Updated v1 Phone--Now no WiFi if WPA/WPA2 is on--Airport Extreme

I updated my v1 phone to 2.0 last night. I no longer get anything but Edge using my Airport Extreme at home when WPA/WPA2 is on.
As soon as I turn security off, the WiFi symbol appears.
Help us Apple!!

Anyone?

Similar Messages

  • My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

    my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

    UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

  • HT4061 I was trying to update my phone now is asking me to restore my phone, can I have some help please?

    I was trying to update my phone now is asking me to restore my phone, can I have some help please?

    https://discussions.apple.com/message/18750831#18750831

  • I've updated my phone now I can't turn it on

    I've updated my phone now I can't turn it on

    Didn't work ... asked to restore ... and message "waiting for iphone" ... phone screen the same (apple icon & loading icon but it's empty//)

  • HT201401 i just updated my phone & now it will not let me click on any of my apps that were installed or purchased

    i just updated my phone & now it will not let me go into any of my apps that were installed or purchased

    Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

  • My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?

    My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?  Is the ethernet route less efficent that going throught the internet connection?  If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall?  Thanks for help on this!

    Ok, so are you saying that your Internet is or isn't working?  Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)?  If it is working this way, then a new modem isn't going to solve a problem with your Internet not working.  If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow.  If it runs fine this way and then slows back down when you go back through your router there is something else going on.  Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any?  Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

  • Slow WiFi transmission and low signal power (Airport Extreme extended by Airport Express)

    I am experiencing slow wifi transmission between my notebooks and my base stations and I am hoping someone can help me fix it.
    My wifi configuration is the following:
    1 Airport Extreme base station (acting as router, wifi "creator" and DHCP server)
    1 Airport Express base station (connected to Airport Extreme with a LAN cable, set up to extend wireless network)
    1 Lenovo T410 notebook with Intel Centrino Ultimate N-6300 AGN WiFi antenna (I will call this one "Lenovo"), connected to wireless network, running Windows 7
    1 MacBook Pro purchased in 2009 (I will call this one "Mac"), connected to wireless network, running Mac OS X Lion
    1 QNAP T209-II NAS, connected to Airport Extreme via UTP cable
    Airport Extreme (AXTRM) is creating a 802.11n wireless network with WPA2+PSK security with MAC address filtering. The other base station, Airport Express (AXPRS) is connected to AXTRM via a UTP cable. AXPRS is set to extend my wireless network.
    My first problem is low signal power. My appartment is 90m2 in size and is in one floor. It is a new flat with high ceiling and modern layout, meaning little walls, big rooms and wide corridors. Still my notebooks, iPhones and iPad can barely reach AXTRM when I am on the other side of the flat. This was the reason why I purchased AXPRS and placed it in the middle of the appartment. My notebooks are placed just on the other side of the AXPRS's wall (less than 1 meter of distance and a simple 10cm brick wall in between), yet signal strength is only at about 80% (measured on my Lenovo using Lenovo Access Connections tool).
    My first question is: Is it normal that in a 90m2 flat with not unusual obstacles, I need 2 base stations and even then have a rather poor reception?
    My second problem is even more disturbing. I think I have catastrophic transfer speeds via wLAN. It takes over 1 hour to transfer cca. 1GB of files (average size 8MB) from my Lenovo or Mac to my QNAP. My Lenovo is showing about 250kb/s transfer rate when copying files. At the same time, Windows 7 show connection speed 144Mbps. This mean about 18MB/s. I know these numbers are theoretical and that actual transfer speeds are lower. But hey, 72 times lower? Furthermore, if I copy files from my Mac and my Lenovo at the same time, transfer speed is slightly lower. On the other hand, if I connect my notebooks to AXTRM via LAN cable and copy files to QNAP, transfer speeds are a few megabytes per second.
    To make things even more confusing for me: if I transfer files from the internet, I get download speed at about 700kb/s, which is quite in line with my internet download speed. I don't understand why transfer speeds within my local network are so much lower.
    Therefore, my second question is: How to set up my base stations and my routers to get a decent wifi connection?
    I hope someone could help me. If you need any more information, just ask. Thanks!

