Updating packages compiled via ABS

Hey,
I've just setup Arch for the first time, all is great so far - however I have a question regarding packages that have been compiled via ABS. If I was to recompile Apache, what happens when a new version is out? Would a 'pacman -Syu' automagically re-compile the latest version with the different configure flags and/or patches I set, or do I have to manually re-compile again? If it is the latter, how do I know a new version is out (apart from checking the Apache site all the time)?.
Regards,

Allan wrote:You will have to recompile it yourself when a new version is out. If you don't want your own version to be replaced then add "IgnorePkg = apache" to your /etc/pacman.conf. pacman will print a message saying it is ignoring an update when one in the Arch repos is available.
Ok, quoting Allan here to clarify more confusion on the forums about this as of late.
Note that when making and installing a package using makepkg and ABS, the package will remain tracked by pacman. Pacman will then automatically upgrade the binary package when a newer version number is released into the repos.
A way around this is to use the IgnorePackage array in pacman.conf, and simply manually upgrade the package yourself (using ABS and makepkg).
Custom packages from 3rd party sources are tracked manually as are packages built by using AUR [unsupported] PKGBUILDS, though AUR helpers can automate this process.

Similar Messages

No modules found in kernel26 package compiled via ABS

Hi,
I have been experiencing problems building kernels recently. I've used ABS and AUR pkgbuilds to build kernels since 2.6.30, mostly to enable the proper USB scheduler for my hub and to try outside kernel patches, see kernel26-ck. However, since the release of 2.6.35.2, more likely a mere coincidence, I've been compiling small kernels (~4MB) from the default .configs without any modifcations to the PKGBUILDs or the config files. Looking at the compiled packages, I noticed the omission of the kernel modules that are normally located in /lib/modules/[kernelname]/kernel. The missing kernel modules obviously causes my machine to be unable to boot (https://bbs.archlinux.org/viewtopic.php … 15#p872215). My makepkg.conf is below. Any explanation on what is going on? Thanks
~$ cat /etc/makepkg.conf
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color !ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
OPTIONS=(strip docs libtool emptydirs zipman purge)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Directories to be searched for the strip option (if strip is specified)
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Last edited by ssri (2011-01-15 05:56:17)

Ran linpack and noticed that my CPU temp peaked at 74C, well below the critical threshold of 100C (according to intel). Usually, my CPU runs at arounr 48-55C unless I am doing some CPU-intensive task. When that happens, it will run up to the upper 70s.
~ $ cat /etc/lininput_xeon64
Sample Intel(R) LINPACK data file
Intel(R) LINPACK data
1 # number of tests
21000 # problem sizes
21000 # leading dimensions
20 # times to run a test
4 # alignment values (in KBytes)
# Change the problem sizes and leading dimensions to suite your free physical memory
# Memory use = 8 x (problem size)^2
# or
# Problem size = sqrt (memory use / 8)
# For 1 GB use a problem size and leading dimensions of 7000
# For 2 GB use a problem size and leading dimensions of 13700
# For 4 GB use a problem size and leading dimensions of 21000
# For 8 GB use a problem size and leading dimensions of 29600
~ $ cat lin_xeon64.txt
Fri Dec 31 21:30:38 PST 2010
Intel(R) LINPACK data
Current date/time: Fri Dec 31 21:30:38 2010
CPU frequency: 1.800 GHz
Number of CPUs: 1
Number of cores: 2
Number of threads: 2
Parameters are set to:
Number of tests : 1
Number of equations to solve (problem size) : 21000
Leading dimension of array : 21000
Number of trials to run : 20
Data alignment value (in Kbytes) : 4
Maximum memory requested that can be used = 3528424096, at the size = 21000
============= Timing linear equation system solver =================
Size LDA Align. Time(s) GFlops Residual Residual(norm)
21000 21000 4 666.408 9.2659 3.591869e-10 2.884103e-02

