Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Similar Messages

  • How can I install Oracle Database 10g for Solaries (SPARC) from the console

    Dear Forum Members,
    In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
    If yes. Then How?
    If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
    Thanks
    Aungshuman Paul

    There are 2 possible ways to accomplish this.
    First,
    Silent installation
    http://www.informit.com/articles/article.asp?p=174771&rl=1
    Second, (cut/paste from other site)
    How to install Oracle software remotely?
    Remote Software Installation Steps: (For Solaris only)
    If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
    For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
    1. Pick your source server or machine for remote installation.
    2. Check that your CD is in your source CD-ROM drive.
    3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
    4. On the source machine, login as a user.
    5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
    6. Become root user by typing: su (don’t use -)
    7. Check that Volume Manger is running. # ps –ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
    8. If not then do the following: # mkdir –p /cdrom/your-cd-file-name
    9. # mount –F hsfs –r cdrom-device /cdrom/your-cd-file-name
    10. Add the following line to your /etc/dfs/dfstab file: # share –F nfs –o ro /cdrom/your-cd-file-name
    11. Verify whether your source machine is an NFS server: # ps –ef | grep nfsd
    12. If you see an entry that contains /use/lib/nfs/nfsd –a 16, then nfsd is running and skip to Step 16.
    13. If nfsd is running, then type: # /usr/sbin/shareall
    14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
    15. Verify whether your source machine is an NFS server again by typing: # ps –ef | grep nfsd
    16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
    17. Now, log in to the target machine by type: # rlogin target-machine-name –l user (not root)
    18. Then log in as the root user by typing: # su
    19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
    20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
    21. # mkdir /remote_products
    22. # /usr/sbin/mount –F nfs –r source-machine:/cdrom/your-cd-file-name /remote_products
    23. # cd /remote_products
    24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
    25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

  • Wu-ftpd installable for solaris 10 and solaris 9

    Hi,
    I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
    But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
    Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
    thanks,
    Amudha

    Hi Robert,
    Thanks for your reply.
    I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
    I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
    Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
    Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
    Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
    could any one help to resolve these issues? Thanks in advance for your help.
    Amdudha

  • I need the installer for 10.6.1.7 64, iTunes can you help?

    Pleas advise?... I need the installer for iTunes64 msi, can anyone out there help?..also is there a disk with Itunes on it for an install?

    Download iTunes Here...
    http://www.apple.com/support/itunes/install/
    dueeast47 wrote:
    is there a disk with Itunes on it for an install?
    Not that I am aware of...

  • OEM 12c for solaris (sparc) disk2 download failed

    I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
    Appriciate for your help.
    http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

    I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
    We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
    bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
    Archive: em12_solaris_sparc64_disk2of2.zip
    End-of-central-directory signature not found. Either this file is not
    a zipfile, or it constitutes one disk of a multi-part archive. In the
    latter case the central directory and zipfile comment will be found on
    the last disk(s) of this archive.
    unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
    em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
    However, this error message is caused by an invalid / incomplete zip file.
    I have also tried Oracle Edelivery site with same result.
    TIA!

  • Latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems download.

    Hi All,
    I hope someone can assist as this has given me a headache for the last few days.
    I require the latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems.
    I require the ISO and not just the Patch set.
    Please advise.
    Kind regards,
    Paul

    The current ISO (october) is available at the usual place : EIS for Partner
    And for information, the next planned EIS will be available very soon but not this month.

  • Java 1.8.0_31 for Solaris Sparc missing Firefox plugin

    Until now I didn't realize that Oracle planned to deprecate (Oracle) Solaris in favor of Linux.
    Since updates to Java 7 will be ending in April 2015, I thought it would be a good idea to migrate to Java 8.  I installed Java 1.8.0_31 on our Solaris 10 server and then tried to configure the Java plugin for Firefox.  Low and behold!  It is no longer supplied with the Java installation.  Apparently, when Oracle removed 32-bit support for java in Solaris, they removed Java Web Start (javaws.jar) and the Firefox plugin (libnpjp2.so) with it.  As I searched the web in vain for a solution, I recall that additional java functionality has been removed from the Java 8 build for Solaris as well, but I can't recall what they are right now.
    Of course, Linux remains fully supported!!  Too bad we invested in an all-Oracle solution for our aging Oracle Forms applications.  I guess now we need to stay on Java 7 until we can migrate off the high performance (Oracle) Solaris dinosaur to a better supported Linux platform.  Thanks Oracle for providing no risk solutions.
    I've submitted a ticket to Oracle Support regarding how to get past this issue, but I thought I'd throw it out here too:
    How can I run a java app (like Oracle Forms) using Firefox on Solaris without a Java plugin?

