Update to 10.9.1 whips out Server and Apple Configurator Settings

I just updated my mac Mini Server that was already running Mavericks and Server App. When the reboot was done and I started the server is was like I had just installed the app. All the cache and settings were gone. Went to use Apple Configurator. Same thing. All profiles and managed devices and groups are gone. Is there anyway to get these configurations back?

Actually, this is an id10T mistake. I rebooted to the wrong hard drive. Please disregard this problem. It is solved.

Similar Messages

Recently updated MBP and Apple Configurator. Since updating the Update iOS option for Apple Configurator forces me to update the iOS. Thoughts?

I have a MacBook Pro (Retina, 15-inch, Late 2013)
Processor: 2.3 Ghz Intel Core i7
Memory: 8 GB 1600 MHz DDR3
Graphics: Intel Iris Pro 1536 MB
OS: OS X Yosemite Version 10.10.1
Apple Configurator
Version 1.7.1 (550)
Since upgrading both the OS and Apple Configurator I can no longer select the option to not update the iOS when I prepare a device. It is currently selected as When update is available. Also the option appears to be grayed out. Any thoughts?

Google maps is now available in the app store and the carrier update that your refering to was for cell data usage while on wifi. It is perfectly fine to do the update. No issues that i had from that update.

TS1363 hi have tried to update my iphone now has locked out with the apple sign on the front and wont switch off

hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off

See here - http://support.apple.com/kb/TS3694#error1603

Windows Home Server and Apple TV 2

There are some old threads talking about Windows Home Server and the original Apple TV - the HP Windows Home Servers actually have excellent Mac support and out of the box with the Twonky Media Server that is bundled with the HP WIndows Home Servers would stream to the original Apple TV with no issue.
The wrinkle is the Apple TV 2 requires Home Sharing. I'm not going to debate good/bad - it is what it is. I was searching for a way to get my WHS working with my Apple TV 2 since I'm finally getting around to automating the transcoding of my Tivo files and I would much rather my WHS be my media server than my Mac. I came across this article that seems perfectly reasonable:
http://forum.wegotserved.com/index.php/topic/16359-whs-and-apple-tv-v2/
I haven't tried it yet, but it seems perfectly reasonable. Has anyone else tried it? I'll report back either way - if I remember to

"But can it be both simultaneously?
Both a server and a media machine that is showing a movie on your TV?"
Yes it can, no problems.
The Mini Server OSX is pretty much the same as the client Snow Leopard, complete with Front Row, iTunes, Mail, Safari etc, but no iLife09 supplied - you will have to pay extra for that.
It will do everything that Snow Leopard will do but has all the server capabilities too if you know how to set it up/use the software.
The only things I had trouble with was I can't find Migration Assistant and a strange quirk is that it won't share a USB connected printer across a network! No sign of printer sharing in System prefs but I guess you can do it via the Server config somewhere...
I just used CUPS to enable Bonjour printer sharing - works fine
I have been able to insatll everything I had on my previous CoreDuo Mini including Final Cut Express, iLife09, EyeTV, some bit torrent stuff - all works fine...
I really like the fact that I can plug two monitors in - I have the MiniDVI connected to a 50" plasma and 1080p Projector (using an HDMI splitter), the Mini Display port feeds a separate 20" widescreen monitor - when the plasma/PJ is switched off the main display automatically switches back to the 20" monitor
All in all this MiniServer is a great little HTPC - powerful and silent with 1TB of storage. The Server software is a bonus I haven't even looked at as yet

Mail server and DNS configuration

I have an XServe G4 running Mac OS X 10.4 Tiger Server, and I have successfully configured two domains that I purchased from GoDaddy as websites on this XServe. It's behind an Airport Extreme, and I have forwarded a bunch of ports in order to enable FTP, SSH, Web, remote Server Administration, webmail, and I have also forwarded the IMAP and SMTP ports. All of these services work except for email, so I am wondering if there is any special DNS settings that I need to configure in the GoDaddy total dns configuration page. I have the MX record pointed directly to my IP, just like the A record. I also have mail.mydomain.com pointed to the A record's IP (maybe I described that poorly, but I hope it gets the point across). I am able to log into webmail and send email out to other people, but when I try replying back to the email which I sent from webmail, I get a bounced message. I also cannot configure a Mail client, but I think I need to get the accounts at least working first. Can someone provide a list of DNS requirements or server configuration requirements for me to check off in order to make this happen? Does anyone know of any great resources to learn this kind of stuff? I'm kinda new to the server thing.
Thanks!
Paul

