Updating the Service Patch level

Dear Friends,
We are updating the service patch level of EP 7.0. It wil be EHP1 (sp05).
So do we need to bring other intigrated system to this level,system like BI,SAP HR,SAP DMS etc ?
Regards,
Devesh

Hi
In general yes,
for example, if you using ESS / MSS scenarios, thes levels on the portal must be leveled with HR support packages on R/3.
best regards,
Ricardo Caramona

Similar Messages

Error in phase XPRA_EXECUTION while updating the SAP_BASIS patch !4

Hi ,
I am trying to update the sap_basis patch from level 13 to 14 . While updating I am getting
Error in phase: XPRA_EXECUTION
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package SAPKB70014, tp step R, return code
0012
In ST22 It says Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
any help would be appreciated..
Regards,
Pradeep

This is what I get in the import log
The Syntax Error is given below
Execution of programs after import (XPRA)
Transport request   : SAPKB70014
System              : DEV
tp path             : tp
Version and release: 372.04.59 700
Program terminated (job: RDDEXECL, no.: 17163300)
    See job log
Execution of programs after import (XPRA)
End date and time : 20090518171648
Ended with return code: ===> 12 <===
untime Errors         SYNTAX_ERROR
Date and Time          18.05.2009 17:16:34
Short text
Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CP " in include
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CM00D " in
line 1:
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_CLS_ATTR_VALUE_ASSIGNMENT==CP :
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.

What is the latest patch level for SAP CRM 7.0

Hello Experts,
I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
Thanks,
VSK

> I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
http://service.sap.com/patches
--> SAP Application Components
--> SAP CRM
--> SAP CRM 7.0
--> Entry by Component
--> CRM Application Server ABAP
--> SAP CRM ABAP 7.0
--> Support Packages
Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
Markus

How do I see the Kernel patch level in Java ONLY instance?

Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor

I'm trying to load avira free mac security, and am told i am not on patch level required, to update to latest patch level, what to do?

i'm trying to load avira free mac security and am told i am not on the patch level required, to update to latest patch level, what to do?

afickera wrote:
i'm trying to load avira free mac security ...
Please See Here > Antivirus Discussion
More Info Here > http://www.reedcorner.net/mmg/

User Exit or BADI to update the service order in R/3

Hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1. Planner Group
2. PMActType Plant maintenance activity type
3. Cost/Profit Centre
4. WBS element
5. Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ramana

Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph

Alternative option to updating the services file on the local computer

Hi,
Our project needs to add updates to the file C:\windows\system32\drivers\etc\services in order to allow excel reports to work from the SAP enterprise portal.
The client will need to apply this change in the services file to all the desktop computers of the end-users. They are now asking whether there is an alternative solution to updating the services file on the local machine. Our team does not think that there is one but maybe one of you experts out there can provide some more insight.
Any help would be greatly appreciated.
Thanks.
Best Regards,
Giwan Persaud

For our normal sapgui rollout we never change the services file.
This is only possible if you change in saplogon.ini the MSSrvPort section, the names to numbers:
instead of
Item88=sapmsPS1
you use
Item88=3600
Then you don't need the services file ( excepte the standard ones which you can rollout once )
sapdp*
sapgw*
you to check if this works for Excel also!

User Exit or BADI to update the service order

hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1.     Planner Group
2.     PMActType Plant maintenance activity type
3.     Cost/Profit Centre
4.     WBS element
5.     Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ram
Message was edited by:
        RAMANA MYLAPALLI

Best Possible way is.
go to se24 -> type in CL_EXITHANDLER -> Go to get_instance method.
Put a breakpoint on CALL METHOD cl_exithandler=>get_class_name_by_interface.
Now run the transaction and check which all BADI and user exits are invoked when u call the transaction.
Idenitfy the BADI which can be useful to you.
Reward if u find it useful.
Thanks
Kartavya

How to update the dps patch to my current Adobe CS6

how to update the dps patch to my current Adobe CS6

http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml
Neil

Which is the stable patch level for 2005-B after PL 25.

Which is the stable patch level for 2005-B for SDK Customization purpose.
Previously PL 25 is stable. As now PL 41 is already in market.
Anybody knows?
regards:
Sandy

Hi,
SAP Business One 2005 B (7.40.252) SP: 00 PL: 38
I think the above patch was stable after PL.:25
Raja.S

Browser unable to update the service status bits

I am having an issue with my computer becoming non-working. After a period of time of inactivity and then I go to use the computer, I can move the mouse cursor around but can do nothing else. I have noticed that when moving the cursor around that when I move it to the task-bar I get the hour glass waiting icon. I checked the event viewer and in the applications log I have numerous errors which say "The browser was unable to update the service status bits" Can you explain this and are there any fixes? Thank you

Hi Avinash,
Yes, CTS_BROWSER service is active. It was working before when I click to test. Unfortunately, it started throwing error. We are on SP13 in SOLMAN. I'm using solman as an ABAP stack.
Thanks for your time.

