Upgrade email received no sign of ADSL2+
Like many others, I received an email approximately 2 weeks ago stating that my line on the Kesgrave exchange had been upgraded. Since then there has been no sign of my line switching over to ADSL2+. Below are the current stats from my home hub. The hub is connected directly into a filtered socket on the master socket. I have tried plugging directly into the test socket (removing any internal wiring issues). COuld you explain why the line has not moved over to ADSL2+? I have a BT Test line coming into the house over another pair the same cable that supports ADSL2+ at 11.5 Mbits/s with no problem.
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 2:37:26
Downstream
7,616 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
9.2 dB / 27.0 dB
Line attenuation (Down/Up)
33.0 dB / 15.5 dB
Output power (Down/Up)
19.8 dBm / 12.0 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
1472 / 0
CRC Errors (Down/Up)
8 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
3
yup, we'll wait and see.. have there been many others on kesgrave with same problems on here imjolly? (asking you because with 5952 posts i thought it was a good bet you'd know )
If i've given you a helpful answer please rate me by clicking the rating star to the left
BT Total Broadband Option 4 - London - Pimlico Exchange
Similar Messages
-
hi everyone, I forgat my icloud password, apple says: (Email has been sent. When you receive your sign in information, follow the directions in the email to reset your password. Email has been sent.), but I do not recive Email yet.
Check your junk mail folder just in case.
-
Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. Two days later it is still saying Mar 30. The notification should read the date and time you updated email receiving. Does anyone else have this problem? Is there a solution to this?
We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Hello,
I'm facing an issue which may be related to my location.
I'm located in Switzerland, but I'm a french speaker.
It seems that there is a setting in iCloud which makes me receiving emails in German.
Switzerland has three different languages (officially even 4), and maybe Apple has just made German as a default language for the country.
So, the welcome email from iCloud, and emails received when I use "Find my iPhone" are in German.
On the iCloud website, everything is in French, except my Calendar names which are also displayed in German.
Are they other Swiss people facing the same issue?
If yes, could Apple escalate that issue to development people to fix this?
I've called the support, but unfortunately, they told me to reset my iOS device and to set up the language again on the device, which of course has no effect.
Thank you in advance,
JCI saw that your question hasn't been answered yet -- here's a solution (in case you haven't found one already)
Go to:
Apple - My Apple ID
https://appleid.apple.com/
Sign in with your Apple ID and on the left hand column the last item is "Language and Contact Preferences"
You'll be able to change your "Preferred Language" there. As soon as you begin typing the choices will apear.
I hope this helps. -
if email receiver does not use thurderbird(with enigmail), can my email be traced back or spied by third party? is it meaningless if just me as a sender use thurderbird with enigmail enabled?
Looks like the link you originally clicked was a scam to get you to submit your username and password. I reckon the email from Google was legit (because it did not ask you to enter your username and password, but advised you to change your password.) So it looks like they did actually block a sign-in attempt. Sometimes, scammers do send out emails like this, but they are the ones which ask you to sign in again (because it's those details they are after).
Given that you've changed your password three times you should be safe. The golden rule is never submit usernames and passwords when prompted from an email - it's almost certainly a phishing attempt designed to get hold of your details. -
Could you tell me please why I could not do the upgrade from Adobe Lightroom 5 to Lightroom 6 ( standard version not CC ) !? I make the payment, I have the confirmation of payment, i have the license key, but when I want to download my upgrade, i receive the message "413 Header Length too large". Thank you. Catalin Mihaescu from [email protected]
Are you using Chrome? I noticed these errors on Adobe's website redesign using Chrome. Try a different browser.
-
Hello, I'm upgrading a client from LC 7.2.2 to 9.5. My best days of LC 7 are long past me. The upgrade didn't go as planned and I basically just recreated their workflow manually (since they only had one). I have everything working except there is one part I can't see in their old workflow. They have 7 assignments steps and the first 5 all interact via email only and never log into the GUI. I am unable to figure out how the Email Receiver is working as I can't even see any references to it. In Designer, I can see two component sections (Core, Tools). I have no idea how the email is being received as the workflow itself appears to only have Assignment steps. Do I need to manually install the EmailReceiver QPAC in Desinger just to see those steps? I can't see any references to subprocesses. Please help.
