Updation of documents

hi friends,
where i can see the material doc. and accounting doc after delivery???
regards
raj

Dear Raj,
After completion of PGI of the delivery you can see the Material document and accounting document.
From the delivery screen you click on Document flow icon now system will give the document flow details here you select GD goods issue:delvy XXXXXX then click on Display document push button now system will take you to the Material Document in the Top right side of material document you can find the Account Documents push button you click on that to go to Accounting Document.
Other wise
T.code MB03 is for material document
T.code FB03 for accounting document.
I hope this will help you,
Regards,
Murali.

Similar Messages

Error on update of document stored in content server

Error on update of document stored in content server
On a regular basis (but not reproducible) we find that after updating a document, it is deleted from content server (or at least it cannot be retrieved). These problems have only been experienced since we switched to using content server as our storage repository, as opposed to R/3.
We create and maintain documents through a bespoke transaction, which calls standard SAP functions BDS_BUSINESSDOCUMENT_CREA_TAB and cl_bds_document_set=>update_with_table.
Whilst the errored documents are listed in the BDS via transaction OAOR (business document navigator), an error is received when you try to display it (in our case an MS-Word error indicating file/pathname invalid).
We are satisfied that file/pathname are valid and find that this occurs occasionally when a document has been updated. It appears that the document has been deleted.
This bespoke transaction has been running successfully for almost two years, and these problems have only been experienced after switching to content server as a storage repository (as opposed to R3 previously). Has anyone else experienced these problems?
We are running :
R/3 Enterprise 620,
SAP HTTP Content Server Version 6.30 Patch 13
SAPDB version 7.3.0.54

Hi Sonny,
To check the connectivity between your content server and Workstation and SAP Server.
Pls goto the command prompt of your workstation
give the command like this example.
C:\>Ping 117.123.45.201
you will get the reply from the server. here 117.123.45.201 is your content server IP.
If you are getting the reply then it means that your contentserver and workstation are connected propely.
Like that pls check the connectivity between your systems.
Pls check the hosts file of your systems also.
If the hosts file entry is not maintained, you can check-out file from content server but you cannot check-in the original.
Pls let me know what kind of error Message you are getting?
From where you are trying to check-in the Original? From the DIR screen or from CAD Desktop screen?
Regards,
MRK
(reward points if useful)

How to update many documents in one go using portal permissions

Hello,
I have two users in the portal with different permissions on a folder:
rct2774: Total control
rct3343: Read
So, connected to the portal, rct3343 can´t upload (or erase) any document.
Now, I´ve followed these instructions to update many documents in one go (found in "how to upload a folder containg HTML files in a KM folder" topic 22 - jun - 2006)
"You can use the WebDaV.
1. Get the WebDav path of your KM folder by going to details->properties->Access Links
2. Copy the url for the WebDav
3. Go to your desktop. Right Click on My Network Places.
click on open.
4. Click on add a network place.
5. Click on "Choose another network location"
6. Paste your copied url and click on next.
7. Enter your portal userid and password. Now drag and drop your files from desktop. "
But, updating this way both users (rct2774 and rct3343) can update, download and erase any document that belongs to that location.
Do you know a way to update many documents in one go respecting or keeping the portal permissions?
Thanks in advance.
Best Regards,
Esteban

Hi Marc,
First of all, thaks for your prompt reply. I´m new in these themes and any help is wellcome.
We are doing many tests now, so we´re using the server portal as repository in itself. It´s quite strange because the permissions work at the portal correctly but not by the other way.
Should I download the portal drive to the client PC for mantain the portal permissions?
Thank you!

Updating a document with category metadata using updateDocument(): error!