[SOLVED] Krusader compilation via abs error

I tried to compile Krusader using PKGBUILD from abs. I have base-devel installed, but I got in the end error:
Linking CXX static library ../../lib/libPanel.a
[ 76%] Built target Panel
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
Application is compiled via Cmake. Ive made litle research but couldn't find solution. Sorry for so few info but I don't really know what would you like more to be able to help, so please just let me know so I could deliver more information.
Thanks for any help!
Last edited by Eithrial (2012-06-25 17:05:10)

Eithrial wrote:I tried to compile Krusader using PKGBUILD from abs. I have base-devel installed, but I got in the end error.....
I tried your compilation from abs on my system and got your same build failure. I always build with the "--log" option to makepkg and in a case like this open the build log file and search for the error. There are lots of warnings about things like "unused parameter" "ignoring return value" and such. Find the first error. In your case I searched for the word "error" and came to a line with "error: ‘make_pair’ was not declared in this scope".
So enter that error into a google search (krusader error: ‘make_pair’ was not declared in this scope) and near the top of the list is a link to an Archlinux bug report page for the krusader package, https://bugs.archlinux.org/task/29429
There you find a Comment by Karol (Kudlaty) - Tuesday, 17 April 2012, 16:00 GMT
ok, compiling error fixed by changing:
make_pair => std::make_pair
There's your fix
The file with the error, from the build log, was src/krusader-2.4.0-beta1/krusader/UserAction/tstring.h (of course open that file and see where make_pair is used). The two invocations of make_pair need to become std::make_pair, so the fixed build function in our PKGBUILD becomes
build() {
cd "${srcdir}"
sed -i 's/make_pair/std::make_pair/' krusader-2.4.0-beta1/krusader/UserAction/tstring.h
mkdir build
cd build
cmake ../${pkgname}-${_pkgver} \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr
make
With the addition of that one sed line to the pkgbuild the krusader package now builds ok. Always run namcap on your built package: in this case namcap tells us that we got all of the dependencies right and the package looks ok.

Package compiling error

Hello,
So I"m continuing to study java and I've been trying to create my first package but I keep getting problems whenever compiling via my java editor (JGrasp) and when trying to compile via the command prompt. I was hoping somebody could help me understand what I'm doing wrong with the code or compilation process. Thanks in advance for any help anybody could provide. (oh as one other sidenote these problems started happening after i'd done this at the command prompt to try to compile as well javac -d C:\ Entertainment.java)
Josh
JGrasp compiler problems
----jGRASP exec: javac -g C:\Entertainment.java
----at: Jun 23, 2006 7:35:32 AM
----jGRASP wedge: pid for wedge is 2788.
----JGRASP wedge2: pid for wedge2 is 3476.
----JGRASP wedge2: CLASSPATH is ".;;.;C:\Program Files\Java\jre1.5.0_06\lib\ext\QTJava.zip;C:\Program Files\jGRASP\extensions\classes".
----jGRASP wedge2: working directory is [C:\] platform id is 2.
----jGRASP wedge2: actual command sent ["C:\javac.exe" -g C:\Entertainment.java].
----JGRASP wedge2: pid for process is 3496.
Can't determine application home
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
Actual program
import javax.swing.*;
package com.eventhandlers.entertainment2;
public abstract class Entertainment
protected String entertainer=("");
protected int fee=0;
public Entertainment()
setEntertainerName();
setEntertainmentFee();
public String getEntertainerName()
return entertainer;
public double getEntertainerFee()
return fee;
public void setEntertainerName()
entertainer=JOptionPane.showInputDialog(null,
"Enter Name of entertainer ");
public abstract void setEntertainmentFee();
}

Actual program
import javax.swing.*;
package com.eventhandlers.entertainment2;I don't know if it will solve your problem, but these two lines should be
the other way around, like this:package com.eventhandlers.entertainment2;
import javax.swing.*;IOW, the package statement (if present) should be the first statement
in your compilation unit (.java file).
kind regards,
Jos

