Update using XSODATA from XSJS file

Friends
Can some one help me with the code to form a AJAX "PUT" request to the XSODATA service to update the records in the Table.
I know this is possible, because, I am able to update the records in the DB using POSTMAN.
I have tried different AJAX calls. But none worked.
Would be thankful, if someone can help me with the code to get this working
Regards
Giri

thanks all. I have got this working using the code.
var rssUpdateData = { "EMP_ID" : "0",     "EMP_CLASS" : "NULL"};
var sendInfo = JSON.stringify(rssUpdateData);
var xsjsURL = "/Start_UI5/ODATA/create.xsodata/EMPTABLE(0)";
$.ajax({
        type: "PUT",
        url: xsjsURL,
        contentType: "application/json",
        data: sendInfo,
       dataType: "JSON",
        success: function(result) {
            alert(result);
        error: function() {
            alert("Error while calling the server!");
Regards
Giri

Similar Messages

Read an avi file using "Read from binary file" vi

My question is how to read an avi file using "Read from binary file" vi .
My objective is to create a series of small avi files by using IMAQ AVI write frame with mpeg-4 codec of 2 second long (so 40 frames in each file with 20 fps ) and then send them one by one so as to create a stream of video. The image are grabbed from USB camera. If I read those frames using IMAQ AVI read frame then compression advantage would be lost so I want to read the whole file itself.
I read the avi file using "Read from binary file" with unsigned 8 bit data format and then sent to remote end and save it and then display it, however it didnt work. I later found that if I read an image file using "Read from binary file" with unsigned 8 bit data format and save it in local computer itself , the format would be changed and it would be unrecognizable. Am I doing wrong by reading the file in unsined 8 bit integer format or should I have used any other data types.
I am using Labview 8.5 and Labview vision development module and vision acquisition module 8.5
Your help would be highly appreciated.
Thank you.
Solved!
Go to Solution.
Attachments:
read avi file in other data format.JPG ‏26 KB

Hello,
Check out the (full) help message for "write to binary file"
The "prepend array or string size" input defaults to true, so in your example the data written to the file will have array size information added at the beginning and your output file will be (four bytes) longer than your input file. Wire a False constant to "prepend array or string size" to prevent this happening.
Rod.
Message Edited by Rod on 10-14-2008 02:43 PM

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to use image from a file in signature appearance.

Hi,
I am creating a Plugin for acrobat 9, using PubSec using DocSign sample as basis. I have created the appearance using text objects and the logos data that came with the DocSign sample. But I want to use image from a file (like, jpg) in the signature appearance creation. So far the documentation doesnt tell how to achieve this.
Can you please tell me in a "How-to" kinda way to achieve this?
Thanks in advance.

Thanks for ur prompt reply.
There are so many samples in the sdk. which one is the "sample for adding images."?

[POL-3309] trying to use datapage from different file.

Getting this error trying to access both the ESB and BPEL datasources in SOA Suite 10.1.3 GA.
Any ideas how to fix?

I am also getting same error message when I am trying to establish a olite connection. Moreover I got this error when I opened BPEL console :
Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "jdbc/BPELServerDataSourceWorkflow". The exception reported is: [POL-3309] trying to use datapage from different file
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
Please provide solution.....

How to open saved files using 'read from text file' function

Hi everyone, I am having a hard time trying to solve the this particular problem ( probably because I am a newb to lanbview ). Anyway , I am able to save the acquired waveforms by using the 'Write to text file' icon. I did manually modify the block diagram of the 'Write to text file' icon and create the correct number of connector so as to make my program work. But now I have no idea on how to modify the block diagram of the 'Read from text file' block diagram to make my program 'open' my saved waveforms. Or i do not have to modify anything from the block diagram of the 'Read from text file'? Can anyone teach/help me connect up? Do i need the build array on the "open" page?
Here are some screenshots on part of my program
let me know if you guys would need more information / screenshots thank you!
Attachments:
ss_save.jpg ‏94 KB
ss_open.jpg ‏94 KB
modified_writetotextfile.jpg ‏99 KB

