Upgrade Harddrive in Power Mac G5 mod. 7.3.

Hi!
Wish to upgrade my PM G5 modell 7.3. (June 2004). I have a 2 GHz dual core. Most 3,5" SATA HD today are SATA-300 and SATA-600 could either of these SATA HD be used in my G5, or is there some other spesification on the SATA that I need to know before I purchase it? I am looking for two 1 TB HD to upgrade.

Hi-
Western Digital Black (and Blue) drives, the Hitachi 7K drives work very well in a G5.
Seagate drives are problematic in the G5. A one-time "gold standard" for Macs, Seagate SATA 3 drives should be avoided for use in a G5.
Western Digital SATA 2 Black and Blue drives are plug and play out of the box.
Western Digital SATA 3 Black and Blue drives are plug and play with use of a jumper on pins 5 and 6 of the drive to limit to SATA 2.
Hitachi 7K SATA 2 and SATA 3 drives are plug and play out of the box.
Recent user experience may interest you:
https://discussions.apple.com/thread/3847618?start=15&tstart=0

Similar Messages

  • HT201364 Can I upgrade my 2010 Power Mac G 5 that has OS 10.5.8, going through Snow Leopard and then to OS X Mavericks?

    Can I upgrade my current Power Mac G 5 that has OS 10.5.8 from 2010 to the current OS X Mavericks if I first install OS Snow Leopard? My computer has 1.8 Ghz, 3 GB DDR SDRAM, 2 CPU with 512 KB L2 Cache (per CPU) and 500 GB Hard Drive, about half full.

    No. A G5 can't be upgraded past 10.5.8.
    (104197)

  • What is the max  os upgrade available for power mac g5 w/powerpc processor

    What is the max one can upgrade the os on a powerpc power mac g5

    Hi, 10.5.8...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)

  • What is the Best & Max Upgrade for Used Power Mac G5

    Hi All,
    I need your help on purchasing an old Second hand Power Mac G5, which will coast me nearly 1900$ with 20" Cinema Display? is this price is OK for the below Spec.:
    Processor: 2.0Ghz Dual Core (1MB Cache for single core)
    RAM: 512 MB, DDR SDRAM PCI 533.
    Graphic Card: Nvidia 6600 128
    Hard Disk: 160GB
    And Super Drive for the DVD Rom.
    As you see its have an old Graphic Card and Small amount of RAM so what is the best amount I can Add on RAM and Best Graphic Card to get the perfect performance?
    And What is the max size of the hard drive supported by the machine is it 2TB or less?
    And last not least can I install the new OSX (Leopard) on the machine and is there any difference between MAC Pro G5 and Power Mac G5?
    Looking forward for the answers and hopefully as soon as possible because I afraid somebody else will gonna by it, Thanks for the support and Good Bye.
    Thanks & Regards,
    UAEonline

    Hi! It all depends on your use. If the machine is to be used for serious work such as video editing and Photoshop use then the more power you have usually means more productivity. On the other hand if you are just surfing the net and using word applications like Microsoft Office then nearly any machine is suitable. The early G5's could use 8 gigs of ram and the newer ones 16. Look HERE for late model specs and look HERE for slightly older models. For most people the fastest iMac is a hard machine to beat but there are tradeoffs with an all in one machine. If one component fails it's hard to repair but with a tower design such as a G5 or MacPro the components are easily more replaced. Also expandability with a tower is easier. You can multiple hard drives to a tower that you can't with an all-in-one machine. The new Macpros start at 2799 as per APPLE's SITE while the fastest iMac is 2199 as per APPLE's Site. I'm not a video card expert nor a raid expert so I'll leave those questions to others. Tom

  • I am upgrading a old power mac g4 need update 9.1 and the system gives error message when i try to export it?

    i am upgrading from 9.0.4 to 9.1.0 in the order that I am instructed when trying to get free update from the apple site i get error message..what gives with that am i supposed to just stay in os9?

    9.1 is helpful for some application compatibility, but more so for running Mac OS 9 within Classic environment in Mac OS X.    Classic though is not as good as booting into 9 directly, as many drivers are not accessible to the Classic environment in X.   You can find the newer 9 updates if you follow this tip.