postconf -n results:
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
html_directory = no
inet_interfaces = localhost
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,rubenkalath.com
mydomain = rubenkalath.com
mydomain_fallback = localhost
myhostname = mail.rubenkalath.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
ps U _postfix results:
ps: _postfix: no such user
tail -20 /var/log/mail.log results:
May 15 15:55:27 sincity postfix/cleanup[1257]: 765DC4517A: message-id=<[email protected]>
May 15 15:55:27 sincity postfix/qmgr[1239]: 765DC4517A: from=<[email protected]>, size=881, nrcpt=1 (queue active)
May 15 15:55:27 sincity postfix/smtpd[1254]: disconnect from localhost[127.0.0.1]
May 15 15:55:27 sincity postfix/pipe[1259]: 765DC4517A: to=<[email protected]>, relay=cyrus, delay=0, status=sent (mail.rubenkalath.com)
May 15 15:55:27 sincity postfix/qmgr[1239]: 765DC4517A: removed
May 15 15:58:09 sincity postfix/smtpd[1338]: connect from localhost[127.0.0.1]
May 15 15:58:13 sincity postfix/smtpd[1338]: lost connection after CONNECT from localhost[127.0.0.1]
May 15 15:58:13 sincity postfix/smtpd[1338]: disconnect from localhost[127.0.0.1]
May 15 16:06:09 sincity postfix/postfix-script: refreshing the Postfix mail system
May 15 16:06:09 sincity postfix/master[590]: reload configuration
May 15 16:12:48 sincity postfix/smtpd[1709]: connect from localhost[127.0.0.1]
May 15 16:12:54 sincity postfix/smtpd[1709]: lost connection after CONNECT from localhost[127.0.0.1]
May 15 16:12:54 sincity postfix/smtpd[1709]: disconnect from localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/smtpd[2068]: connect from localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/smtpd[2068]: 1FA354537C: client=localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/cleanup[2071]: 1FA354537C: message-id=<[email protected]>
May 15 16:28:58 sincity postfix/qmgr[1530]: 1FA354537C: from=<[email protected]>, size=776, nrcpt=1 (queue active)
May 15 16:28:58 sincity postfix/smtpd[2068]: disconnect from localhost[127.0.0.1]
May 15 16:29:02 sincity postfix/smtp[2072]: 1FA354537C: to=<[email protected]>, relay=mercury.gatech.edu[130.207.192.26], delay=4, status=sent (250 Ok: queued as 67542CDF86)

WSUS server and client configuration issues

I just inherited WSUS from my predecessor (it was turned off because of a full disk) so I’m still learning how to use it. Turning it back on I changed where updates should come from, they were stored locally and now I’m pulling them down off of the Microsoft
Update location. What I’m seeing is that I have a bunch of computers that WSUS “sees” but are showing “Failed or Needed” status. Unless I visit each machine and manually do the updates this status does not change. Additionally I have some client computers
(Windows 7) that are not showing up as managed by WSUS. If I reading this right I’m running version Update Services 6.2.9200.16384 on Management Console 3.0 Version 6.2 (build 9200) on Windows Server 2012.
How can I force WSUS to automatically update the “Failed and Needed” devices?
How can I get those clients that are not being managed by WSUS to be managed?
Some of the things that I have done so far on the server and clients are:
Create a GPO (see attached for WSUS)
wuauclt
/detectnow
wuauclt /reportnow
wuauclt.exe /detectnow
gpupdate /force after
modifying the GPO
I even ran the SolarWinds WSUS diagnostic (as a non-administrator) and got this as the output:
# Solarwinds® Diagnostic Tool for the WSUS Agent # 1/23/2015
Machine state
User rights: User does not have administrative rights (Administrator rights are not available)
Update service status: Running
Background Intelligent Transfer service status:
Running
OS Version: Windows 8.1 Pro
Windows update agent version:   7.9.9600.17489 (WU Agent is OK)
Windows Update Agent configuration settings
Automatic Update:    Enabled
Options: Automatically download and notify of installation
Use WSUS Server: Not found (There is no such key)
Windows Update Server: Not found (There is no such key)
Windows Update Status Server: Not found (There is no such key)
WSUS URLs are identical: Values are empty
WSUS Server Connectivity -- Connectivity check is impossible
So, my questions are:
What tool do I use to configure the client machine?
How do I get WSUS to update my clients?
Thanks
Sam