Ohmy, thanks altenbach. oh yeah i forgot about those sub VIs. will upload them now. Was rather demoralized after reading the comments and really struck me on how weak i'm at on labview really hope to get this done. But of course i have to study through and see how it works. Actually i am going to replace those 'signal generators sub vi' with ThoughtTechonology's sample code so i can obtain data waveforms real-time using Electrocardiography (ECG) ,Electromyography (EMG ) and Electroencephalography (EEG) hopefully i can find out how to connect the sample code.
( ps . cant connect it now unless my program is working otherwise labview will crash )
( p.s.s the encoder of my biofeedback trainer already acts as an DAQ so i wont need to place an DAQ assistant in my block diagram i suppose )
The sample code of ThoughtTechnology is named as attachment.ashx.vi. too bad i cant use it and present it as my project
Attachments:
frequency detactor.vi ‏53 KB
signal generator.vi ‏13 KB
attachment.ashx.vi ‏40 KB

Problem using read from spreadsheet file and polar plotting

Hi to all labview users,
i am a beginner in labview and i am trying to do a polar plot.
i read the polar plotting example in labview and it was straightforward.
I used "write to spreadsheet file" to gather data.
and they are in the following format
13 10
4 20
8 30
....etc
now. i tried using "read from spreadfile" to get the data into a array, then using "array to cluster" to convert the array into cluster, so i could connect it to the polar plot block
however, it kept saying i couldnt connect that way, because polar plot uses 1-d array with cluster of 2 element and my source is a cluster of 9 elements....
but doesnt the "read from spreadfile" block give me a 1-d array? and where does that 9 come from? i only have 3 rows and 2 columns in my data file....
any guidance would be greatly appreciated.
thx alot
Happy guy
~ currently final year undergraduate in Electrical Engr. Graduating soon! Yes!
~ currently looking for jobs : any position related to engineering, labview, programming, tech support would be great.
~ humber learner of LabVIEW lvl: beginner-intermediate

Helllo,
I've made an example to try to help you with that question.
Notes:
- the file must have values separeted by tab
- reading the values from file as you mentioned using "read from spreadfile" you'll get a 2D array and not 1D;
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL
Attachments:
Read Table and plot polar graph.vi ‏26 KB
teste.txt ‏1 KB

Has anyone tried to update using the direct download file of 4.2.1?

My internet connection isn't the fastest at home so I downloaded the update file at my office using the following link :
http://appldnld.apple.com/iPad/061-9857.20101122.VGthy/iPad1,14.2.1_8C148Restore.ipsw
Any tips on how to proceed with doing the update using this file? I know you have to Option-Click the Update or Restore button, and then browse to the update file, but I was wondering if there is anything else I should do first.

Thanks to both of you - I was running 4.2 on my iPad, and the download link at daw.apple.com for the 4.2.1 GM was taken down after it shipped - so I was bummed...
Found your post with the direct download link - boom! Happy camper...
Aaron

Format precision apparently ignored when using read from spreadsheet file

I hope there is ridiculously simple solution to this problem but so far I can't find it. Using the Read from Spreadsheet File function in LabVIEW7.1, I can't get the floating point format (%f) to work; the decimal (%d) seems to work fine. For example, the first value in the attached file is 399.5853. When I read it in using %.2f format I would think I should get 399.58 but instead I get 399.58529663... Oddly if I use %d as the format, I get an as expected value of 399. Can anyone see what I am missing?
Attachments:
ReadFileTEST.vi ‏23 KB
test.txt ‏1 KB

The solution to the problem is the internal representation of floating point numbers: with a limited number of bytes only a limited number of the (infinitely many) real numbers can be represented. The nearest representable number to 399.5853 is 399.58529663 if the so-called single precision representation (abbr. SGL in Labview) is used.
It seems that (ridiculously!) NI has chosen to use SGL as the data format in the Read from Spreadsheet VI which causes the unexpected behaviour you observed.
You can change the representation from SGL (which uses 4 bytes) to DBL (double precision, using 8 bytes) in the Read from Spreadsheet VI and you will observe a better approximation then, but still not 'exact' since the number now reads 399.585300000000018. (With t
he EXT representation, 10 bytes, you could go to even higher precision)
I hope someone from NI reads this and they fix the unnecessary limitation of the precision in the Read from Spreadsheet VI.

Is there a file size limit when using Read From Spreadsheet File?

I'm trying to read in a large file, about 52mb, 525600 lines with 27 fileds in each line using "Read From SpreadsheetFile.vi". I then search the 2D array for -999, which represents bad/no data in that field and total the number of fields with -999 in it. This all works on 3 months worth of data. The program is giving me an out of memory error and stopping in the case where the read takes place on the large one year file. So my question is does the Read from Spreadsheet file have size limitations? Is there a better way to do this? Thanks in advance for the help.
ssmith
Solved!
Go to Solution.

