Upgrade agent using agentDownload.solaris -u

Hello,
Has anyone being able to upgrade the OEM agent from version 10.2.0.1.0 to 10.2.0.2.0
using agentDownload.solaris script and the -u option?
OMS version is 10.2.0.1.0
The command I ran was
./agentDownload.solaris -b $AGENT_HOME -o $OLD_AGENT_HOME -u
./agentDownload.solaris -b /opt/oracle/10Agent -o /opt/oracle/10Agent -u
Then it fails at
Initializing Java Virtual Machine from /tmp/OraInstall2007-05-28_09-47-38PM/jre/1.4.2/bin/java. Please wait...
Completed with Status=255
I have used the agentDownload script to install 10.2.0.1.0 in the past.

You need to apply the 10202 agent patch on 10202 agent oh
-u option use if u want to upgrade 10.1.0.X-->10.2.0.X

Similar Messages

Upgrade agents from OEM 10.2.0.5 from 12c not using Upgrade Console

Hi,
As we have to upgrade more than 100 agents from OEM 10.2.0.5 to OEM 12.1.0.3, don't have oracle account passwords (OEM 10g agents are runing as the oracle accout), and PAM authentification is not working for our environnement (SR open) we want to know if there is a workaround for upgrading agents and not using the upgrade console.
Regards,
Nicolas

Hi, the response from the support is upgrading all our agents to 11g and then upgrading to 12c it seems a bit complicated isn't it (more than 100 agents to migrate) ?
And as the migrate from 10g to 12c is nothing more than many automated actions I can believe that it can't be done manualy (just the install and configure agants).
Regards,
Nicolas

Net-SNMP 5.0.9 used in Solaris 10 sma

We are using AgentX protocol in an application sub-agent
According to Net-SNMP change log, AgentX protocol support was experimental up to release 5.0.7 but going to the following link:
http://net-snmp.sourceforge.net/tutorial/tutorial-5/toolkit/demon/index.html
"The AgentX support in net-snmp versions prior to 5.1 is beta level quality. Although many people have used it successfully, we strongly recommend AgentX sub-agent developers use 5.1.2 or higher."
Why is the Net-SNMP version so low in the Solaris 10 sma build? Cureent version is 5.3.0.1

Hello.
I would also like to know how to upgrade the version of net-snmp that the System Management Agent uses so that I can monitor servers with more than one CPU.
Any guidance much appreciated.
Thanks

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Upgrade Agent to 11g to run on 10.2.05 repository

Hello.
I want to upgrade our 10.2.0.5 agent to 11.1.0.1.0 and have confirmed that this is supported via Certifications on Metalink.
Does anyone have experience of this procedure?
Regards,
DA.

Steps for the upgrade are thus:
Upgrade Procedure, as per Upgrading Oracle Management Agent Using a Response File from Oracle® Enterprise Manager Grid Control Advanced Installation and
Configuration Guide
11g Release 1 (11.1.0.1.0)
Part Number E16847-10
http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/upgrade_agent_usng_rsp.htm#CEGIDJFC
To upgrade an existing Management Agent using a response file, follow these steps:
1.
Backup Agent Home and set Registration Password.
Backup the exisiting Agent Home
cp -R /oraoem/agent10g /oraoem/pre_upgrade_agent10g
set a Registration Password in Grid Control
In oraoem’s bash shell, set an environment variable for $AGENT_INSTALL_PASSWORD
2.
Prepare Response File.
Navigate to and edit the response file upgrade_agent.rsp as described here:
edit rsp file, as per Oracle doc, and set 2 values:
OLD_BASE_DIR
If you have the default name for the Oracle home of your existing Management Agent, that is, agent10g, then specify the path to the old installation base
directory where the Management Agent to be upgraded is residing.
For example, if the Management Agent is residing in /john/OracleHomes/10.2/agent10g, then specify only /john/OracleHomes/10.2/
ORACLE_AGENT_HOME_LOCATION
Specify the location where the Oracle home of the Management Agent (agent11g) can be created.
Therefore:
The old installation base directory where the Management Agent to be upgraded is residing =
OLD_BASE_DIR = /oraoem
ORACLE_AGENT_HOME_LOCATION = /oraoem/agent10g
3.
Stop the Agent and Invoke installation.
Stop the Management Agent you want to upgrade.
as oraoem emctl stop agent
Invoke the installer:
If you have the default name for the Oracle home of your existing Management Agent, that is, agent10g, then: run the following command:
./runInstaller -silent -responseFile /<path to upgrade_agent.rsp>
4.
Post upgrade tasks.
After you upgrade verify the installation:
emctl status agent
Run the following command to see a message that confirms that EMD upload completed successfully:
$<ORACLE_HOME>/bin/emctl upload
manually run the root.sh script as a root user from the Oracle home of the Management Agent:
as oraoem stop the agent
emctl stop agent
as root run the root.sh
<Oracle_Home>/root.sh
start agent
emctl start agent
DA

Calendar agent using all memory.

