UPDATING HTML PAGE AFTER UPDATING DATABASE

Hello,
I work on servlet, and when I update my database (MS Access) and redirect to a new HTML page, the information are not updated, that's the reason why I have to click on the button of my browser to actualize.
So how can I do not to have to click...
Thank you very much

u passing all argument when redirect method use
if possible show your code

Similar Messages

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?l

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?

Solving this requirement on a modern Windows system is going to be problematic too, as the autorun mechanisms are increasingly being locked down over there, if not by the end-user or the system installer, then by the usual anti-malware tools that are installed.
Given this is one of the most vulnerable populations here in terms of operational security, you'll probably want to target online distribution, or to distribute a signed application that can be installed on the target (akin to a managed system) and that then accesses your data on external storage. All that app might do is access the disk, verify that the contents of the device are trusted and valid, and launch the browser.
I'd likely target online distribution or pre-loaded distributions and iOS, as that's where all of the older folks I'm dealing with are headed, too. If not a native app, then maybe a web-app here, and download the contents into the HTML5 local storage.

Load HTML page after animation

After searching the forum and only finding the answer for
AS2, I'm wondering if anybody can direct me to the finding the
answer to my problem in AS3. I've created multiple movieclips into
buttons that animate when you press them. I'm wondering how to have
it then direct to an HTML page AFTER the animation finishes. I've
tried several different things, and I can't seem to get this to
work.
Thanks a lot!

Can you provide the AS2 solution? I'd like to see if I can
figure it out. I just don't know that I'll find your posting
again.

Flash not playing on html page after template is altered

Hi,
Can anyone help. If i alter anything on a template none of the .swf files on pages based on that template will work when previewed in the browser.
I am using DW CS3.
Anyone any ideas

Good day,
This issue can be considered as a limitation at some point because Dreamweaver lacked the ability to "auto-update", although it was not really the best practice to include Flash contents in a DW template.
There is a workaround though. You may need to edit the template (.dwt) itself and work in Code View.
While in Code View, use the Find and Replace (Edit > Find and Replace) feature so it will be easier for you to find what you are looking for.
In the Find and Replace window, choose Current Document as value for Find in, and Source Code as Search.
In the Find input field, type --> 'src' (including the single quotes) and click on Find Next.
Once you found 'src', pay attention to the text next to it enclosed in single quotes. The value in the single quotes is the path of where the Flash file is saved. try to remove ../ if you happen to see it. (do this if the Flash file is located in the same folder where the HTML page which uses it is saved)
Using Find and Replace again, this time, try to search for 'movie' (including single quotes). You'll see again the text next to it which is the same value as what you have searched before. Do the same thing, try removing ../. (do this if the Flash file is located in the same folder where the HTML page which uses it is saved)
Save the DW template file and try to preview the pages again in the browser.
I hope this helps.
Regards,
Christine R.
Adobe North America Technical Support

Clearing a HTML page after incremental creation of page

Hi,
I am building a JSP page incrementally as shown in the code snippet below; What I know want to do is to clear the complete HTML code after execution of the for loop.
Is this possible ?
Thanks in Advance :-)
<html>
<head>
    <title>Partial Output Demo</title>
</head>
<body>
    Partial Output
    <% for(int ii=0; ii<10; ii++) {
        out.println("<br/> #" + ii);
        out.flush();
        try {
            Thread.sleep(1000);
        } catch(final InterruptedException ex) {
            ex.printStackTrace();
            break;
     %>
</body>
</html>

found it out ;-)
<html>
<head>
    <title>Partial Output Demo</title>
    <script language="javascript">
        function show() {
            document.write("Partial Output Complete");
    </script>
</head>
<body onload="show()">
    Partial Output
    <% for(int ii=0; ii<10; ii++) {
        out.println("<br/> #" + ii);
        out.flush();
        try {
            Thread.sleep(1000);
        } catch(final InterruptedException ex) {
            ex.printStackTrace();
            break;
     %>
</body>
</html>