Camerond--
Thanks for the help. I recreated the VI you posted and unfortunately it doesnt work. It looks like the index array vi is only looking at the zero index and not the other 26 fields in each row. This would probably require a FOR LOOP to go through each field index. This is what I have and it works on a smaller version of the file. For some reason LV is using up bucket loads of memory to run this smaller file and crashes running the 60MB file. I've attached one of my vi's to solve this problem and the smaller data set. You'll see in the beginning that I trim some columns and rows to leave just the data I want to scan. Thanks again for the help.
I just tried send 3 months worth of one minute data and it failed. So here is a really small version, 20 minutes worth of data. Does anyone see anything that would cause memory usage issues here?
ssmith
Attachments:
Find-999NoLoops.vi ‏17 KB
TEST2MET.txt ‏3 KB

Need a script to update AD information from Excel file, however employee ID is use for identify the user in AD

Please help me to get this done!....Thanks in Advance
This is current script I use to update AD record but its taking user id to pick the user in AD, which is some time give error not update properly..
# UpdateUsers.ps1
# PowerShell program to update Active Directory users from the information in a
# Microsoft Excel spreadsheet. Only single-valued string attributes supported.
# Author: Richard Mueller
# PowerShell Version 1.0
# September 12, 2011
Trap
If ("$_".StartsWith("Cannot load COM type Excel.Application"))
"Excel application not found, program aborted"
Add-Content -Path $LogFile -Value "## Excel application not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If (("$_".StartsWith("Exception has been thrown")) -and ($Step -eq "4"))
"Excel spreadsheet not found, program aborted"
Add-Content -Path $LogFile -Value "## Excel spreadsheet not found: $ExcelPath"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If ("$_".StartsWith("The server is not operational"))
"Domain Controller not found, program aborted"
Add-Content -Path $LogFile -Value "## Domain Controller not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If ("$_".StartsWith("The directory service is unavailable"))
"Active Directory not found, program aborted"
Add-Content -Path $LogFile -Value "## Active Directory not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If ("$_".StartsWith("The specified domain"))
"Domain not found, program aborted"
Add-Content -Path $LogFile -Value "## Domain not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
"Unexpected error: $_"
Add-Content -Path $LogFile -Value "## Unexpected error: $_"
Add-Content -Path $LogFile -Value " Step: $Step"
Break
Function CleanUp
Trap
"Error during cleanup: $_"
Add-Content -Path $LogFile -Value "## Error during cleanup: $_"
$Script:Errors = $Script:Errors + 1
Continue
# Function to release Excel objects from memory.
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Columns)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Rows)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Range)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Sheet)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Worksheets)} While ($x -gt -1)
$Workbook.Close($False)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Workbook)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Workbooks)} While ($x -gt -1)
$Excel.Quit()
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Excel)} While ($x -gt -1)
# Specify paths to spreadsheet and log file.
$Script:Errors = 0
$Step = "1"
$ExcelPath = "c:\scripts\UpdateUsers.xls"
$LogFile = "c:\scripts\UpdateUsers.log"
Write-Host "Please Standby..."
# Add to the log file.
$Step = "2"
Add-Content -Path $LogFile -Value "------------------------------------------------" -ErrorAction Stop
Add-Content -Path $LogFile -Value "UpdateUsers.ps1 Version 1.0 (September 12, 2011)"
Add-Content -Path $LogFile -Value $("Started: " + (Get-Date).ToString())
Add-Content -Path $LogFile -Value "Spreadsheet: $ExcelPath"
Add-Content -Path $LogFile -Value "Log file: $LogFile"
$Step = "3"
# Open specified Excel spreadsheet.
$Excel = New-Object -ComObject "Excel.Application"
$Workbooks = $Excel.Workbooks
$Step = "4"
$Workbook = $Workbooks.Open($ExcelPath)
$Worksheets = $Workbook.Worksheets
$Sheet = $Worksheets.Item(1)
$Range = $Sheet.UsedRange
$Rows = $Range.Rows
$Columns = $Range.Columns
$Step = "5"
