Update the profile values at responsiblity level from backend
HI Team ,
Find sql for Updating the profile values at responbility level from backend?
Thanks,
Chandu
Please also see:
How to Change Profile Option Value Without Forms? (Doc ID 943710.1)
APPS.FND_PROFILE
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_PROFILE&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_PROFILE&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein
Similar Messages
-
Profile option update at responsibility level from backend
Hi,
I referred few online and oracle support document to update the profile option from backend. I was able to change the profile option at site level, but when I am trying to update the profile at responsibility ( or any level such as user etc), I am unable to do so. Though the script says that profile option has been updated, it doesn't show up when I check on frontend.
EBS 11.5.10.2
DB 11.2.0.1
The script which I use to change profile at site level is this:-
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('SITENAME', 'ABDVLP', 'SITE');
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
I tweaked the above script to include the responsibility level change, but its not changing. Both the below scripts are not making any changes.
SCRIPT - 1
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('ICX_DISCOVERER_LAUNCHER', 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]', 'RESP',51889,671);
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
Note: I found the responsibility id from the below query
SELECT responsibility_id ,application_id
FROM fnd_responsibility_tl
WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
===============================================================================
SCRIPT-2
DECLARE
stat BOOLEAN;
resp_id NUMBER;
appl_id NUMBER;
resp_appl_id NUMBER;
BEGIN
DBMS_OUTPUT.DISABLE;
DBMS_OUTPUT.ENABLE (100000);
-- Set the Profile Option value at responsibility level
SELECT responsibility_id, application_id
INTO resp_id, resp_appl_id
FROM fnd_responsibility_tl
WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
stat :=
fnd_profile.SAVE
(x_name => 'ICX_DISCOVERER_LAUNCHER', -- Profile name you are setting
x_value => 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]', -- Profile value you are setting
x_level_name => 'RESP', -- Level that you're setting at: 'SITE','APPL','RESP','USER', etc.
x_level_value => resp_id, -- Default NULL Level value that you are setting at, e.g. user id for 'USER' level. X_LEVEL_VALUE is not used at site level.
x_level_value_app_id => resp_appl_id, -- Default NULL. Used for 'RESP' and 'SERVRESP' level; Resp Application_Id.
x_level_value2 => NULL -- 2nd Level value that you are setting at. This is for the 'SERVRESP' hierarchy.
IF stat
THEN
DBMS_OUTPUT.put_line ('Stat = TRUE - profile updated');
ELSE
DBMS_OUTPUT.put_line ('Stat = FALSE - profile NOT updated');
END IF;
COMMIT;
END;I tried to change at SERV level and still the profile never gets updated. Kindly help.
-
How to change the profile value in the pl/sql code without making change in the database
How to change the profile value in the pl/sql code without making change in the database.
I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done. -
How to create a profile value at user level programatically
Dear all,
I want to create a profile value at user level programatically, I refer to the developer guide and try to use fnd_profile.put() to create a new value.
But I find out the value is just created in session level, not be inserted into base table.
So is there anyone know how to realize this function in PL/SQL?
Any idea is appreciated.
Best Regards,
KennyCheck Note: 364503.1 - How to Set a System Profile Value Without Logging in to the Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364503.1 -
Revision: 20609
Revision: 20609
Author: [email protected]
Date: 2011-03-04 10:23:41 -0800 (Fri, 04 Mar 2011)
Log Message:
Change the default max object nest level from 1024 to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Update documentation for the max object nest level setting to reflect the new default.
Add documentation for the new max collection nest level setting.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/trunk/resources/config/services-config.xmlYou should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package. -
How to update the table value in the valuechange event?
I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
item.setCost(max_cost);
item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.
-
Error while updating the forecast value in M.Master through RMDATIND
Hi All
Good Day
In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
Actually there are 2 fields exists for tracking limit in structure bmmh1
1.SIGGR and
2.SIGG2
I had given the input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
Can anyone please help me in this case.
Thanks in advance.
Cheers
Vallabhanenidebug your program.