  • Upgrading 1.8 MHz Power Mac G5 (memory and OS)

    I recently purchased an iMac loaded with Leopard. I would like to use the install disk to upgrade my older Power Mac G5. My machine is running 10.3.9 currently.
    I know I need to increase memory, but by how much? A salesman sold me additional memory some time ago, but it caused a lot of problems and I removed it. Now I'm leery of what to buy. Will the following memory description be appropriate, both in type and quantity to run Leopard?
    1GB PC3200 DDR 400MHz Module For PowerMac G5 Models(requires pairs!), iMac G5, Mac mini 1.25GHz/1.42GHz Models. TRUE PC3200 CAS 3.0(or Faster) Non-Stacked 64x8 device Low-Noise PCB Solution! New, Lifetime Advance Replacement Warranty. (OWC3200DDR1024)
    My Power Mac's memory currently consists of 2-128MB DDR SDRAM PC3200U-30330.
    I'm application-oriented and not too technically savvy.

    The G5s came stock with 256MB 6 yrs ago but even then it was sub-standard amount and 1.2 - 1.5GB RAM was much better for even basic light use.
    2GB should be a good improvement, you have 4 DIMM slots likely. But it depends on what you plan to do or use it for. Buy from vendors that sell and cater to Mac hardware.
    OEM DVDs like from an iMac can't be used, they don't load sometimes, and you really do need retail discs. Good luck finding 10.5.x DVD retail.
    New drives can also do a lot to improve performance.
    Realize though, other than running older PowerPC applications, the iMac should be able to do most things very well.

  • IMac or Power Mac G5?  Moving from PC to Mac

    I'm a PC user now and am fed up with Windows. I just recently went to a Mac store and am now a changed man. Here's my delemma. I am an amature photographer and love to use Photoshop Elements. I also do a lot of multitasking for my day job and need power. I will be needing to run a proprietary PC program on the Mac since it is what I use every day. I'm hoping it will work. But once I make the decision to move to the Mac, I'm not sure whether I should go with the iMac or the Power Mac G5. If I max out the iMac with the 2 gb of memory, upgrade the HD to max and the graphics card, it's still cheaper than if I start doing upgrades on the Power Mac. I don't need ridiculous power, but I want to make sure that if I max out the options on the iMac that it will handle heavy duty work. I'm leaning more towards the iMac because of it's compact footprint. I would love, however, one day to have a high definition monitor to do my photos on.
    Love to hear some feedback.
    Thanks.
    Mark

    Well, I considered the iMac G5 but was told that the new Intel ones are faster. I'm also concerned that the one PC program I'd like to run on it may be more compatible if I use the iMac Intel. I was also told that Photoshop Elements will be coming out with a version for this Intel chip. If they do, wouldn't the iMac Intel be a better choice?
    Mark
    MARK.......
    You could buy a new iMac G5!
    That's what I did 2 weeks ago. I went to my Apple
    store and tested out
    both the Intel iMac and the G5 iSight iMac 20' 2.1.
    The G5 iMac is really fast and will definitely do
    everything you want it to
    do and more. Also, current apps will run natively on
    it via PPC. This means
    that there is NO EMULATION PROCESS whatsoever so you
    don't have Rosetta slowing anything down.
    My iMac G5 is by far faster than my Mac Mini and
    faster at running apps until they become universal
    some time this year or next.
    I'm a professional photographer and my G5 iMac is
    awesome! The ONLY real reason you would by a PowerMac
    is for professional video editing. A PowerMac is
    faster at rendering videos and burning them to DVD
    and stuff.
    I decided to stay with a PPC G5 iMac and might
    upgrade next year sometime if really necessary. But
    this G5 will definitely work for me and all I need to
    do for at least a year if not 2 years.
    If you max out a G5 iMac, you'll be more than happy!

  • Transfer Data from Power Mac to Mac Pro

    Hello and thanks in advance for any help.
    I am thinking of upgrading from a Power Mac to a Mac Pro. Currently I have approx 3tb of data on an internal raid on the Power Mac.
    This data is backed up via eSata to external drives. If I upgrade to a Mac Pro how would I transfer my data to the required thunderbolt drives I will need.
    What additional cables or hardware (other then the thunderbolt drive) is required to facilitate the transfer.
    Cheers
    Tony

    Hi Tony,
    If you are just copying some data files you could:
    If they are connected on a LAN, just mount one the PowerMac's drives onto the MacPro.
    If they are not, you could get something like this and plug the backup drive directly into the Mac Pro. This is probably the fastest.
    If you are also considering a more complete move of files (home folders, Library, Apps etc) you need to be careful you don't bring across any unsupported apps and supporting files. Here is a basic migration guide. I think you can use the Migration Assistant.