How to update the service order status at meter level

Hi
I need to fetch one open service order and update the retrieved open service order status at meter level.
I am trying to do it through BAPI_ALM_ORDER_MAITAIN but i am not able to do it.
Please let me know the process how to update.
Thanks & Regards
Pallavi

Hi,
Check if this code works ...
REPORT zbapi .
DATA t_meth TYPE TABLE OF bapi_alm_order_method.
**Internal table for Operation (BAPI)
DATA t_oper TYPE TABLE OF bapi_alm_order_operation.
DATA t_comp TYPE TABLE OF bapi_alm_order_component.
**Internal Table for Opertaions UP (BAPI)
DATA t_comp_up TYPE TABLE OF bapi_alm_order_component_up.
**Internal table for BAPI Return code
DATA t_ret TYPE TABLE OF bapiret2.
***WORK AREA DECLARATIONS
**Work Area for Hedaer
DATA:wa_header TYPE caufvdb,
wa_meth TYPE bapi_alm_order_method,
wa_op TYPE afvgb,
wa_comp TYPE resbb,
wa_comp1 TYPE bapi_alm_order_component,
wa_comp_up TYPE bapi_alm_order_component_up,
wa_oper TYPE bapi_alm_order_operation.
PARAMETERS:TEST.
****Fill Method Internal table
CLEAR wa_meth.
wa_meth-method = 'SAVE'.
APPEND wa_meth TO t_meth.
wa_meth-refnumber = sy-tabix.
wa_meth-objecttype = 'COMPONENT'.
wa_meth-method = 'CHANGE'.
wa_meth-objectkey(12) = '000004000104'.
wa_meth-objectkey+12(4) = '0010'.
wa_meth-objectkey+16(4) = '0010'.
APPEND wa_meth TO t_meth.
**Component Internal table
wa_comp1-reserv_no = '0000001072'.
wa_comp1-res_item = '0001'.
wa_comp1-activity = '0010'.
wa_comp1-item_number = '0010'.
wa_comp1-special_stock = 'B'.
wa_comp1-requirement_quantity = '15'.
wa_comp1-stge_loc = '0001'.
wa_comp1-backflush = 'X'.
APPEND wa_comp1 TO t_comp.
**Component Update Internal table
wa_comp_up-special_stock = 'X'.
wa_comp_up-backflush = 'X'.
wa_comp_up-requirement_quantity = 'X'.
wa_comp_up-stge_loc = 'X'.
APPEND wa_comp_up TO t_comp_up.
**Call Bapi
BREAK-POINT.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = t_meth
it_component = t_comp
it_component_up = t_comp_up
return = t_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. <--- Hope u r using this too
regards,
Naveen
Edited by: Naveen Deva on Apr 16, 2009 9:12 AM

What's the latest patch level?

Hi there,
We're working with 9i Lite 5.0.2.8.0 with the server on Solaris and the clients are HPC 2000 and Pocket PC 2002. Can anyone tell me if this is the latest patch release of 9i Lite, or is there anything newer out there?
Thanks,
Simon.

The best location to check the availability of patches is Metalink.
Oracle9i Lite 5.0.2.10.0 was released on Metalink last week for both Solaris and Win32

Self Services Patch Level for ESS 600 with ERP 6.0 Stack 14

Does anyone know what the note number or where I can find which level of XSS 600 patch should be used in conjunction with ERP Stack 14?
There is a note for XSS 100 (note: 761266) that explains what I'm looking for, but it only covers XSS100 not XSS 600.
Thanks,
I always award points.

Not exactly what I'm looking for. This note only describes the business package, which I'm not concerned about, I'm more looking for which XSS patch to use with the EA-HR sp level on the ECC 6.0 system.

SPAM update Error for patch level 42 on 7.01

Hi all,
While applying SPAM update 42 for 7.01, we received the error below. We also tried to apply a lower version with the same results. Your help is appreciated.
Class CL_OCS_RT_ANALYSIS,Method GET_XML
The row type of the table "ME->T_PATRTVERS" is not compatible with
field symbol type "<FS_PATRTVERS>".
from ST22:
Runtime Errors SYNTAX_ERROR
Date and Time 10/10/2011 05:16:00
Short text
Syntax error in program "CL_OCS_RT_ANALYSIS============CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPAM" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_OCS_RT_ANALYSIS============CP " in include
"CL_OCS_RT_ANALYSIS============CM002 " in
line 67:
"The row type of the table "ME->T_PATRTVERS" is not compatible
with fie"
"ld symbol type "<FS_PATRTVERS>"."
Thanks,
Domenick

Dear Domenick,
This issue you are facing is most probably because of a force reset of SPAM queue in IMPORT_PROPER phase.
You might have reset the queue forcibly which has created inconsistency in the system and has destoyed SPAM transaction
related program sources.
Now in order to resolve this you can try out a small fix.
You can pick up the class/interface CL_OCS_RT_ANALYSIS============CP from a system which has already been patched with SAPKD70142. You can transport this class to the affected system.
Once done, try to do the SPAM import. If the SPAM import is successfull it is fine.
If it not successfull, there is no other way apart from restoring the sytem since the SPAM sources are corrupt.
Best Regards,
Abhishek

Updating the Service Patch level

Similar Messages

Maybe you are looking for