Updation of custom BUPA fields through a report program

Hello everybody,
I have to change the entries made in BUPA table for a custom field ZZPAYMENT through report programming.
I tried using the function modules in following sequence :-
1)BUP_MEMORY_BUT000_GET
2)'BUPA_CENTRAL_CI_CHANGE
3)BAPI_TRANSACTION_COMMIT
But the first FM "BUP_MEMORY_BUT000_GET" is throwing an error of not found .Here in this fm ,i m passing buisness partner i as an import parameter. You all are welcome to suggest me some other way for updating these custom fields

When I have made changes to BUPA data, I have used
BAPI_BUPA_CENTRAL_GETDETAIL
BAPI_BUPA_CENTRAL_CHANGE
BAPI_TRANSACTION_COMMIT

Similar Messages

Updation of custom BUPA fields(EEWB) through a report program

Hello everybody,
I have to change the entries made in BUPA table for a custom field ZZPAYMENT through report programming.
I tried using the function modules in following sequence :-
1)BUP_MEMORY_BUT000_GET
2)'BUPA_CENTRAL_CI_CHANGE
3)BAPI_TRANSACTION_COMMIT
But the first FM "BUP_MEMORY_BUT000_GET" is throwing an error of not found .Here in this fm ,i m passing buisness partner i as an import parameter. You all are welcome to suggest me some other way for updating these custom fields

Hi Prashant,
BUP_MEMORY_BUT000_GET is get the value from memory. Ths function module will not work correctly in Z program.
Directly get BP GUID from BUT000 table and update it, if you are trying to achieve the functionality with Z program,
//pbp

How to lock a database Z table before updating it through a report program

Hi,
How to lock a database Z table before updating it through a report program and also how to unlock it after my updation.
The whole process is done through report program.

Hi,
Go to SE11, in the option 'Lock object' enter the name of your lock,
begin with 'E', suppose 'EXXXX' And create. In tab 'Tables' fill the
table name where the record you want to lock exist and select the
lock mode. Lock mode can be shared and exclusive. If 'shared',
when you lock the record, other can also read data, but can not
modify. If 'exclusive', when you lock the record, other can neither
read nor modify the record. After save and activate, you will get two
function module.'ENQUEUE_EXXXX' to lock record,
'DEQUEUE_EXXXX' to release lock on one record.
When use this function module it only lock one record at a time. It
does not lock the table.
Regards,
Omkaram.

Read the buffer in screen fields of the report program.

Hi all,
I have 2 screen fields in a report program. I need to do some process based on the entry in the 1 st field.
But i need press 'enter' after making an entry in the 1st field. I want to read the field dynamically. I was able to find a function module to do it 'DYNP_VALUES_READ'. In this one of the import attribute is the dyname. I give the field name of the 1st field as per its defined in the selection parameter of th report program. And when exectued the function module returns invalid dyprofield.
kindly advise on what should be the dyproname for selection parameter.
Thanks And Regards
Ravish

hi ravi,
just execute the code and try to know where u r getting error in ur code .
in this just give the input as USD(us dollar)
substitute for dynname = sy-cprog in ur code and check that .
hope this helps u out .
regards,
vikky.
tables tcurt.
DATA   DYFIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
PARAMETERS: P_WAERS LIKE TCURT-WAERS,        "Currency
            P_LTEXT LIKE TCURT-LTEXT,        "Long Text
            P_KTEXT LIKE TCURT-KTEXT.        "Short Text
*--- Example of updating value of another field on the screen -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_WAERS.
CLEAR: DYFIELDS[], DYFIELDS.
*--- select currency
CALL FUNCTION 'HELP_VALUES_GET'
       EXPORTING
            fieldname        = 'WAERS'
            tabname          = 'TCURT'
       IMPORTING
            SELECT_VALUE     =   P_WAERS.
*--- get long text for the selected currency
SELECT SINGLE LTEXT FROM TCURT
    INTO DYFIELDS-FIELDVALUE
    WHERE SPRAS = SY-LANGU
    AND   WAERS = P_WAERS.
IF SY-SUBRC <> 0.
    CLEAR DYFIELDS-FIELDVALUE.
ENDIF.
*--- update another field
DYFIELDS-FIELDNAME = 'P_LTEXT'.
APPEND DYFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            DYNAME               = SY-CPROG
            DYNUMB               = SY-DYNNR
       tables
            dynpfields           = DYFIELDS .
**--- Example of reading value of another field
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_KTEXT.
*--- read another field
CLEAR: DYFIELDS[], DYFIELDS.
DYFIELDS-FIELDNAME = 'P_WAERS'.
APPEND DYFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            DYNAME                   = SY-CPROG
            DYNUMB                   = SY-DYNNR
       TABLES
            DYNPFIELDS               = DYFIELDS .
READ TABLE DYFIELDS INDEX 1.
*--- get short text and update current field
SELECT SINGLE KTEXT FROM TCURT
    INTO P_KTEXT
    WHERE SPRAS EQ SY-LANGU
    AND   WAERS EQ DYFIELDS-FIELDVALUE.

