Upgrade 11.5.10 to R12

Hello Friends
We are currently analysing several proposals from implementers to upgrade our environment from 11.5.10 (DB9.2.0.5) to R12 with 11g DB.
What are the technical(APPS/DB) we should pay attention while evaluating the proposals.
What are the tricky parts we should pay attention.
Kam.

Hi;
Please check upgrade advisor. Also check your custom development
Custom form upgrade 11i to R12
Planning to upgrade from 11i to R12
Oracle Custom 11i Forms compatablity in Oracle R12
Oracle Custom 11i Forms compatablity in Oracle R12
How To Migrate My Customized reports & Forms To R12?
How To Migrate My Customized reports & Forms To R12?
Upgrade Advisor: E-Business Suite (EBS) Technology Stack Upgrade from 11.5.10.2 to 12.1.2 [ID 253.1]
Regard
Helios

Similar Messages

OBIEE 11G Implemented - Upgrading Oracle EBS 11g to R12

We have OBIEE 11G implemented and are currently sourcing the data from Oracle EBS 11g. We are upgrading our source database to R12 and need to know the impact on our Informatica mappings. Can anyone point me to some documentation, or have leave some helpful hints on how to proceed with this project. Thanks.

Hello,
I assume you are using BI APPS, there shouldn't be any impact on informatica mappings. Informatica comes with prebuit adapters for EBS 12 version, you need to use ORAR12 adapter.

Upgrading Oracle Order Management from R12.1.1 to R12.1.3

Hi Forum,
Currently we are on Oracle R12.1.1 and we have a requirement to upgrade only the OM section of Oracle EBS (Order Management module) to R12.1.3. In order to do this what are the patches that we need to apply? Any specific Oracle Support note we can refer to?
Thanks,
Chamil

Currently we are on Oracle R12.1.1 and we have a requirement to upgrade only the OM section of Oracle EBS (Order Management module) to R12.1.3. In order to do this what are the patches that we need to apply? Any specific Oracle Support note we can refer to?You cannot upgrade certain module and in order to go from 12.1.1 to 12.13 you need to refer to:
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
If you want to get the latest OM patchset, please refer to:
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
MOS > Patches & Updates > Recommended/Latest R12 Patchsets
Thanks,
Hussein

Upgrade R11.5.10 to R12.1.3-- please share your experience

Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance

user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Upgrading R11.5.10 to R12.1.2 - impact on XML Gateway and OTA

Hello,
We are testing upgrade of R11.5.10 to R12.1.2 and its impact on XML Gateway and OTA. We have all working well, but not the OTA.
Outbound:
The messagess are present in the ECX_OUTBOUND queues but are not send out.
Inbound:
Inbound endpoint https://server.com/servlets/oracle.apps.ecx.oxta.ECXOTAInbound returns not found or R12
Testing https://server.com/OA_HTML/US/ECXOTAPing.htm results in redirection to
https://server.com/webservices/TransportAgentServer and that returns not found
https://server.com/OA_HTML/US/ECXOTAInbound.htm displays only information about redirection and it redirects
to https://server.com/webservices/ECXOTAInbound and it is also not found
Results of:
SQL> @$ECX_TOP/patch/115/sql/ecxver.sql
ECX_UTL_XSLT_DIR Profile :
/usr/tmp
ECX_OAG_LOGICALID Profile :
ECX_SERVER_TIMEZONE Profile:
ECX_SYS_ADMIN_EMAIL Profile:
[email protected]
ECX_XML_VALIDATE_FLAG Profile: Y
ECX_XML_MAXIMUM_SIZE Profile : 2000000
utl_file_dir :
/ORACLE/DB/admin/tmp
Oracle XML Developers Kit 11.1.0.7.0 - Production
Parser Version Ok
XML Gateway Status Summary
XML Parser Version OK
All ECX Objects Valid? OK
All XML Parser Objects Valid? OK
OTA Running? N/A*
Total Messages on Outbound Queue 9
OTA Msgs on Outbound Queue 8
Others Msgs on Outbound Queue 1
Messages on Inbound Queue 0
*Please use the ECXOTAPing.html as described in the Testing Oracle Transport
Agent section of the User's Guide
End of Summary
Service Component Control Event Subscriptions
EVENT_NAME RULE_FUNCTION OUT_AGENT STATUS
oracle.apps.ecx.inbound.message.process [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.process [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.process [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected]COMNot Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected]COMNot Defined ENABLED
oracle.apps.ecx.processing.message.callb [email protected] Not Defined ENABLED
ack
oracle.apps.ecx.processing.message.error [email protected] Not Defined ENABLED
oracle.apps.ecx.processing.message.error [email protected] Not Defined ENABLED
oracle.apps.ecx.processing.message.error [email protected] Not Defined ENABLED
oracle.apps.ecx.processing.message.error [email protected]SERVER.COM Not Defined ENABLED
oracle.apps.ecx.processing.notification.send [email protected] Not Defined ENABLED
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Thank you in adavance for your help,