Steven,
I'm pretty sure that this is not the right forum to discuss this in but just so we can close this case.
On my computer I ran the command gpupdate /force I
then rebooted my computer to make sure that the group policy would be updated. The first screen shot is from my domain controller and the second is from my computer. As you can see the Domain Controller has the correct settings but the local machine doesn't.
Other parts of the DC GPO settings have worked so I'm somewhat comfortable that it is being propagated properly.

Unable to check out Ipad in Apple Configurator

I am experiencing an error code when I try to check out an Ipad in Configurator "unable to change user". I am able to supervise and install apps. However when I go to check out the Ipad, the error description states it is unable to load the PDF documents into Adobe reader because the app is not present. The app is present however and I can access with not issues. Any help would be appreciated.

Have you seen this thread:
Apple Configurator "unable to change user"

Mac Mini substitutes home server and apple tv?

I have a HP mediasmart home server to manage backups, remote access and such. As well as I have an Apple TV where i store my pictures, movies, music etc.
I wonder if the mac mini (+server) will be a good substitute for all that functionality?
http://www.hp.com/united-states/campaigns/mediasmart-server/

"But can it be both simultaneously?
Both a server and a media machine that is showing a movie on your TV?"
Yes it can, no problems.
The Mini Server OSX is pretty much the same as the client Snow Leopard, complete with Front Row, iTunes, Mail, Safari etc, but no iLife09 supplied - you will have to pay extra for that.
It will do everything that Snow Leopard will do but has all the server capabilities too if you know how to set it up/use the software.
The only things I had trouble with was I can't find Migration Assistant and a strange quirk is that it won't share a USB connected printer across a network! No sign of printer sharing in System prefs but I guess you can do it via the Server config somewhere...
I just used CUPS to enable Bonjour printer sharing - works fine
I have been able to insatll everything I had on my previous CoreDuo Mini including Final Cut Express, iLife09, EyeTV, some bit torrent stuff - all works fine...
I really like the fact that I can plug two monitors in - I have the MiniDVI connected to a 50" plasma and 1080p Projector (using an HDMI splitter), the Mini Display port feeds a separate 20" widescreen monitor - when the plasma/PJ is switched off the main display automatically switches back to the 20" monitor
All in all this MiniServer is a great little HTPC - powerful and silent with 1TB of storage. The Server software is a bonus I haven't even looked at as yet

IPhone 6 Plus 128 Availability Updates (will be updating as I continue making contact with Verizon and Apple retailers)