Compare the field content of the value in the field you submitted with the content in field that is checked when message M3 456 is issued. -
Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank youMy programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi -
Problem while updating the forecast value in m.master by direct input menth
Hi All
Good Day
I am updating the forecast value in material master by direct input method.
my program is working fine when I am running it online.
but when i am runnig in back ground I am getting one error which is mentioned below
Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated BD 078 E
Please anyone can help ne in above case.
Thanks in advance.
Cheers
VallabhaneniHi Hakim
How are you
Thanks for your valuable suggestion.
I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
Can you please help me in the above case.
In Bmv0 transaction first I defined the job and in program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
Alomost it ran for 27 hours and then it has given the message background job terminated.
Job log entries are as follows.
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040840; material number SUJ82J8400; error gravity E
22.12.2008 11:19:46 Transaction 0000040840: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040841; material number SUJ84G3001; error gravity E
22.12.2008 11:19:46 Transaction 0000040841: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040842; material number SUJ84G3002; error gravity E
22.12.2008 11:19:46 Transaction 0000040842: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040843; material number SUJ86G0100; error gravity E
22.12.2008 11:19:46 Transaction 0000040843: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040844; material number SUJ86G0300; error gravity E
22.12.2008 11:19:46 Transaction 0000040844: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040845; material number SUJ86G0900; error gravity E
22.12.2008 11:19:46 Transaction 0000040845: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040846; material number SUJ86G9600; error gravity E
22.12.2008 11:19:46 Transaction 0000040846: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040847; material number SUJ86G9601; error gravity E
22.12.2008 11:19:46 Transaction 0000040847: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040848; material number SUJ86J0000; error gravity E
22.12.2008 11:19:46 Transaction 0000040848: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:20:54 Transaction 0000040848 completed Mat. no. No. of log. errors 0000040848
22.12.2008 11:21:30 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
22.12.2008 11:21:30 Job cancelled
I know it has taken long time to process the job because of I changed the transactions per commit unit (500 to 999999) it kills the system
But I am supposed to provide some number < 999999 in transactions per commit unit
actually I haven't tried like I said above < 999999 because i don't have any hopes.
Please look at this problem and help me in this case.
Thanks in advance.
Vallabhaneni -
Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?. I need the actual default value for a particualr preference.
About:config does show some default values but I need the source from which about:config picks up the default value.
Any help in this direction is greatly appreciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)The prefs that aren't hidden if they are the default are stored in two JavaScript text files in the Firefox program folder
You can open them via these links in a Firefox tab:
<code>resource:///defaults/pref/firefox.js
resource:///greprefs/all.js
</code>
([/forum/1/702598]) -
Revision: 20928
Revision: 20928
Author: [email protected]
Date: 2011-03-21 07:02:01 -0700 (Mon, 21 Mar 2011)
Log Message:
Needed to change maxObjectNestLevel in SerializationContext.java to 512 to change the default max object nest level from 1024 to 512.
Modified Paths:
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.javaHi Diego,
i have a question.
i know that we need SRM 4.0 installation on WAS and ITS to be installed.
my question to you is....
do we need to install EBP separately if we have already installed SRM 4.0 ( in other words is EBP part of SRM 4.0 installation or is it separate)
and for ITS i am running WAS 6.4 and i know that ITS is an integral part of it so how do we activate ITS for SRM 4.0
Thanks a lot in advance
Harish -
Updating the characterstic values in the classification view
Hi,
We are trying to update the characterstic values in the material master through AUSP table (BDC program). We want to replace the old values with the new values. But the program is appending the new characterstic values to the old values. This is happening inspite of the configuration setting in the characterstic transaction (CT04) such that it allows only a single value. Please suggest us in this regard.
Thanks
Ramakanthuse the following
Set and Change Values
Use
You can use this function as an easy way to change, delete, or create large quantities of assigned characteristic values. Target objects can be classified, or existing assignments can be deleted.
Prerequisites
The selected target objects must have the same class type and object type as the template object.
