b.col3,
a.col4 = b.col4,
a.col5 = (select col1 from table_c c where c.col2=b.col5),
a.col6 = (select col1 from table_c c where c.col2=b.col6)
from table_A a inner join table_b
on a.col1=b.col1 and a.col2=b.col2
can someone help me reframe above update query?
thanks in advance for your help.Try the below:(If you have multiple values, then you may need to use TOP 1 as commented code in the below script)
create Table tableA(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableA values(1,2,3,4,5,6)
create Table tableB(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableB values(1,2,30,40,50,60)
create Table tableC(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableC values(100,50,30,40,2,2)
--Insert into tableC values(200,50,30,40,2,2)
Insert into tableC values(100,60,30,40,2,2)
Select * From tablea
Update a Set
a.col3 = b.col3,
a.col4 = b.col4,
a.col5 = (select col1 from tablec c where c.col2=b.col5 ),
a.col6 = (select col1 from tablec c where c.col2=b.col6 )
from tableA a inner join tableb b
on a.col1=b.col1 and a.col2=b.col2
--Update a Set
--a.col3 = b.col3,
--a.col4 = b.col4,
--a.col5 = (select Top 1 col1 from tablec c where c.col2=b.col5 Order by c.Col1 asc),
--a.col6 = (select Top 1 col1 from tablec c where c.col2=b.col6 Order by c.Col1 asc)
--from tableA a inner join tableb b
--on a.col1=b.col1 and a.col2=b.col2
Select * From tablea
Drop table tablea,Tableb,TableC -
We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
Code: 0x80004005
Source: xxxxxxxx SSIS.Pipeline
Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
Code: 0xC0202009
Source: Process xxxxxx Load TableName [48]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
Code: 0xC020901C
Source: Process xxxxxxxx Load TableName [48]
Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
In LO Delta scenario, Data posted parallel into document tables and update tables. What are the Document tables? What are the Update tables?
Give example for Application 11, which is document tables, and update tables?Hello Mannev,
Document tables are the actual application tables where the data is posted when you post a document in R/3.
Examples can be MSEG, VBRK etc.
Update tables are the intermediate tables which store data read from document tables. The V3 runs collects deltas in form of LUWs from these update tables and populates the delta queues.
hope this helps..
thanks, -
How to get the column names of the table into the Dashboard prompt
how to get the column names of the table into the Dashboard prompt
Thanks & Regards
Kishore PHey john,
My requirement is as follows
I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
My pivot table looks like this
COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
---------------------------------------------------- JAN 2009 FEB 2009 MAR 2009
RANK REGION DOLLARS DOLLARS DOLLARS DOLLARS
1 CENTRAL 10 20 30 40
2 SOUTHERN 10 30 30 70
3 EASTERN 20 20 20 60
4 WESTERN 10 20 30 40
When i select the District in column selector
Report has to display rank based on Total Sales by District. i.e
------------------------------------------------- JAN 2009 FEB 2009 MAR 2009
RANK DISTRICT DOLLARS DOLLARS DOLLARS DOLLARS
for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
do you have any solution for this?
http://rapidshare.com/files/402337112/Presentation1.jpg.html
Thanks & Regards
Edited by: Kishore P on Jun 24, 2010 7:24 PM
Edited by: Kishore P on Jun 24, 2010 7:28 PM -
How to map XML File input to VO (eventually to update table) upon fileupld
Reqirement: I am downloading an XML File (basically name-value pair) from user using OAMessageFileUploadBean. I need to take this file and update to an existing record in the table (cs_incidents_all). XML File schema is well-known in advance.
Approach: Don't know what is the best, but I'm thinking if there is an OAF way to map the XML File (Blobdomain) to VO and get the rowIMPL.getColumn1Value to fetch all the datavalues then loop thru all the columns (xml-tags) and finally call plsql APIs which will update/insert into table (cs_incidents_all)
Is this possible in OAF? If so please shed some light as to how to map XML File to VO.
If this is not possible then please let me know the other way. I have to do this inside the oaf.
Thank you,Can someone please let me know if this is possible in OAF?
-
hi friends,
i have one table in my application. i will update cells by enetering data into it. here the problem is after i typed digits i need to press
ENTER or i need to press TAB to update the entered value into table cell. is there any way that without pressing ENTER or TAB to update table cell. and also i need to restrict max number of digits to 2. how can i do that. please help me in this proble. due to this a lot of bugs are coming for me.
thanks and regard
sriramhi sriram,
Hope u might have implemented the key listener while typing if the in put key value of that cell is >2 put ,e.consume() will work out and further ur second query to update automatic is little bit odd any way u can do by fiering tableChangedListener in key pressed event .
if u want brief help contact [email protected] -
What's up when you drag and drop a table into a jsp page?
Hi All,
I was wondering what's happen in dragging and drop a table into a jsp page. This question because untill yesterday i had an application up and running, with a table displaying a number of rows of the database, and an action associated with an update into a database.
The action is managed trough JNDI, defined from Preference-Embedded.......
It was working.
Then the machine hosting the db changed IP addres. I went into Webcenter Administration console, I've changed the connection string into the jdbc parameters, by updating the new IP address... but it's not working anymore! The log comes out with a big error, but basically it can't connect at the db!
So, I think there is somewhere some reference to the old db.....where???