  • Video Card Recommendation for Power Mac G5 Quad

    Can anyone recommend a video card upgrade for my Power Mac G5 Quad?
    I am now running the nVIDIA GeForce 6600 card that came in the machine, but I'm wondering how much performance increase I'll see with a large image library in Aperture if I upgrade. I'm interested in all comments.
    Also, is there a "medium" upgrade and a "kick-***" upgrade?
    Thanks!
    G5 Quad / 4.5GB   Mac OS X (10.4.8)  

    I hate to say it: At the moment there is no graphics card upgrade available for the G5 Quad and the other PCI-Express Power Macs. There are a lot of threads about this topic in this forum. It is simply a shame that Apple does not offer any graphics upgrade for their former top of the line machines - but they do offer them for their new Intel Mac Pro. Maybe one day ATI will offer an upgrade, but at the moment this is just a rumor. All you can do now is to buy a reflashed PC version of the GeForce 7800 or buy a ridiculously priced spare part GeForce 7800 from a store who is willing to sell you one (there is one on the web but i forgot the url).
    Power Mac G5 DualCore 2GHz   Mac OS X (10.4.8)  

  • What do I need to make my Dual 2 GHz Power Mac G5, 512 MB DDR2 SDRAM wireless?

    I was looking at getting this
    http://www.amazon.com/gp/aw/d/B0000899ZB/ref=mp_s_a_1?qid=1363349066&sr=8-1&pi=S L75
    But it's not compatible with the Mac Pro or the Power Mac G5 Dual and Power Mac G5 Quad computers.
    I'm having a hard time find what is compatible.

    Dual Processor and Dual Core are not the same.
    The Late 2005 G5 had single dual core processors in 2.0 and 2.3 GHz, with the Quad having dual dual core processors.
    Earlier G5s were all pre-multi core processors, so would be dual processors.
    If your machine is a PowerMac 11,2, the special Airport Extreme/Bluetooth module on the runway card (must have) is what your machine uses.
    The following explains teh "kit":
    http://www.dvwarehouse.com/Apple-AirPort-Extreme/Bluetooth-Upgrade-Kit-for-Power -Mac-G5-Dual-Core--Quad-Core-Late-2005--MA252G/A---Refurbished-p-36513.html

  • Need new low-end graphics card for Power Mac G5 (PowerPC 970)

    My Power Mac G5 (PowerPC 970) has recently died I believe due to a bad
    ATI RADEON X800 XT MAC EDITION video card.
    Reason for thinking its the card, is that the machine was performing its intended tasks for several days even though the monitor was snow.
    Having trouble determining a low-end replacement. (I no longer need the enhanced features of the RADEON X800 for this machine.
    Much appreciated if someone could suggest a product appropriate for PowerPC 970.
    Thanks!

    I also ran into this issue with my dual G5. When I bought it, I didn't get wireless because it was a dedicated desktop on the network, but I'm upgrading and giving it to the kids to use in a room without wired network. Now that wireless would be really nice and it looks like the official solution is:
    "Apple Wireless Upgrade Kit for Power Mac G5 Dual or Power Mac G5 Quad MA252G/A"
    which is really expensive and difficult to install. But the weird thing is that I do have bluetooth. I wonder if there's just some little doodad I need to connect to get wireless going too, but I can't find any info on the card, and it looks like it's buried on the motherboard behind all the cooling stuff. I'll probably just spring for one of the USB solutions.