Got it figured out.
http://blogs.adobe.com/ADEP/2010/08/configuring-email-for-process-management-in-livecycle- es2.html -
Verizon upgrade email fiasco, anyone else get this ?
I received an email on October 15th from the address [email protected] telling me I am eligible for a new phone. I have received email from this address before and it even had a picture of my current phone and the last 4 digits of my phone number in the email. It says in fine print in the email "Available only if customer has not upgraded in last 180 days". I last upgraded over a year ago. I then log into my Verizon and of course it says that I am not eligible for upgrade until Feb 2012. So I call customer service to ask about the email. I am told to forward the email to the representative. After being on hold for 10 minutes she comes back and says that the email is from a 3rd party. I would like to note that when I click the links in the email it takes me right to their official website. I tell her this makes no sense and that I would like to speak with a supervisor.
After another 25 minutes on hold she comes back and says she spoke with a supervisor( I never end up talking with a supervisor after asking to speak with one personally) and says that they have been having problems with this "fraudulent email" since this past Friday October 14th. I do a quick internet search to see if anyone else has gotten "fraudulent" 3rd party email from said address and find nothing. She then says they will honor the upgrade.. But there's a catch. In the upgrade email there are four pictures of phones that are "top recommendations" from Verizon. They will only honor the upgrade if I purchase one of these four phones. Oh and I also have to purchase the phone through the representative right at that moment over the phone. I laugh and say you can't be serious as I have no interest in buying one of their crappy suggested phones. What is the point of "honoring" the upgrade if I can only choose from four phones that I have no interest in? I tell her to make note of this conversation for future reference and take down her name, shift hours and tell her I will be getting back to her later in the week. I really don't know what to do at this point. I don't even care if I get the upgrade or not, I just felt like I was lied to about the whole situation.An update. When I called they flat out wouldn't let me upgrade, claiming the email "came from a third party". I have since received an email from Verizon basically saying that the original email I recieved was in error, and that there are no updates available at this time. The thing that **bleep** me off is that the rep flat out lied to me about being from a "third party". I compared the email headers of both the original and followup emails and they came FROM THE SAME PLACE. Same originating address, using the same email processing system/server. This is why Verizon has a problem - they will just say whatever it takes to get you off the phone.. unless of course you're ready to spend big bucks on a new phone... Either that, or they will say nothing when you ask about a problem (ie. Incredible update status), or pass the buck to the manufacturer.
-
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
Message monitoring Status Waiting for email receiver
Hi Guru,
Scenario: SAP ECC will call Error Handling interface class. The communication channel for the Error Handling interface is Email Adapter.
Below is CC setting:
Adapter Type: Mail (Receiver)
Transport Protocol: SMTP
Message Protocol: XIALL
Adapter Engine: Integration Server
URL: smtp://11.11.11.111/
Check - Configure User Authentication
User : user1
Password: password
Mail Attributes:
From: [email protected]
To : [email protected]
Subject : test
Content Encoding: base64
I encountered one problem where my email receiver status in message monitoring is always 'Waiting'. I do not know what went wrong in the setting? Does anyone know how to solve my problem ?
Thanks in advance.
RegardsXI tries 3 times before changing the status of the message to System Error. One can Manually resend the error messages by using the RESEND button in RWB. In scenarios where XI was trying to send the message to an end system that was down for maintenance, you would want XI to resubmit the message automatically without human intervention. What would be nice is to able to tune the retries like IS_Retry which is available for Integration engine.
We can achieve this by changing the retry count used by the Adapter Engine, by default its set to 3 times, 5 minutes apart. This count can be changed in Visual Admin->server->services-> SAP XI Adapter: XI.
Here change the number Retries parameter from 3 to 10 and change the retry retryInterval to around 10minutes. For these configuration changes to be picked up, restart SAP XI Adapter: XI.
please visit the blog
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically -
Hello everybody,
I have the next error in the configuration of an Email receiver communication channel:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused: connect
this error is displayed in the RuntimeWorkbench, now everything seems OK in the configuration, any suggestions of what could be happening?, I mean I'm lost on what to look for in this kind of error, cause I've configured another channel like this before and worked really well, I'm sure on the SMTP server name in the configuration, any suggestions would be really appreciated, thanks in advance.