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

Customer Specific Fields in Standard Report???????????????

Hi Gurus,
             I have added Customer Specific Fields in a Notification Type.
             I need a Report with these Cutomer Specific Fields ( added by Screen Exit) in the Standard Transaction like IW65,IW69.
            Please give me the solution, suggestions to Extarct these fields in Standard Reports.
With best ragards,
Narendra

Narendra,
I'm not sure IWOC0004 will help...
If you are using ECC6, then investigate enhancement spots in the respective programs. Your ABAP team should be able to help.
PeteA

How to get list of custom objects used in abap report program?

Hi friends,
I have a requirement in which I have to scan the entire abap report and retrieve list of custom objects used in it for example custom tables, data elements, structures, table types etc,. Is there any provision in SAP like fuction modules to do this functionality? As of now I am coding everything manually where so many possibilities are there for all kinds of objects. Provide your answers and suggestions...
Thanks,
Nastera

Hi,
The best way to do this is environment analysis. Follow the steps:
1. Open se38, type in the program name (don't click on on display/change or create button, stay on first screen only)
2. Click on environment analysis button (hot key SHIFT+F4)
3. It will throw a pop-up, which will ask for type of object you want to see, which are linked /used by this program. select all (or may be if you are only interested in Tables, then select table only)
4. Hit 'Enter'
You will get the full list of all objects used in this report program. Just note down the one which starts with Z or Y and that's it.
Cheers,
Anid

Auto selection of a value on selection screen field of a report program

Dear Gurus,
I have encountered a case in a report program, if i select a vendor code in selection screen, simultaneously the region code of that vendor should come automatically to the next parameter(ie region code). Is it possible..if then how?
Thanks in Advance
Saif

Hi Saifur,
write the code in the at selection-screen output.
Try this logic.
TABLES :
SCARR ,
SPFLI ,
SFLIGHT ,
SBOOK .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME .
PARAMETERS :
P_FLIGHT RADIOBUTTON GROUP R1 ,
P_BOOK RADIOBUTTON GROUP R1 .
SELECTION-SCREEN END OF BLOCK B1 .
SELECT-OPTIONS S_FLDATE FOR SFLIGHT-FLDATE DEFAULT '20090101' TO
'20090131'.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME .
PARAMETERS :
P_TEMP1 RADIOBUTTON GROUP R2 MODIF ID SC1 ,
P_TEMP2 RADIOBUTTON GROUP R2 MODIF ID SC1 .
SELECT-OPTIONS S_CARRID FOR SCARR-CARRID MODIF ID SC1 .
SELECTION-SCREEN END OF BLOCK B2 .
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME.
PARAMETERS :
P_TEMP01 RADIOBUTTON GROUP R3 MODIF ID SC2 ,
P_TEMP02 RADIOBUTTON GROUP R3 MODIF ID SC2 .
SELECT-OPTIONS S_BOOKID FOR SBOOK-BOOKID MODIF ID SC2 .
SELECTION-SCREEN END OF BLOCK B3 .
AT SELECTION-SCREEN OUTPUT .
IF P_FLIGHT = 'X' .
FL_FLAG = 1 .
LOOP AT SCREEN .
IF SCREEN-GROUP1 = 'SC2' .
SCREEN-ACTIVE = 0 .
MODIFY SCREEN .
ENDIF.
ENDLOOP.
ELSEIF P_BOOK = 'X' .
FL_FLAG = 2 .
LOOP AT SCREEN .
IF SCREEN-GROUP1 = 'SC1'.
SCREEN-ACTIVE = 0 .
MODIFY SCREEN .
ENDIF.
ENDLOOP.
ENDIF .
On pressing Enter use sy-ucomm value onli to do that and then write the above logic for another select-option.
Much Regards,
Amuktha.
Edited by: Amuktha Naraparaju on Mar 12, 2009 1:24 PM

Data not Updated in Custom Screen fields-Vendor Master

Hello,
I have created a custom screen in vendor master transaction and also implemented the two BADI's below.
Business Add-In: Processing Master Data Enhancements
(CUSTOMER_ADD_DATA/VENDOR_ADD_DATA)
Passed the Custom Program and Screen No in the method GET_TAXI_SCREEN
Business Add-In: Customer Subscreens
(CUSTOMER_ADD_DATA_CS/VENDOR_ADD_DATA_CS)
activate it with the BADI Processing Master Data Enhancements with method CHECK_ADD_ON_ACTIVE.
I also created a new screen and used few fields from LFA1 (Append structure fields) such that the fields on the screen are : LFA1-ZZFIELD1 etc...
Now the issue is the screen is displayed, but the data entered on the screen is not updated on the table LFA1 or data from the table is not displayed on the custom screen.
Am i missing something?
Regards,
Shiva

Solved this problem.
I built the query against InfoCube and not the characteristic itself. That's why I can't see the update.
Thanks.

