Upgrade CFM and CML from 4.7 to ECC 6.0 Version

Dear all,
We have to Upgrade our customer installation since 4.7 to ECC 6.0.
Nowadays they use CFM and CML in 4.7. We wanted to know if the Upgrade of this functionalitty could be consider just as a Technical Upgrade or we need to implement new functionalities in the new version 6.0.
If the last option happend, wich are the steps that we should done?? This is to estimate the effort to Upgrade both functionalities.
Thanks in advance
Regards
Sandra

Hi,
There is many functional configuration also required in addition to technical upgrade.
You can refer to Notes 830077,805406 for migration guide.
Refer to below links as well
http://help.sap.com/saphelp_47x200/helpdata/en/ed/cf813ec8d3fe3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/ed/cf813ec8d3fe3ee10000000a114084/frameset.htm
Thanks
Amit Goyal

Similar Messages

Client wants to upgrade the R/3 from ECC5.0 to ECC 6.0, what is the impact

Client wants to upgrade the R/3 from ECC5.0 to ECC 6.0, what is the impact on BW 3.5.needs to upgrade any thing?.
Is there any impact in BW3.5 system.
This is very urgent.
Please respond immediatly.
Thanks
Vasu.

Determination of Prerequisites
Purpose
As parallel maintenance has been deactivated, you have to implement various measures, depending on how your system has been configured, when you upgrade to release SAP ECC 5.00, Financial Services (EA-FS500). These measures affect release levels SAP ECC 5.0 and SAP ECC 6.0.
Process Flow
Use the graphic and the subsequent documentation to check which activities are required in your system due to the deactivation of parallel maintenance. The process represented in the graphic is explained in greater detail in the following sections:
       1.      Check whether you use the Real Estate (RE-Classic) solution.
¡        If you do not use the Real Estate (RE-Classic) solution, no additional steps are required.
¡        If you use Real Estate (RE-Classic), additional checks are necessary.
       2.      Check whether, in addition to Real Estate (RE-Classic), you also work with a solution that uses the SAP Business Partner.
¡        If you only use Real Estate (RE-Classic), additional checks are necessary.
For more information about the activities to be processed, see Steps for Exclusive Use of Real Estate.
¡        If, in addition to Real Estate (RE-Classic) you also work with a solution that uses the SAP Business Partner, additional checks are necessary.
For more information about the activities to be processed, see Steps for Additional Use of an SAP BP Application.
Regards,
Subha

How can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

Hi All,
Can any one help, how to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
Given BADI name was----VENDOR_ADD_DATA_BI .
Thanks

Anil,
look at this thread ..may be this helps you.
Re: 824 IDOC and BADI/User Exit
sateesh.

How do I recover uploaded songs from CD's after upgrading Itunes and Ios from external drive with older Itunes version?

I upgraded to the newest version of Itunes on a new PC and the latest version of the IOS operating system for my Iphone 3GS and lost all of my songs that were uploaded from CD's.
Prior to the upgrade I tried to synch and got a message that I need to save all purchases of songs and apps otherwise I would lose them. I did and they saved. However all of the music that I uploaded off of CD's were not transferred. No matter what I did to get that music transferred from Iphone to Itunes prior to the upgrade it would not upload so I did the upgrade. All of my apps and purchased Itunes successfully went back onto my Iphone but all of my music that I loaded into Itunes are gone from Iphone and Itunes.
I had saved all of my songs on an external drive in an older version of Itunes. I would like to plug that in tonight and see if I can get those songs loaded onto my iphone but now am worried that it will try and synch what is on the Iphone into that version and erase all of my songs. Also I am afraid that any newly purchased songs directly onto the Iphone will be lost if I get all of the old data back.
What do I need to do?

The music sync is one way - computer to iphone. the ONLY exception is itunes purchases.
The songs from cd came from your computer in the first place, so they should still be there and should be included in your regular backup copy of your computer.

Upgraded hardware, and went from XP to Win7 - how do I transfer/install CS5 onto new SSD hard drive?