Hi,
Run the diagnostics script in (Note: 732295.1 - R12.0.6+ : Oracle Application Object Library XML Gateway Engine Setup Test) and see if it returns any error/warning messages.
Regards,
Hussein

Upgrade from 11i ocp to R12

Dear All
I have a OCP 11i Financials Payables, how can i update it to R12. or can can i write the r12 receivables exam. or is their any upgradation exam to r12 from 11i.
Regards

I have a OCP 11i Financials Payables, how can i update it to R12. or can can i write the r12 receivables exam. or is their any upgradation exam to r12 from 11i. Please see this link.
Certification Upgrades -- E-Business Suite
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=44
You can upgrade from "11i Financials OCP, Payables or Receivables" to:
- Oracle EBS R12 Supply Chain Certified Expert Consultant, Purchasing
- Oracle EBS R12 Financials Certified Expert Consultant Receivables
- R12 Advanced Supply Chain Planning Consultant Certified Expert
Please also see:
Oracle E-Business Suite R12
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=142#2
Thanks,
Hussein

Upgrade from 11i projects to r12 projects

Can anyone provide me with a document on how to upgrade from existing 11i projects to R12 projects?
Or if you let me know the pre-requisites that would be of great help me to me.

You will need to follow the standard R12 upgrade process. You will first need to upgrade to 12.1.1 (http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121upgrade.pdf), then apply the R12.1.3 patch (MOS Doc 1081434.1- Oracle Projects Release 12.1.3 Readme)
MOS Doc 256.1 (Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2) may also be relevant.
HTH
Srini

How to Upgrade Workflow from 11i to R12

Hi,
We are upgrading our Oracle Application environment from 11.5.9 to R12. Currently we are using iExpense and PO Approval workflows. After doing upgrade in development environment, I expected to see workflow files being overwritten by R12 standard workflow processes. However I found my custom workflow processes in upgraded R12 environment. Does anybody has any documentation which can help me to understand what should I expect and how do I upgrade my customized workflow processes?
Best Regards,
Dhaval Khamar

I expected to see workflow files being overwritten by R12 standard workflow processes. However I found my custom workflow processes in upgraded R12 environment.Was there any update on those custom workflow processes? Have you tried to use/run them and see it they still work properly?
Please see this thread.
Upgrade Workflow 11i to R12
Thanks,
Hussein

Regarding Upgradation of fast formulas in R12

Can any one please tell me what is the upgradation done in R12 for fast formulas compared to 11.5.10.

Actually i heard that there is some feature called[b] formula configurator in R12. But i am not able to find any documentation on that. it would be of great use if some one can provide me with some info. on that.

Upgrade to E-Business Suite R12.1.3 from 12.1.1

Hi,
I have a fresh install of R12.1.1 with rapidwiz and I also installed the prereq patch# 9239089 (ad.delta.3). Can I go ahead and apply Patch# 9239090 (R12.1.3 Maintenance Pack), or do I have to patch the default Oracle Application Server installation?
Thanks,
Sinan

I have a fresh install of R12.1.1 with rapidwiz and I also installed the prereq patch# 9239089 (ad.delta.3). Can I go ahead and apply Patch# 9239090 (R12.1.3 Maintenance Pack), or do I have to patch the default Oracle Application Server installation?
You need to complete all the steps in (Oracle E-Business Suite Release 12.1.3 Readme (Note 1080973.1)) -- i.e. Apply Patch# 9239090 and patch the default Oracle Application Server installation and apply other necessary patches as per the doc.
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
Thanks,
Hussein

Oracle E-Business Suit Upgrade from R12.0.6 +10.2.0.3 to R12.1.3 +11.2.0.2

Dear Experts,
Let me update you that one of our client is looking to upgrade their Oracle E-Business Suit Verion from R12.0.6 to R12.1.3. and database version from 10.2.0.3 to 11.2.0.2.
Current all the financial and SCM modules are implemented on there production instance.
We would like to know what are the pre and post upgrade activities needs to be performed ?
What are the list of patches which needs to performed while doing an upgade from
R12.0.6 to R12.1.1 - R12.1.3.
Regards
Mohammed.