I have studied the sample code and the API docs, and I feel pretty sure I am coding it according to the docs, but I cannot successfully update a document with category metadata. I always get a MetaDataSchemaInvalid exception.
My process goes like this:
1. Upload a new file, creating a new document publicobject.
2. Create a CATEGORY_DEFINITION with all the metadata name/value pairs I wish to write.
3. Call FileManager.updateDocument() with this CATEGORY_DEFINITION.
My process differs from the docs in that I am first uploading the document, and then adding the metadata as a second step. I want to get it working this way to make my system more modular. I do not want to make my upload method dependent upon metadata attributes, and vice versa.
Step 1 is working fine. The document is being uploaded to the right folder. Good to go.
Step 3 is where I get the error. If the error is my fault, then it must be a result of what I do in step 2. The structure of my CATEGORY_DEFINITION must be messed up.
Here is my code for creating the CATEGORY_DEFINITION. The Document class is my own entity that encapsulates the binary data for a document, as well as the metadata attributes that are to be assigned to the document once it is uploaded into Content Services. We don't need to worry about where the data comes from. Just assume the raw data is correct.
public NamedValue[] newCategoryAttributeDefinition(Document document, String categoryDisplayName) throws WebserviceClientException {
/* Get the category attribute name-value pairs as a 2-D array. */
Map metadataMap = document.getMetadataParser().getAttributeNameMapping();
List categoryDefinitionAttributeList = new ArrayList();
for(Iterator i = metadataMap.entrySet().iterator(); i.hasNext();) {
Map.Entry entry = (Map.Entry)i.next();
String name = "CUSTOM_" + (String)entry.getKey();
Object value = entry.getValue();
if(value != null) {
categoryDefinitionAttributeList.add(new Object[] { name, value });
Object[][] categoryDefinitionAttributeArray = new Object[categoryDefinitionAttributeList.size()][];
int index = 0;
for(Iterator i = categoryDefinitionAttributeList.iterator(); i.hasNext();) {
Object[] value = (Object[])i.next();
categoryDefinitionAttributeArray[index++] = value;
/* Create the NamedValue tree that describes this category's attribute values. */
Long categoryId = new Long(getCategoryClassId(categoryDisplayName));
NamedValue[] categoryAttributeDefinition = WebserviceUtils.newNamedValueArray(new Object[][] {
{ Options.CATEGORY_ID, categoryId },
{ Options.CATEGORY_DEFINITION_ATTRIBUTES, WebserviceUtils.newNamedValueArray(categoryDefinitionAttributeArray) }
NamedValue[] categoryDefinition = WebserviceUtils.newNamedValueArray(Options.CATEGORY_DEFINITION, categoryAttributeDefinition);
return categoryDefinition;
And below is the resulting CATEGORY_DEFINITION, as seen in a jdb debugger.
-- The OPT.CATEGORY_ID value is equal to the ID column in ODMV_SCHEMACATEGORY, otherwise known as the category class id.
-- My OPT.CATEGORY_DEFINITION_ATTRIBUTES tree for this document has the 4 attributes that I want to set. The category has more than these 4 attributes; I am not populating every attribute. None of the attributes are required, and all are editable. I don't need to include every attribute in my CATEGORY_DEFINITION, even if the values are null, do I? Also, all the attribute names start with "CUSTOM_", which I believe is necessary - right?
-- I am setting only the OPT.CATEGORY_ID and OPT.CATEGORY_DEFINITION_ATTRIBUTES. Am I missing some other required attribute?
http-8888-Processor5[1] http-8888-Processor5[1] dump categoryDefinition
categoryDefinition = {
instance of oracle.ifs.fdk.NamedValue(id=2562)
http-8888-Processor5[1] dump categoryDefinition[0]
categoryDefinition[0] = {
name: "OPT.CATEGORY_DEFINITION"
value: instance of oracle.ifs.fdk.NamedValue[2] (id=2559)
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
http-8888-Processor5[1] dump categoryDefinition[0].value[0]
categoryDefinition[0].value[0] = {
name: "OPT.CATEGORY_ID"
value: instance of java.lang.Long(id=2558)
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