I recently upgraded all my computer internals; new mobo, Samsung SSD (solid state drive), CPU and ram. Also went from XP Pro to Win 7 Pro, with Win 7 Pro now residing on the new solid state drive. I still have the old 1TB Serial ATA hard drive connected as a storage device, and this is where CS5 resides. But of course, my CS5 applications are now unusable.
Can someone please give me some guidance as to how to transfer the CS5 installation from the old HD (XP Pro) to the new SSD (Win 7 Pro)? I started doing some research, and read about first "deactivating" CS5, but I cannot open any of my CS5 applications to "deactivate". So I am stumped. I am reticent to attempt a new install from my CS5 disks until I learn the proper process..........
Any advice would be greatly appreciated.
Dave F. in Rhode Island

don't transfer, reinstall.
if you need to reset your activation count, contact adobe support - http://helpx.adobe.com/x-productkb/global/service1.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Upgrade path and docs from 10.2.0.1 to 10.2.0.4?

Can someone point me what's the upgrade path from 10.2.0.1 to 10.2.0.4 and related docs? I did search in my metalink for upgrade patch from 10.2.0.1 above ... but it doesn't show anything for my Oracle version and platform (Linux x86).
Where should I look?

mishomor,
Here is the document id and it has stepwise instructions from 10.2.0.1 to 10.2.0.4
Doc ID: 730365.1 Subject: Oracle Database Upgrade Path Reference List (this document contains links to patchset and detailed installation and upgrade instrcutions)
1. Install the 10.2.0.4.0 patchset on top of 10.2.0.X.0 ORACLE_HOME
Patchset number is : 6810189
http://updates.oracle.com/download/6810189.html
2. Finish the post installation steps as per the patchset README (patch_note.htm)
http://updates.oracle.com/ARULink/PatchDetails/view_readme?plat_lang=912P&patch_file=&file_id=&password_required=&password_required_readme=&merged_trans=&aru=10032632&patch_num=6810189&patch_num_id=939957&default_release=80102040&default_plat_lang=912P&patch_password=&orderby=&direction=&no_header=0&sortcolpressed=&tab_number=&email=[email protected]&userid=ML-381723.992
Regards

Creating Datasource and Extracting from SAP R/3 ECC 6.0

Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KK

You can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps!

Open item ( balance) can be find in upgrade from 4.7 to ECC 6

Dear experts
We are planning to upgrade our SAP system from 4.7 to ECC 6
One of my consultant told me that only open balance willbe moved ( customer /vendor open items)
How can it be done for the user if he want to see the details of cleared invoices/payment for the vendor/customer ????
Is this the drawback in SAP system
Rregars
Shamul heq

I think the consultant is confused with Archiving, this is an upgrade and nothing will be lost!! all info for vendors, customers, old invoices, cleared invoices, etc will be there once the system is upgraded.
Regards,

What is the impact of R/3 upgradation from 4.7 to ECC 6 on BI

Dear all,
Can any one tell me what will be the impact of R/3 Upgradation on BI... as we are shortly going to upgrade our R/3 from 4.7 to ECC 6.
Do we need to take any precautions in R/3 and aswell as BI
Please give the information...points will be given
Regards
venu