Passing to an another HTML page after animation finished

My question in english:
Hello, good morning,
I have created a Flash animation with Flash 8 and I have exported it in HTML format.
I would like that at the finishing animation, there is an automatical transfer to another HTML page of my choice (for example after xxx seconds), like we could see in the web (redirection in fact). I would have also the possibilty to put an "Skip Intro" link in the animation page for people that don't want wait the final of animation.
How make this operation with Flash 8 directly or I must write an HTML code in it to this operation.
Thanks a lot for your answer and helping
Ma question en français:
Bonjour,
J'ai créé une animation Flash avec Flash 8 et je l'ai exporté au format HTML. Je voudrais qu'à l'issue de l'animation, à la fin de cette animation, il y ait passage automatique (au bout de x secondes par exemple) à la page web de mon choix (une redirection en quelque sorte). J'aurais la possibilité dans la page contenant l'animation de mettre un lien "Skip intro" pour les internautes qui ne voudraient pas attendre la fin de l'animation pour consulter mon site web.
Comment faire pour faire cette manipulation, est-ce possible directement dans la création de ma page en Flash ou dois-je mettre un bout de code HTML pour que cette transition se réalise?
En vous remerciant pour votre réponse et votre aide.

It depends on which version of Actionscript your file is using.
For an AS2 file you use getURL() to link to a web page. You could use the setTimeout() function to delay triggering the getURL() call.
For AS3 you use navigateToURL() to link to a web page. You could use the setTimeout() function or the Timer class to delay triggering the navigateToURL() call.
In both cases you could place the call to the linking function inside another function that you call either using the delayed calls of the functions mentioned, or using a button to call the function for the skip intro.

Toolkit for CreateJS showing blank HTML pages after publish on only some Flash projects?

When I used Toolkit for CreateJS on Flash CC for the first time on a simple test movie, it worked fine. I've now created a new movie of a scrolling portfolio banner to go on my homepage. After hitting publish, it only shows a blank HTML page, with a white box the size of the stage.
I even tried it again when removing the buttons and tweens and still no joy. Is there a way I can upload both files to show you and to see if there's a difference in which why the newer one isn't working. Both have more than one layer. The test one moves out of the screen, while the new one fades out. I've even tried putting an alpha effect on the test to see if it doesn't play, but it still works fine.
Please help.
Thanks
Adam

Do you see any errors listed in the output panel?

Blank HTML pages after install of sp3a?

After just installing Service Pack 3a, Some of the domains are just serving up blank html pages. The other thing is that some logins will get the right page, and some don't, and new logins always do not get the right page. The page is blank, and when you view the source, that's blank, too. Could you please point me in the right direction to start looking? All of the required patches were installed prior to the installation of the new service pack.

The HTML page that needs to be served might be missing in the domain templates directory /etc/opt/SUNWips/auth/<domain name>. Provide more details (specifics) of the problem to direct you to the logs where you can find the error details.
The problem is basically caused when the application (servlet) aborts (by throwing an exception) and hence client (browser) request socket is closed.

How to call html page from an applet

I want to call a html page after the user presses a OK button in the applet. please help me in this.

In you actionPerformed put:
AppletContext appContext=getAppletContext();
URL myURL= new URL("http://www.javasoft.com");
String target="_self";
appContext.showDocument(myURL,target);P.S. If you want to pen the URL in a new Browser window
use
target="_blank";

Embed iCal into iWeb through HTML snippet after Lion OSX update

How do I embed my published iCal calendar into iWeb through an HTML snippet AFTER the Lion OSX update last month? I use iWeb to create my classroom website but it no longer has my interactive calendar for my students. Help!

I am curious about this too, does anyone know how to embed a Lion iCal Calendar into iWeb?
I found an old walkthrough of how to do it, but on the published site it just opens ical and offers a subscription, you cannot actually see the calendar on the web page it is embedded on.
Thanks!

Issue with templates and updating .html pages in my website

Hello,
I have taken over updating a website for the charity I work for. I have updated some eleements of the .dwt template page, however it does not seem to be updating the other .html pages for the website. I do not get the update pages box just a box saying 'You placed the editable region "breadcrumbs" inside a block tag. Users of this template will not be able to create new blocks in this region. Move the region outside the block tag if you want users to be able to do this" - I click OK and it saves the .dwt page, but does not update any other .html pages.