I am running a late 2012 iMac running Mavricks. This morning my computer hung. After rebooting it it hung again in a few minutes. I ran activity monitor and noticed that the calendar agent process slowing uses all the memory and then the OS starts using virutal memory on disk causing the computer to be ususable. I found an article to run off the calendar agent that fixes the issue for now.
launchctl unload -w /System/Library/LaunchAgents/com.apple.CalendarAgent.plist
Does anyone know why this all of a sudden would happen? I have not made any changes to my system recently, I use Gmail for my email and calendar.
Thanks!

I am using MacBook Pro 2014 Retina Display. Initially came with Mavericks and upgraded to Yosemite (10.10.2).
Had the same Problem. Calendar Agent took nearly 6 to 7 GB of the RAM and left me with 15MB ram. Got really irritated. But found this after a hard struggle. I tried the above solutions, think didn’t quite work for me.
Follow the steps you will get your problem solved.
Backup all the calendar events to your iCloud by enabling calendar in the internet accounts from system preferences. (Do this step only if you need your events to be there).
Then open TERMINAL and type.
chflags nohidden /Users/*******/Library
******* represents your username or the name in which your mac is started with. This name can be seen from "Macintosh HD” then “Users” then the user which you are..
After running the command then again type in TERMINAL
chflags nohidden /Users/*******/Library/Containers
Now close the TERMINAL after running it.
Now, open finder and goto "Macintosh HD” then to “Users” then the user which you are then “Library” then “Calendars”.
In “Calendars” you have got to delete some files.
Those are:
Calendar Cache
Calendar Cache- shm
Calendar Cache- wal
Email Cache.plist
Actually after deleting it,restarting PC solves the problem.
Sometimes you can’t delete those files because the Calendar Agent uses them and is running in background.
For that you have got to open Activity Monitor and Force Quit Calendar Agent and delete.
Restart your PC. Then open Calendar. Nothing happens and is back to normal.

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

You need a newer 2011 or later iMac to use Airplay.
Sorry.
For older Mac, look at an app called AirParrot
http://www.airsquirrels.com/airparrot/

Policy agent using https redirect to AM for authentication

We are using Access Manager 6 2005Q1.
Access Manager is running on box A & box B using the Sun Web Server as its front end web server. Box A & B both have a complete install of Sun Web Server, Access Manager, and Directory Server. The Directory servers are set up to replicate changes between each other. Our Policy Agents are running on box C & box D under the Apache web servers.
Users will access applications on box C/D via https. The policy agents on box C/D should redirect the user to box A/B (via a load balancer VIP)for authentication. The redirect will be https. Once authenticated the user should be redirected back to box C/D.
All subsequent communications between the Agents on box C/D to AM on box A/B (via load balancer VIP) are http.
Our load balancer is currently setup as active/failover because it does not support ssl with cookies.
In our AMAgent.properties file if I set 'com.sun.am.policy.am.loginURL = http://<lb-vip>:80/amserver/UI/Login' and access box C/D as https://<webserver>/<url> I am redirected to AM on box A/B for authentication. Once authenticated I am redirected back to box C/D and allowed access to <url>.
However, if I set 'com.sun.am.policy.am.loginURL = https://<lb-vip>:443/amserver/UI/Login' and access box C/D as https://<webserver>/<url> I am NOT redirected to AM and receive 'Forbidden You don't have permission to access /<url> on this server. Also in the agent log file I see:
     2006-01-30 12:42:30.792 Debug 28126:203470 PolicyAgent: in_not_enforced_list():enforcing access control for https://<webserver>:443/<url>
     2006-01-30 12:42:30.792 Debug 28126:203470 PolicyAgent: am_web_is_access_allowed https://<webserver>:443/<url>S, GET) no sso token, setting status to invalid session.
     2006-01-30 12:42:30.792 Debug 28126:203470 PolicyAgent: Policy Agent: am_web_is_access_allowed returned status=invalid session
     2006-01-30 12:42:32.800 Warning 28126:203470 PolicyAgent: am_web_get_redirect_url() unable to find active Identity Server Auth server.
     2006-01-30 12:42:32.800 Info 28126:203470 PolicyAgent: do_redirect(): Status Code= invalid session.
Interestingly if I set 'com.sun.am.policy.am.loginURL = https://<am-server>:443/amserver/UI/Login' and access box C/D as https://<webserver>/<url> I am redirected to AM on box A/B for authentication. Once authenticated I am redirected back to box C/D and allowed access to <url>. In this scenario the only difference is I am bypassing the load balancer.
Our networking people have monitored the load balancer in front of our AM boxes A/B and see the traffic going to AM in all cases.
From my standpoint it appears the agent is not able to successfully connect to AM via https when going through the load balancer.
Any help with this configuration issue is appreciated.