http-8888-Processor5[1] dump categoryDefinition[0].value[0].value.toString()
categoryDefinition[0].value[0].value.toString() = "60068"
http-8888-Processor5[1] dump categoryDefinition[0].value[1]
categoryDefinition[0].value[1] = {
name: "OPT.CATEGORY_DEFINITION_ATTRIBUTES"
value: instance of oracle.ifs.fdk.NamedValue[4] (id=2570)
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
http-8888-Processor5[1] dump categoryDefinition[0].value[1].value[0]
categoryDefinition[0].value[1].value[0] = {
name: "CUSTOM_From"
value: "SA"
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
http-8888-Processor5[1] dump categoryDefinition[0].value[1].value[1]
categoryDefinition[0].value[1].value[1] = {
name: "CUSTOM_Footer Number"
value: "PRM 34-318"
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
http-8888-Processor5[1] dump categoryDefinition[0].value[1].value[2]
categoryDefinition[0].value[1].value[2] = {
name: "CUSTOM_To"
value: "PROJECT TEAM"
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
http-8888-Processor5[1] dump categoryDefinition[0].value[1].value[3]
categoryDefinition[0].value[1].value[3] = {
name: "CUSTOM_Subject"
value: "Riverside Energy Resource Center Meeting Minutes-Internal"
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2564)
class$oracle$ifs$fdk$NamedValue: instance of java.lang.Class(reflected class=oracle.ifs.fdk.NamedValue, id=1975)
After building this CATEGORY_DEFINITION, I go on to attempt an update to the document with this information. Here is the method I call. I always fall into the catch(), and the error dump follows the code snippet. Unfortunately, the error doesn't tell me a lot about what's wrong. That's why I am asking for help in spotting any conspicuous errors in my CATEGORY_DEFINITION.
public Item addCategoryToDocument(Item documentItem,
NamedValue[] categoryDefinition)
throws WebserviceClientException {
FileManager fileManager = getWebserviceClient().getFileManager();
Item documentItemWithCategory = null;
try {
documentItemWithCategory = fileManager.updateDocument(documentItem.getId(), categoryDefinition, null);
} catch(Exception e) {
throw new WebserviceClientException("Could not update document with category definition.", e);
return documentItemWithCategory;
http-8888-Processor4[1] http-8888-Processor4[1] dump e
e = {
detailedErrorCode: "ORACLE.FDK.AggregateError"
errorCode: "ORACLE.FDK.AggregateError"
exceptionEntries: instance of oracle.ifs.fdk.FdkExceptionEntry[1] (id=2691)
info: null
serverStackTraceId: ""
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2694)
class$oracle$ifs$fdk$FdkException: instance of java.lang.Class(reflected class=oracle.ifs.fdk.FdkException, id=1972)
org.apache.axis.AxisFault.log: instance of org.apache.commons.logging.impl.Log4JLogger(id=2695)
org.apache.axis.AxisFault.faultCode: instance of javax.xml.namespace.QName(id=2696)
org.apache.axis.AxisFault.faultSubCode: null
org.apache.axis.AxisFault.faultString: "ORACLE.FDK.AggregateError:ORACLE.FDK.AggregateError"
org.apache.axis.AxisFault.faultActor: null
org.apache.axis.AxisFault.faultDetails: instance of java.util.Vector(id=2698)
org.apache.axis.AxisFault.faultNode: null
org.apache.axis.AxisFault.faultHeaders: null
org.apache.axis.AxisFault.class$org$apache$axis$AxisFault: instance of java.lang.Class(reflected class=org.apache.axis.AxisFault, id=1928)
java.rmi.RemoteException.serialVersionUID: -5148567311918794206
java.rmi.RemoteException.detail: null
java.lang.Exception.serialVersionUID: -3387516993124229948
java.lang.Throwable.serialVersionUID: -3042686055658047285
java.lang.Throwable.detailMessage: null
java.lang.Throwable.cause: null
java.lang.Throwable.stackTrace: instance of java.lang.StackTraceElement[76] (id=2699)
http-8888-Processor4[1] dump e.exceptionEntries[0]
e.exceptionEntries[0] = {
detailedErrorCode: "ORACLE.FDK.MetadataSchemaInvalid"
errorCode: "ORACLE.FDK.MetaDataError"
id: 348018
info: null
serverStackTraceId: ""
__equalsCalc: null
__hashCodeCalc: false
typeDesc: instance of org.apache.axis.description.TypeDesc(id=2705)
class$oracle$ifs$fdk$FdkExceptionEntry: instance of java.lang.Class(reflected class=oracle.ifs.fdk.FdkExceptionEntry, id=1973)
}

