Updating ipad and now being told to restore ipad
I plugged in my ipad to my computer to update ios7 and now my ipad is locked and telling me to restore my ipad
NO, you will have to restore from backup if you have one,
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
I did an update on my ipad and now I have to restore it but it says I will lose everything How can I get my pictures on there before I restore my ipad to factory settings?
They will be gone from the iphone, but you should be syning all contacts to your computer regularly and should be importing all pics to your computer regularly, particularly before any update.
Have you failed to do this? -
I swapped out my broken iPad for a new one, and went to sync in iTunes and only see my iPhone backups. Should I use those to back it up (most of the apps are the same across both, and same with the email, calendar, and contacts settings). Will that create problems if I use the same backup for two devices? Thanks!
No it will not create problems but if the iPad that you got is running an iOS less than what you are running on the iPhone, you will have to update the iPad first, before you can restore from the phone backup. You can't use the backup of a newer iOS on a device running an older iOS without updating the device first.
-
my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft copy of the ios on my windows pc. please how can i reload my ipad
Try using recovery mode
Recovery mode - Support - Apple -
I have some songs/interludes on my Garageband app on my Iphone. I was planning on using some for my bands album. Now my Iphone won't turn on and I'm being told to restore the phone. Have I lost all my Garageband songs?
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
Can someone help me. I am using an iPad mini with iOS 7.0.4 with wifi connection. Have had no problems until recently when I was unable to update apps and then noticed that some apps would open but no data would be available in apps like intelicast and Pinterest. I have restored the iPad and now I am unable to download any of my previously purchased apps.
1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo. -
I have a brand new iPad 4. I plugged in and it told me that there was new software available. I went to update it and now it tells me "unknown error 1656". Now the pad is in permanent recovery mode and I can't do anything with it. Any info?
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable
That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
i have updated my ipad and now it has a passcode that i have not set up so i do not not have the passcode to put in and now it is disababled! HELP!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I installed the most recent update to my iPad and now it is frozen on the "itunes logo plug in" screen. It won't shut down and restart. Fixes?
Try a Reset...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I just did an update on my ipad and now when it goes to sleep my ipod stops playing.
I just did an update on my ipad and now when I am listening to my music and the ipad goes to sleep the music stops.
KimRoberto wrote:
My 4s wants to do a restore and not just an update. Help. ...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
KimRoberto wrote:
I don't want to lose all my contacts and music. I'm ready to cry.
All this information should be on the computer you have regularly been Syncing and Backing up to...
See Restore from Backup here > http://support.apple.com/kb/ht1766 -
I downloaded and installed the latest update on my Ipad and now it will not power on. It shows I tunes and a power cord. What should I do?
Hey kfortnt2,
Thanks for the question. I understand you are experiencing issues after updating your iPad. The following resource outlines the screen you are seeing, and a potential resolution:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
Can't update my iPad and now stuck on connect to iTunes screen
My iPad 2 stopped half way through updating today and now is stuck on the connect to iTunes screen. I connected it to my computer, started the restore process, downloaded the update and then I got an error and it went back to the start again! I thought, "ok I'll just go find the file that was downloaded and retry installing it" only to discover that iTunes had deleted the 1.5 GB update it had just downloaded (it took my 2 hours and to top it off I have to pay extra for anything over 500MB I use per day...) Is there any other way to install this update or reset my iPad to factory settings without having to update it?
That screen means it has entered recovery mode and you can only restore by using the recovery mode instructions to connect to iTunes: http://support.apple.com/kb/HT1808 and summarized as:
Maybe you are looking for
-
I am working on an application and include a feature that allows users to hide a window by calling the javascript "focus" method. However, this does not work in Firefox when the user has the "raise or lower windows" setting turned off. Not a big deal
-
How can I get radio Scotland on bbc iplayer?
Can I bbc radio Scotland on iplayer on iPad?
-
Hi I have two tables employee empid empname empaddress valid Employeedetails empid empname manager I would like to validate empname from both the tables using case statement and empid as join and update 'valid' column in employee table to y/n. Please
-
I tried installing ColdFusion 9 and linking apache to the install. Because the Apache binary was 64bit I had to convert it to 32bit to for the ColdFusion install to work. I backed up the 64bit version and made the new 32bit version my httpd file. Aft
-
Issues AFTER installing owb patchset 10.1.0.3
Hello, I'm running into issues after upgrading OWB92 to 10G. Current setup: Server: OS - AIX 64-bit, OWB 10.1.0.1 Clients: XP(SP2) - OWB 10.1.0.3. Problem: can not connect to repository (10.1.0.1) - using Client (10.1.0.3). This started to happen aft