I figure I would compile a list of things I have heard from Verizon reps as well as Apple retailers for anyone curious
First Contact: Verizon Wireless Preorder 9/12 for 6+ 128 Space Gray made at 12:17am PST at full-retail. Small chat with representative about placing order. "Deliver By: 9/19" throughout ordering and on confirmation page. Email confirmation 1:52am, with delivery date changed to 10/7.
Second Contact: Online Chat with Verizon rep about order. Verizon rep confirms nothing more than what the email stated, and what the "Status Update" on the VZW Website provides (an infinite "your order is processing, no shipping date available").
Third Contact: Direct message to Verizon rep. Also completely useless. Does not provide any more information regards shipment.
Fourth Contact: Call up Verizon Customer Service. Woman reiterates shipment date, but also adds that my order processed at 1:52am - the same time my email confirmation was sent. So 2+2 means that whenever confirmation emails are received is when your order is processed.
Fifth Contact: Call up Verizon Customer Service again. Ask more about my shipment and why it would be that others who placed their orders for the exact copy of my phone after me, received tracking numbers before me. Was told that it depends on which warehouse your order was sent to. Some warehouses have more of certain phones than others. Ask what the random number for my order location translated to geographically (city, state) and was told that as part of a non-disclosure agreement that information cannot be released.
Sixth Contact: Call up local Verizon Wireless Retail Location. Representative states that 6+ 128 models will not be available in store at all for 9/19. Suggests that perhaps Best Buy will have the phone in stock on release day.
Seventh Contact: Call up Best Buy and manager was kind enough to explain that pre-orders made through Best Buy are actually pulling from the inventory from the store. Also explains that 6+ models are not even able to be pre-ordered because of lack of supply via Apple and therefore will not be in store locations at all.
Eighth Contact: Call up different Verizon Wireless Retail Location. Representative explains that in-store locations will not know which models will be available in-store until the night before, because the shipments have not been made yet, much less fulfilled.
Ninth Contact: Call up ANOTHER Vzw Retail Location. This was the most helpful representative of all. This rep explains that no matter WHAT kind of shipment the corporate stores receive, these phones are reserved for people who upgrade/add a new line/etc, and will not be sold to people who opt for the month-to-month option for full retail.
Tenth Contact: Call up another Best Buy location. Rep doesn't know much of anything.
Eleventh Contact: Call up Apple Store located inside of a mall (because I cannot feasibly wait in a line overnight; I have twin 18mos old sons, so an in-mall location seems like my best option). Rep does not know what mall procedure will be as far as lining up. Does not know quantity of phones coming, but does know that EVERY model will be available for purchase at first-come-first-serve.
Twelfth Contact: Call up another in-mall Apple Store location. No lines inside of mall (duh), and nearest entrance door will be opened prior to mall hours at 8am. All models will be available for purchase in store in unknown quantities. Check out process takes 15-20 minutes, including transfer of all information from one phone to the new phone. If I do not want to wait in line in store, I can call the store location and make my order over the phone at 8am and pick it up in store later that day with my confirmation number and ID.
So that's that then. I plan to try and get my hands on a phone this Friday by going to an indoor Apple location, and if I am successful I will be cancelling my Verizon order regardless if I get a tracking number by then or not (although I doubt I will). I know that most VZW Reps are responding from prompts, but you think that the prompts would provide the same response for the same questions, or even that Verizon would have come out with an official statement regards this whole mess. I guess that's asking for too much, though.
What's everybody else's plans and experiences? Inspired or made aware of anything from my experiences?

Yeah, that's a possibility but after the responses from the Apple locations and the guarantee that my model will be available for purchase at FCFS, I don't think I'll have much to do with Verizon locations regards it all.
I think the reason you're receiving yours on Friday is you are east coast whereas I am west coast. I think there was some truth to the Fifth Contact's response and that it also depends on the warehouse the order is coming from. My warehouse is more than likely different than yours and probably has a larger demand/smaller supply than your warehouse.
I live in Southern California, and my county alone has 3.1M people. The four surrounding counties have 10M people, 2.3M people, 2.1M people, and 3.2M people. iPhone is king out here as far as phones, so I'm chalking it up to supply/demand in my warehouse, and that my order was processed much later than many others in my area.
I'll check back on my order tomorrow and Thursday, but unless I have a notice that shows it going out for delivery on Friday by being at my local FedEx facility, I'm going to an Apple store, getting a phone there, and cancelling my order with Verizon.

Mail Server and SMTP Configuration (Leopard Server)