1 – For an existing document, how do I determine what category instances have been applied to it and their attribute values
FdkSession session = …;
// Consider we have an existing item myDoc of type document
Item myDoc = …;
CommonManager cm = Managers.getCommonManager(session);
AttributeRequest[] requestedAttributes = new AttributeRequest[]
// The Categories associated with this Document, if any
new AttributeRequest(Attributes.CATEGORIES,
// sub attributerequest
new AttributeRequest[] {
    // the actual attributes name/values for the category instance – returns a namedvalue array
    new AttributeRequest(Attributes.CUSTOM_ALL,null),
    // the actual category class for the category instance – returns an item
    new AttributeRequest(Attributes.CATEGORY_CLASS_OBJECT,null)
myDoc = cm.getItem(myDoc.getId(), requestedAttributes);
log(myDoc); /* output could look like:
(Item) 14385 DOCUMENT sample3.doc
requested attributes ...
CATEGORIES (Item[])=
(Item) 14387 CATEGORY
requested attributes ...
CUSTOM_ALL (NamedValue[])=
CUSTOM_14352=true (Boolean)
CUSTOM_14353=Internal Only Pending Review (String)
CATEGORY_CLASS_OBJECT (Item)=
(Item) 14354 CATEGORY_CLASS 5044-14351
This means, that for document sample3.doc, we have 1 instance of a category object applied to it.
The category object instance has id 14387. The instance is of a category class object type 14354. The instance has two attributes with internal names CUSTOM_14352, and CUSTOM_15353. The values of these attributes are of type Boolean and String respectively.
2 - How do I update an attribute value of an existing category instance applied to an item
FdkSession session = …;
// Consider we have an existing item myDoc of type document
Item myDoc = …;
.. perform code along the lines of that shown in step1 above to determine existing category instance info on the document ..
FileManager fm = Managers.getFileManager(session);
NamedValue[] categoryInstanceAttributes = new NamedValue[] {
// use the internal attribute name for all attributes
new NamedValue("CUSTOM_14352", Boolean.FALSE),
new NamedValue("CUSTOM_14352", "Company Confidential")
NamedValue[] categoryDef = new NamedValue[] {
// the category instance that we are updating
new NamedValue(Options.UPDATE_CATEGORY_ID,new Long(14387)),
// the updated values of the category instance
new NamedValue(Options.CATEGORY_DEFINITION_ATTRIBUTES, categoryInstanceAttributes)
NamedValue[] documentDef = new NamedValue[] {
new NamedValue(Options.CATEGORY_DEFINITION, categoryDef)
requestedAttributes = ...
myDoc = fm.updateDocument(myDoc.getId(),documentDef,requestedAttributes) ;
3 – For a document item X, what is the associated category configuration which could include
a) what are the category objects I can apply on it (either explicitly restricted by way of ALLOWED_CATEGORIES on the folder configuration, or any site/domain category by way of ALLOW_ALL_CATEGORIES)
b) is there any attribute overrides
c) is there any enforced categories
FdkSession session = …;
// Consider we have an existing item myDoc of type document
Item myDoc = …;
CommonManager cm = Managers.getCommonManager(session);
AttributeRequest[] categoryObjectAttributes = new AttributeRequest[]
// What is the category object class name
new AttributeRequest(Attributes.CLASS_NAME,null),
// What is the category classobject display name
new AttributeRequest(Attributes.DISPLAY_NAME,null),
// get attributes inherited and introduced by category object
new AttributeRequest(Attributes.METADATA_ATTRIBUTES,
new AttributeRequest[]
    // Attribute internal name
    new AttributeRequest(Attributes.ATTRIBUTE_NAME,null),
    // Attribute display name
    new AttributeRequest(Attributes.DISPLAY_NAME,null),
    new AttributeRequest(Attributes.ATTRIBUTE_TYPE,null),
    new AttributeRequest(Attributes.ATTRIBUTE_DEFAULT,null),
    new AttributeRequest(Attributes.ATTRIBUTE_ENUMERATION,null),
    new AttributeRequest(Attributes.ATTRIBUTE_REQUIRED,null),
    new AttributeRequest(Attributes.ATTRIBUTE_SETTABLE,null),
    new AttributeRequest(Attributes.ATTRIBUTE_UPDATEABLE,null),
    new AttributeRequest(Attributes.ATTRIBUTE_HIDDEN,null),
    new AttributeRequest(Attributes.ATTRIBUTE_PROMPTED,null),
    new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDEABLE,null),
AttributeRequest[] overrideAttributes = new AttributeRequest[]
// id of the attribute to be overridden
new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDE_ATTRIBUTE,null),
// id of the category class object to which this attribute override applies
new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDE_CATEGORY_CLASS,null),
// new default value
new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDE_DEFAULT,null),
// should attribute now be prompted
new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDE_PROMPT,null),
// is the attribute now required
new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDE_REQUIRED,null),
// can instances of this attribute have there value updated
new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDE_SETTABLE,null),
AttributeRequest[] requestedAttributes = new AttributeRequest[]
// what is the category configuration for the item
new AttributeRequest(Attributes.CATEGORY_CONFIGURATION,
new AttributeRequest[]
    // Is the category configuration enabled
     new AttributeRequest(Attributes.CONFIGURATION_ENABLED,null),
     // Can the category configuration be overridden or is it final
    new AttributeRequest(Attributes.CONFIGURATION_FINAL,null),
    // What are the required categories for the category configuration and associated attribute information
    new AttributeRequest(Attributes.REQUIRED_CATEGORIES,categoryObjectAttributes),
    // Can any categories in the site be utilized
    new AttributeRequest(Attributes.ALLOW_ALL_CATEGORIES,null),
    // or .. are we restricting the categories to only the following
    new AttributeRequest(Attributes.ALLOWED_CATEGORIES,categoryObjectAttributes),
