Updating the sequence number on import?

OK, this is probably and oldie, and obvious to the informed observer, but I looked out on the web and in here, and apparently I"m not asking the right question 'cause I didn't find the answer:
When doing an import into Lightroom, I can rename the files. As part of the rename I'm incorporating
a sequence number. I can set the Start Number, BUT once I"ve imported the files, how do I get the
Starst Number AUTOMATICALLY updated so on the next import it starts at the new value?
AND, have it retained betwen sessions? I don't want to have to run around finding the Start Number the
next time I start Lightroom...

Ok, I think I have found out what is going on and have answered my own question.
The 'Import #' and 'Image #' use the entries from catalog settings ONLY if you are importing pictures.
It does NOT work if you are using 'File / Rename Photo'.
In that case, they always seem to start at 1.
It doesn't sound like the logical way to function, but at least I think I have a handle on it now.
Gary

Similar Messages

T.code S_ALR_87100833: in the aouput list the sequence number ...

Hi All,
launching the tax report by t.code S_ALR_87100833, in the output list the sequence number is linked to the tax code. Instead, I need it depends on the number of document listed.
Any suggestion for me?
Thanks
Gandalf

hi,
Advance return for tax on sales on purchases
enter c.code 1000
Fiscal year 2008
general selections
posting dates 01.04.2008 to 31.03.2009
Select Further Selections tab
1. Tax on sales purchases Codes select multipl selection
enter ur output tax code or input tax code
than excuite
2.Transaction select multiple selection
enter ur output tax Account Keys or Input tax Account keys
than excuites
next again Excuites
than see ur advance tax out put or input tax reports
this is the way for advance tax retuns
ur problem not understood
path : easy access - accounting - financial accounting - general ledger - reporting - Tax reports - general - advance tax returs on sales and purchases - s_alr_87012357 advance tax on sale and purchases
regards,
janakiram

The sequence number when exporting should represent stacks

When exporting images, I would like the sequence number to apply to the first image in a stack, but the rest of the images in the stack should have the same number as the first one but with an extra suffix. Something like this:
stack 1:
DSCN0010.DNG
DSCN0011.DNG
DSCN0012.DNG
stack 2:
DSCN0013.DNG
DSCN0014.DNG
When exported, I would like them to be:
DSCN0010.DNG --> "image-01.jpg"
DSCN0011.DNG --> "image-01b.jpg"
DSCN0012.DNG --> "image-01c.jpg"
DSCN0013.DNG --> "image-02.jpg"
DSCN0014.DNG --> "image-02b.jpg"

Hi,
The numbers in a CREATE SEQUENCE statement are all literals; no other kinds of numeric expressions are allowed.
You need dynamic SQL to do anything like what you want. For example:
COLUMN     seq_start_col     NEW_VALUE seq_start
SELECT     1 + MAX (val)     AS seq_start_col
FROM     table_x;
CCREATE SEQUENCE TEST_SEQ.NEXTVAL
START WITH &seq_start
MAXVALUE 9999999999999999999999999999
MINVALUE 1
NOCYCLE
CACHE 20
NOORDER;

Scanner(Warning) : 027: Unable to read the sequence number from the Workstation object.

Hi
We are having trouble storing inventory scans from some workstations.
We have a windows ONLY environment, with middle tier servers. (ZEN65SP1,
W2KSP4).
Some workstations are storing fine. The Storer function is working and we
can see the storer functions for the 'good' workstations in the Inventory
service window.
However some workstations can't store to the inventory db, but DO populate
eDir ZENworks inventory 'minimal information' but show "Scanner(Warning) :
027: Unable to read the sequence number from the Workstation object." in
the Scan Status...
The Inventory service window shows no attempt by these workstations - it's
almost as though the scan file is not arriving (though eDir knows/displays
the scan file name)
How does the workstation access the scandir in Windows only/middle tier
environment? Does the scan xml stream get sent to the MT via http and then
on to the scandir via CIFS?
Any suggestions/explanations welcome!!
Many thanks
David