    Obviously Sun (excuse me, Oracle) does not intend to support the solaris-10/sparc/firefox-3.6 combination. Firefox 3.6 requires the NPAPI and/or NPRuntime interfaces to java, but oracle does not provide the new "libnpjp2.so" java plugin with the jre-6u18-sparc-solaris java download.
    A search at www.oracle.com does not turn up any support announcement about this. You have to learn it the hard way. :(
    If you want to continue to use sparc-solaris, downgrade to firefox-3.5 so you can use the old libjavaplugin_oji.so module. Otherwise run Linux or Mac OS X to stay in the unix camp.

  • OSB 2.6  installer for solaris 10 (64 bit) - required

    Hi,
    I am are not able find the installer for OSB 2.6 for solaris 10(64 bit).
    Where can I find the same?
    Thanks in Advance.
    Rajani

    Don't know what a service id is, but you will need to be an oracle customer, which I assume you are if you are requesting old software.
    here is the link I use
    https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5775706955868202591::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,763603.1,1,1,1,helvetica
    cheers
    James

  • Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

    [OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
    EM Binaries updated with bundle patch1 are now available on OTN
    OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
    Management Agents for platform::: HP-UX, or HP-UX Itanium
    The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
    http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
    Regards
    Akanksha

    Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
    Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
    The resulting application will be able to connect to databases from Oracle 8.1 onwards.

  • Where do I download Oracle ESB 10.1.3.4 for solaris sparc?

    Hi,
    Where can I download Oracle SOA Suite ESB 10.1.3.4(only ESB, BPEL is not required).
    I could find the following link:
    http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
    which has Oracle Enterprise Bus 10g (10.1.3.1.0). What is the patch number for upgrading this to 10.1.3.4?
    I believe we get latest Oracle Apps and database adapters out of box with ESB 10.1.3.4. If not please suggest me where I can get these.
    Also I need an SAP adapter which is not given by default with ESB 10.1.3.4. Please suggest me where I can download this from and how I install it.
    Please give me the links for downloading
    Oracle SOA ESB
    version - 10.1.3.4
    Operating system: Solaris Sparc
    Adapters: SAP, Oracle Apps and database.
    Thanks.

    Thanks Marc.
    I was not able to find the patch on metalink. Could you please give me the patch number specific to only ESB 10.1.3.4 if you have.
    I have the 10.1.3.4 patch number(7272722) for the complete SOA suite.
    Also please comment on adapters part.
    Thnaks.

  • Acrobat 9.1 for Solaris Sparc

    Hi,
    Have to start with, thanks for the 9.1 on Solaris x86 port, much needed since we where using version 4 which started to become old...
    But, we are still very much on Solaris Sparc, when is 9.1 planned to be be released since I would like to have the same version on both platforms.
    once again, thanks for 9.1
    Michael

    Hello Michael/Karl,
    In 9.1, there is no SPARC release, only x86.
    The latest SPARC compatible Adobe Reader version is 8.l.4
    We will keep you posted if any more developments arise.
    You may also visit our blog site (http://blogs.adobe.com/acroread/) to read about latest announcements/sneak-peaks etc.
    Thanks
    Atanu Dhar
    adharATadobeDOTcom