Binding file to update package name issue

I'm trying to change the package name via a binding file, however I'm having issues. The schema within the WSDL is defined as a local schema rather than at http: How would I get the following to work? Thank you for your time
1) WSDL
<wsdl:definitions xmlns="..."
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" ...>
<xs:import namespace=""/>
<xs:import namespace="http://aaa" schemaLocation="a.xsd"/>
</xs:schema>
2) Binding file
<jxb:bindings xmlns:xs="http://www.w3.org/2001/XMLSchema" schemaLocation="a.xsb" node="/xs:schema">
<jxb:schemaBindings>
<jxb:package name="com.a"/>
</jxb:schemaBindings>
</jxb:bindings>
3) Output
a.xsb" is not a part of this compilation. Is this a mistake for ...

Hello,
You are creating your url using the SPList object "docLibrary" which is not providing you the url of the list, that's your error
here a sample to how upload file :http://blogs.msdn.com/b/peterj/archive/2008/01/23/creating-folders-and-adding-files-to-sharepoint-document-library.aspx
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Updated packages on Snow Leopard

I recently update my iMac 3.06 GHz IC2D Snow Leopard 10.6 to 10.6.2.
For some compatibility problem with Adobe CS3, I should re-format the HD without "Case sensitive".
For making a Clean install and not to have to download again Mac OS X Update Combined 10.6.2 (up to 500MB !) I would like to use the package already downloaded.
On previous version like Tiger, package s was keep in Packages folder. In Snow Leopard, I can't find it.
Any suggestion ?

cldjr wrote:
I recently update my iMac 3.06 GHz IC2D Snow Leopard 10.6 to 10.6.2.
For some compatibility problem with Adobe CS3, I should re-format the HD without "Case sensitive".
really?? I've heard many times that a number of adobe apps DO NOT work on case sensitive formatted drives. you might want to double-check this before reinstalling.
For making a Clean install and not to have to download again Mac OS X Update Combined 10.6.2 (up to 500MB !) I would like to use the package already downloaded.
On previous version like Tiger, package s was keep in Packages folder. In Snow Leopard, I can't find it.
Any suggestion ?
downloaded update packages are not kept in snow leopard if you do it via software update. if you want to keep it download it by hand from the apple website.

Compile via object browser gives ORA-01031 insufficient privileges but...

Hello,
Last week I upgraded my APEX version from 2.2 to 3.01; I didn't find any problems up to now. Via the home>SQL Workshop>object browser screen, packages then edit package I modified a package. When I hit the 'compile' button, I got the message: ORA-01031: insufficient privileges.
When I do 'alter package <package_name> compile [body]' via the home>SQL workshop>SQL commands screen the package is compile succesfully.
To me this looks like a bug... same (apex) user, same priviliges...
Has anybody an idea why I can't compile via the object browser screen, receiving the ORA-01031 message, but why I can compile the same package via sql-commands screen.
The user I am logged on with in APEX is the owner of the package.
Thanks in advance for your assistance.
best regards,
Jan.
Message was edited by: jan
J. Hulsing

Linda,
Connect as SYSTEM and:
grant create procedure to XXXXXXX;
...where XXXXXXX is the schema name. A DBA would need to do this, of course.
Scott