Hi
Please Refer this as this vll give u the Pros and Cons for upgrade.
Refer
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
This Wiki contains Rob Moore's ( BW Manager, Edwards Limited) teams experiences in upgrading Business Warehouse System from 3.0B to BW 7.0.
Contents
1 Upgrading from BW 3.0B to BW 7.0 (Netweaver 2004s)
2 Introduction
3 Overview & Scope
4 Drivers
5 Environment
6 Resource & Timescales
7 High Level Plan
8 Summary Task List
8.1 #Support Pack Hike
8.2 #Plug-in installation
8.3 #PREPARE process
8.4 #Dbase upgrades
8.5 #System Upgrade
9 Lessons Learnt
10 Issues & Fixes
10.1 Unfixed Issues
10.2 Fixed Issues
11 Regression Testing Process
11.1 Introduction
11.2 Set up
11.3 Actions
11.4 Security
12 Transport Freeze
13 Web Applications
13.1 Dashboards
13.2 Internet Graphics Server (IGS)
14 Detailed Task Lists
14.1 Support Pack Hike (detail)
14.2 Plug-in installation (detail)
14.3 Dbase upgrades (detail)
14.4 PREPARE Process (detail)
14.5 System Upgrade (detail)
Upgrading from BW 3.0B to BW 7.0 (Netweaver 2004s)
Introduction
This Wiki contains my teams experiences in upgrading our Business Warehouse System from 3.0B to BW 7.0.
Hopefully it will be useful to anyone else who's about to embark on this. If there's anything I've missed or got wrong, then please feel free to edit it or contact me and I'll try to explain.
Rob Moore - BW Manager, Edwards Limited.
Overview & Scope
This was to be a technical upgrade of BW only. The new BW 7.0 web functionality & tool suite which requires the Java stack rather than the ABAP stack was out of scope. We had heard that the latter was where most of the problems with the upgrade lay. Our plan is to wait for this part of BW 7.0 to become more stable. Also it has a big front end change and the business didn't have sufficient resource to cope with that much change management.
Drivers
3.0B at the end of its maintenance
Opportunities to do better reporting
Options to utilise BI Accelerator
Environment
Our R/3 system was at 4.6C and was not going to be upgraded. We have APO at version SCM4.0.
Our BW system is approximately 300 GB, with 125 global users. It was at version 3.0B SP 18
We have Development, Acceptance and Production environments.
Resource & Timescales
The Project ran for 3.5 months from Feb to May 2007. We used the following resources. The percentages are the approx. amount of their time spent on the project.
Project Manager * 1 70%
BW technical team * 3 50%
ABAP coder * 1 10%
SAP Systems Development expert * 1 20%
Basis * 1 25%
High Level Plan
These are the basic areas. We planned to complete this process for each environment in turn, learning our lessons at each stage and incorporating into revised plans for the next environment. However we did the Support Packs and Plug-Ins in quick succession on all environments to keep our full transport path open as long as possible.
Upgrade BW to the minimum support pack.
Install R/3 Plug-ins PI 2004.1
Run PREPARE on BW
Dbase upgrades (Database & SAP Kernel upgrade)
System Upgrade
Summary Task List
This list contains all the basic tasks that we performed. A more detailed check list is shown below for each of the headings.
#Support Pack Hike
We moved only to the minimum acceptable SP as this seemed most likely to avoid any problems with the 3.0B system prior to the upgrade.
Apply OSS 780710 & 485741
Run Baseline for Regression tests
Full Backup
Apply SP's (we were at SP18, going to SP20)
SPAU list review
Regression testing
#Plug-in installation
Apply SAP note 684844
Import and patch Basis plugin PI 2004.1
SPAU list review
#PREPARE process
BW Pre-Prepare tasks
BW - Inconsistent Data fix
Run PREPARE
Review of results
Any showstoppers from PREPARE?
#Dbase upgrades
Database Upgrade (FixPak)
SAP Kernel Upgrade
#System Upgrade
Reverse Transport of Queries
Reconnect DAB & SAB to AAE
Run Baseline for Regression tests
Full Backup
Run the Upgrade
SPAU list review
Regression testing
Lessons Learnt
Testing is all! We picked up on a lot of issues, but would have picked up more if we'd had a full copy of our production environment to test over.
Our approach of doing a full upgrade on each environment before moving to the next one paid dividends in giving us experience of issues and timescales.
