Updating an existing Movie - MP3 problems

I am updating a movie created by a previous employer. It involves screen shots and voice overs.
There is a navigation bar at the bottom with scrubber, stop, next, etc.
I named the new screen shots the same as the old ones and imported them and everything works fine. But this doesn't seem to work with the voice overs. As soon as I save over an old mp3 with the new one, the nav bar no longer works.
Any ideas?
Thanks,
Jean

what's causing sound to play? actionscript (loading or attaching) or timeline embedding of sound? if it's timeline, make sure your sound is streaming.

Similar Messages

When i login to update my existing apps, the login window shows the wrong apple id. and it's all prayed out, i can't change it. how do i solve this problem?

When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

We bought a time capsule then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now?

We bought a time capsule, 1TB, then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now? Does APPLE do not provide latest firmware for this item?

How old is that Time Capsule? The fact that it still have firmware 7.3.1 suggests that it's not the latest model. The latest firmware available for my two-year-old model is version 7.5.2. Apple does provide firmware updates. You just have to let the Time Capsule download and install them. Use AirPort Utility to do that.
Regarding your Wi-Fi problem, please explain what you mean by "it does not identify the existing wireless network".
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Every time I try to update my existing apps I'm not successful and I get a message saying it can't connect. I've try changing my password and still no success.

I'm getting a can not connect message every time I try to update my existing apps that need to be updated. I even put in a new password thinking that was the problem. Can someone please help me. This has been going on for two weeks.

Hello Priscilla43,
The following article provides tips and suggestions that can help restore your connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

Old project with entity 4.0 breaks when adding new model or updating an existing model.

i have an old 4.0 project that was using entity 4.0
in VS2013 if I try to update an existing model or add a new one, it will forcefully install the entity framework 5.0 even though the selection in the box was to use 4.0
it goes out to nuget to do this and then it will forever add 5.0 even if I uninstall it.
5.0 getting installed completely breaks my application. References to tables disappear and cross reference for NO reason at all with another model.
How can i get it to just let me use 4.0 so I can move on OR how can i upgrade my old model into 5.0?
I'd rather not got tthe 5.0 route because that changes a lot of the ways things were done and would break even more code.

Hello,
>>in VS2013 if I try to update an existing model or add a new one, it will forcefully install the entity framework 5.0 even though the selection in the box was to use 4.0
It is not very clear how you install the Entity Framework, as far as I know, the EF version 4.0 is available with .NET 3.5, from .NET 4.0, it will use the 5.0 by default, if you want to use the EF 4.0, you could change the target to .NET 3.5.
>>How can i get it to just let me use 4.0 so I can move on OR how can i upgrade my old model into 5.0?
If it is EF 5.0, as far as I know, it uses the DbContext API instead of the original ObjectContext API(the EF 4.0 uses this API) which provides a better performance, if you want to keep to use ObjectContext API, you could follow this article:
Reverting Back to ObjectContext Code Generation
The article shows the configuration for VS2012, for VS2013, you could change the Code Generation Strategy from T4 to Legacy ObjectContext.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Outlook-Updates to EXISTING Calendar and Contact entries not syncing correctly - two PC's