    From my experience of setting up the Airport WiFi for family members and friends, I have learnt the following :-
    1. Airport Express is not as good as Airport Extreme, for being as extender, the difference can be quite a lot.
    2. There is always a dead cornor (bad reception) in a house
    3. Even moving the Airport Extreme / AE a few inches, the performance can be improved quite significant
    4. If possible, always choose 5G 802.11n than 2.4G, unless there are many thick walls.
    My suggestion will be as follows :
    1. Moving out the AEBS out of a closet, is a good idea
    2. Always try to locate the AEBS in the centre of a area, instead of the two sides
    3. Try to test the AEBS without an extender, and find the best location area (don't place on the floor, neither above 6 feet height)
    4. After finding a best location, set the extender closer to the AEBS, and then moving apart from it (check the performance after every move), it is better that both devices can face each other.
    5. I can't tell you the reason, and some people may not agree with me, the new 2013 Airport Exteme performance is better and may be is a good idea to replace your Airport Express, and use it to connect with your router, and old AEBS as an extender
    6. Some Powerlinks (in case you can't use a wired ethernet connection between the two devices) work and some don't work with Apple Airport products, therefore, if possible, have an option to return them to the shop if they do not match
    Good luck

  • Since update my phone and my wifes both recieve calls intended for either phone

    Since we updated to the latest iOS, when a call is sent to my phone or my wife's phone, they both ring and the call can be taken on either phone.  The phones are on separate contracts with 3 and have different numbers.  Can I revert back to only the phone being called ringing out and taking the call?

    Go to Settings > FaceTime and turn "iPhone Cellular Calls" to off on each device. It is a feature of Continuity: Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    You may also want to investigate/consider using separate Apple IDs for you and your wife. It is more flexible, doesn't result in issues like this, and is now more practical with new family sharing features. https://www.apple.com/ios/whats-new/family-sharing/

  • Update failed, phone now just displaying logo and update bar, how do i restore my phone?

    Latest update has failed, my phone now only displays the apple logo and the update bar, How do I restore my phone?

    Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version.  The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

  • Wireless update freezes phone now stuck please help

    my torch has started a wirless update but when getting through back up freezes between 8 an 20 % . Have noticed in forum that this is known but for a computer update you just take out this as a back up option but on a wireless update the phone is stuck if I do a battery pull and put itback after few mins it starts again and tries to update is there anyway to cancel update or solve this. tried pluggin into pc but doesnt do anything different. please help

    Hello,
    A forced wireless update? I've honestly never seen that...quite unusual...normally, you must initiate the process. Nevertheless, as I'm sure you've seen, OTA updates are NEVER recommended for exactly the situation you are experiencing. The OTA update conducts an on-device backup, which is used to restore after a successful OS update. But, if anything should go wrong, that backup file is lost forever. Hence, updating via PC is recommended since you then have the opportunity to take a manual backup and store that resulting IPD file on your PC.
    But, back to your issue...the update being forced is rather strange. If there's no way to prevent it, then perhaps you could try the following:
    Turn off all network connections (both mobile carrier data network as well as WiFi) and then do a batt-pull reboot. See if the update continues to be forced...if not, then proceed with a PC/USB based update.
    Failing that, try booting into Safe Mode and see if you can then keep the forced update from running:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    I've honestly never tried to update the BB OS (from a PC) when the BB is in Safe Mode, but you could give that a try and see if it helps.
    Let us know how those attempts work out for you.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Updated my phone now everythings screwed up

    I updated my phone last nite and now its gone bat **** insane. When the screen goes black as a screen saver clicking the button does not activate the screen until about 3 minutes later. Everything lags on the phone, when the phone is locked the slider does not work at all. Resetting the phone does not help. Plugging it in does not help, the phone still has the charging logo in the top right corner for a couple minutes after disconnecting it from the outlet. I can't get calls, the phone will sound like its ringing when someone else is calling but my phone doesn't vibrate, ring or anything. Anyone experiencing this at all?