# Hash table of attribute syntaxes.
# The LDAP display names will be read from the spreadsheet.
# The corresponding syntaxes will be read from the Schema container.
$Attributes = @{}
# Array of spreadsheet column headings.
$Cols = @()
$Step = "6"
# Read attribute LDAP Display Names from the first row of the spreadsheet.
$ID = 0
For ($k = 1; $k -le $Columns.Count; $k = $k + 1)
# Retrieve column heading, the lDAPDisplayName of an attribute.
$Value = $Sheet.Cells.Item(1, $k).Text
# Keep track of all column headings.
$Cols += $Value
# Skip duplicates in hash table.
If ($Attributes.ContainsKey($Value) -eq $False)
# Default is "NotFound", until found in the AD Schema.
$Attributes.Add($Value, "NotFound")
# Keep track of which column uniquely identifies users.
If ($Value.ToLower() -eq "distinguishedname") {$ID = $k}
If (($Value.ToLower() -eq "samaccountname") -and ($ID -eq 0)) {$ID = $k}
# This script cannot be used to rename users.
If ($value.ToLower() -eq "cn")
Add-Content -Path $LogFile -Value "## This script cannot be used to rename users"
Add-Content -Path $LogFile -Value " Do not specify the cn attribute in the spreadsheet"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
CleanUp
Return "Program aborted: cn attribute found in spreadsheet" `
+ "`nSee log file: $LogFile"
$Step = "7"
If ($ID -eq 0)
Add-Content -Path $LogFile -Value "## No column found to identify users"
Add-Content -Path $LogFile -Value " One column must be distinguishedName or sAMAccountName"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
CleanUp
Return "Program aborted: No column found in spreadsheet to identify users" `
+ "`nSee log file: $LogFile"
# Create filter to query for attributes in the schema.
$Attrs = $Attributes.Keys
$Filter = "(&(objectCategory=AttributeSchema)(|"
ForEach ($Attr In $Attrs)
$Filter = $Filter + "(lDAPDisplayName=$Attr)"
$Filter = $Filter + "))"
$Step = "8"
$RootDSE = [System.DirectoryServices.DirectoryEntry]([ADSI]"LDAP://RootDSE")
$Domain = $RootDSE.Get("defaultNamingContext")
$Schema = $RootDSE.Get("schemaNamingContext")
$Step = "9"
# Use the NameTranslate object.
$objTrans = New-Object -comObject "NameTranslate"
$objNT = $objTrans.GetType()
# Initialize NameTranslate by locating the Global Catalog.
$objNT.InvokeMember("Init", "InvokeMethod", $Null, $objTrans, (3, $Null))
$Step = "10"
# Retrieve NetBIOS name of the current domain.
$objNT.InvokeMember("Set", "InvokeMethod", $Null, $objTrans, (1, "$Domain"))
$NetBIOSDomain = $objNT.InvokeMember("Get", "InvokeMethod", $Null, $objTrans, 3)
Add-Content -Path $LogFile -Value "NetBIOS name of domain: $NetBIOSDomain"
$Step = "11"
$Searcher = New-Object System.DirectoryServices.DirectorySearcher
$Searcher.SearchRoot = [ADSI]"LDAP://$Schema"
$Searcher.PageSize = 200
$Searcher.SearchScope = "subtree"
$Searcher.PropertiesToLoad.Add("lDAPDisplayName") > $Null
$Searcher.PropertiesToLoad.Add("attributeSyntax") > $Null
$Searcher.PropertiesToLoad.Add("isSingleValued") > $Null
$Searcher.PropertiesToLoad.Add("systemFlags") > $Null
# Filter on specified attributes.
$Searcher.Filter = $Filter
$Step = "12"
# Query Active Directory.
$Results = $Searcher.FindAll()
# Enumerate recordset.
ForEach ($Result In $Results)
# Retrieve properties of attributes.
$Name = $Result.Properties.Item("lDAPDisplayName")[0]
$SysFlags = $Result.Properties.Item("systemFlags")[0]
$SyntaxNum = $Result.Properties.Item("attributeSyntax")[0]
$SingleValued = $Result.Properties.Item("isSingleValued")[0]
# Only single-valued string attributes supported by this version of the program.
Switch ($SyntaxNum)
"2.5.5.12" {$Syntax = "String"}
Default {$Syntax = "NotSupported"}
If ($Name.ToLower() -eq "distinguishedname") {$Syntax = "DN"}
If (($SysFlags -band 4) -ne 0)
$Attributes[$Name] = "Constructed"
Else
If ($SingleValued -eq $True)
$Attributes[$Name] = $Syntax
Else
$Attributes[$Name] = "NotSupported"
$Step = "13"
# Check if any attributes not found or have unsupported syntax.
$Found = $True
ForEach ($Attr In $Attrs)
$Syntax = $Attributes[$Attr]
If ($Syntax -eq "NotFound")
Add-Content -Path $LogFile -Value "## Attribute $Attr not found in schema"
"Attribute $Attr not found in schema"
$Found = $False
If ($Syntax -eq "NotSupported")
Add-Content -Path $LogFile -Value "## Attribute $Attr has a syntax that is not supported"
"Attribute $Attr has a syntax that is not supported"
$Found = $False
If ($Syntax -eq "Constructed")
Add-Content -Path $LogFile -Value "## Attribute $Attr is operational, so is not supported"
"Attribute $Attr is operational, so is not supported"
