Upgrade from 2005 to 2008 R2 did not work

I upgraded from 2005 to 2008 R2 32-bit this weekend. The upgrade gave me and error about not finding sqladmin so canceled and finished upgrade. Database is still running on sql 2005. In the detail log it shows this. How do I get it to upgrade? Do I
just run the install disk again?
Thanks.
Kevin
Sql Server 2008 R2 MSSQLSERVER.INACTIVE MSSQL10_50.MSSQLSERVER Database Engine Services 1033
10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER.INACTIVE MSSQL10_50.MSSQLSERVER SQL Server Replication 1033
10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER.INACTIVE MSSQL10_50.MSSQLSERVER Full-Text Search

Hello,
Please try the workaround posted on the following post:
http://blogs.msdn.com/b/baliles/archive/2012/04/27/how-to-fix-a-failed-sql-2005-2008-r2-or-2012-install-upgrade-mssqlserver-inactive.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

Reports can't be upgraded from 2005 to 2008

I have converted all my rdl reports from 2005 to 2008 through BIDS conversion wizard.I have also converted the XSD file from 2005 to 2008.
When I try to load the report locally(through dotnet code), I am getting below run time error.
The report definition is not valid. Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition' which cannot be upgraded.
Could you please help me to resolve this issue?.

Hi Dikshan,
As per my understanding, we can directly use Business Intelligence Development Studio (BIDS) Conversion Wizard to upgrade reports from 2005 to 2008. While in the upgrade process, we may run into the failed upgrade process, then we may receive the error message.
Based on my research, the reason why this issue occurred is that there are some assembly still refer to 8.0.0.0 version, other than 9.0.0.0 version. So we should manual change the 8.0.0.0 version string with 9.0.0.0. For more details, please refer to the
following blog post by Brian Hartman:
http://blogs.msdn.com/b/brianhartman/archive/2010/06/07/upgrading-web-application-projects-to-vs-2010.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.

I tried to inport a bookmark html which was exported from Google Chrome. but it did not work

I exported the file from Google Chrome and tried to import it into Firefox as advised using FireFox help
It Did not work
Help!
vcoli26

Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

After i install firefox 6 what will gonna happen to my orbit downloder V4.1.0.2 ?am i still able to download through orbit?last time when i upgrade to firefox 5 my orbit did not worked. thanks

last time i had older version of orbit downloder, so when i uupgrade my firefox to firefox 5.the orbit downloder grab ++ did not work.
i mean before i was able to download video when i browse with firefox 4. after upgrading it i could not do it.
now i have the ORBIT DOWNLODER latest version V 4.1.0.2
my question is if i upgrade to Firefox 6, this orbit downloder grab ++ will it work or will it crash?
so i'm afraid of upgrade to firefox 6.
thanks

thx ,lot! appreciate!i think the same as you. FF should stay on same platform for a while until others approaching to the same platform ,
FF should understand this issue seriously.

Upgrade from CS4 to CS5.5. did not go smoothly, now stuck at CS5 - how do I fix the installation?

Hi There,
I had a lot of issues upgrading from CS4 (Adobe Application Manager crashing, installer not opnening etc) but managed to get the installer to run by using the Adobe Creative Suite Cleaner Tool to remove all traces of CS4.
However, when the installer finished, it stated there were errors and now the installers won't run - nor can I run updates from the CS apps that did install.
I've normally never had any issues upgrading, so am not sure why I had so many issues and the best way forward from here - Hoping I don't have to remove all the CS5 apps, use the Adobe Creative Suite Cleaner Tool again and start from the begining.
I'm trying to install Master Collection CS5.5 on Mac OS 10.7.2
Any suggestions would be much appreciated.
Cheers
Ben