Thanks
ClaudioYes Shay,
I got this error:
JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
in few hours I'll be able to give you the full stack.
Thanks
Clauido
Message was edited by:
user637862
Hi Shay,
Thanks a lot..you were right.
I've located the ba4j on the webcenter server...and I've noticed that it was with the old address.
I think it's a bug, cause on the local machine (before to deploy) this file comes with the right address.
So next time, before to redeploy a new application, I think I'm going to fiscally delete the folder from j2ee folder.
Thanks again for the help!
Claudio -
Update table using merge or Update statement
Hi All,
We have oracle 10G R2 On windows...
We have tables BROK_DEALER_MAP and DTRMIS_REPORT.
create table BROK_DEALER_MAP
SL_NO NUMBER,
BROK_DLR_CODE VARCHAR2(30),
EMP_TAG VARCHAR2(30),
REMARKS VARCHAR2(60),
CONS_CODE VARCHAR2(30),
BROK_DLR_NAME VARCHAR2(50),
BROKER_TYPE VARCHAR2(30),
BROK_DLR_0 VARCHAR2(30),
CATG_DESC VARCHAR2(60),
Category VARCHAR2(30));
desc DTRMIS_REPORT
SL_NO
POSTED_DATE
ZONE
AMC_REGION
CITY
BROK_DLR_CODE
BROK_DLR_NAME
SUB_BROKER
B_TYPE
FOLIO_NO
INVESTOR_NAME
TAX_NO
INV_TAG
SCHEME_CODE
SCHEME_NAME
SCH_CLASS
TRXN_MODE
CHN_TAG
FP_COUNT
FP_AMOUNT
AP_COUNT
AP_AMOUNT
PUR_COUNT
PUR_AMOUNT
SIP_COUNT
SIP_AMOUNT
SI_COUNT
SI_AMOUNT
RED_COUNT
RED_AMOUNT
SO_COUNT
SO_AMOUNT
DR_COUNT
DR_AMOUNT
STP_COUNT
STP_AMOUNT
NET_SALES
DISTRIBUTOR_TYPE
SCHEME_TYPE
FOCUS_PRODUCT
RM_CODE
RM_NAMEtable BROK_DEALER_MAP doesn't have any duplicate records.
table DTRMIS_REPORT have more than 2 lacks duplicate records.
Now i want to update table DTRMIS_REPORT (DISTRIBUTOR_TYPY COLUMN) With the values of BROK_DEALER_MAP (CATEGORY COLUMN).
For that i have written merge statement like below
merge into dtrmis_report a
using brok_dealer_map b
on (a.brok_dlr_code=b.cons_code)
when matched then
update set a.Distributor_type=b.category
where a.brok_dlr_code=b.cons_code;IT's giving error saying ORA-30926: unable to get a stable set of rows in the source tables.
How to update the table.
Please help.Chanchal Wankhade wrote:
IT's giving error saying ORA-30926: unable to get a stable set of rows in the source tables.That means there are duplicate records in your source table.
Please post the output of the below
select cons_code
from brok_dealer_map
group by cons_code
having count(*) > 1;In case of duplicate CONS_CODE, you need to decide with which the target table should get updated
And are you seriously giving a where condition in merge like you posted..?
Edited by: jeneesh on Dec 19, 2012 9:56 AM -
Automatically updating table column in OBIEE
Hi folks,
I have a requirement for say i have to update a table column based on a condition, but this update should happen on daily basis (i mean it should be scheduled once daily) by checking if any records in that column meets the condition then update it
example :- column='Pending' then update it with 'Approved' . As transactions records comes on daily into the table.OBIEE should check and update the row so next time it doesnt show this row as 'Pending' .
I have thought of 2 approaches for this
1) Through writeback it is possible to update but manually ( the issue is it cant be automated or scheduled on daily basis and update multiple records on a go)
2) Writing a stored procedure or function for update, but how can i accomplish this procedure to be scheduled or run once daily.how to use it?
Any thoughts on the above two points or any method you guys can think off.
Any help is appreciated !
Cheers,
KKKranthi,
This shud be easy...
- Create a direct database request...with Update Statement
eg: Update table set col = 'Approved' where col = 'Pending'
- Create an ibot using the above DDR and schedule it on daily basis.
This will update the full table with new value on daily basis based on the condition
Maybe you are looking for
-
I've reset and even added the missing letter to my apple I'd in the request for password box, but it seems to have reverted to what it was before. I can't update or download anything as even though my password is right, it doesn't match the I'd so is
-
Unable to insert table in design view???
Im using Dreamweaver MX 6.0, been using it for a while trouble free. Recently installed it on my new Vista laptop, install went fine, program opens fine. I was in design view today, tried to insert a table and was initially getting some weird error m
-
Flagging Word documents with Java???
Hi everyone! We are currently designing an Intranet architecture in J2EE and are looking for a solution to the following problem: We are going to create a Word template which all users submitting a document must use in order for this to be accepted.
-
How to release the task and Transport
Hi can anybody tell me the steps , how to release the task and how to relase the Transport into Quality. Thanks in advance. kp
-
Problems with Firefox 5.0.1 website layouts in Lion
After I downloaded Lion, I ran Firefox 5.0.1. Immediately, I noticed significant layout problems in CNN.com and MSNBC.com. And on Facebook, the friends, message, and notification icons at the upper left didn't work. Nor did entering comments to Faceb