Regards,
Julio CesarThanks for your anser, actually I have configured that server in my Outlook, so that's how I confirmed is up, I've tried gmail, hotmail and company emails, so I don't now if there's something in the network or with the adapter, now I have no idea what to check if there's something with the network, any sugeestions?, thanks again.
Regards,
Julio Cesar -
Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Email Receiver: how to get the names of stored attachments?
Hi,
I hate to spam this forum. But I'm in desperate need of the names of attachments, the email receiver QPAC receives.
If I select a list variable for the email receiver to store all attachments received into, all filenames appear to be lost. Also the MIME-types appear to be lost. Which is not big a problem, since I may use javax.activation in order to identify the MIME-type of any fileinputstream. But sometimes, I am unable to correctly identify the MIME-type. Then I need to fall back on the file's original name.
So the simple question is: how do I get the 'filename' attribute of org.idp.Document objects instantiated by email receiver QPAC?
Did anyone ever do that?
Regards,
SteveHi Diana,
1) I used the XPath expression indicated in the screenshot below. It resulted in the process variable
filename being
NULL.
2) I using the following Java-Code in a scripting QPAC:
import java.util.ArrayList;
import java.util.Iterator;
import java.util.Set;
ArrayList list = patExecContext.getProcessDataListValue("/process_data/attachments");
System.out.println("[TEST] num attachments: "+ list.size());
for (Iterator it = list.iterator(); it.hasNext(); ){
com.adobe.idp.Document doc = (com.adobe.idp.Document)it.next();
System.out.println("[TEST] attachment #1, filename: '"+ doc.getFile().getName() +"'");
System.out.println("[TEST] attachment #1, filename-attribute: '"+ doc.getAttribute("wsfilename") +"'");
System.out.println("[TEST] attachment #1, file size: '"+ doc.length() +"'");
System.out.println("[TEST] attachment #1, content-type: "+ doc.getContentType());
Set attributeList = doc.listAttributes();
System.out.println("[TEST] num attributes: "+ attributeList.size());
for (Iterator attributeIter = attributeList.iterator(); attributeIter.hasNext();){
String attribute = (String)attributeIter.next();
System.out.println("[TEST] attribute found: "+ attribute);
Its output in the logfile was the following:
[STDOUT] [TEST] num attachments: 1
[STDOUT] [TEST] attachment #1, filename: '646834941068179579'
[STDOUT] [TEST] attachment #1, filename-attribute: 'null'
[STDOUT] [TEST] attachment #1, file size: '14624'
[STDOUT] [TEST] attachment #1, content-type: null
[STDOUT] [TEST] num attributes: 0
Is there something I did wrong?
Or is it even possible that the Email Receiver does not care about attributes of attachments?
Regards,
Steve -
Email received on BT email display blank content
Hi,
The email received fron certain domain on BT internet mail display blank content. Has anyone come across the problem? Let me know how to solve.I am getting the same thing - going to post about it shortly as I don't know the solution either.
-
After my mail was moved to iCloud, my mail app emails received have 23 lines of "routing data between the address and the message how can Imget rid of this "data"?
Found the answer a Mail>preferances>Viewing>Show header detail. Changed it to Default.
Maybe you are looking for
-
Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c
-
Accuracy of Lens Correction in LR3 or 4
Hi! I recently bought my Fuji X10 und downloaded LR4 (beta). Im quite new to LR & RAW, but learning fast. Since there is no LCP for the X10 available yet, I'm doing lens correction manually. But the manual correction is quite limited, especially for
-
Best way (folio/bounding) to display a printed portfolio? (Graphic Design question)
Hi all, Apologies if this isnt posted in the correct forum (but I wasnt able to find any mainstream graphic design forums, I know there is ultrashock but that's more flash based, if anyone could point me to some would be great.) Any how my question i
-
System.Web.Services.protocol.SoapHeaderException
I created a web service using java, with NetBeans 5.0. I used sun application server. Then I create Microsoft C# web service client in order to connect to the java web service. When I connect it I got following Exception called , System.Web.Services.
-
Window.open SSRS & Sharepoint problem
I want to open a new window when I click a hyperlink on my text box. Now I have seen the following javascript on a lot of posts: ="javascript:void(window.open('http://www.google.com/','_blank'))" it works fine in SSRS 2005 ( report server and repo