    // are there any attribute overrides on category object attributes for this category config?
    new AttributeRequest(Attributes.ATTRIBUTE_OVERRIDES,overrideAttributes)
log(cm.getItem(myDoc.getId(), requestedAttributes); /*
If ALLOW_ALL_CATEGORIES is set to true, any category in the domain can be utilized that is not abstract. To determine these, the domain item has a property CATEGORY_CLASSES that returns all category objects in the domain. It also has a property ROOT_CATEGORY_CLASSES which returns just the top level categories (those that have no custom category superclass). You would create a sub AttributeRequest[] checking for CLASS_ABSTRACT when requesting the appropriate categories attribute from the domain.
If ALLOW_ALL_CATEGORIES is set to false, the applicable categories objects that can be utilized on items contained in the folder is determined by the items contained in the ALLOWED_CATEGORIES attribute of the category configuration.
Finally, the REQUIRED_CATEGORIES attribute list the category items that must be applied to all new items added to the folder.
4 – How do I manually apply an instance of a category to an existing item
FdkSession session = …;
// Consider we have an existing item myDoc of type document
Item myDoc = …;
.. use techniques in step3 above to determine what category objects that you planning to apply to the document ..
.. if the category configuration on the item has ALLOW_ALL_CATEGORIES set to true, you can use any category in the system
.. otherwise, you must use a category defined in the allowed categories list
.. the code here is essentially the same as step2 above
.. you must utilize internal attribute names, and specify the id of the category class object
FileManager fm = Managers.getFileManager(session);
NamedValue[] categoryInstanceAttributes = new NamedValue[] {
// use the internal attribute name for all attributes
new NamedValue("CUSTOM_14352", Boolean.FALSE),
new NamedValue("CUSTOM_14352", "Company Confidential")
NamedValue[] categoryDef = new NamedValue[] {
// the id of the category object class for which this new category will be an instance of
new NamedValue(Options.CATEGORY_CLASS_ID,new Long(14354)),
// the updated values of the category instance
new NamedValue(Options.CATEGORY_DEFINITION_ATTRIBUTES, categoryInstanceAttributes)
NamedValue[] documentDef = new NamedValue[] {
new NamedValue(Options.CATEGORY_DEFINITION, categoryDef)
requestedAttributes = ...
myDoc = fm.updateDocument(myDoc.getId(),documentDef,requestedAttributes);
// Note – it is possible for one to peform creation, updating, and deletion of various category instances for an existing item in the fileManager updateDocument call!
// you simply supply multiple Options.CATEGORY_DEFINITIONs to the fm.updateDocument call along with any Options.REMOVE_CATEGORY_IDs 5 – How do I specify a category instance when creating a new item
FdkSession session = …;
.. use techniques in step3 above to determine what category objects that you planning to apply to the new document ..
.. you get the category configuration information from the destination folder!!!
Item destinationFolder = …;
CommonManager cm = Managers.getCommonManager(session);
AttributeRequest[] requestedAttributes = new AttributeRequest[]
// what is the category configuration for the item
new AttributeRequest(Attributes.CATEGORY_CONFIGURATION,
destinationFolder = cm.getItem(destinationFolder.getId(),requestedAttributes);.. if the category configuration on the folder item has ALLOW_ALL_CATEGORIES set to true, you can use any category in the system
.. otherwise, you must use a category defined in the allowed categories list
.. the code here is essentially the same as step2 above, just we are using createDocument and document definitions now
.. you must utilize internal attribute names, and specify the id of the category class object
FileManager fm = Managers.getFileManager(session);
NamedValue[] categoryInstanceAttributes = new NamedValue[] {
// use the internal attribute name for all attributes
new NamedValue("CUSTOM_14352", Boolean.FALSE),
new NamedValue("CUSTOM_14352", "Company Confidential")
NamedValue[] categoryDef = new NamedValue[] {
// the id of the category object class for which this new category will be an instance of
new NamedValue(Options.CATEGORY_CLASS_ID,new Long(14354)),
// the attribute values for this new category instance
new NamedValue(Options.CATEGORY_DEFINITION_ATTRIBUTES, categoryInstanceAttributes)
String destinationFile = "sample.doc";
requestedAttributes = new AttributeRequest[]
new AttributeRequest(Attributes.URL,null)
Item docDef = fm.createDocumentDefinition(new NamedValue[]
new NamedValue(Attributes.NAME, destinationFile),
},requestedAttributes);
String defURL = ... // get URL from document definition
doFileUpload(...) // upload file using http put to defURL
NamedValue[] documentDef = new NamedValue[] {
new NamedValue(Options.USE_SAVED_DEFINITION,new Long(docDef.getId())),
new NamedValue(Options.DESTFOLDER, new Long(destinationFolder.getId())),
// specify character set if appropriate
new NamedValue(Attributes.DOCUMENT_CHARACTER_SET,"ISO-8859-1"),
// specify language if appropriate
new NamedValue(Attributes.DOCUMENT_LANGUAGE,"ENGLISH"),
// apply category instance information
new NamedValue(Options.CATEGORY_DEFINITION, categoryDef),
requestedAttributes = ...
Item doc = fm.createDocument(documentDef,null, requestedAttributes);
// Note – it is possible for one to peform creation of multiple category instances on a document at the same time
// you simply supply multiple Options.CATEGORY_DEFINITIONs to the fm.createDocument call
// Note – that if a folder has a category configuration containing required categories, and you do not specify
// all applicable category definitions on createDocument, you will receive an FdkException along the lines of
// missing metadata. You can catch this exception, and retry the createDocument call supplying the valid category definition(s).