Custom date fields in Interactive Report

Hi,
I am using newly patched version of Apex - 4.0.2.00.06
What I am trying to do is to have two datepicker fields P84_DATE_FROM and P84_DATE_TO in separate HTML region, on the page that has IR / Interactive Report, that will be filter in report source.
In debug mode I noticed that values that are picked with datepicker are not binding in report sql.
select * from calendar_x
where
date between to_date(:P84_DATE_FROM,'DD.MM.YYYY') and to_date(:P84_DATE_TO,'DD.MM.YYYY')
Do I have to force submit on Go button before it executes gReport.search('SEARCH')? Is it the right way to go about this?
Thnx,

Hi Vish,
I was informed by SAP few months back that Interactive Reports can not be enhanced with custom fields. I don't see any documentation regarding this.
You may want to check with SAP also.
Regards,
Paparao Undavali

Ability to update a custom text field across multiple projects in a grid type view

We have a project level custom field for the Project Owner to enter an Executive Level project status. A project owner will have many projects. Right now the owner has to open each project individually, update the text field and save which can
take a considerable amount of time. We would like to have the ability to have the project list with the text field in a grid (looks like an excel sheet) with the ability to update the text field directly from the grid. Is there some way
to do this?

Hi,
Which project version are you using?
Anyway there is no "excel-like" way to bulk edit proejct field, such as you can do for the resources. The project center is unfortunately a read-only view.
For PS2010, the
bulk edit tool allows you bulk editing pronot be "excel-like" meaning updating the value in rows. You'll have to select the project with the same value for the custom field and enter the value once and validate and redo this process for each proejct field
value.
Otherwise third-party tools are available on the market for this purpose:
http://www.senseiprojectsolutions.com/sensei-bulk-update/
http://www.fluentpro.com/productsfluentbooks2013.html
Finally you could develop a side-application to achieve this objective.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Custom Z fields in Interactive reports

Hi Gurus,
We have enhanced the Opportunity Object using EEWB
These fields are now not available in the Interactive Reports
I have tried to create my own report using the 'Manage Reports' Work Center
and saw that these fields are not available for picking in the report
Is there anything i need to do inorder to make these fields pickable in the reports
Regards,
Vish

Hi Vish,
I was informed by SAP few months back that Interactive Reports can not be enhanced with custom fields. I don't see any documentation regarding this.
You may want to check with SAP also.
Regards,
Paparao Undavali

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

Using Power Query to Update Project Custom Fields

Is Power Query in Excel 2013 able to do Bi-directional updates for updating Enterprise Custom Project fields in PWA 2013?

So to update data you would need to either use one of the following APIs:
PSI
CSOM
JSOM
JSOM REST
Always try and use one of the client side API's if possible (PSI is a server side API). I'm not sure you will be able to do this via Excel though, I would look at a custom app , web part etc.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

To Update the IDOC segment values through report program

My requirement is to update the Idoc segment through the report program. Any SAP provided standard function module is available to update the Idoc segment values. Please help needed.

DATA: LT_EDIDD TYPE STANDARD TABLE OF EDIDD."Local Table to Hold EDIDD
    LT_EDIDD = I_EDIDD. "table should have the data
*-- Opening the IDoc for Edit
    CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
      EXPORTING
        DOCUMENT_NUMBER               = X_EDIDC-DOCNUM
      TABLES
        IDOC_DATA                     = IT_EDIDD
      EXCEPTIONS
        DOCUMENT_FOREIGN_LOCK         = 1
        DOCUMENT_NOT_EXIST            = 2
        DOCUMENT_NOT_OPEN             = 3
        STATUS_IS_UNABLE_FOR_CHANGING = 4
        OTHERS                        = 5.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
*-- Editing the IDoc
    CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
      TABLES
        IDOC_CHANGED_DATA_RANGE = LT_EDIDD
      EXCEPTIONS
        IDOC_NOT_OPEN           = 1
        DATA_RECORD_NOT_EXIST   = 2
        OTHERS                  = 3.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
*-- Closing the IDoc after Edit
    CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
      EXPORTING
        DOCUMENT_NUMBER = X_EDIDC-DOCNUM
        DO_COMMIT        = 'X'
        DO_UPDATE        = 'X'
        WRITE_ALL_STATUS = 'X'
      EXCEPTIONS
        IDOC_NOT_OPEN    = 1
        DB_ERROR         = 2
        OTHERS           = 3.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
thanks
vijay

Updation of custom BUPA fields through a report program

Similar Messages

Maybe you are looking for