Hello,
Our setup: Mac OS X SERVER 5.2 - LEOPARD SERVER
PowerPC G5
Orange Internet connection via a router / DHCP
We try to find such assistance in configuring your Mac book
OS Server at your service.
We set our server with a local area "domaine.intranet"
We created users with the interface, and have an address
"[email protected]."
Our messaging system works internally with the client MAIL.
We also have an Internet domain "domaine.fr", this area is hosted
In online.net.
We have personal e-mail addresses such as "[email protected]" always
Hosted by online.
We can check our e-mails via the client MAIL by IMAP.
However, we do not send emails to the outside world, and especially
"Domaine.fr" or "[email protected]."
In the console admin Server:
-- LETTERS: we have turned the SMTP protocol allowing mail
Entrant, authorizing "Relayer outgoing mail over the host:
Smtp.orange.fr "
At the tab relay, we leave the config classic 127.0.0.0 / 8
And 192.168.1.0/24.
In the history of mail, there are "postfix / postfix-7563]: fatal: the
Postfix mail system is not running, why then that the service operates on
Priori!
How can I be able to send emails to the outside knowing that we
Use addresses' [email protected]. "
Please tell us a direction to follow or procedure.
Sincerely,
ORIGINAL IN FRENCH
Notre configuration : Mac OS X SERVER 5.2 - LEOPARD SERVER
PowerPC G5
Connexion internet orange via un routeur/DHCP
Nous avons essayer de trouver cette aide à la configuration dans votre livre Mac
OS Server à votre service.
Nous avons configuré notre serveur avec un domaine local en "domaine.intranet"
Nous avons créé des utilisateurs à l'aide de l'interface, et avons une adresse
"[email protected]".
Notre système de messagerie fonctionne en interne avec le client MAIL.
Nous avons également un domaine internet "domaine.fr", ce domaine est hébergé
chez online.net.
Nous avons des adresses mail personnel du type "[email protected]" toujours
hébergé chez online.
Nous pouvons consulter nos emails via le client MAIL par IMAP.
Par contre, nous n'arrivons pas à envoyer des emails à l'extérieur, et notamment
sur "domaine.fr" ou "[email protected]".
Dans la console d'admin Serveur :
- COURRIER : nous avons activé le protocole SMTP en autorisant le courrier
entrant, en autorisant "Relayer le courrier sortant via l'hôte :
smtp.orange.fr"
Au niveau de l'onglet relais, nous avons laisser la config classique 127.0.0.0/8
et 192.168.1.0/24.
Dans l'historique de courrier, il y a "postfix/postfix-script[7563]: fatal: the
Postfix mail system is not running", pourquoi alors que le service fonctionne à
priori !
Comment faire pour pouvoir envoyer nos emails à l'extérieur sachant que nous
utilisons les adresses "[email protected]".
Merci de nous indiquer une direction à suivre ou une procédure.
Cordialement,
Message was edited by: serveurbense

Hello,
Thanks for the reply.
I modified according to your advice and tried to send mail, but it does only internally. My mail.log gives me the following information:
Apr 21 10:59:30 domaine postfix/smtp[4521]: 46D302308BE: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.84]:25, delay=0.27, delays=0.05/0.01/0.16/0.05, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.84] said: 554 <[email protected]>: *Recipient address rejected: Missing Authentication (in reply to RCPT TO command))*
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 2147323090F: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 022FF230937: to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.01/0.04/0/0.23, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: *Sender address rejected: Domain not found (in reply to MAIL FROM command))*
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: Sender address rejected: Domain not found (in reply to MAIL FROM command))
Apr 21 11:00:27 domaine postfix/cleanup[4600]: 602A423094E: message-id=<[email protected]>
Apr 21 11:00:27 domaine postfix/bounce[4612]: 022FF230937: sender non-delivery notification: 602A423094E
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: from=, size=3531, nrcpt=1 (queue active)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 022FF230937: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 602A423094E: to=<[email protected]>, relay=cyrus, delay=0.06, delays=0.01/0/0/0.05, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: removed
Apr 21 11:01:10 domaine postfix/postfix-script[4664]: refreshing the Postfix mail system
Apr 21 11:01:10 domaine postfix/master[2938]: reload configuration /etc/postfix
Apr 21 11:01:26 domaine postfix/smtpd[4516]: disconnect from domaine.intranet[192.168.1.11]
Apr 21 11:02:10 domaine postfix/postfix-script[4734]: refreshing the Postfix mail system
I am looking for solutions to correct mistakes 553 and 554, hoping that this will allow us to send mail out.
Do you have any other suggestions?
Thank you.
Bonjour
merci pour la réponse.
J'ai modifié selon vos conseils et essayé d'envoyer des mails, mais ça ne marche qu'en interne. Mon mail.log me donne les informations suivantes:
Apr 21 10:59:30 domaine postfix/smtp[4521]: 46D302308BE: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.84]:25, delay=0.27, delays=0.05/0.01/0.16/0.05, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.84] said: 554 <[email protected]>: *Recipient address rejected: Missing Authentication (in reply to RCPT TO command))*
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 2147323090F: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 022FF230937: to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.01/0.04/0/0.23, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: *Sender address rejected: Domain not found (in reply to MAIL FROM command))*
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: Sender address rejected: Domain not found (in reply to MAIL FROM command))
Apr 21 11:00:27 domaine postfix/cleanup[4600]: 602A423094E: message-id=<[email protected]>
Apr 21 11:00:27 domaine postfix/bounce[4612]: 022FF230937: sender non-delivery notification: 602A423094E
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: from=, size=3531, nrcpt=1 (queue active)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 022FF230937: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 602A423094E: to=<[email protected]>, relay=cyrus, delay=0.06, delays=0.01/0/0/0.05, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: removed
Apr 21 11:01:10 domaine postfix/postfix-script[4664]: refreshing the Postfix mail system
Apr 21 11:01:10 domaine postfix/master[2938]: reload configuration /etc/postfix
Apr 21 11:01:26 domaine postfix/smtpd[4516]: disconnect from domaine.intranet[192.168.1.11]
Apr 21 11:02:10 domaine postfix/postfix-script[4734]: refreshing the Postfix mail system
Je cherche des solutions pour corriger les erreurs 553 et 554, espérant que cela nous permettra d'envoyer des mails à l'extérieur.
Avez-vous d'autres propositions?
Merci d'avance.