My setup is two PC's (one at work, one at home), one BB. Both PC's Outlook are Outlook 2003, SP3. I do not use BES. I sync my BB to both PCs.
I have experiencing specific issues where updates to existing Outlook Calendar (mtg notes) and Contact (contact notes) are not being sync'd from one PC to the next PC (via my BB device - Sprint Curve 8330 running OS v4.5.0.131). I sync PC's to my BB using BB Desktop Mgr (v4.7) and USB cable.
Here are specific details of what I am doing to duplicate the issues.
1) Calendar:
I have been away from work the past two days. In that time, I have updated two (2) calendar items at my PC at home - both items are at my work PC as well.
Item one: I moved the date from Wed to Thurs, and added a note - done from home PC
Item two: I changed the description of the meeting, and shortened appt from 3 hrs to two hrs - done from home PC
Both items sync OK with my BB
Upon coming to work this morning, neither sync'd to my work PC. I finally did the following:
Item one: I deleted from Desktop Outlook, opened in BB put a space in the meeting description saved.
Item two: Opened on BB, put a space in the meeting description saved.
Upon resyncing, here is what happened
Item one: Sync Mgr noticed conflict of deleting from PC and changed in BB. I chose to copy item to PC. This results in syncing correctly to PC
Item two: Sync'd to PC correctly.
Something is NOT right. The sync process did NOT recognize these two items that changed until I manually intervened (updating on the BB).
2) Contact:
I ran a test today where on my work PC, I added a comment into one contact's note. I successfully sync'd that contact note to my BB. However, when I sync the BB with my home PC, that note did NOT make it to the home PC.
I opened the contact (in edit mode) on my BB, inserted a space to the contact's name, erased the space, and saved the contact.
I then sync'd the BB to the home PC again. This time, success - the contact's note got sync'd to the home PC.
HELP
I have seen this sort of thing a few times before (where sync did not sync a Calendar event/mtg correctly) in the past three months or so I owned my BB - but this is the first time I decided to actually test out the fix. This is the first time I noticed with a contact (maybe b/c i do not look at my Contacts updates as closely as I do my Calendar mtgs updates)
Message Edited by Winger on 06-12-2009 10:32 AM
Message Edited by Winger on 06-12-2009 10:33 AM

Thanks for your feedback:
2 things..... I somehow had created a duplicate calendar which may have been >blocking the sync. If you have it as well, delete this calendar and try to sync.
I have several calendars in Outlook - there is the main one which contains everything, then where I have marked certain entries as 'Personal' or as 'Anniversaries' etc a separate calendar is created with those entries in them.
Also, I read somewhere that some calendar entries will corrupt the sync of the > phone. Delete all new entries since the last successful sync and enter a test >entry and try to sync the phone. To the best of my knowledge, there is no >indication that an appointment is "bad" other than the phone will stop syncing. >So perhaps after each sync, check the phone to ensure any new entries appear.
I can't possibly tell when the last successful synch occurred! I also don't want to delete entries - I need them all!
There appears to be very little advice on this problem, hopefully this will >work.
Yes, it seems that the Great God Apple isn't anywhere as smart as it thinks it is. I am really frustrated and not a little angry. This is basic stuff for any other phone, let alone a Smart Phone!
Thanks for your comments, though.

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

Lenovo Drivers Insufficient for update to 8.1 - Driver problem - H430

Lenovo Drivers Insufficient for update to 8.1 - Driver problem (USB?) - H430
my lenovo H430 is about 6 months old - worked okay with preinstalled Windows 8
After update to Windows 8.1 computer no longer seemed to work well at all, although I am unable to provide hard evidence, but clearly it was not working as smoothly as in the previous 8 version with lots of irritating little problems - including sound.
One thing that very clearly was not functioning as it had in 8 version was the USB disconnect icon. In 8 you only had to click on icon and the USB selection window would open immediately. Additionally all USB connections would be shown - back and front USB. Select the USB to be disconnected and it would be disconnected immediately (providing not in use). After update to 8.1 this was no longer the case.
In 8.1 disconnect icon no longer worked as it had done in 8. After clicking on icon there was now always a lengthy pause, followed by the sound of the computer working (whirring sound) and then after a while the USB selection window would finally open. Sometimes it was necessary to click on icon a few times to get any reaction at all. A small MP3 player I had charged up on my computer every morning (front USB) in windows 8, was always in USB list, and disconnected without problem in 8. In 8.1 it was no longer in list and only charged sporadically (would stop charging, but if I clicked on USB icon it would start charging again - although still not shown in USB list).
After about two weeks of 8.1 my screen suddenly - but only briefly - went black twice. I ran a sfc /scannow. problems were found but could not be resolved. I did a Dism /Online/Clean-Image/RestoreHealth this was reported as being successful. About two days later my computer went into blue screen BSOD - "critical-services-failure" - from which I was unable to get out of. The only option open was the Lenovo restore option. Computer was returned to factory state with los of all data.
back to Windows 8 the computer once again worked okay - no problems - and USB icon once again worked correctly (including with MP3 player).
About 2 weeks later after receiving MS messages to update to 8.1 I called Lenovo support and asked about update to drivers for 8.1.
the following list was given:
Chipset: Intel chipset Driver for Windows 8.1 (64-bit) Version : 9.4.0.1022
Video: CPP2 AMD DISCRETE VGA CARD DRIVER for Windows 8.1 (64-bit) Version: 13.152
Audio: Realtek Audio Driver for Windows 8.1 (64-bit) Version: 6.0.1.7030
LAN: Realtek Lan Driver for Windows 8.1 (64-bit) Version: 8.018.0621.2013
STORAGE: Intel RST Driver for Windows 8.1 (64-bit) - Desktop Version: 12.8.0.1016
I updated to 8.1 and then updated all the above drivers (no USB driver update was available).
The same problems as the last update to 8.1 and USB was as bad as it was in last 8.1
Some days later my computer went into blue screen BSOD once again - although this time did not stay stuck there, and quickly restarted - due to speed of restart I did not get time to read all the text and discover the cause of BSOD.
Computer is still running badly - particularly the USB icon disconnect.
Called Lenovo support but they have been no help!!!!!!!!!!!!!!
Lenovo are failing us with the 8.1 update and the DRIVERS FOR 8.1
BSOD
all i could find was this: (probably refers to after BSOD - the restarting part after BSOD???)
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2013-12-20T08:12:33.642341400Z" />
<EventRecordID>9644</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>myleno</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">209</Data>
<Data Name="BugcheckParameter1">0xb8</Data>
<Data Name="BugcheckParameter2">0x2</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0xfffff8000020170a</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>