Any upload programe for mass update of documents

hi
i just want to know whther there is a process for mass update of documents .....like LSMW .....
pls suggest me
Reagards
s

Hi Surya,
Following are the step to upload batch document in LSMW:
Create the Project, Subproject and Object in the LSMW Transaction (press F8)
1) Maintain Object Attributes (click on Batch input recording) for ex: Do the recording to create DIR .
Create recording (t code CV01N
It will direct us to T code CV01N crate DIR attaché the document then save it.
2) Maintain Source Structures: from Object overview List
For easy reference copy the source file to Excel sheet and tabulate it has horizontal format then copy that in .txt .Create source structure save and go back.
3) Maintain Source Fields:
Maintain table (for ex: field name: DOKAR, type (should be) :C and length: 3) save it and go back.
4) Maintain Structure Relations : create relationship and go back.
5) Maintain Field Mapping and Conversion Rules
Go to Extras -> Auto field mapping
Accept all proposals Continue till Auto file mapping is completed save it and go back.
6) Maintain Fixed Values, Translations, User-Defined Routines(Optional)
7) Specify Files
Specify the input file (which we have saved in .txt file format in step 2) click in Tabular.
8) Assign files
9) Read Data:
Execute the read data step to read the input file data (press F8)
10) Display Read Data .
11) Display and Convert Data:
The validations will take place when we execute the convert data step. The error records will download to the specified file path if there any and same will be displayed.
12) Create Batch Input Session (press F8)
13) Run Batch Input Session (press process-F8)
Thus continue with this process document can be uploaded with given source file hence will create the specified DIR. hence continue enter...
Continue till all the DIR created (as per input given in source file).
Regards,
Seema Pilankar

Updating Excise document number during j1iln

Hi SAP experts.,
i want to update excise document number to reference key2 field of billing document during J1ILN posting . How can i achieve this with the help of enhancement spots or BADI's . Please list me the BADI's available .
Regards.,
S.Sivakumar
Edited by: sivakumar subramaniam on Mar 2, 2009 10:29 AM
Edited by: sivakumar subramaniam on Mar 2, 2009 10:30 AM

solved myself

Pages is updating my documents and I can't open them anymore... Any suggestions to fix the problem?