  • Power Mac G5: A common dilemma: to upgrade or buy new

    I know there are a lot of discussions on this topic going around, but everyone's needs and uses are different, so I'd appreciate any input on my situation.
    I own a Dual 1.8 GHz Power Mac G5 with only 1GB RAM and a failing 160GB hard drive.
    At this point, I basically only use this machine for web browsing, iTunes, and Garageband, and am running Tiger.
    I had been having some major hard drive problems so I wiped my system and re-installed Tiger , importing everything from my iBookG4 (which, I recently dropped and the screen connection has failed and is unusable except for as an external hard drive in target disk mode. it is probably too expensive to fix for what its worth so I will probably try to sell it for scrap).
    Anyway, everything was ok for about a week until I opened firefox and noticed all my settings and bookmarks were gone. When I restarted my computer, my music, pictures, documents, and movies folders were all unable to be located (although my applications were fine and my hard drive still showed that the space was the same). I'm not sure if I imported some problem from my iBook or if my hard drive was just messing up again, but I've decided that I either need to upgrade or get a new computer.
    Basically, I am thinking about upgrading my memory, getting a new hard drive, and upgrading to leopard (mostly for time machine). Or, possibly getting a new iMac or waiting a bit and then getting a new iMac or even (gasp) a PC (highly unlikely).
    I was going to get the memory from ramjet and I was thinking of only adding 1GB to make 2GB but could be persuaded of getting more but 400Mhz DDR memory is a bit more expensive than other types. As for the hard drive, I was thinking about getting a Seagate Barracuda 7200.10 SATA 3.0Gb/s 320-GB Hard Drive with a 16 MB cache. I could pay $15 more for a 500GB with 32 MB cache but i really don't need the space and am unsure whether the cache will really help much. Seagates used to have a pretty good rep I thought, but now they seem to be getting mixed reviews, so I don't know.
    Obviously, I am no computer expert, so any help would be great. Would it be worth it to spend between $250 and $325 to get the memory, drive, and leapord when I could maybe sell my G5 and my 23" apple cinema display (the old clear kind) and get an iMac? I could maybe get about $700 - $800 for the G5 and around $300 - $350 for the display. Will an iMac be faster than my G5 with the upgrades? I don't think I need a mac pro for my current uses.
    Thanks for your help. Feel free to offer advice on what to do with my iBook too.
    -rhineth

    Memory: $60 for 2 x 1GB, I'd call that very affordable.
    http://eshop.macsales.com/item/Other%20World%20Computing/3200DDR2GBP/
    Disk drives: 2 x $69 for pair of WD Caviar 640GB
    http://eshop.macsales.com/item/Western%20Digital/WD6400AAKS/
    It is not about capacity as much as speed and quiet, cool, and how well it handles OS X. I use half the drive, other half is unformatted free space. I'd skip the Seagates. 7200.11 is current.
    I expect new iMacs in '09 as they are overdue.
    Hard drives you keep or put in FW case.
    Current Leopard is 10.5.4 DVD but would be nice to see another DVD now with 10.5.6, $109 (Amazon, maybe less Newegg?).
    iMac vs others:
    http://www.macworld.com/article/133467/2008/05/imaccomparison.html
    http://www.barefeats.com/harper7.html
    http://www.barefeats.com/imp02.html
    Sounds like three things you may not be doing or have:
    SuperDuper for backups. You don't need Leopard.
    Disk Warrior. Everyone, or I should say "HFS+" needs #1 disk repair utility.
    Backup drives. Two backup sets you switch between, and a small "emergency" partition on one for running Disk Warrior and such.
    I replace or move older drives to backup use and put new boot drive in on a yearly basis. Some new drives and memory should be all you need. A couple people even stress their system with graphics and video, and upgrading to 3 or 4 new drives revived their system so that they could hold on and wait another year.