I have now seen the suggestion by Tomaspoko and Brillow at http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Windows-8-1-update-S440-ThinkPad-black-screen-wit...
Despite the AMD driver giving an error during install at the last stage of the suggested fix, this has now yielded a working switchable graphics for my S540 for the first time with Windows 8.1. Catalyst Control Center also works for the first time, so thank you to both the above-mentioned posters for a solution that does work.
Hopefully in time AMD will release a non-broken updated AMD driver and CCC package.
Thanks again for a nice solution from this forum - the problem was driving me nuts!

What is the best tool for updating an existing Domain?

What I want to do is create an installation program that updates an existing domain
with a new server and a new application targeted to that server. The installation
program has to work with any valid domain and needs to be easy for the end-user.
Using a script to extend an existing domain using the configuration wizard insilent mode seems like a real good approach. The problem is that a Server is NOT
a configuration object type available when extending an existing domain. So I
can’t add a new server to an existing domain with this approach.
Using ANT tasks – wlconfig and wlserver would probably do the trick. The issuehere is that the domain admin server must be running, and my preference is that
this not be the case. Using JMX has the same issue.
So what I’m I left with in terms of tools? Anything? Or do I have to manipulatethe config.xml file directly? Is this a good idea?
Has anyone else faced a similar scenario, and what solution did you come up with?
Thank You

ANT and wlconfig is a way.
config.sh has an off-line tool for updates.
whshell is an alternative to ANT.
We are working on a solution to unify all of this in Diablo.
cheers
mbg
"Greg" <[email protected]> wrote in message
news:3fa294c7$[email protected]..
>
What I want to do is create an installation program that updates anexisting domain
with a new server and a new application targeted to that server. Theinstallation
program has to work with any valid domain and needs to be easy for theend-user.
>
Using a script to extend an existing domain using the configurationwizard in
silent mode seems like a real good approach. The problem is that a Serveris NOT
a configuration object type available when extending an existing domain.So I
can't add a new server to an existing domain with this approach.
Using ANT tasks - wlconfig and wlserver would probably do the trick. The
issue
here is that the domain admin server must be running, and my preference isthat
this not be the case. Using JMX has the same issue.
So what I'm I left with in terms of tools? Anything? Or do I have to
manipulate
the config.xml file directly? Is this a good idea?
Has anyone else faced a similar scenario, and what solution did you comeup with?
>
Thank You