Have had to hang up as I was calling the US using a New Zealand Mobile while in Portugal (long story) - and the 11 minute wait time would've cost the same amount as the CS5.5 upgrade!
I had to call the US because:
The New Zealand support number listed on the Adobe site doesn't work
New Zealand is not listed as a country Adobe suppoprt will call back from the "Schedule a callback" page
What a joke.
I used the Adobe Support Adviser app to analyze the install error log and it provided me with a very helpful link to a support page that states "You can ignore this error and launch the products you were installing."
Unfortunately, nothing was installed.
I need to do work while a long way from home and can't use/install any CS5 apps - does anyone know how to install CS5 in Lion?
Cheers

Upgrade from 2005 and 2008 R2 to 2012 SP2

My project is getting ready to upgrade from SQL Server versions 2005 and 2008 R2 to SQL Server 2012.
Is there any known issues that we should look out for?
For SQL Server 2005, we are only running the Database Engine, Full text search and SQL Server Agent.
For SQL Server 2008 R2 we are running Database Engine, Full Text Search, SQL Server Agent, Analysis Services, Reporting Services, and Integration Services.
DJ

Hello,
A new full-text search service was introduced on SQL Server 2008, so about upgrading full-text search from SQL Server 2005 to SQL Server
2012, please read the following article:
http://msdn.microsoft.com/en-us/library/ms142490(v=sql.110).aspx
On the post-installation tasks, please repopulate the full-text catalogs.
To what edition of SQL Server 2012 you are upgrading? Do you know about the core-based Enterprise licensing
Have you run Upgrade Advisor? Please read the following technical article too:
http://download.microsoft.com/download/9/5/3/9533501A-6F3E-4D03-A6A3-359AF6A79877/SQL_Server_2012_Upgrade_Technical_Reference_Guide_White_Paper.pdf
About Analysis Services, please read the following:
http://technet.microsoft.com/en-us/library/ms143742(v=sql.110).aspx
http://technet.microsoft.com/en-us/library/ms143229(v=sql.110).aspx
http://technet.microsoft.com/en-us/library/ms143682(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Upgraded from PE9 to PE12: ratings did not transfer on organizer

Upgraded from PE9 to PE12 and the ratings and tags did not transfer to the organizer - or maybe they are there, but I do not know how find.
I also upgraded from Vista to Microsoft 7. Do I need to uninstall the Vista version and reinstall, or is there a different solution?

Topteke a écrit:
Upgraded from PE9 to PE12 and the ratings and tags did not transfer to the organizer -
When you installed PSE12 and opened the organizer, you should have been asked to convert your catalog. That would have created a new catalog with the contents of your old catalog; that old catalog being still available to PSE9. If, instead of letting the conversion automatically take place, you have simply imported your pictures into the new empty PSE12, the tags and captions are not recovered (unless you specifically 'wrote metadata to files' in the PSE9 organizer).
Now, use the menu file/catalog (Ctrl Maj C) and click on the 'convert' button. Check the option to show already converted catalogs. You should see your PSE9 catalog and start the conversion.

Upgrade from Elements 10 to 12 - Organiser Not Working

I have upgraded a fairly large catalog (20,000+ photos) from Elements 10 to Elements 12. The upgrade completes successfully but the catalog will not open in Elements 12.
Either organiser crashess immediately, or if I go into Organiser with a new catalog and then open the upgraded catalog from Manage Catalogs then the thumbnails are loaded and I get a "Please wait while the catalog is loaded..." dialog. This would be fine if the catalog actually loaded, but many hours later it is still in the same mode with organiser unresponsive.
Using task manager I can see that Elements 12 Organiser (32 bit) is consuming memory but nothing with respect to CPU, Disk or Network. Checking the logs (the ones I can find) they are not updating during that period leaving me to conclude that Organiser is dead.
The install itself appears OK as I can start a new catalog with problems. Trying to repair the catalog indicates that the catalog has no errors.
I am running Windows 8 Pro.
Anyone else seeing similar issues / ideas on what I can do to recover the catalog?
Thanks