Application server 8.2 configuration settings

I load some libs at classpath settings at JVM settings. It's working but i don't know the effects that this change makes. I read the Sun docs, but it says nothing about the effects... Somebody can help me on??
I want to know if the server will override their libs!!!!
thanks in advance

Hi
I have tried installing and running the Sun application server 8.2 on Red Hat Enterprise Linux 5, it works fine for me. But it gave issues on in the pre-prod environment.
We got the reply from the support as it is not supported with RHEL 5, they have asked us to run it on RHEL 4.
So the bottom line would be that you can try installing and run few test but for the prod or pre-prod environment it is not recommended.
-Vishal Iyer

AirVideo Server and Apple TV?

I have lots of videos that I have converted to "itunes format" but I have numerous home videos from when I used to be on Windows that won't play in itunes. I know I can convert them but I am running AirVideo Server on my Mac desktop and it allows me to "convert on the fly" and watch those videos in their native format on my Touch.
Does anyone know if there is a way of using AirVideo Server to allow me to watch those videos on my TV through Apple TV without first having to convert each one of them?
TIA (thanx in advance)

Birdman325 wrote:
I am running AirVideo Server on my Mac desktop and it allows me to "convert on the fly" and watch those videos in their native format on my Touch.
doing this requires
(a) the server software on your Mac and
(b) a client app on the mobile device
so, some kind of app would need to be running on TV and that's currently not possible. however, who knows what's gonna be possible if and when Apple decides to open an TV app store ...
meanwhile, have a look @ [Airflick|http://www.tuaw.com/2010/12/20/airflick-turns-macintosh-into-an-airplay-data-se rver>.

SAP Content Server and DMS configuration

Hello,
I need help in configuring the relation between DMS and SAP Content Server. I need to make documents to be stored in a Content Server Repository and can't see clearly how to configure it from SPRO transaction.
Thanks!
Patricia

Hello,
can you tell as the solution for this problem please?
i got the some error message - but only on one server?!
the note 925327 dosn't help's
thank you
thomas berger

NAC guest server and pre-configured duration of accounts

There seems to be a bug in the way the NAC guest server handles the pre-configured duration of guest accounts.
I have followed the manual and I did:
- Configured 3 durations (24h, 48h and 1 week) under the templates/accounts/accounts durations.
- And set "maximun duration of account" under User Groups
As I understand I should now be able to select one of the three configured durations when I login as a sponsor.
However I only get the number which I specified under User Group.
The odd thing is that if I change the Maximum duration under User Group, I get this as the only choice (e.g. 14 days).
Have other experienced this?
Best regards,
Steffen Lindemann

You can use any one of the option ie number of days or number of hours.
For days;
Authentication > User Groups > Add Group | Edit Group includes two new settings for Number of days in the future the account can be created and Maximum duration of account (in days)
For hours:
User Interface > Templates > Add Template | Edit Template > Accounts > Account Duration
http://www.cisco.com/en/US/docs/security/nac/guestserver/release_notes/11/gsrn110.html

SLD server and UME configuration

Dear Portal Gurus,
I have configured the UME as ABAP datasource (R/3) with client (001). all the things sld is running and able to create jco connections .
iam not able to create users from user adminstration when the client is 001
when i modify the ume configuration with client as 800 and giving proper username and password after restarting the j2ee server iam able to create users . but the problems iam facing are.
1) SLD is not runnining.
2)Logon page language is changed.
3) All the JCO's are not working.
what are the steps to be taken in j2ee server to modify the ume configuration . and successfull running of sld and logon page.
Regards
prasad

solved by me

Update to 10.9.1 whips out Server and Apple Configurator Settings

Similar Messages

Maybe you are looking for