David,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

027: Unable to read the sequence number from the Workstation object

Environment:
NW 6.5 sp4
Zen 6.5 sp1
We had a problem with our inventory server processing .STR files a couple
months ago - had to turn off inv. policies on workstations while we resolved
it. Now it's resolved and we're running inventory again. We have a large
number of workstations reporting this error:
027: Unable to read the sequence number from the Workstation object
They have no data in the DB, although they do have minimal scan info, and
the last scan status date matches that of the sequence number error.
I've seen this sporadically in the past and have been able to resolve it by
initiating a full scan on the individual workstation. However, that does
not seem to be making a difference this time.
Novell's troubleshooting document basically says see if the server's
running, and see if there's data for the workstation in the db. Then call
tech support.
Any other ideas?
~~~Nicoya...

Jared wrote:
> Nicoya Helm,
>
>> 027: Unable to read the sequence number from the Workstation object
>
> I am thinking that this can also mean a previous full scan was not
> found. Or maybe the STR file name is bad.
>
> This information is stored here
> HKEY_LOCAL_MACHINE\Software\Novell\Workstation
> Manager\InvScanner\"STRFileName"
The machines I'm troubleshooting have valid formats for their STR names,
but that doesn't necessarily mean they are valid STR sequence numbers.
Does removing the value in the reg key cause the STR file name to be
recreated?
>
> Because imaging is used, it's possible that this information is matching
> on some machines which could cause problems.
I've verified that none of our images contain the c:\zenworks history
folder, and we run a script that cleans up any zenworks items before
sysprep (i.e. makes sure there's no registration info on the
workstations, etc). Our imaging scripts also clear any ZIS info to
avoid any duplication as well, so I don't think imaging would be causing
this.
> I believe 6x also has a hist.ini file like 3x inventory does, you might
> delete the file also.
Good tip about the hist.ini file, I didn't know about that. It does not
solve the sequence number error, but it does seem to force a full scan
of the system and cause the new scan to be stored in the DB, which was
not happening before.
Thanks!

How can i update the phone number associated with my iMessage and FaceTime on my macbook air?

I recently moved to the US from Canada and have a new US #. I have updated the phone number on my apple ID but the iMessage and FaceTime on my macbook air are still connected to my old Canadian phone number. How can I update this? Thanks so much!

Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
          Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
          Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
          Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test.
Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

How to update the telephone number for a contact person in VAP2.

hi,
I want to update the telephone number for a particular contact person in VAP2 from custom transaction. I tried for BDC,
but it was not updating. Could you plz any one help to solve this issue.

Try these bapis;
BAPI_CUSTOMER_CHANGEFROMDATA
BAPI_CUSTOMER_CHANGEFROMDATA2
BAPI_ADDRESSORG_CHANGE
or BAPI_ADDRESSPERS_CHANGE
Edited by: deniz kaylan on Apr 30, 2010 8:55 AM

How to change the sequence number in the test packages?

Hello,
I need to change the sequence number in the test packages. Currently I use "move test case." However you can only move one item at a time.
There is another option to make this change?
Best regards,
Elisabete

Hi Elisabete,
Sorry, I've to acknowledge the reply from Fabricius.
That's poor in release 7.0. A former version provided a solution where it was possible to move a testcase even over pages at once. May be SAP changed this functionality because of other problems caused by the former solution.
Therefore I am looking for a business blueprint structure meeting the logical and operational process for little need of changes in sequences. And I create E2E-scenarios / E2E-processes as an additional structure in a project to have an easier approach in the Test Workbench. An other option is to divide test packages into smaller ones.
I hope we can look foreward to a better and more comfortable solution in release 7.1.
Best regards,
Adelbert

LC 8.0 Win2003server installation with turnkey. how to update the serial number

good morning
could anybody give me an idea howw to upadet the serail number of a trial version of livecycle 8.0. adobe gave me a LC 8.0serial number. the serial number had expired. I update it with configuration manager with a new serial number , adobe gave me, it worked. but immediatly after i updated th e8.0 version with the sp2 of LC 8.0. and the serial number went back to th eold one. and when i try the configuration manager , i gave me no screen wher i can update the serial number.
help me please.
best regard.
JPW

good morning
could anybody give me an idea howw to upadet the serail number of a trial version of livecycle 8.0. adobe gave me a LC 8.0serial number. the serial number had expired. I update it with configuration manager with a new serial number , adobe gave me, it worked. but immediatly after i updated th e8.0 version with the sp2 of LC 8.0. and the serial number went back to th eold one. and when i try the configuration manager , i gave me no screen wher i can update the serial number.
help me please.
best regard.
JPW

How to update the track number for my ipod ?

hello guys
i got an ipod photo
i already transfer lots of mp3s into the ipod
but some of the song arent list in the correct order
seems like i have to update the track number
can i do it automatically with itunes ?
maybe there is an option to do this with the 'music store' function ?
or do u guys have any other suggestion instead of manually update the track number?
hope u guys will help me
thx