Write everything down as you go, so that by the time you get to upgrading production you've got a complete list of what to do.
We succeeded because we had people on our team who had enough experience in Basis and BW to be able to troubleshoot issues and not just read the manual.
The SAP upgrade guide is pretty good, if you can understand what they're on about...
Remember the users! The fact that the loads have been successful doesn't count for anything unless the users can see the data in Excel! There's a tendency to get caught up in the technology and forget that it's all just a means to an end.
Issues & Fixes
I've listed the main issues that we encountered. I have not listed the various issues where Transfer rules became Inactive, DataSources needed replication or we had to reinstall some minor Business Content.
Unfixed Issues
We could not fix these issues, seems like SP 13 will help.
Cant delete individual request from ODS
After PREPARE had been run, if we had a load failure and needed to set an ODS request to Red and delete it, we found that we could not. We raised an OSS with SAP but although they tried hard we couldn't get round it. We reset the PREPARE and still the issue persisted. Ultimately we just lived with the problem for a week until we upgraded production.
Error when trying to save query to itself
Any query with a re-usable structure cannot be saved (more thsan once!)
OSS 975510 fixed the issue in Dev and Acc, but NOT in Production! SP 13 may solve this once it's released.
Warning message when running some queries post-upgrade
Time of calculation Before Aggregation is obsolete. Not a big issue so we haven't fixed this one yet!
Process Chain Scheduling Timing error
Process chains get scheduled for the NEXT day sometimes and has to be manually reset.
See OSS 1016317. Implement SP13 to fix this. We will live with it for now .
Fixed Issues
Duplicate Fiscal Period values in Query
If you open up a drop down box ("Select Filter Value") for Fiscal Year/Period to filter your query, you are presented with duplicate entries for Month & Year.
Due to Fiscal Year Period InfoObject taking data from Master Data not InfoProvider. Thus it picks up all available periods not just Z2.
Auto-Emails being delayed
Emails coming from BW from process chains are delayed 2 hours on BW before being released
Due to userids that send these emails (e.g. ALEREMOTE) being registered on a diffferent timeazone (i.e. CET) from the BW system (i.e. GMT)
Pgm_Not_Found short dump
Whenever a query is run via RRMX or RSRT
Call transaction RS_PERS_ACTIVATE to Activate History and Personalisation
Characteristics not found
When running a query the warning message Characteristic does not exist is displayed for the following: 0TCAACTVT, 0TCAIPROV, 0TCAVALID
We activated the three characteristics listed and the warnings stopped. NO need to make them authorisation-relevant at this stage.(also did 0TCAKYFNM)
System generated Z pgms have disappeared
Post-upgrade the system Z-pgms ceased to exist
Discovered in Development so we compared with pre-upgraded Production and then recreated them or copying them from production.
Conversion issues with some Infoobjects
Data fails to Activate in the ODS targets
For the InfoObjects in question, set the flag so as not to convert the Internal values for these infoobjects
InfoObject has Conversion routine that fails, causing load to fail
The routine prefixes numeric PO Numbers with 0s. SD loads were failing as it was not able to convert the numbers. Presumably the cause of the failure was the running of the Pre-Prepare RSMCNVEXIT pgm.
Check the Tick box in the Update rule to do the conversion prior to loading rather than the other way round.
Requests fail to Activate on numeric data
Request loads OK (different from above issue) but fails to Activate
Forced conversion within the update rules using Alpha routine. Deleted Request and reloaded from PSA.
Database views missing after pre-PREPARE work
Views got deleted from database, although not from data dictionary
Recreated the views in the database using SE14.
Workbook role assignations lost
We lost a few thousand workbook assignments when we transported the role they were attached to into Production