Ok after much pain, research and frustration I have figured out what the issue was. There were some some records in my catalog table media_table with a volume_id without a corresponding record in the volume_table table. I found this by looking at forums for common issues with previous catalogs. Correcting the volume_id record in media_table solved the issues.
If your elements organiser is crashing its worth checking if you have a similar situation although will require some technical knowledge. I would recommend that you ALWAYS backup your catalog before doing any corrections in the database in case you corrupt everything and only proceed if you are comfortable with what you are doing and the risks involved:
Download sqlite and ensure sqlite3.exe is in the same directory as your catalog file
Backup your catalog.pse12db file
From the command prompt cd into the directory where your catalog is located and run sqlite3.exe catalog.pse12db
select distinct(volume_id) from media_table where volume_id not in (select distinct(id) from volume_table);
If point 4 returns nothing your issue is different. .quit will close the database connection.
If point 4 does return records then you have an issue. My records should have been linked to a different record in volume_table so I ran an update statement to manually correct the volume_id in media_table.
I went back to my pse 10 backup catalog to see if this issue was caused during the conversion and it was not, the same problem existing in the old catalog. How this occured I do not know but there must have been a bug introduced in pse12 as pse10 had the same issue and did not crash!
Hope this helps anyone else who is struggling with pse12 crashing!

Upgrade from 4.0 to 4.1 not working

I upgraded from apex 4.0 to 4.1 using the steps below. Everything seemed to go fine but when I try to go to http://aus-perfdb.us.oracle.com:8081/apex/ , it connects but I don't see anything. Do I need to copy the images somewhere?
Thanks
downloaded apex 4.1 into aus-perdb:/oracle/APEX4.1
cd /oracle/APEX4.1
unzip apex_4.1_en.zip
cd apex
lsnrctl stop
sqlplus sys/orcl as sysdba
@apexins SYSAUX SYSAUX TEMP /i/
Saw the following at the end of the install
PL/SQL procedure successfully completed.
-- Now beginning upgrade. This will take several minutes.-------
-- Ensuring template names are unique -------
-- Migrating metadata to new schema -------
-- Switching builder to new schema -------
-- Migrating SQL Workshop metadata -------
-- Upgrading new schema. -------
-- Copying preferences to new schema. -------
-- Upgrading Websheet objects. -------
Upgrade completed successfully no errors encountered.
-- Upgrade is complete -----------------------------------------
timing for: Upgrade
Elapsed: 00:02:03.15
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040100 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000
Performing Application Express component validation - please wait...
timing for: Validate Installation
Elapsed: 00:01:44.66
timing for: Development Installation
Elapsed: 00:12:49.73
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
lsnrctl start

Hi,
Not sure if this is a bug or just an unlucky constellation...
I had the same (or similare) issue with a new installation of 4.1 (after removing 4.0)
Before you run these two scripts again
apex_epg_config.sql (it will call apex_epg_config_core.sql)
apxldimg.sql
open these two files and put the prefix of "APEX_040100." to all calls to wwv_flow_utilities
apex_epg_config_core.sql
apxldimg.sql
So that all these calls looks like APEX_040100.wwv_flow_utilities ....
Run the scripts as SYS again.
Also check if your public apex user is not locked and has a valid password.
Also check whether your XDB user is not locked (I had this problem, however no idea what could have caused it)
Andre

IPhone 4 upgraded from iPhone 3GS but Apps did not synch after restore...

I have had every iPhone since the very first one - call me crazy... and each time a new one has come out, all I have needed to do is take it home, restore from last back up and voila - all good. This time, no so good - I took the new iPhone 4 home, plugged it in, restored from backup, then selected to synch my iPhone. Now, admittedly, I have 21.4 GB of music, about 4800 songs (which is why I bought the 32Gb phone, again) and it takes quite a while to restore and synch the phone. When the initial synch was complete, iTunes had only copied my music, movies, pics, etc, everything EXCEPT my APPS! So I spent about an hour organizing all my apps into folders and moving them around, then I synched it and all was good 4 days ago. Last night I went to synch my phone and received several errors stating that the phone could not synch and that some files were missing, so I restored from backup, again, and resynched, again, and this time, like last, all my apps were not installed, but only some of the folders were... Am I doing something wrong or is there a trick to get this to work... or maybe some of the apps I have need to be trashed?
Thanks in Advance,