Well you use iTUnes to organize your music on the PC and the iPOd. If these songs are in a playlist, you need to open that playlist in iTunes and organize it by the headers.

Unable to update the serial number through bdc in Sales Order

Hi experts,
I written the inboud FM for to update the 3rd party items serial number to the sales orders through BDC Call transaction Method.
Here i am facing a problem when i have the 19 item Quan ,it is updating correct through idoc , when ever there is moe than 19 and at that if any serial number repeated for that if i am changing at that time it is loosing the control of the BDC and giving the control to the salesorder screen.
how can i handle that control again has to come to BDC prgrm......
Thnks,
Regards,
Bharani

Hi,
Can you please let me know the segment in ORDERS05 Idoc to process the Payment card information and if the standard Function Module can handle the creation of a Sales Order with data for Payment Card.
We have a requirement to map the Tokenized Number of the Credit Card send from a store front end to ECC mapping via SAP-PI.
Thanks in Advance,

How to pass the sequence number of current loop in a for loop in FPGA vi to the host

PCI-7830R
LV 8.2
What I was trying to do is to use multiple DIO to generate pulse at different sequence. Mode one is to automatically sweep from DIO1 to DIO20; mode 2 is several DIOs generate pulse simoutaneously. So I use a case structure to make the selection, in the mean time, I set up two for loop in each case so that I can use multiple pulse generations. For example, in scanning mode, if I set 2 exposures, it sweeps from 1 to 20 then do it again.
Then I need to get the loop sequence number, i of each scenario. So I put an indicator within the first loop, and create a local variable of it and put in the second one. Running the FPGA vi alone, I can see the indicator change in each case from 0 to N-1, N being the for loop time.But in the host vi, I tried to add this indicator as an element in the read/write invoke method, in the debugging mode, I could only see it directly jump to N-1 without all the changes I saw in FPGA vi.
Is it possible to get this number passed correctly from FPGA vi to the host vi? Thanks

Thanks for the reply Jared.
Excuse me if it looks incorrect, but I'm new to FPGA programming, so I would have to look into the FIFO you referred to. I used local variables because for one thing I have several different cases containing for loop in each of them, and I only want one indicator for the "i". If I put the indicator out of any for loop, it's only gonna show the last number which is N-1. For the other thing, it seems like property nodes are not allowed in FPGA vi. And by doing this, I can see the i number changing from 0 to N-1 in each case, well, in FPGA vi's front panel. But while I ran the host vi with everything, the indicator in host vi's front panel only showed the last number N-1. It may be the reason you said, it happened too fast before the indicator in host vi can catch it.
What I want to realize is to group the data I collect in host vi, for example, when I choose multiple exposure in each mode, and the FPGA runs 1 through 20 then do it again, I want the data stored in two groups using the loop sequence number as the seperator in file name. So it goes like 1-1, 2-1.......20-1; then 1-2, 2-2,.....20-2.

Updating the Line number on status bar.

Hi all,
I have developed an editor using swing, however I have used the JTextpane class to display the text. I had did of trouble with features such as go to line as this class does not support methods such as getLineCount in the JTextArea class. However I over came this by writing the method shown below.
The problem is that I want to show the current line number on the status bar. When do I call this method? After every '\n'?
The setLine Number method is below.
Thanks for your help
Ciara
public void setLineNumber(int num) {
int lineNum = 1;
int lastNewline = 0;
char text[] = editor.getText().toCharArray();
if (num < 1)
return;
if (num == 1) {
editor.setCaretPosition(0);
return;
int i;
for (i = 0; i < text.length; i++) {
     if (text[i] == '\n') {
     lastNewline = i;
     lineNum++;
     if (num == lineNum) {
     editor.requestFocus();
     editor.setCaretPosition(lastNewline + 1);
     return;
}

Perhaps extending a PlainDocument is better, if line
numbers are meaningful for your application.
About your method, mind that getText can be quite dear,
so it is better not to call it if you don't need it.
For a more efficient alternative, look at Document.getText(int offset, int length, Segment txt)It uses a Segment (un unguarded string) pointing directly
into the document, which you can use much like a char
array.
As to your question, I would define a CaretListener
so as to update the status bar when the caret moves.

JDBC to IDOC scenario and database update the idoc number

Hi SDNers,
I am willing to pull data from a database table to generate IDOC in SAP and want to update the DATABASE with IDOC number in a single scenario.
Kindly suggest ?
REGARDS!!
SSR

Hi,
Please keep in mind that the idoc no generated in PI will be different than the one generated in SAP...for idoc...
the correlation between the idocs in both systems is the message id...
HTH
Rajesh

Report S_P00_07000134 is not updating the certificate number

Hi All
We are implementing extend wht for one of company in qatar and as SAP doesnt provide the country solution for Qatar.
While running the generic withholding tax report for updating certificate number.
My understanding is that with this report we can print the certificate for vendors and the same would be updated in WITH_ITEM table. however when I run the report it showz correct value but the certificate number is not generated
The setting made so far in SPRO
In the tax type calculation i have check (selected) the tab for No cert numbering
In the spro--> Genric withholding tax reporting --> Define certificate numbering for extended withholding tax
this two config is done..
please advise
chrs
priyanka

HI
please refer the below notes
1304883 1273403
Reg
Madhu M

Updating the sequence number on import?

Similar Messages

Maybe you are looking for