Please advise on the below approach....
R12.1.1 to R12.1.3 upgrade high level steps
Install upgrade / EBS Patch
Pre-install R12.1
1. Setup hardware.
2. Install and setup OS.
Install R12.1.1
3. Install R12.1.1 (run Rapid Wiz)
Post –Install R12.1.
4. Upgrade Opatch in 10.1. home
5. Upgrade /patch OAS 10.1.2.3 (inc in R12.1.1)
6. Redeploye forms.ear
Pre-install R12.1.3
7. Upgrade OPatch in database home
8. Upgrade OPatch Database in 11.1.0.7
9. Upgrade OPatch in 10.1.3 Home
10. Upgrade /Patch OAS 10.1.3.4 to .5
11. Upgrade Java to 1.6_0_17 or lower
Install R12.1.3
12. Apply EBS R12.1.3 maintenance pack

11.5.10.2 to R12.1.2 Upgrade Clarification

Hi All,
We are currently planning to upgrade our 11.5.10.2 Ebiz to R12.1.2. Recently we have done the patching on 11.5.10.2 to bring it up to the extended support level by applying the patchsets specified in Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 [ID 883202.1] metalink note.
We have not applied the latest product patches and we have only applied the patches required for Extended Support. Now in order to upgrade to R12.1.2
1) Do we need to apply all the latest family patches and mini packs on 11.5.10.2 for each module/product before or during upgrading to R12.1.2 ?
2) Our database is at 10.2.0.5, do we need to upgrade it to 11gR1 ?
3) Do we need to apply any additional patches over the extended support level before R12.1.2 upgrade?
As per the Oracle documentation for R12.1.2 Upgrade I found the following step that created the doubt for me
"12. Apply latest product patches (required)
Applies to 11i release level: All
TUMS step key: N/A
3-6 Oracle E-Business Suite Upgrade Guide
Determine the latest product-specific patches. Then, download the American
English patches. Using AD Merge Patch, create a merged patch and apply it to your
Release 12.1.1 APPL_TOP."
Regards
Sridhar M

1) Do we need to apply all the latest family patches and mini packs on 11.5.10.2 for each module/product before or during upgrading to R12.1.2 ?
No - you will lay down a new filesystem when you install 12.1 so it is not necessary to apply the latest family patches and mini packs.
For the upgrade check Note 954704.1 - R12.1 Oracle Financials Critical Patches for the latest pre-upgrade patches before upgrading.
These are the only critical patches that you need to apply that are not called out in the 12.1 upgrade quide
2) Our database is at 10.2.0.5, do we need to upgrade it to 11gR1 ?
No - you will still be on a certified configuration but upgrading to 11gR2 would be recommended.
3) Do we need to apply any additional patches over the extended support level before R12.1.2 upgrade?
No, just apply what is in the 12.1 upgrade guide and in Note 954704.1 - R12.1 Oracle Financials Critical Patches for the latest pre-upgrade patches before upgrading.
Please check out our free Maintenance Wizard tool which automates most of the steps to upgrade you EBS to 12.1 and your database to 11gR2.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=215527.1