jpcaldo wrote:
I have had every iPhone since the very first one - call me crazy... and each time a new one has come out, all I have needed to do is take it home, restore from last back up and voila - all good. This time, no so good - I took the new iPhone 4 home, plugged it in, restored from backup, then selected to synch my iPhone. Now, admittedly, I have 21.4 GB of music, about 4800 songs (which is why I bought the 32Gb phone, again) and it takes quite a while to restore and synch the phone. When the initial synch was complete, iTunes had only copied my music, movies, pics, etc, everything EXCEPT my APPS! So I spent about an hour organizing all my apps into folders and moving them around, then I synched it and all was good 4 days ago. Last night I went to synch my phone and received several errors stating that the phone could not synch and that some files were missing, so I restored from backup, again, and resynched, again, and this time, like last, all my apps were not installed, but only some of the folders were... Am I doing something wrong or is there a trick to get this to work... or maybe some of the apps I have need to be trashed?
Thanks in Advance,
I need to ask, just in case, but are you certain you have enough room for the apps? It seems like you do, but you might have synced some videos or movies that prevent the apps from syncing.
You might have some corrupted Apps too. Don't synch any apps you don't need, and then try again. You're going to have to take some time to sort through it all.

N100 SODIMM upgrade from 1GB to 2GB ... not working as expected, help please

I have recently bought some RAM modules for my N100 3000 series laptop which was originally bought around 1.5 years ago. The original modules that came with the laptop were 512MB x2. I am upgrading to 1GB x2 modules.
I ordered them from Ebuyer.com and they were Kingston modules, who declare on their website and on the packaging that the modules are compatible with the laptop. After installation and attempting various configurations, the overall outcome is that slot A accepts new RAM (both modules work in this slot), slot B doesn't accept new RAM (but does accept the original RAM), and all RAM modules work without errors.
Would you know what either I am doing wrong when installing the new RAM, or if there is a configuration setup I need to do to be able to install the new RAM in the BIOS?
Thank you in advance for any advice given.

Now you're talking about the internal bits that make Excel
behave the way it does. There is an entire section in MSDN (
http://msdn.microsoft.com)
devoted to Office XML, which is what you'd have to use to serve up
a fully-functioning XLS file.
You can find an example on this site. The Google Groups
address is
http://groups.google.com/group/macromedia.coldfusion.advanced_techniques/browse_thread/thr ead/71abd01da20e186a/f192971168deae79?lnk=st&q=CFCONTENT+Excel+cell+format&rnum=2&hl=en#f1 92971168deae79
Have fun!

I tried to print file from my ipad, but it did not work and i wonder why?

Hello, I just purchased Photosmart Prem C310, set it up and have no problem to printed from my IPad, but today I tried to print some files and nothings work, no error messages either. Can you please help? Thanks, Siuway

Hi Siuway,
I'm sorry you're having this issue but I have some steps that might help.
1. Unplug your network's router, then the printer, and turn off the iPad (in that order).
2. After about 60 seconds, plug in your router and when everything is ready (steady lights on the front), plug in the printer and turn on the iPad.
3. Try printing the same documents again.
Please let me know if this works or not. If it doesn't, I have some more steps we can try.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

TS1388 Upgrade macbook air late 2008 to mavericks not working

I have a late 2008 macbook air and im trying to install mavericks, when i press download and install on app store it says it cannot be installed on that macbook air. but according to the specs on the apple webpage its compatible with mavericks. im currently running snow leopard. I tried to make a bootable disk using disc utilities, everything is done correctly and i start up my macbook air holding option key and choose my bootable USB as startup disc, but i just get a circle with a line through almost like a prohibited sign. What must i do?

Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Air (Late 2008 or newer) model number 2,1 or higher

Upgrade from 2005 to 2008 R2 did not work

Similar Messages

Maybe you are looking for