$Found = $False
$Step = "14"
If ($Found -eq $False)
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
CleanUp
Return "Program aborted" `
+ "`nSee log file: $LogFile"
# Read remaining rows of the spreadsheet, until the first blank value is found
# in the column that identifies users.
$Step = "15"
$Script:Updated = 0
$Script:Unchanged = 0
$j = 2
Do {
# Retieve ID value for the user first.
$Value = $Sheet.Cells.Item($J, $ID).Text
$Found = $False
$Step = "16"
If ($Cols[$ID - 1] -eq "distinguishedname")
# Any forward slash characters must be escaped.
$DN = $Value.Replace("/", "\/")
# Bind to the user object.
# If user not found, $User.Name will be $Null.
$User = [ADSI]"LDAP://$DN"
If ($User.Name -ne $Null)
$Found = $True
$Step = "17"
If ($Cols[$ID - 1] -eq "samaccountname")
Trap
Write-Host ""
"Error translating name: $_"
Add-Content -Path $LogFile -Value "## Error translating name $Value"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
# Convert sAMAccountName to distinguishedName.
$DN = ""
$Step = "18"
$objNT.InvokeMember("Set", "InvokeMethod", $Null, $objTrans, (3, "$NetBIOSDomain$Value"))
$DN = $objNT.InvokeMember("Get", "InvokeMethod", $Null, $objTrans, 1)
$Step = "19"
If ($DN -ne "")
$Step = "20"
# Any forward slash characters must be escaped.
$DN = $DN.Replace("/", "\/")
# Bind to the user object.
$User = [ADSI]"LDAP://$DN"
$Found = $True
If ($Found -eq $True)
$Step = "21"
# Read remaining values for this user.
$Changed = $False
For ($k = 1; $k -le $Columns.Count; $k = $k + 1)
# Skip the identifying column.
If ($k -ne $ID)
$Step = "22"
# Retrieve attribute name for this column from array.
$AttrName = $Cols[$k - 1]
# Retrieve attribute syntax from hash table.
$Syntax = $Attributes[$AttrName]
$Step = "23"
# Retrieve attribute value for this user.
$Value = $Sheet.Cells.Item($j, $k).Text
# Skip blank values.
If ($Value -ne "")
If ($Syntax -eq "String")
Trap
If ("$_".StartsWith("The directory property cannot be found"))
Continue
Else
Write-Host ""
"Error retrieving value from Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error retrieving $AttrName for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
$Step = "24"
# Single-valued string attribute.
# Retrieve existing value.
$OldValue = ""
$OldValue = $User.Get($AttrName)
# Check if existing value to be deleted.
If ($Value.ToLower() -eq ".delete")
If ($OldValue -ne "")
If ($AttrName.ToLower -eq "samaccountname")
Add-Content -Path $LogFile -Value `
"## Mandatory attribute sAMAccountName cannot be cleared for user: $DN"
$Script:Errors = $Script:Errors + 1
Else
Trap
Write-Host ""
"Error deleting value from Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error deleting $AttrName for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
$Step = "25"
# Make the attribute value "not set".
$User.PutEx(1, $AttrName, 0)
$Changed = $True
Else
$Step = "26"
# Check if new value from spreadsheet different.
If ($Value -ne $OldValue)
Trap
Write-Host ""
"Error assigning value from Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error assigning $AttrName for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
# Assign the new value to the attribute.
$User.Put($AttrName, $Value)
$Changed = $True
Else
# Unexpected error.
Add-Content -Path $LogFile -Value `
"## Unexpected syntax: $Syntax for attribute $AttrName for user $DN"
$Script:Errors = $Script:Errors + 1
If ($Changed -eq $True)
Trap
Write-Host ""
"Error saving to Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error saving to AD for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
$Script:Updated = $Script:Updated - 1
Continue
$User.SetInfo()
Add-Content -Path $LogFile -Value "Update user: $DN"
Write-Host "." -NoNewLine
$Script:Updated = $Script:Updated + 1
Else
Add-Content -Path $LogFile -Value "User unchanged: $DN"
Write-Host "." -NoNewLine
$Script:Unchanged = $Script:Unchanged + 1
Else
Add-Content -Path $LogFile -Value "## User not found: $Value"
Write-Host "." -NoNewLine
$Script:Errors = $Script:Errors + 1
$j = $J + 1
} Until ($Sheet.Cells.Item($j, $ID).Text -eq "")
$Step = "27"
CleanUp
Add-Content -Path $LogFile -Value $("Finished: " + (Get-Date).ToString())
Add-Content -Path $LogFile -Value "Number of users updated: $Script:Updated"
Add-Content -Path $LogFile -Value "Number of users unchanged: $Script:Unchanged"
Add-Content -Path $LogFile -Value "Number of errors: $Script:Errors"
Write-Host ""
"Done"
"Number of errors: $Script:Errors"
"See log file: $LogFile"