  • Power Mac G4 sleep mode issue using 10.5.8

    Hello All,
    If this is posted in the wrong discussion room, let me know.
    I have a problem and I am not sure what to do at this point. For reference to understand the problem, I have a Power Mac G4 Dual 1.25Ghz MDD 2003(No FW 800) with an Apple Cinema Display. I also have a USB 2.0/FW 400 PCI card installed. I use this card to connect my external HD's.
    The problem I am having is that the machine does not fall asleep properly using Leopard. When I manually put the computer to sleep, the monitor and external HD's shut off, but the fan stays on. When I try to wake the computer by hitting keys on the keyboard or moving the mouse, the computer will not wake the monitor or the External HD's. Furthermore, it freezes the computer when it is in the mode and the only way for the computer to function again is if I restart.
    Until a month ago, I was running Tiger, 10.4.11, on my machine and had absolutely no problems with sleeping my Mac. I decided to go to Leopard, 10.5.8, and used the clean install option. I then used migration assistant to grab all my data and settings from a backup using Carbon Copy Cloner.
    Using 10.4.11, I would usually let the computer sleep after 15 minutes of idling. Now, under 10.5.8, the computer freezes after the sleep mode is attempted.
    At first I assumed that the computer was preparing itself to sleep and might take a while. I decided to wait it out to see if the computer would eventually fall asleep. I waited an hour but the computer maintained the same status with the fans blowing and the front power button light staying lit. And, of course, the keyboard and monitor were not responding.
    I read some forum discussions that suggested to people with similar problems to consider removing anything connected to the PCI card. It was suggested that the HD's were keeping the computer awake. I tried removing each HD one at a time to see if it was a particular HD causing the problem. With each configuration that I tried to put the computer to sleep, the same result occurred.
    At this point, I am at a loss. I love my PowerMac and don't feel the need to upgrade as my most of my needs are met with this machine. This problem is not a deal breaker for me, but it is an annoying to have to restart after leaving the computer for a while. I know the other option is to shutdown and startup each time I leave the computer for any timeframe longer than 30 minutes, but is annoying and I don't know how bad it is for the computer to be shutdown and started again so frequently. If there is a fix to take care of this problem, I am willing to try it.
    Any advice would be appreciated.
    Thanks in advance,
    Maverick

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Upgrade Power Mac G5 Quad to Leopard

    Hi, we have a Power Mac G5 M9592LL/A with Mac OS X 10.4.11 (8S165) and I would like to install Leopard 10.5.8.
    Where can I buy this upgrade?
    Regards

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    The DVD should look like this
    Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
     Cheers, Tom

  • I have a power mac g4 with 10.3.9 can I upgrade to 10.4.11

    I have been given a power mac g4 733mhz tower. It powers up and I can get around inside. I have no start up disk or anything else with it but the mouse and key board. Im afraid to sign out not having the passwords for the tower. Being that when it starts up with out having to log in will I be able to upgrade from 10.3.9 to 10.4.11? Is there anyway to get this tower reimaged so that I can set it up for my own use and have my passwords inplace? Thank you in advance for any help anyone can give me.
    Jon

    Welcome To  Discussions Jon!
    Tiger is available for purchase at The Apple Store (U.S.).
    If you know what to look for, a Full Retail Version, of the Tiger Install DVD, can also be purchased, sometimes less expensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, AllMac, etc.
    This is the correct one Mac OS X 10.4.6 Tiger, (DVD) Retail at FastMac.
    And at HardCore Mac.
    Both are more expensive, than The Apple Store (U.S.).
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Tiger is on DVD.
    The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    Caveat Emptor!
    If any are presently available, examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
    Tiger On eBay
    If your Mac meets the Tiger System Requirements, once Tiger 10.4.x is installed, you can use the PPC 10.4.11 Combo Update, to upgrade to the current version.
    Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
    Info here Installing Tiger Using Firewire Target Disk Mode.
    And here Installing Tiger Without A DVD Drive.
    The Tiger Media Exchange Program, referred to, is no longer available.
    There is also a version available on CDs, at FastMac.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

Maybe you are looking for

  • How to use Generic Object Services(GOS) for each table control record.

    Dear Expert,                    I am using generic object services for document attachment but i am facing a problem while attaching document to a table control row. my requirement is to attach separate document for each and every row of table contro

  • Will a new 320gb hard Drive work in a T60p?

    I have a T60P, Vista Business, latest bios. Specifically, I would like to install a Western Digital Scorpio, 320gb, 7200rpmm sata drive. It is the same dimensions and has the same connections as the origional drive. Any suggestions would really be ap

  • Union of 2 columns in OBIEE 10g

    I have 2 columns, Global Amount and Opening Amount, The requirement is to get both sets of amounts into one column. I know I have to do a union of the two but when I try to combine two similar requests, it gives me an error. What is the best way to g

  • My CD burner won't work

    I have a new music CD I want to put on my iPod, but my CD stopped working. Is there a way to open iTunes on a different computer then put the songs in my iTunes library? I am at the library now and brought the music CD and also a flash drive thinking

  • Can't save png extension anymore, Save As Type is blank, already reset and uninstalled?

    Before I was able to Right Click > Save Image As and it would give me the extensions as a drop down menu. Now it shows a blank Save As dropdown bar if I try to save .pngs, and the only other thing I can select is Save As > All Type. I already tried a