The workbooks did not exist in Development, thus they all went AWOL. We wrote an ABAP program to re-assign them in production
Regression Testing Process
Introduction
We were limited to what we could do here. We didn't have a sandbox environment available. Nor did we have the opportunity to have a replica of our production data to test with, due to lack of disk space in Acceptance and lack of sufficient Basis resource.
Set up
We manually replicated our production process chains into test. We didn't have any legacy InfoPackages to worry about. We asked our super-users for a list of their "Top 10" most important queries and did a reverse transport of the queries from Production back into test (as we do not generally have a dev/acc/prodn process for managing queries, and they are mostly created solely in prodn). We made sure every application was represented. In retrospect we should have done some Workbooks as well, although that didn't give us any problems.
Actions
Prior to the various changes we loaded data via the Process chains and ran the example queries to give ourselves a baseline of data to test against. After the change we ran the same queries again and compared the results against the baseline. We tried to keep R/3 test environments as static as possible during this, although it wasn't always the case & we often had to explain away small changes in the results. After upgrading BW Development we connected it to Acceptance R/3, so that we had pre-upgrade (BW Acceptance) and post-upgrade (BW Development) both taking data from the same place so we could compare and contrast results on both BW systems. We did the same thing once BW Acceptance had been upgrading by connecting it (carefully!) to Production R/3. To get round the lack of disk space we tested by Application and deleted the data once that Application had been signed off. Once we got to System test we involved super-users to sign off some of the testing.
Security
We chose to implement the new security schema rather than choosing the option to stick with old. For us, with a relatively small number of users we felt we could get away with this & if it all went wrong, just temporarily give users a higher level role than they needed. Our security roles are not complex: we have end user, power-user and InfoProvider roles for each BW application, together with some common default roles for all. In the event we simply modified the default "Reports" role that all our users are assigned, transported it and it all went smoothly. Apart from the fact that everyone's workbooks are assigned to this role and so we "lost" them all !
Transport Freeze
Once you've upgraded Development you've lost your transport path. We planned around this as best we could and when absolutely necessary, developed directly in Acceptance or Production, applying those changes back to Development once the project was complete. Depending on what other BW projects you have running this may or may not cause you pain!
Web Applications
Dashboards
We had various dashboards designed via Web Application Designer. All these continued to function on the upgraded system. However there were various formatting changes that occurred e.g. Bar graphs were changed to line graphs, text formats on axes changed etc. SAP provides an upgrade path for moving your Web applications by running various functions. However we took the view that we would simply re-format our dashboards manually, as we didn't have very many to do. Plus the external IGS (see below) powered all our environments and needs upgrading separately as part of the SAP method. Thus we couldn't have tested the SAP path in Development without risking Production. Sticking with manual mods was a lower risk approach for us. We did find we had to re-activate some templates from BC to get some of the reports to continue to work.
Internet Graphics Server (IGS)
We had an external IGS server with v3.0B. Post-upgrade the IGS becomes part of the internal architecture of BW and thge external server is redundant. We found no issues with this; after the upgrade BW simply stops using the external IGS and no separate config was needed.
Detailed Task Lists