Scripts I use to update my system from ABS

Banged some scripts together to update from ABS and sharing them cause I like them - they work together or separate.
gather abs directories into ~/abs directory:
#!/usr/bin/perl
my @upgradelist;
system ("sudo pacman -Sy");
system ("sudo abs");
open FH, "pacman -Qqu |";
while (<FH>){
chomp $_;
if (-d "/var/abs/core/$_") {system ("cp -R /var/abs/core/$_/ /home/poiuyt/abs/ ");}
if (-d "/var/abs/community/$_") {system ("cp -R /var/abs/community/$_/ /home/poiuyt/abs/ ");}
if (-d "/var/abs/extra/$_") {system ("cp -R /var/abs/extra/$_/ /home/poiuyt/abs/ ");}
DL and make the ABS packages from the ~/abs directory:
GNU nano 2.2.6 File: makepackages.pl
#!/usr/bin/perl
$absdir = $ENV{"HOME"}."/abs";
opendir (DIR, $absdir);
my @directory= readdir(DIR);
my $workingdir;
foreach (@directory){
# if ($file =~ m/^\./){
$workingdir = $absdir."/$_";
print "calling makepkg on $workingdir\n";
chdir ("$workingdir") or die "can't change directories";
system ("makepkg");
install packages in abs directory:
GNU nano 2.2.6 File: install.pl
#!/usr/bin/perl
$absdir = $ENV{"HOME"}."/abs";
opendir (DIR, $absdir);
my @directory= readdir(DIR);
my $workingdir;
foreach (@directory){
# if ($file =~ m/^\./){
$workingdir = $absdir."/$_";
print "calling pacman on $workingdir\n";
chdir ("$workingdir") or die "can't change directories";
system ("sudo pacman -U *.pkg.tar.xz");
Feel free to comment or improve as I willingly admit I am a crappy coder.
EDIT : My bad code was corrected - sorry was working on it today
Last edited by poiuyt23 (2013-12-17 05:35:21)

Don't use pacman -Sy, use checkupdates
Don't run abs as root, use $ABSROOT, also you cam tell abs just what packages to download. As a sidenote, abs is often out of date, the gir repo is prefered.
And there already are several existing tools to build/update from abs, why not use one of those?

Can you identify which MS Update package contains build 34238

We discovered that a recent update had broken some code and we're trying to pin down which update was the culprit. We have a fix, so that isn't the issue. The issue is that the software is being used by clients and we would like to warn them not
to apply the Microsoft Update until after they have applied our fix.
What I know is that Build 34209 runs the code with no errors, however machines with build 34238 (.net 4.0.30319.34238) has the issue. So, if anyone can let us know which update this build is found int, we can warn our customers.
Thanks
Stuart Hunt

Hi Stuart Hunt,
I do not have any documentation off hand to identify which update package contains MSBuild 34238, however I would like to know is there any relationship with MSBuild? MSBuild is only used to compile applications base on the configurations, will MSBuild version
effect compile result?
Besides if you think the .net 4.0.30319.34283 is the issue, you could include some previous version of dll in your project package and use these dll instead of using system dlls.
Some of my research on the Internet pointed to KB3004394 (Not that sure), I would suggest you to have a check. But not sure, you may need to get a confirmation from:
http://answers.microsoft.com/en-us/windows/forum/windows_update?tab=Threads
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Update key mapping via web service

Hi ,
I have a question about edit key mapping. The problem is that we create vendors in MDM and syndicate them to different ERP systems. To decide which system a new vendor/changes must be send to, I need the Edit Key Mapping, but the users do not want to enter this information manually and I do not see how I can create key mapping automatically.
We are working on a new solution where vendors are entered in sharepoint and updated in MDM via web services. I would like to know if one of you know if key mapping can be maintained via a web service.
Kind regards
Jonna

Hello,
You may use the document,
[MDM PI via Web Service Key Mapping|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0812356-e62f-2c10-76aa-9a02d038ba81]
Hope this helps your scenario
Regards,
Abhishek