R12.1.1 / 11.1.0.7 upgrade : Error with 10.1.3.4 patchset upgrade

All,
We are on 12.0.2 / 10.2.0.2 (non-rac) in a split-tier architecture. Web/Forms on the Linux node and Concurrent Managers/Database on the Solaris node. We are now on a project to upgrade this environment to 12.1.1 on 11.1.0.7 db. (Non RAC,Non ASM)
Here are the high level tasks that i laid down
-- Create a project instance (clone from Prod)
-- Upgrade db to 10.2.0.4 from 10.2.0.2
-- Upgrade the techstack Oracle Homes (10.1.2 and 10.1.3)
-- Upgrade the JDK to 1.6.0_X
-- Upgrade 12.0.2 to R12.1.1
-- Upgrade the database to 11.1.0.7
PS: Direct ugprade from 10.2.0.2 to 11.1.0.7 needs us to be on R12 RUP4. So, i decided to do 10g upgrade as an intermediate step. We are following 752619.1 and all the notes that it refers.
We are hitting an issue upgrading the 10.1.3 Oracle home on the Solaris node. The same upgrade completed fine on the Linux node. Here is the description of the issue.
The runInstaller for 10.1.3.4 patchset expects OPMN to be running for a successful patchset installation. On a node with just batch processing enabled, OPMN does not run by default. The installer tries to start OPMN and errors out saying
========
OPMN is failing to start. OPMN must be started in order to correctly install and configure the patchset. Please start OPMN ma
nually in order to continue with the patchset installation.
=========
This is when the installer is at 83%
We tried to start OPMN and managed processes manually using adopmnctl.sh
OPMN starts and is able to start the HTTP server too but not any of the OC4J container components (oacore,forms and oafm). Here are the errors
==========
ias-instance id=afcprj_swafcdev1.swafcdev1.sherwin.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/oacore/default_group/
Error
--> Process (index=1,uid=1861636864,pid=17677)
failed to start a managed process after the maximum retry limit
Log:
/swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
oup~oacore~default_group~1
ias-component/process-type/process-set:
default_group/forms/default_group/
=========
The logfile that it points to does not have any errors. Looking into the other log files within $LOG_HOME/ora/*3/
, we get the following error in oacorestd.err
=========
09/10/05 16:07:10 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
09/10/05 16:07:15 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
09/10/05 16:07:17 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
========
I saw some notes and tried updating the config xml files and removed the references to oracle.ws.jaxrpc but to no help.
Installer log has the below error when we attempt the "retry" operation in installation screens.
========
fileName = NonExistentFile
searchString = NonExistentString
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
===========
Any help on the above issue? We are never going to use OPMN on this node but stuck here currently !!
Deviating a little bit, if we have to consider moving the concurrent managers out of database node to the
web/forms node (just to avoid having to maintain 2 appl_tops and getting away with doing the above tasks 2 times)
, what are the various things to consider?
-- Network latency
-- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)
-- We are aware that we might have to move the custom top and test custom programs (especially host programs).
Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?
One last question: Why are these adoacore/adoafm scripts taking a long time?
Any feedback is highly appreciated.
Thanks,
Arun

Hi,
Error
--> Process (index=1,uid=1861636864,pid=17677)
failed to start a managed process after the maximum retry limit
Log:
/swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
oup~oacore~default_group~1
ias-component/process-type/process-set:
default_group/forms/default_group/Please try the suggested solution in Note: 555214.1 and see if it helps.
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryExceptionCould you please verify that permissions are set correctly on the application tier node files?
-- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)Please see (Note: 373611.1 - How to move Concurrent Processing Server from one node to another node) -- Step 3 to 7
-- We are aware that we might have to move the custom top and test custom programs (especially host programs).
Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?I would suggest you relink all executable files via adadmin and check then.
Regards,
Hussein

Upgrade 11i to R12

Hi experts,
I need to upgrade my ERP 11.510.2 to R12.
Please suggest some ID or link to do the same.
second please let me know which version of R12 I can upgrade max to max from 11.5.10.2
thanks in ADV

Hi;
Similar topic discussed here before,please check them.If you have any question update thread
R12.1 upgrade from 11.5.10CU2 with 11g
Upgrade 11.5.9 to 12.1.2 11.5.9 to r12.1.1
http://forums.oracle.com/forums/ann.jspa?annID=772 << Steven Chan post
12.0.6 to 12.1.1 (or 12.1.2 or Fusion) upgrade
You can move to R12.1.2 from r11 for a now.
Regard
Helios

R12.1.1 upgrade from 11.5.10.2 - Can remove 11i file system before upgrade?

I am looking at doing the R12.1.1 upgrade on our 11.5.10.2 production system, I have done the upgrade in our Test enviornment already. Our production system has less disk space on the path with the current 11i system that will be the same location as the upgraded R12 filesystem.
Is it ok/possible to backup the 11i structure to another path prior to the R12 upgrade or does the R12 upgrade installer need the 11i file structure to be in place while upgrading?
Thank you for your help.

I am looking at doing the R12.1.1 upgrade on our 11.5.10.2 production system, I have done the upgrade in our Test enviornment already. Our production system has less disk space on the path with the current 11i system that will be the same location as the upgraded R12 filesystem.
Is it ok/possible to backup the 11i structure to another path prior to the R12 upgrade It is OK/Possible.
Oracle E-Business Suite Upgrades and Platform Migration [ID 1377213.1] -- "11i to R12 Upgrade " section.
or does the R12 upgrade installer need the 11i file structure to be in place while upgrading?No, you just need to copy the custom files you have from 11i APPL_TOP to R12 APPL_TOP
Thanks,
Hussein

Upgrade 11.5.10 to R12

Similar Messages

Maybe you are looking for