I cannot answer your question(s), I have only hearsay experience, but I can offer some links on where to get information regarding Flash SEO...
http://www.seobook.com/archives/001457.shtml
http://www.flashseo.com/
http://blog.searchenginewatch.com/090317-120653
and the O'Reilly book: Search Engine Optimization for Flash by Todd Perkins, ISBN: 978-0-596-52252-0

I can't pass the icloud terms and conditions page after updating ios7

Hi, I need urgent help!
I can't pass the icloud terms and conditions page after updating ios7
I've tried agree disagree and every other button i could press but it just wouldn't go pass the page
Is there anyone who can help me with it?

There are several solutions you can try in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0.

I could not open to the front page after I put in the passcode that i used before i updated my ipod touch to iOS7

I could not open to the front page after i put in the passcode that I used before i updated my ipod touch to iOS7..................... please help me

What do you mean by "the front page"?

HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

Make sure iTunes on the computer is logged into the account on the phone.
Plug the iPhone in.
In the popup window warning about wiping your phone, hit cancel.
In the left pane of iTunes, the phone icon should be there.
Right click on it, select transfer purchases.
Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

Can't install Updater and view my HTML page online!

Hi all,
I do have the most recent version of Macromedia Dreamweaver
MX 2004 ver. 7.0.1. But I was trying to install the updater anyway.
As I was trying to install the Updater I received a Severe Error
message which says: "This folder does not contain Dreamweaver MX
2004." This happens when I choose the destination as to where I
should install the files. And I do have Dreamweaver installed on my
machine. Although I probably don't need the updater, I wanted to
install it because I am having problems viewing my html file (which
embeds an swf) when I upload it to the server. I can view it
locally but when I view the page online, it just hangs there
forever.
I sent my html file to someone else and she was able to
upload it to her server and when I viewed her source code, I
noticed that she had some JavaScript. When I asked her about it,
she said that the JS file that's in the html was automatically
added by Dreamweaver to overcome the Microsoft click to activate
limitation. The script writes the Flash embed code to the page
dynamically. That didn't happen for me, so I'm confused as why my
html page which embeds Flash can't be viewed online correctly.
Please help! Thanks!

"This folder does not contain Dreamweaver MX 2004."
That only means that it doesn't contain DW7.0 - which you
already know.
Since you have already updated to 7.0.1, this is the expected
error message
when you try to update again.
> it just hangs there forever.
Post a link to the page, please.
> I sent my html file to someone else and she was able to
upload it to her
> server and when I viewed her source code, I noticed that
she had some
> JavaScript. When I asked her about it, she said that the
JS file that's in
> the
> html was automatically added by Dreamweaver to overcome
the Microsoft
> click to
> activate limitation.
Not if you are using 7.0.1 it doesn't. A look at your page
would reveal
all, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"respondplease" <[email protected]> wrote in
message
news:[email protected]...
> Hi all,
>
> I do have the most recent version of Macromedia
Dreamweaver MX 2004 ver.
> 7.0.1. But I was trying to install the updater anyway.
As I was trying to
> install the Updater I received a Severe Error message
which says: "This
> folder
> does not contain Dreamweaver MX 2004." This happens when
I choose the
> destination as to where I should install the files. And
I do have
> Dreamweaver
> installed on my machine. Although I probably don't need
the updater, I
> wanted
> to install it because I am having problems viewing my
html file (which
> embeds
> an swf) when I upload it to the server. I can view it
locally but when I
> view
> the page online, it just hangs there forever.
>
> I sent my html file to someone else and she was able to
upload it to her
> server and when I viewed her source code, I noticed that
she had some
> JavaScript. When I asked her about it, she said that the
JS file that's in
> the
> html was automatically added by Dreamweaver to overcome
the Microsoft
> click to
> activate limitation. The script writes the Flash embed
code to the page
> dynamically. That didn't happen for me, so I'm confused
as why my html
> page
> which embeds Flash can't be viewed online correctly.
>
> Please help! Thanks!
>
>
>

UPDATING HTML PAGE AFTER UPDATING DATABASE

Similar Messages

Maybe you are looking for