Updated Date not populated for Vendor in R3 Tables

Hi
I made few changes for Vendor in R3 but it didn't update UPDAT field in LFA1 Table whereas i could see other data fields changed that i did in the screen.
Could you pls. tell me why is it Or Is there any configuration required for updating Update field in R3 Tables....
Thanks...

Hi Harpal,
There are two ways you can check it,
1) Directly do the changes in vendor master transaction and before saving switch on debugging (/h) through command bar and simply debug the code and you can check where the data is getting updated.
2) Once you do all the changes in vendor master through transaction, start another session and put transaction ST05, switch on the trace, after that go to earlier transaction and save. In the ST05 screen simply switch off the tract and display trace.
In the shown trace check the update command on LFA1 table from there you can analyze which are all the fields it is writing to table.
Regards,
Durgesh.

Similar Messages

Data Not Populating for report

Hi,
i am using Oracle BI Applications 7.9.6, i just loaded few sample data using universal adaptor. In "Financials GL - Budget and Expenses" subject area, there are two facts: Facts-Budget, Facts-Actuals.
I could get the data with dimensions across these two fact columns independently like "one column from company dimension + one measure from Facts-Budget" and "one column from cost center dimension + one measure from Facts-Actuals", but when i apply the report with "one column from company dimension + one column from Facts-Budget + one column from Facts-Actuals", i am unable to get any data. I have checked the physical tables if data was coming and row counts are fine. Please suggest me on what should i check on.
Thanks,
Sreekanth.

Hi
could you please provide the error you are getting while running the report other way you can go through below mentioned link
OBIEE: Incorrectly defined logical table source doesn't contain mapping
i hope this will help you..
thanks & regards

Data not populated for Enhanced field

Hello,
I had done enhancement by adding field to the LO Datasource.
Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
What is the reason that i am not able to see the data for the enhanced field in RSA7?
Thanks in Advance!
Regards
M.A

Hi M.A,
This means that there is no delta data for that field.
If there is no change in the data for that field then you cannot see any data in RSA7.
Check in the Delta repetition in the RSA7 for any data for that field.
Regards,
ravi Kanth

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Please update the functional specifications for Vendor Balance Report

Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama Mohan

Hello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft

Part1 is not generating for Vendor Subsequent delivey

Hi ASAP
I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods.
1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevant register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capture & Posting using J1IS&V.
For Excise, Part1 is getting created using J1IS, J1IV is creating Part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
Any way, After GR of 123, I have Capture Excise Invoice after inputting all relevant data, but while Posting, System is generating message that Part1 is does not exist for vendor excise invoice.
Now I think requirement is visible for your understanding to suggest me some valuable idea.
If possible can plz drop a test mail to hksiva.manoj at gmail dot com for further clarification?
Thanks & Regards
Manoj K Singh

Hi Rajaram,
Thanks for your ealiest reply, yes i have done the config. which you suggested,
Even after this " Specify which mvt type involves excise invoices", assignment system is not generating Excise screen for Movt. 123 w. r. t. 122.
Manoj K Singh

Part1 is not Generating for Vendor Subsequent Delivery

Hi ASAP
I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods.
1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevant register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capture & Posting using J1IS&V.
For Excise, Part1 is getting created using J1IS, J1IV is creating Part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
Any way, After GR of 123, I have Capture Excise Invoice after inputting all relevant data, but while Posting, System is generating message that Part1 is does not exist for vendor excise invoice.
Now I think requirement is visible for your understanding to suggest me some valuable idea.
If possible can plz drop a test mail to hksiva.manoj at gmail dot com for further clarification?
Thanks & Regards
Manoj K Singh

Hi Rajaram,
Thanks for your ealiest reply, yes i have done the config. which you suggested,
Even after this " Specify which mvt type involves excise invoices", assignment system is not generating Excise screen for Movt. 123 w. r. t. 122.
Manoj K Singh

I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I have not changed anything thankyou for any info.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, elect the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
See also: remove app
Keywords: refunded canceled

Vendor Creation ,Partner role OA not allowed for Vendor of a/c group ZLOV

Dear Freinds,
I am facing problem of Vendor creation , i am getting message PARTNER ROLE OA NOT ALLOWED FOR VENDOR OF ACCOUNT GROUP ZLOV.
While creation of Vendor in Partner function i could not enter partner number, system is not accepting any data, message is getting as above.due to which i could not create any vendor.
Presently I am in process/ setting of ERS functionality in MM,
now all my Vendor creation is stuck up ,
please help me how to solve the problem
Regards
Dilip

Hi Dilip,
Check first have you Define Permissible Partner Roles per Account Group..
Check the path:
SPRO-Materials Management-Purchasing-Partner Determination-Define Permissible Partner Roles per Account Group
Here check whether OA is assigned with ZLOV or not...If no then click on new entries and enter partner function as OA and Vendor account group ZLOV...Save nd come out...
Now proceed...Hope it helps..
Utsav

Excise Details are not maintanied for Vendor: GRN error

Dear All,
We have upgraded our Ecc 6.0 system to latest application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
Please let me know if any note or object to be updated to correct this error.
Thanks
Raghavendra.

hiii
Can u tel me where exactly the excise range was missing ??
Because if excise range is missing , it won't throw this lind of error .
U have found any other???????
Thnaks
SAP-MM

Viber - the update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

VIBER does not work!
the update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

Hi everyone yesterday I was experiencing the same problem I am glad to share its fixed now for me
"This issue is only related to our Apple ID and to to those specific apps which we already have on phone or had installed on phone before except for those apps which we already have in purchase history AppStore>Updates>Purchase History(having cloud icon next to them) it's something related to our purchase data
*ITS NOT RELATED TO PHONE!
*RESETTING OR UPDATING THE DEVICE WONT MAKE A DIFFERENCE!
(As in my case it was on iPhone 4 7.1.1 iPhone 5s 7.0.3 and iTunes of course )
Here is how I got it fixed
I contacted apple support via chat method and I asked about a solution giving my info.she told me that she submitted my application and in order to resolve this I should not be using my AppStore ID for any purchase for at least 30mins as doing so may not resolve the issue so I checked it after couple hours and it's fixed
(As I read in some other discussions that some people asked for solution from apple support and they told them to reset the device or so.. You may need to make your statement clear that it's appearing both on iTunes and iPhone )
A lot of people are already facing this problem

This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. what i can do for that ?

This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled i have never use any other id so i am confused.... what i can do for that ? any idea...

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 5
According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm.

The update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

Ipone 5s
Problem
the update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

Hi everyone yesterday I was experiencing the same problem I am glad to share its fixed now for me
"This issue is only related to our Apple ID and to to those specific apps which we already have on phone or had installed on phone before except for those apps which we already have in purchase history AppStore>Updates>Purchase History(having cloud icon next to them) it's something related to our purchase data
*ITS NOT RELATED TO PHONE!
*RESETTING OR UPDATING THE DEVICE WONT MAKE A DIFFERENCE!
(As in my case it was on iPhone 4 7.1.1 iPhone 5s 7.0.3 and iTunes of course )
Here is how I got it fixed
I contacted apple support via chat method and I asked about a solution giving my info.she told me that she submitted my application and in order to resolve this I should not be using my AppStore ID for any purchase for at least 30mins as doing so may not resolve the issue so I checked it after couple hours and it's fixed
(As I read in some other discussions that some people asked for solution from apple support and they told them to reset the device or so.. You may need to make your statement clear that it's appearing both on iTunes and iPhone )

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Updated Date not populated for Vendor in R3 Tables

Similar Messages

Maybe you are looking for