Support Pack Hike (detail)
Apply OSS 780710 & 485741
Communicate outage to users
Warning msg on screen
Stop the jobs which extract data into delta queues
Clear the delta queues by loading into BW
Check RSA7 in PAE that delta queues are now empty
Run Baseline for Regression tests
Stop Delta queues
Lock Out users
Full Backup
Apply SP's
Upgrade the SAP kernel from 620 to 640
SPAU list review
Apply OSS Notes 768007 & 861890
Unlock Test users (inc. RFC id's on R/3)
Regression testing
Regression sign-off
Remove warning msg
Unlock users
User communication
Plug-in installation (detail)
Communicate outage to users
Warning msg on screen
Apply SAP note 684844
Lock out users
Full Backup
Empty CRM queues
Import and patch Basis plugin PI 2004.1
SPAU list review
Apply OSS 853130
Switch back on flag in TBE11 (app. BC-MID)
Remove warning msg
Unlock users
User communication
Dbase upgrades
Dbase upgrades (detail)
Communicate outage to users
Warning msg on screen
Run Baseline for Regression tests
Stop the Data extract jobs
Full Backup
Lock Out users
Apply FixPak13SAP to DB2 database
Upgrade the SAP kernel from 620 to 640
Apply OSS 725746 - prevents RSRV short dump
Unlock Test users (inc. RFC id's on R/3)
Regression testing
Regression sign-off
Remove warning msg
Unlock users
User communication
PREPARE Process (detail)
Pre-PREPARE Process
RSDG_ODSO_ACTIVATE
Repair Info objects and recreate the views
Communicate outage to users
Warning msg on screen
Run Baseline for Regression tests
Stop the Data extract jobs
Lock Out users
Full Backup
Run RSMDCNVEXIT Using BSSUPPORT ID
If there conversion process runs longer delay the regular backup
Re-run Baselines and sign off
If there conversion process Fails repeat the steps on Sunday after the regular backup
BW work
Back up customer-specific entries in EDIFCT (note 865142)
Activate all ODS objects
Execute report RSUPGRCHECK with flag "ODS objects" (note 861890)
Check Inconsistent InfoObjects - Upgr Guide 4.4; OSS 46272; Convert Data Classes of InfoCubes - Upgr Guide 4.3
Execute report SAP_FACTVIEWS_RECREATE (note 563201)
Make sure Delta queues are empty (RSA7)
Basis Work
Full Backup of BW
Lock users
Unlock id's RFC id's and designated test users
Confirm backup complete OK
Apply OSS 447341 Convert Inconsistent Characteristic Values - Upgr Guide 4.5
Confirm OK to PREPARE
Run PREPARE
Review of results
System Upgrade (detail)
Communicate outage to users
Process errors from PREPARE
Check disk space availability for PAB
Warning msg on screen
Reverse Transport Queries from PAB to SAB & DAB
Change BW to R/3 connection
Get backup put on hold, for Ops to release later
Ensure Saturday night backup is cancelled
Final run of PREPARE
Run Baseline for Regression tests
Clear Delta Queues
Delete Local Transports
Remove process chains from schedule
Lock Out users (with some exceptions)
Confirm to Ops and Angie that we're ready
Full Backup
Incremental backup of Unix files
UPGRADE "START"
Back up kernel
Unpack latest 700 kernel to upgrade directory
Check ids required for upgrade are unlocked
Check no outstanding updates
Turn off DB2 archiving
Open up the client for changes
Stop saposcol, & delete from exe directory
Run the Upgrade
Execute the saproot.sh script
Perform the database-specific actions
Perform follow-up activities for the SAP kernel
Reimport additional programs
Import Support Packages
Call transaction SGEN to generate ABAP loads
Transport Management System (TMS)
Handover to BW Team
SPAU list review
Apply OSS Notes from SPAU
Process Function Module XXL_FULL_API (part of SPAU)
Restore table EDIFCT (if required)
Transport Fixes from our BW Issue list
Convert the chart settings - manually
Perform activities in the Authorization Area
Activate hierarchy versions
Update the where-used list
Execute the conversion program for the product master
Transport New roles to PAB
Unlock selected users
Regression testing
Regression sign-off
Go / No Go decision
Restore if required
Remove warning msg
Tell Ops that the CR is now complete
Lock down PAB
Unlock users
User communication
Perform the follow-up activities for SAP Solution Manager
Reschedule background jobs
Reschedule weekly backup on Ctrl-M
Drinks all round.
Vendors mentioned: dBase
Hope this helps.