Bernhard,
From our AMAgent.properties... com.sun.am.policy.agents.version=2.1. Is there a way for me to tell if this is truely only 2.1 or 2.1-xx?
Because our LB does not support SSL with cookies we are currently configured as active/failover so all requests are going to the same AM server until it goes down, at which time I know users have to re-authenticate. Also we have set "com.sun.am.loadBalancer_enable = true" in AMAgent.properties.
We understand your point about loginURL. Infact there are two properties dealing with loginURL, com.sun.am.policy.am.loginURL and com.sun.am.policy.am.library.loginURL. Based on the comments in AMAgent.properties my understanding is that com.sun.am.policy.am.loginURL is where the user is redirected for login when no valid SSO token is found and com.sun.am.policy.am.library.loginURL is what the agent uses to authenticate itself "If the previously specified login URL must be exclusively used for redirecting users..." The interesting part is that if we set com.sun.am.policy.am.loginURL to use http everything works just fine, however if we set it to use https the user never gets redirected. Its almost like the agent is trying to connect there first before doing the redirect and can not.
Craig

Need guidance on using ddi_regs_map_setup solaris system call

Hi all,
Am a beginner in using Sun Solaris.
I am working on porting our source code from linux to solaris.
In Linux we are using inb/outb to read/write to keyboard data port(0x60) .
I know that there is an equivalent system call for inb/outb in solaris. But in man page(of sun os) it is mentioned that inb/ outb are obsolete. It was mentioned that we can use ddi_get8/ddi_put8 functions respectively.
ddi_get8 call requires ddi_acc_handle_t as a parameter which we can get it from ddi_regs_map_setup system call.
Syntax for this call is:
int ddi_regs_map_setup(dev_info_t *dip, uint_t rnumber,
caddr_t *addrp, offset_t offset, offset_t len,
ddi_device_acc_attr_t accattrp, ddi_acc_handle_t handlep);
Please let me know where does the 0x60 port number fits in the above system call and what does these parameters rnumber, offset, len corresponds to ?

Hi,
The Fault_PC 0x13575e8 tells you exactly where you
die. I assume you have used this in mdb on
the core file to find you are dying in the ddi_get8 call?
Are you checking return value of ddi_regs_map_setup?
Are you sure the register you are accessing is in register set 1?
Are there other places prior to the panic where
the ddi_get/ddi_put routines work correctly? A bus error
here generally means the location you are trying to access
does not exist on the device. (It could also be alignment,
but not with ddi_get8). The address
looks like 1fe.02001400, which looks like a possibly
valid address in I/O space.
I would print the value of wc->ioaddr to make sure
it is a valid virtual address.
Hi,
I'm in the middle of porting a device driver for a
PCI card from linux to solaris (it's wcfxo from
zaptel - part of asterisk).
>
WARNING: [AFT1] Bus Error on System Bus in privileged
mode from CPU0 Data access at TL=0, errID
0x0000000b.985ccf88
AFSR 0x00000000.84000000<PRIV,BERR> AFAR
AFAR 0x000001fe.02001400
AFSR.PSYND 0x0000(Score 05) AFSR.ETS 0x00
0x00 Fault_PC 0x13575e8
UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000
0000 UDBL.ESYND 0x00
panic[cpu0]/thread=2a10007dd40: [AFT1] errID
0x0000000b.985ccf88 BERR Error(s)
See previous message(s) for detailsThe actual code which seems to cause the panic is:
#define inb(a) ddi_get8(wc->devhandle, a)
ints = inb(wc->ioaddr + WC_INTSTAT);where there initialisation includes:
static struct ddi_device_acc_attr dev_attr = {
DDI_DEVICE_ATTR_V0,
DDI_STRUCTURE_LE_ACC,
DDI_STRICTORDER_ACC
ddi_regs_map_setup(wc->dip, 1, &wc->ioaddr, 0, 255,
&dev_attr,
&dev_attr, &wc->devhandle);I've tested the same card in a linux x86 box, and it
works fine, so I'm happy it's not a hardware
problem.
Any suggestions on what might be causing this?
Thanks,
Simon

Where can I upgrade to use DV capture?