The characteristics must be the same for the target objects and template object.
No interval values are processed. No reference characteristics are processed.
Procedure
Enter a class type. If the class type is for multiple object types, you see a list of the object types that you can select. Select an object type.
Enter the characteristics whose values you want to change or set. To find characteristics, display the possible entries. To display all the characteristics of a class, choose Chars of class and enter the class.
Characteristics: Old and New Values
You can replace old values with new values. You can set completely new values if no value was assigned before, or delete old values.
Use the possible entries to select values.
You can only select one value for each line. If you want to process several values, you must select the same characteristic several times.
Changing Values with an Operator
If a characteristic has numeric format, you can use an operator to recalculate values. You can add, subtract, multiply, and divide figures. For character format, the operator fields are grayed out.
On the Target objs tab, enter the objects to which you want to copy the new values.
For more details on this procedure, a description of further functions, and information on the log, see the third and fourth steps in Copy Values Assigned to Object.
On the Assignments tab, you can classify the target objects or delete existing assignments. Enter the class or select one using the possible entries. You can go to class management by choosing Display class.
Choose Carry out a mass change. -
Updating the characterstic values
Hi,
We are trying to update the characterstic values in the material master through AUSP table (BDC program). We want to replace the old values with the new values. But the program is appending the new characterstic values to the old values. This is happening inspite of the configuration setting in the characterstic transaction (CT04) such that it allows only a single value. Please suggest us in this regard.
Thanks
RamakanthHi,
We are not using BAPI.
We are using recording the transaction in MM02.
Regards
Ramakanth -
How do I update the ios on an iphone 4 from versioon 4.2.8 to the most recent?
Plug your phone to your PC - open itunes - itunes should automatically see that your phone needs an upgrade.
Make sure you backup prior to updating.
YOu may also need to update your itunes. -
Update the firmware on my airport express from 7.4.2 to 7.5.2
When I press update the firmware on my airport express from 7.4.2 to 7.5.2 using the airport tool says:
This device and its network service is temporarily unavailable. will you continue?
When I press deliberately and pressed into the code goes started to download the update, but come quickly with this message:
Airport Utility could not find the AirPort wireless device after restarting. You may need to select your network manage network connections and try again.
But my airport lights up green as if it works and I may well be on the net and listen wireless music.
How do I get updated firmware?Chances are, the update was downloaded and installed successfully.
Try powering down your entire network....every device.....order is not important
Wait a few minutes
Start the modem first and let it run for 2-3 minutes by itself
Start the next device connected to the modem the same way
Continue starting devices one at a time about a minute apart until everything is powered back up
What happens?
Maybe you are looking for
-
Error while running J2ME program in KtoolKit
hi, i am doing my project in j2me as i m developing a Jabber client .where my Client application has to connect jabber server through GPRS... so while running the project in KToolKt it ask that client application wants to send the information this re
-
Layered image with blending mode won't display properly in Indesign CS3
Hello, I'm having trouble placing a layered psd and/or tiff with blending modes into my indesign cs3 document. Basically I have a flattened image with a shadow on a white background. I've had to doctor the image a bit in photoshop and I've used the m
-
Doubt in Termination Rules in Benefits Module
Hi Experts. I Have given termination variant as End Of Month.When System ask the date of month i have given as 30 th.How the system takes when the month is February which the last date is 28 th.Some months are having days upto 31 st.How the system re
-
Make Brush preset doesn't match canvas angle
Hello! I'm running a demo version of Photoshop Cs 5 on my brand spanking new Macbook pro 2.3 ghz with 8gb of ramalama. I work on comics and I create a lot of preset brushes as I go, using an action script. I'll draw a path, and the script witll fill
-
Huge iMovie Project file to big to do anythin with
I imported my first movie clips from 2 super 8 video cassettes. Total run time 130 minutes. This created an iMovie file that is 26.65 GB large. Now I can't burn it to DVD or import it into iDVD. Too big. Why did this import to iMovie so large? Direct