Root partition suddenly full while updating packages with Pacman

Hello
I'm not sure if this is a problem with Pacman, but my root partition seems to have become completely full while updating my system using pacman -Syu. Before updating anything, there seems to have been an update to a new version of Pacman (3.3.1-1) that needed to be installed before updating packages.
In the middle of the updates, I got this error:
error: error writing to file '/var/cache/pacman/pkg/openoffice-base-3.1.1-2-x86_64.pkg.tar.gz': No space left on device
Also, I don't know if this is related, but I got a lot of 'not found' errors after that.
The entire output from everything:
~ $ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core 34.6K 101.4K/s 00:00:00 [#####################] 100%
extra 427.5K 394.3K/s 00:00:01 [#####################] 100%
community 374.7K 362.2K/s 00:00:01 [#####################] 100%
:: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
Targets (1): pacman-3.3.1-1
Total Download Size: 0.60 MB
Total Installed Size: 2.10 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
pacman-3.3.1-1-x86_64 618.9K 455.6K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading pacman [#####################] 100%
~ $ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (42): taglib-extras-1.0.1-1 qt-4.5.3-2 liblastfm-0.3.0-4
loudmouth-1.4.3-1 libmtp-0.3.7-1.1 amarok-2.2.0-1 apr-1.3.9-1
db-4.8.24-1 apr-util-1.3.9-3 apache-2.2.13-3 bluez-4.54-1
python-2.6.3-1 dbus-python-0.83.0-2.1 device-mapper-2.02.53-1
eclipse-3.5.1-1 gpm-1.20.6-3 perl-5.10.1-3 groff-1.20.1-3
vim-7.2.266-1 gvim-7.2.266-2 heimdal-1.2.1-7 inkscape-0.46-13
iproute2-2.6.29-2 lib32-db-4.8.24-1 lib32-heimdal-1.2.1-7
libical-0.44-1 libsasl-2.1.23-2 lm_sensors-3.1.1-2
lvm2-2.02.53-1 nexuiz-data-2.5.2-1 nexuiz-2.5.2-1
redland-1.0.9-4 openoffice-base-3.1.1-2 pam-1.0.4-2
php-5.3.0-5 pstoedit-3.50-1 ruby-1.9.1_p243-2 soprano-2.3.1-1
texlive-bin-2009.4-1 texlive-core-2009.15574-1 wget-1.12-1
xchat-2.8.6-5
Total Download Size: 1354.95 MB
Total Installed Size: 2035.02 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
db-4.8.24-1-x86_64 4.7M 432.0K/s 00:00:11 [#####################] 100%
device-mapper-2.02.... 479.0K 287.9K/s 00:00:02 [#####################] 100%
gpm-1.20.6-3-x86_64 173.2K 243.7K/s 00:00:01 [#####################] 100%
perl-5.10.1-3-x86_64 13.5M 412.5K/s 00:00:33 [#####################] 100%
groff-1.20.1-3-x86_64 4.1M 365.7K/s 00:00:12 [#####################] 100%
heimdal-1.2.1-7-x86_64 2.8M 368.5K/s 00:00:08 [#####################] 100%
iproute2-2.6.29-2-x... 489.0K 303.8K/s 00:00:02 [#####################] 100%
libsasl-2.1.23-2-x86_64 118.5K 252.4K/s 00:00:00 [#####################] 100%
lvm2-2.02.53-1-x86_64 930.3K 327.3K/s 00:00:03 [#####################] 100%
pam-1.0.4-2-x86_64 537.8K 289.5K/s 00:00:02 [#####################] 100%
wget-1.12-1-x86_64 672.4K 308.0K/s 00:00:02 [#####################] 100%
:: Retrieving packages from extra...
qt-4.5.3-2-x86_64 26.9M 418.8K/s 00:01:06 [#####################] 100%
liblastfm-0.3.0-4-x... 223.4K 252.0K/s 00:00:01 [#####################] 100%
loudmouth-1.4.3-1-x... 80.8K 183.8K/s 00:00:00 [#####################] 100%
libmtp-0.3.7-1.1-x86_64 439.4K 309.5K/s 00:00:01 [#####################] 100%
amarok-2.2.0-1-x86_64 10.9M 486.0K/s 00:00:23 [#####################] 100%