  • OEPE Install for Solaris Sparc 64 bit

    Hello Experts,
    OEPE (Oracle Enterprise Plug-in for Eclipse) issue....
    We have installed the below @ Sun Solaris 10, Sparc 64 Bit.
    Web Logic 10.3.6
    SOA 11.1.1.6.0
    AIA 11.1.1.6.0
    trying to install OSB (Oracle Service Bus) and it asks about the OEPE Install location and gave an error.
    INST-07246 -- Enter a Valid value for OEPE Home location..
    We have NOT installed OEPE, because it is NOT available for the version and the platform we have.
    The OTN doc says as below:
    Oracle WebLogic Server 11gR1 (10.3.6) + Coherence - Package Installer Size: .99 GB, Check Sum: 3179053739
    This download provides a WebLogic Server generic installer. This installer does not include a JVM/JDK or Oracle Enterprise Plug-in for Eclipse, these must be installed separately.
    Question(s):
    1) Where can I get the OEPE for Solaris 64 bit and SOA 11.1.1.6.0?
    2) Any other workaround for the OSB install issue??
    Thanks a lot
    Rgds
    Natrajan

    Hi Natrajan,
    I don't think there is a Oracle packaged OEPE for Solaris 64... There is a Linux 64 though, but I don't think that is what you looking for...
    Here you can see the available packages
    http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
    What you can do is to install Eclipse for Solaris... and then go to the link above and download a package "OEPE Plugins Only" and apply the plugins to your Eclipse
    http://archive.eclipse.org/eclipse/downloads/drops/R-3.6-201006080911/solPlatform.php
    Cheers,
    Vlad
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
    https://forums.oracle.com/forums/ann.jspa?annID=893

  • Also I need ndiswrapper support for solaris 10

    I have a linksys -G type router and my computer uses a Linksys Wireless-G PCI Adapter with SpeedBooster
    which works in Linux like mandrake , debian systems like knoppix and kanotix but their are some buggy like debian also that don't let me change the essid in debian but most linux works with the drivers for my card which are
    04/13/2004 10:01 AM 7,870 BCM43XX.CAT
    03/31/2004 08:44 AM 11,960 BCMWL5.INF
    02/19/2004 11:51 AM 300,928 BCMWL5.SYS
    normally you install the drivers with ndiswrapper -i BCMWL5.INF then use -m to add it too the model loader program in linux which adds wlan0 to ifconfig and iwconfig programs
    which also ndiswrapper requires the source code of the kernel to install the ndiswrapper right , it req. it too compile the drivers, and using the linux gui programs to setup essid and key wep info
    also I use a script in kanotix to use /etc/network/interfaces to load the info on bootup etc.. to get my wireless network card up in linux.
    also how the support for soundblaster sound cards in solaris 10, I have not fingured out if theirs sound yet. freebsd 5.4 seemed to be missing the sound support
    one more thing in bootup of the install program for Solaris 10 my geforce 6800 card detected right but my tv output was all wrong in since the picture , was only on the monitor and tv had stange graphics on it which did not look right I hope nvidia drivers fix this problem , Is their any different command needed for clone mode in Solaris 10 then free86 nd xorg scripts use?

    I got the solutiion from Canon Customer Serivce, temporary until the 10.10 download is released.  It works:
    "You can download the latest software updates at this address:
    http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_...
    Please select "OS X Mavericks v10.9" using the drop-down menu on the page.  You have to pick the previous version of Mac OS, because the options for OS X 10.10 Yosemite have not yet been populated.  I sincerely apologize for any confusion this may cause.  After selecting OS X 10.9, please click on the red triangle next to the word "Software" to see the software updates available for your computer.  I would recommend updating all of your software including EOS Utility and Digital Photo Professional."
    I never did find the drop-down menu, but I went into the site map and found what I needed.
    Barry

  • When will 11.1.0.7 will be available for Solaris (SPARC) (32-bit)?

    Hi
    Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
    The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
    Regards
    Mads

    Just became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

  • We need the installer for Acrobat 7.0 Pro Mac

    We downloaded the installers for Creative Suite 2 since the activation servers had been shut down. However, I cannot find the installer for Acrobat Professional that came with the Premium Suite.

    Ok sorry it has been quite awhile since CS2 was released.  If Acrobat 7 has a separate serial number then please use your original installation media.  If it doesn't have a separate serial number then everything you need is contained in the install files available at the link in message #1.
    Have you tried installing what you have already downloaded?  What version of Mac OS are you using?  Do you have a PowerPC equipped Macintosh?

Maybe you are looking for