    I was having the same problem, my phone shutting off from sleep mode..... i left it out in my car while i was at work, during a super cold night this week, and when i came back out about 5 hours later, it was still powered on... it has been doing a lot of strange things since the 1.1.3 update though. i had no sound through my headphone jack or through my speakers, the power button seems like its on the fritz and text messaging is miserably slow... (maybe network dependant) Anyways, i really dont know what to tell you except, i just restored my phone (option+click restore, search for "1.1.3") and now sound is fine but it's still very slow. I think they should have waited for the release of the newest update because it is not stable on 100% of the phones. Mine has never been hacked either.

  • Just installed new update to phone, now its saying plug into itunes but itunes doesnt recognise device

    Just installed new update to phone 5s this morning, now its saying plug into itunes but itunes doesn't recognize device.
    when the files were being extracted my pc stopped any idea of a fix?
    or can i remove the update from the program files and re-download it for my phone to be functional again?

    Hello giz mckenna,
    The article linked below details a number of steps that can help get iTunes to recognize your iPhone.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/en-us/TS1538
    Cheers,
    Allen

  • Nokia Belle update failure - phone now bricked

    I happened to see my phone(N8) telling me that an update was available and I had to perform the operation through PC suite rather than previous FOTA methods. Strange, but I was very excited to try my hands on Belle. I setup the battleground for the update. Got the latest Suite(3.3.86), downloaded the firmware through it, and started the update.
    The suite tookup the backup of the phone contents and then started to update. The update procedure asked to ignore any windows complaints of USB device being unplugged, and I just followed. After sometime, a pop-up comes saying that the communication with the device failed, and I need to press the power key for 10s. I performed and three vibrations came. Nothing happened. I kept waiting for much more time and later terminated the process to see my phone is bricked.
    My attempts to search to reset the phone to some factory setting(I wonder why 16GN eMMC was required then) also failed. There is no way one can get his phone back if the update fails. Now its not strange for me why Nokia is a failure brand.
    I purchased N8 believing the quality of Nokia phones. Initial updates like Anna and other minor updates to it went on well. I am now unhappy with Nokia. I think the whole process of update is pain. I am not sure why, but the method chosen to update was painsome. I hope someone responsible in Nokia would read this, and I want to tell them, N8 would be your brand's last phone to be owned by me, even if you sell moon through microsoft(another pain company) in future.

    As of now, your only option is a three finger reset mentioned by Tim. Try it. You've nothing to lose. I hope you've a back up of all data. If that doesn't boot up your phone, then take it to a nearest Nokia care.
    blitZkid
    Nokia C7: Running on Nokia Belle
    "If I'm helpful in anyway, a click of appreciation on the star would be nice"

  • Updated to Mavericks - Now dropping WiFi connections like crazy

    The title says it all. On an early 2013 MacBook Pro retina. Running perfect until the day I upgraded to Mavericks. Now my WiFi drops anywhere from once an hour to every 5 minutes, and also has trouble reconnecting after waking up from sleep. I've tried the various fixes mentioned on the forums and collected here, but nothing has worked yet.
    To be clear, I have many devices/computers in the house, and only one of them has trouble wiht WiFi, the one I upgraded to Mavericks, and it started the day I upgraded it to Mavericks.
    There seem to be a lot of other sufferers. Any good solutions?

    Words cannot describe how angry this problem makes me. How can world's largest tech company not been able to fix their biggest bug for this many months now?!?!
    All these forums are overflowing with the same **** problem: WIFI DOESN'T CONNECT AFTER COMING BACK FROM SLEEP ON MAVERICKS.
    How many thousands of people have to post the same godddamn problem for how long?
    And no, disconnecting Bluetooth doesn't help (even if it did, its not an acceptable solution). I took my MacBook Air to Apple store twice already and they cannot help either.
    aaaAAAAaAaaAAaaarrrrghhh, I'm going to go insane from this problem.
    I miss Steve.. he wouldn't let something like this go on for this long. Can a half a trillion dollar company pay attention to its own support forums or at least google "wifi-not-connecting-after-sleep-mavericks" and realize what incompetent company you have become?!

Maybe you are looking for