Having an upgrade timing and eventual platform swapping problem

I currently have CS4 Standard Design Creative Suite installed on my laptop only (PC) which I need to upgrade to CS6 before December 31. However, I will be buying an iMac before next spring on which I need to have the new CS6 upgrade installed (for Mac, obviously).
This is causing me a headache because I don't want to pay for an upgrade just now on my PC in order to keep my upgrading priviledge and having to pay again for a new full version when I get my iMac, especially in view of the fact that the standard license technically allows me to install the software on my laptop and my desktop, provided that I don't use them at the same time.
I searched the web quite a lot, and came upon the post below in a forum. Can you tell me whether this is possible or not, because it would be the ideal solution for me!
"Upgrade to CS6 on your PC and then apply for a platform switch OK from Adobe which can take 2 days or 2 weeks - it all depends and their process changes everytime I try it.
While waiting for the CS6 for the Mac you can continue to use CS6 on the PC. After you make the switch you can continue to use CS5 on the PC as it is a legal license but you need to agree to stop using CS6 on the PC (and sign a statement to that effect) when you make the switch to the Mac."
Or, can I simply by the upgrade now, with the swap for Mac option, but wait until I get my new Mac to install it, all the while leaving my old CS4 working on my laptop?
Thank you for any help you can provide!

Well, if this is so, it sucks big time!
It would mean that a user does not have his choice of computers on which to install the software he pays lots of $$$ for, and if he is using two different platforms, he gets less for his money than the customer who has both computers on the same platform. I am being penalized because I don't have the budget to change my laptop to a MacBook at the same time as I buy a new iMac AND upgrade my creative suite!
Money making scam, if I may say so, because Ligtroom will work on both platforms as most of Adobe's unexpensive software, why not CS6? The reason is simple in my mind: CS6 is 10 times the price of Lightrom so there are big bucks to make from forcing users to buy a full license for each platform...
Sorry, I had to vent a little bit here...

ABAP Queries not available after upgarde from 4.6C to ECC 6.0

Hi All,
We have upgraded from 4.6C to ECC 6.0 version. There is some problem with the ABAP queries. The ABAP queries created in 4.6C were assigned to a Ztcode and now after the upgrade when we execute the Ztcode we are getting the error
that the program does not exist.
I tried to regenerate the code ( a new program name is generated) but there are differences in the selection screen (like the output format etc) between the two versions.
I looked into the relevant SAP notes also but could not find any solution.
Could any of you suggest any ideas to generate abap queries after upgrade?

hi,
Re: SAP version differences 4.5b, 4.6c and ECC6.0
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Hope this helps.
venkat.

I bought Aperature and PS from a university store, not under my apple username, now it won't let me update it to work with Yosemite because it isn't hooked to my username. how do i fix it and get the upgrade

A few years ago or so i bought Aperture and Photoshop (the whole kit and caboodle) from a university subsidized store (my husband worked there and buying programs like those two, the whole Microsoft office Suite, all kinds of things) at a very significant discount, i think we paid 25$ for Photoshop vs the 400$ it was selling for on the open market.
Yesterday i upgraded most of my laptops to Yosemite (one of them I'm sure was the one that had Aperture on it, a 17in MacBookPro, its about 2 years old now, but at the time i bought it it was the highest computer apple had on the regular floor, I'm sure i could have added some stuff to customize it for extra, but basically we are talking top of the line computer. I recently just required a 2012 MackBook Air with also fairly heavy specs from a family member that was upgrading (I'm not sure why, i know they couldn't possibly be using this thing for anything beyond its capacity, its basically new, and they aren't 3D animation rendering and needed a "quicker" one).
I was very happy with the upgrade, and now it does work much more seamlessly with my iPads and my iPhone, but the whole reason i uploaded it was to work on pictures, adjust them, change the size and then print them out to include in jewelry, and Yosemite won't let me use Aperture at all, when i click to upgrade it (in the bar all it has basically old icon with a (no sign or ghost busters like sign over it) i click on it and it says, you did not buy this with your apple account name and i could not upgrade it. But it just made me click ok, and did not give me any info on how to upgrade it. i do physically own it, or my husband does, I'm not sure to whom it is registered, but sholdnt i still make it able to work with this new operating system, even if not through regular "software updates" it used to always be asking me to upgrade "word" and i got that in the same way, so what is the issue and what do i do to get it to work on this new system?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

"show my windows and tabs from last time" does not work after upgrade to 8.01

After I upgraded to the latest v8.01 I have lost all my tabbed sites and even when trying to add them and save them with the Tools>Options>General>Start up>when Firefox starts selected feature "show my windows and tabs from last time" it does not hold the saved sites and when browser is restarted it always loses all the tabs and only shows one tab with Firefox home webpage. I need to have several sites open to work and the only way to do that now is to make sure I click the "Use current pages" under General Option in Tools. It is getting very annoying because I keep changing my tabs to different websites during a session and I am used to just closing the browser, relying on having them all back in when restarting Firefox.

Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History
*https://support.mozilla.com/kb/Firefox+does+not+ask+to+save+tabs+and+windows+on+exit
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!!

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each like in version 10.6

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each, like in version 10.6. It used to show the size at the bottom of the "window" for the selected folder,drive etc.

Upgrade CFM and CML from 4.7 to ECC 6.0 Version

Similar Messages

Maybe you are looking for