Actually scripts run fine with excel file, currently we are using user-id to pick to update AD. Now we want to update AD use employee id. You can say to identify the record in AD through employee ID instead of user-id.
I do not think you will get anyone here to fix that for you. You need to find someone who knows PowerShell to help you or learn PowerShell your self.
I would fix it for you but not for free. It is too oddly designed and has too many dependencies. Any small change is likely to break it.
¯\_(ツ)_/¯

How do you make iTunes read updated tag data from a file?

This is such basic functionality that I'm sure I'm just missing it. It used to be the when I modified a file using a third party application (or editing a shared library using iTunes running on a different machine), all you had to do to get those updates into iTunes was select, hit "get info" and click OK without changing anything. That broke in 9.2 - it still recognized that the file has changed and adjusts the Date Modified field, but doesn't actually update any of the fields.
The revised tags don't get updated until you either Get Info individually on each file, play the file, or modify the files. So realistically, there are no workarounds - the first two aren't realistic for a full library and the latter trashes your modification date and causes the refresh to take hours to complete if the library is on a remote server, rather than the ten minutes it used to take.

turingtest2 wrote:
Hi,
I've written a script called UpdateTagInfo which should do the trick for you. Just select a bunch of tracks or an appropriate playlist and call the script. It will process each track, updating the tags if they've been changed externally. When complete it will tell you how many tracks were processed & how many were updated.
More scripts at http://samsoft.org.uk/iTunes/scripts.asp
tt2
This is great! Thanks for posting and letting us know...
Sandy

Update a JTree from a file

Hello everyone i have a wee bit of a problem here i have a JTree that gets updated by a text file. That bit works grand when the JTree is loaded it reads the text file and displays the contents now the bother i am having is the user has the option to add a new item to the text file but i cannot not seem to get it to update the JTree. I got to a point where it displayed the old and the new data in the tree is there a way to delete the old stuff

I think you need to rebuild the entire tree each time there is a change. This way, you are certain that all the items that are removed from the textfile are also removed from the tree.
Unless off course the text file is edited through the same application that displayes the tree, then you can come up with something smarter then that...
Mark

Remove-Mailboxes using Powershell from CSV file

hello all ,
I encountered in problem with my exchange Server 2010
I have a mission to delete closed 150 Mailboxes in my organization
I tried a lot times to use the command "Remove-mailbox " and i anytime got error
I would appreciate the help of one of you maybe guide me because is very important for me to resolve this problem
so meantime i did export of mailbox from exchange server with content "Userpricplename" to CSV file after than export does success i did filtering and tried to perform this commad :" import-csv c:\Mailboxes.csv | foreach {Remove-Mailbox -userprincipalname
$_.Emailadress }
please see the errors below :
excel content :
website: www.PelegIT.co.il

Hi ,
If we set -Confirm:$false EMS will not prompt for yes or no option while executing commands in shell.
If we set -Confirm:$true EMS will prompt for yes or no option while executing commands in shell.
Thanks & Regards S.Nithyanandham

Updating Gallery Pictures From xml file

Hello there im editing a website and it had a gallery of
pictures with several categories this is the link of the gallery
http://www.jeweltechinter.com/jeweltech/gallery/gallery.html
but there is no way i can update the picture need some help
to know what should i do to update pictures i heard through xml
file but i dont know how if someone can help me that would be
great.
thx in advance

Hello ,
Try this out ..
http://www.kirupa.com/developer/mx2004/xml_flash_photogallery.htm
Cheers,
Srirama S

Update using XSODATA from XSJS file

Similar Messages

Maybe you are looking for