apr-1.3.9-1-x86_64 328.5K 332.4K/s 00:00:01 [#####################] 100%
apr-util-1.3.9-3-x86_64 237.6K 322.3K/s 00:00:01 [#####################] 100%
error: failed retrieving file 'apache-2.2.13-3-x86_64.pkg.tar.gz' from archlinux.unixheads.org : Connection timed out
error: failed retrieving file 'apache-2.2.13-3-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'apache-2.2.13-3-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
bluez-4.54-1-x86_64 671.6K 361.7K/s 00:00:02 [#####################] 100%
python-2.6.3-1-x86_64 15.2M 442.0K/s 00:00:35 [#####################] 100%
dbus-python-0.83.0-... 177.4K 225.6K/s 00:00:01 [#####################] 100%
eclipse-3.5.1-1-x86_64 162.0M 457.1K/s 00:06:03 [#####################] 100%
vim-7.2.266-1-x86_64 8.6M 437.9K/s 00:00:20 [#####################] 100%
gvim-7.2.266-2-x86_64 1115.4K 216.9K/s 00:00:05 [#####################] 100%
inkscape-0.46-13-x86_64 18.4M 464.6K/s 00:00:41 [#####################] 100%
libical-0.44-1-x86_64 281.3K 283.7K/s 00:00:01 [#####################] 100%
lm_sensors-3.1.1-2-... 133.2K 228.9K/s 00:00:01 [#####################] 100%
redland-1.0.9-4-x86_64 307.4K 275.7K/s 00:00:01 [#####################] 100%
error: error writing to file '/var/cache/pacman/pkg/openoffice-base-3.1.1-2-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'openoffice-base-3.1.1-2-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'openoffice-base-3.1.1-2-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/php-5.3.0-5-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'php-5.3.0-5-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'php-5.3.0-5-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/pstoedit-3.50-1-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'pstoedit-3.50-1-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'pstoedit-3.50-1-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/ruby-1.9.1_p243-2-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'ruby-1.9.1_p243-2-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'ruby-1.9.1_p243-2-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/soprano-2.3.1-1-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'soprano-2.3.1-1-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'soprano-2.3.1-1-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/texlive-bin-2009.4-1-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'texlive-bin-2009.4-1-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'texlive-bin-2009.4-1-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/texlive-core-2009.15574-1-any.pkg.tar.gz': No space left on device
error: failed retrieving file 'texlive-core-2009.15574-1-any.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'texlive-core-2009.15574-1-any.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: error writing to file '/var/cache/pacman/pkg/xchat-2.8.6-5-x86_64.pkg.tar.gz': No space left on device
error: failed retrieving file 'xchat-2.8.6-5-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'xchat-2.8.6-5-x86_64.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
warning: failed to retrieve some files from extra
error: failed to commit transaction (File unavailable (e.g., file not found, no access))
Errors occurred, no packages were upgraded.
~ $
Also, I haven't restarted my system yet. Should I try and see what happens?
Thanks!