QT "invalid public movie atom" problem - iPod Classic

I encountered a strange "invalid public movie atom" problem relating to my brand new iPod classic (80GB):
I used QTpro 7.4.1(14) to convert several movie/avi files for iPod (the standard procedure via the offered converting methods).
After copying them to the iPod via iTunes, they showed flawlessly on the iPod and i was also able to watch them on my TV.
Then i converted another file, copied it to iPod and tried to start the video, the result was a fuzzy green screen (like some encountered it with the album art) and the the iPod crashed (restarting automatically with the grey apple-logo screen).
I did this a second time, it crashed, and after restarting again, i tried it with one of the videos that worked fine before. One of them then caused the same problem, green fuzzy screen, restarting automatically!
When i tried to open these two files mentioned with QT from the movies folder in my iTunes library, i got the "invalid public movie atom" message and, well, the videos don´t play anymore. (keep in mind, they played before!)
Important: i did a clean install about two weeks ago, installing all updates (OSX, QT, iPod, etc.) before doing anything else. The first videos im talking about are older, but worked well after the cleaninstall/update procedure was done. Since then nothing was changed and now suddenly the problem appears?!
Some thoughts: i read here in other posts that A the iPod sometimes crashes because of that "album art problem", but that doesn´t have anything to do with video?! B since it worked before (the last days since i did the clean install) the bug , or whatever it is, "appeared" based on another issue?
Thx :-/
Hardware/Software involved: PowerMag G5 dual 2GHz., iPod Classic 80GB, OSX 10.5.2, QT 7.4.1(14), iTunes 7.6.1(9), iPod 1.1.1
I also posted this in the QT for Mac OS section:
http://discussions.apple.com/thread.jspa?threadID=1442446&tstart=0

There is a little piece of code that tells iTunes which movies can be played on iPod. It is called the iPod Atom. If you have a movie that is fully compatible with iPod BUT doesn't have this atom, it just won't sync regardless the movie can actually be played by the iPod. I have been having trouble with these little bastards myself...
My guess on your problem is that the converted movies weren't 100% compatible with your iPod but they had the atom so they synced. Some AVI movies plays partially on QT.
May I suggest that you instal Perian which adds a lot of codec handlers to Quicktime and try to re-encode some of them.
On my side, I have been trying to find how to insert the aforementioned iPod Atom on movies that have already been encoded so I don't have to re-encode them again... But that's my personal quest. Good Luck!
Alec
Costa Rica

CC update is REALLY confusing and problem filled... need advice please

I have 2 macs. On one, I just clicked on the update all in the CC desktop notification...what a mistake that was! LR would not work at all and PS installed a new version and (I think) updated my old version. But the new version does not have all my plugins working with it - it asked me if I wanted to migrate something (presets or something) and I said yes, but that did not seem to work either.
My question are:
1- do I really want to update Photoshop CC AND Photoshop cc 2014???
2- is there no way to just update the existing version so all the plugins work without an hour or so of figuring out how to reinstall them???
The LR problem I finally solved by downloading 5.5 manually and manually installing over the bad CC desktop install.
whew... what a bungle from Adobe...they are so proud of their new glitzy Web site and new apps and can't even update existing ones with out disaster... I've turned off auto download forever !!!
thanks for the help and for letting me vent ... so much anxiety and wasted time...
cheers,
tom

The main cause of slow system is due to certain heavy applications running in the background
We agree on that.
or because of duplicate and hidden files.
Files visible, hidden, the same as other files, do not do anything, unless they happen to cause the disk to be completely or nearly full. Otherwise they are just 1's and 0's. They are passive (speaking as a paid file system developer).
These files can't be easily removed.
If they can't be removed, then they are essential to the proper operation of the operating system (such as /private/var/vm/swapfie(s)). And if you have huge swapfile(s), then it is an indication of running too many RAM hungry apps concurrently, or a Mac that could use more RAM.
So I think using speed up Mac software is the best solution.
Hang around these forums long enough and you will see that in many cases those speed up, clean up, anti-malware apps "ARE" the "certain heavy applications running in the background" to use your own words. It has been the experience of the long time forum contributors that once these 3rd party utilities are removed, most performance issues and system panics go away.

Updating an existing Movie - MP3 problems

Similar Messages

Maybe you are looking for