The app is updating 97 documents, I can't open them and it's been updating for more than 2 hours. I really need these documents, how can I fix the problem?

Click on the '''Tools''' menu in '''Firefox''' and then click on '''Downloads'''.
This will bring up the "Downloads" window.
It should list all of your downloads. You can open each download by double-clicking on it.
If you still can't open the downloads by double-clicking, try the following:
In Firefox, click on '''Tools''' and then '''Options'''
Click the '''General''' tab to find out where your Downloads are going to. It should be listed in the '''Downloads''' section. You might need to click on the '''Browse''' button to find out exactly where they are going.
Once you know where the downloads are going to, you can go directly to that location and open them from there.
Hope this helps.

Enhancement for updating accounting document in MIGO

When doing MIGO, material document gets generated in background. I would like to pass this material document num (mkpf-mblnr) to the assignment field of GR/IR line item of accounting document (BSEG-ZUONR)

Hi, Thanks for u r response. it is giving problem
My requirement : Transaction is : MIGO
Before posting of material document, update material document number in assignment field of GR/IR line item of accounting document (WE) at number commitment stage
Update MKPF-MBLNR (Material Document Number) in BSEG-ZUONR
but already i tried AC_DOCUMENT i got a problem .
What i did,
first use MB_DOCUMENT_BADI with method
             mb_document_before_update.
here i tried to get the material document and export into memory
after use AC_DOCUMENT With method
               change_after_check.
here Import the material document doc num and pass it to Assignment field in
but it is not working
when i debug first trigger the   AC_DOCUMENT   And then it goes to   MB_DOCUMENT_BADI
Plese help me regarding this.
Edited by: vsreelakshmi on Feb 9, 2012 5:23 AM
Edited by: vsreelakshmi on Feb 9, 2012 5:29 AM

Auto-Update Open Documents?

I am having a few problems with a recently installed version of Photoshop CS4.
Before posting, I installed the newest Aug 21 drivers for the built in NVIDIA GeForce 6200 SE Turbo Cache card running on a Windows XP machine.
Symptoms:
1: When opening a file for the first time, all "open" commands are grayed out in the File drop down menu. I can do a Control-O to open or Control-N to create a new document and after doing so, the menu items are available to me.
2: After applying an adjustment layer, such as a Curves adjustment layer, I can adjust the curve and the current image changes correctly. However, if I apply a gradient to the layer mask, it will not display the gradient in the gradient icon until I touch one of the S curve points. If I make a different gradient, I have the same issue.
3: If were to delete the adjustment layer by dragging it to the trash, the current image does not update and I have to click one time on the image to make it display correctly.
There may be other problems, but these are plenty to deal with right now.
I tried going to the preferences and turning off OpenGL and ended up with the same problems.
I tried checking Auto-Update Open Documents and got the same results whether it is on or off.
I am not sure what Auto-Update Open Documents does, but it sounds like the correct issue.
Any help would be appreciated. CS3 works fine on this system.
M Jackson

Hello Mylenium
You probably have the correct answer. I've run CS2 and CS3 on this system and it has done an okay job, though I know it is showing its age now. I have a Vista laptop and don't care for it that much, so I haven't been too excited to buy a new desktop with that operating system on it. And, of course, I hate to buy an expensive video card and power supply to run this XP machine.
With Windows 7 on the horizon, I may just use CS3 a while longer and see how the new system works before upgrading to a new computer. Either way, I have a $1500 software package here that isn't getting much use.
M. Jackson

5.1 updated iCloud documents.

5.1 updated iCloud documents. Now I can not edit them until I update my apps. Why would the iCloud files change without my knowledge. I found myself without wifi and the update surprised me. I was prevented from working.
Anyone else bitten by his "feature?"

Not bitten, but noticed it.
The older Pages 5 and 5.01 wouldn't even open their own templates.
Just part of the on-going trainwreck that is Pages 5.
Peter

TS3991 status never updates from waiting (rMBP never seems to update any documents in the cloud)

I have 2 macs at home; the imac (latest 10.8.2) works fine, but my rMBP will not update pages documents in the cloud. anything that is opened/modified will show a dotted outline cloud and will say that it's pending the update, but it never happens. Any thoughts?