This happened to me recently. I could not restart my laptop properly due to lack of space on my root partition.
The error during boot was along the lines of:-
Starting D-BUS system messagebus - Failed
Failed to start message bus: Failed to close "var/run/dbus.pid": No space left on drive
Hardware Abstraction Layer - Failed
everything else during the boot was as normal till I started to type in my username - but couldn't because the keyboard was inactive.
I used a Wolvix live CD to investigate and found a QT4 file in the packman cache which was 6.9GB in size (compared to the normal 27mb size). Once that was deleted and the drive/partition error checked everything was back to normal. So before you reboot I would definitely recommend clearing any oversize file out of your packman cache, or just clearing the whole cache.
Last edited by Nixie (2009-10-05 17:16:13)

HT4623 I tried updating to iOS6 via itunes bc my storage space was pass limit and now my phone is telling me it's in recovery mode and I need to restore it. I didn't back it up. How do I take it out of recovery mode and keep the information on my phone?

I tried updating to iOS6 via itunes bc my storage space was pass limit and now my phone is telling me it's in recovery mode and I need to restore it. I didn't back it up. How do I take it out of recovery mode and keep the information on my phone?

You cannot. If it is in recovery mode, the data is already gone.
Did you fail to make sure everything was on your computer before updating?

Information about updated packages

Often when I update my system I want to know what changes have been made to a specific package. Does arch have this information somewhere? On other distros there are places you can look up what the new changes are to a package. It would be good to know if the updated package is just a new build from upstream, a change in the configuration, or a patch to fix some security flaw. For certain things like kernel updates or binutils I can get paranoid upgrading and would just like to read some change log.
It seems like the most logical places for this in my mind would be a flag to pacman when doing -Suy or perhaps information about the update on the RSS feed for new packages.

f4hy wrote:The -Qc option is great for the limited packages that have changelogs, but at that point it is a bit too late. It would be nice to know what will be changed BEFORE upgrading the package. A flag to pacman to give the equivalent of -Qc but for --sync would be nice, unfortunately -c is already used :-\
You can query packages before they are installed, you just have to point it to a file with -Qcp.
The file must be local, which means downloading it first.
[fp@oscar ~]$ pacman -Qcp `sudo pacman -Sup|grep -e ^http`
error: package "http://mirrors.gigenet.com/archlinux/core/os/i686/dhcpcd-4.0.10-1-i686.pkg.tar.gz" not found

RE: DataField, update underlying data via TOOL,Express

John,
does it work if you mix the "CopyfromClipboard" method with the "PlaceValueinDisplayedField" ?
If this is not the correct solution to you problem, could you please specify "where" it does not work ?
Thanks a lot indeed.
Best regards
/Stefano
Stefano POGLIANI Forté Software Consultant
E-Mail : [email protected] Tel : +33.0)450201025
Fax : +33.(0)450200257 Mobile : +33.(6)08431221
Visit the Forté Web Site : http://www.forte.com/
Ducunt fata volentem, nolentem trahunt....
-----Original Message-----
From: John Hodgson [SMTP:[email protected]]
Sent: Wednesday, July 02, 1997 8:39 PM
To: [email protected]
Subject: DataField, update underlying data via TOOL, Express
In TOOL code we PasteText() into a DataField, but the underlying data
object does not get updated until the user interacts with the GUI.
That causes problems if we need to use the underlying data object's
value immediately after the paste. How can we:
force an update of the underlying data object and
ensure that the update goes through before our method call returns,
i.e., ensure that if the update is via Forte events, those events
are handled before returning.
The context is a calendar lookup button that pastes into an adjoining
DataField.
John Hodgson |Descartes Systems Group Inc.|[email protected]
Systems Engineer|120 Randall Drive |http://www.descartes.com
|Waterloo, Ontario |Tel.: 519-746-8110 x250
|CANADA N2V 1C6 |Fax: 519-747-0082

Well, I think I have answered my own question, but I will leave it here in case anyone else has the same problem.
So, as far as I have been able to track down, it all went wrong when I was running through the connection wizard.
Under the section titled "Creating the Data Source" is describes how to find your database file and create the appropriate connection string. However, on my version of VS Express 2010 . It offered me a prompts , saying something like, "would you like to
move this database file into the application directory and change the connection string" this sounded very sensible to me, so I said yes.
All proceeded accordingly. And the database file now appeared in the solution explorer.
The app config file said that the connection string was
Data Source=|DataDirectory|\Database1.sdf"
I presumed this would be interpreted correctly by the rest of the app, as it was generated by VS.
But it didn't, what I cannot understand is how no error was generated. And data seemed to pull
into the bound controls.
But I have been testing it for a while now. and it seems that if I manually override the config file with the actual directory where the file exists , then there is not a problem. Data is retained in the file
This is more of a VB.net question, but I couldn't find it in the drop down. I will try and move it there now
Thanks guys for your patience.
p.s. RSingh , the code I posted above did come from the SaveItem_Click event
handler

Problem with update packages MDT

Hi, when i build boot image with update packages the mdt it give me a error
Error: 0x800f081e
The specified package is not applicable to this image.
Exit code = -2146498530
The wim file is take from win 7 italian iso x64, the updates I push in mdt are the same that I install on test machine with italian iso.
I think the problem is in some script of mdt when "update deployment share"

The only update that I recall being required for WAIK 3 was the advanced format drive patch (Unless you have the WAIK 3.1 update in which case it is unneeded).
So can you post the output that is failing? Specifically when you choose Update Deployment Share and it is building the boot wims can you select 'Save Output' and post that output here?
What version of MDT are you using?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Updating packages compiled via ABS

Similar Messages

Maybe you are looking for