Where can I upgrade to use DV capture?

invernessms
If your program is Premiere Elements 13 which no longer has the DV HDV Capture firewire, you can get a suggested Adobe workaround for the 13 situation.
Please refer to the following Adobe document.
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
ATR

CC&B 2.1.0 upgrade of use of Microfucos visual cobol from net express

Would there be any issue of upgrading the use of Microfocus Visual Cobol from Net Express?

starfry wrote:I don't know if it's related to your problem but GPG2.1 doesn't allow pass phrases to be specified in a file or on the command-line. See the page on unattended operation, look at "%ask-passphrase" and "%no-protection" https://www.gnupg.org/documentation/man … ation.html
Thanks for the link - that's only for gen-key, however. But I do confirm the "--passphrase-fd 0" is supposed to still be working as described in the current docs:
https://www.gnupg.org/documentation/man … ic-Options
--passphrase-fd n
Read the passphrase from file descriptor n. Only the first line will be read from file descriptor n. If you use 0 for n, the passphrase will be read from STDIN. This can only be used if only one passphrase is supplied.
So in theory the functionality hasn't changed. :-/

What's hardware should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?

What's hardware or software should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?
1st question: when i try to do editing by using Premiere CS4 AVCHD sequence timeline, the edting monitor seems not smooth (like wearing goggles) & delay, and when i use AME to encode m2ts file (which not yet edit) to AVI file (about 1 hour), it take 2h 13min to finish, is it normal?
2nd question: i use mpeg2 HD 1440 file to do eding, the edting monitor also not very smooth but better than using m2ts file, after editing done, i try to encode these mpeg2 HD 1440 file (which edited about long 1 hr) to a New file mpeg2 1440 X 1080i HQ or even mpeg2 Pal DV HQ file, the encoding was not runthe encoding after wait for half an hour. How many hours it take usually????
3rd question: i use m2ts file video file to export as a Bitmap, 1 frame 1 picture bitmap, it take long time too, about 1 or 2min to finish encoding, if i export more than 1 picture, it take even more time, i have experienced it, 3 or 4 pictures need about 10 or 15 min to finish encoding. i used to using mpeg2 HD 1440 file (which edited file) to export frame as picture, it not run the encoding at all. WHY ????
i'm new in Premiere CS4,so i got many question about Premiere CS4, usually i use Premiere Pro 1.5 version
my computer is: Intel (R) Core (TM) 2 Duo CPU
                         E7400 @ 2.80 GHz
                         2.80 GHz, 2.00 GB RAM
                         Graphic Card: ATI Radeon X1650 series
                        2 Hard Disks in my computer (C Drive is 300 GB (not sata) , D Drive is 500 GB sata)
4th Question: Premiere CS5 & Premiere CS4 which one is better ???
5th Question: What's different ATI Radeon and NVIDIA Card, which is better, which u suggest to. What is different Graphic Card and Video Card ?? Should i install HD Video Card ????

I don't think a core-2 will work very well with AVCHD... you need at least an Intel i7 920... or whatever is current
My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built... since the GTX 285 is no longer sold, I would now go with a GTX 460 or whatever is the current "best bang for the buck" - AND I would buy 4Gig-by-3Sticks memory to be able to expand from 12Gig to 24Gig if needed
For my home hobbyist, family movies (which means that I am not trying to recreate Star Wars with video effects or many layers) AVCHD editing is "as smooth as spreading warm butter on hot toast" (also the MP4 video from wife's Flip camera)
My 3 hard drives are configured as...
1 - 320G WD Win7 and all programs
2 - 320G WD Win7 swap file and PPro projects
3 - 1T WD all video files... read and write

What is the Upgrade program used to upgrade NW04 to NW04s

Hi,
What is the Upgrade program used to upgrade NW04 to NW04s?
Thanks Sri

<b>SAPup</b> - Program to upgrade Web AS ABAP and related components BW,XI
<b>SAPJup</b>- Program to upgrade WebAS Java and related components EP.
Vijay Kothapalli

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install my upgrade without using the cd's?

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Can Adobe Photoshop CS5 upgrade be used on 2 computers or just 1?

Can Adobe Photoshop CS5 upgrade be used on 2 computers or just 1?

You can have it installed on 2 machines but you can use only one at a time (laptop/desktop, home/work).
Nancy O.

Upgrade agent using agentDownload.solaris -u

Similar Messages

Maybe you are looking for