I have 2 macs at home; the imac (latest 10.8.2) works fine, but my rMBP will not update pages documents in the cloud. anything that is opened/modified will show a dotted outline cloud and will say that it's pending the update, but it never happens. Any thoughts?

Any way to update PO document through DTW without using "Doc Entry"

Dear all,
Just have a question.
I need to use DTW to update existing PO document. I realized that I have to have Doc Entry to be entered in the DTW template.
Is there any way to update PO document through DTW without using that field, "Doc Entry"?
thanks
Tony

Tony,
A similar situation related to Bank files was resolved with one of my clients on the following way...
The file from the Vendor can be an any order or format on the Excel. Till the time it is consistant it should work fine..
We created a Job in SQL Server to read this Excel file and to use the DocNum to get the DocEntry from SAP PO and output another excel file which is exactly the template format for PO Update.
This may even not be required in your case.....
You can get this done through an Excel Macro....which will connect to the database and using the DocNum get the DocEntry and update the Excel....
This is 100% achievable and a better solution for regular use
Suda

Business place update in document

Hi Experts,
We are not able to update business place in posted document. Pl. suggest.
Regards,
Jayanthi

Hi,
     Thanks for sending the replay,
     I had already update the Material document through the J1INPP T. code. but it not use for update FI
     Document and i want to update Business Place & Section Code in FI document.
     Please suggest,
Regards
Abhijeet

IDOC user exit to update the document flow of the delivery

Hi all,
Scenario:-
There is an inbound idoc for delivery through which the delivery is getting posted ...while reprocessing the idoc (BD87) i need to update the dates on document flow of the delivery. The date to be updated is coming from the idoc.
I have the function module(RV_DOCUMENT_FLOW_UPDATE_U) to update the document flow but i am not sure in which user exit it can be placed. I tried checking for some exits but nowhere i can find the delivery number to which i need to update through the FM.
I am using the standard idoc with the message type as -DELORD and the basic type as 'ORDERS03'.
Kindly provide user exit where i can use the date coming from the idoc (IDOCDATA) and where i can find the delivery no also.
Thanks,
Neslin.
I have closed the other thread there is no more duplication.

I already checked VEDA0001, but the tables for the delivery is not getting populated as it is processing through BD87(Reprocessing Idoc). Is it advisable to use the export import parameter?. Exporting the idoc data from any of the user exit in VEDA0001 and importing it in some other exit where the vbeln is available.?
Thanks,
Neslin.

Idoc user exit to update the document flow of delivery

Hi all,
Scenario:-
There is an inbound idoc for delivery through which the delivery is getting posted ...while reprocessing the idoc (BD87) i need to update the dates on document flow of the delivery. The date to be updated is coming from the idoc.
I have the function module(RV_DOCUMENT_FLOW_UPDATE_U) to update the document flow but i am not sure in which user exit it can be placed. I tried checking for some exits but nowhere i can find the delivery number to which i need to update through the FM.
I am using the standard idoc with the message type as -DELORD and the basic type as 'ORDERS03'.
Kindly provide user exit where i can use the date coming from the idoc (IDOCDATA) and where i can find the delivery no also.
Thanks,
Neslin.
Edited by: neslin on Jul 12, 2010 5:44 PM
Moderator message: cross-post locked.
Edited by: Thomas Zloch on Jul 12, 2010 2:27 PM

Check for the enhancement VEDA0001
Go to smod and refer to the further documentation for the same..
Hope it helps.
Thanks and regards

How to create or update 'change document' for crm order

Hi all,
i want to create or update change document records via program . And which method could be used (FM or ...) ?
I find there is a fm 'CRM_ORDER_WRITE_DOCUMENT' . But seems not available?
any good idea ?
BR.

Hello
You can refer to FM:CRM_ORDER_CHANGE_DOCS_CREATE. In this FM, the change documents are set.
But I don't recommend to create or change standard change document by your own logic because of view of the internal control. Changing the change document by user own logic has possibility to make the falsification.
Regards,
Masayuki

Updation of documents

Similar Messages

Maybe you are looking for