Upgrade related queries..
Hi,
1) What is the replacement FM for "GET_FIELDTAB" .
2) In Replacement FM "popup_to confirm", are parameters "textbutton1" and text_button2" required..?In the earlier replacements , I have not passed these parameters , do i need to check it again..?
Thanks ,
Vasuki
hi
good
check this
CACS_GET_TABLE_FIELDS.
thanks
mrutyun^
Similar Messages
-
Hello Friends,
We are planning to upgrade BW 3.5 to 7.0 and I am preparing documentation on upgrade related activities.
I would like to know the conversion related efforts and I would appreciate if you can share some documents.
Do I have attend a demo workshop to learn more on upgrade activities?
Do we loose any data or any queries during upgrade?
What kind of functionality test we would have to perfrom?
What kind of regression testing activities, we would have to perform?
What kind of post upgrade activities to be performed?
I reviewed some threads from SDN, but didn't get a clear picture on above questions.
Thanks
Priyahi priya,
check out this link....
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
add these too....
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
https://wwwn.sdn.sap.com/irj/sdn/wiki?path=/display/bi/upgrade%2bof%2bbi%2bto%2bsap%2bnetweaver%2b2004s
hope it will help... -
Hello all,
In our project we are using Automotive Industry module.
so now i want to take Automotive module BW SD related queries from
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/50/296fe7bf1a474f84d5955cedefa0a3/frameset.htm]
Please tell me BW sd queries from the above link.
Regards.
Edited by: Ranga123 on Mar 24, 2010 2:28 PMno one is answering my question, so admin please delete this thread.thanks.
-
AME related queries, where to post ?
Hi all,
Can you please tell me where should we post our AME related queries. Since Oracle treats it as part of HRMS, do we post those queries in this forum ? Or is there any separate forum for this purpose. Please provide me the link as well, if you can.
Thanks a lot in advance.You can post it here I think
-
What are the Upgrade related syntax errors
Hi Sudheer,
pls go through the upgrade issues and its solutions...
hope it helps u...
Upgrade Tips & Key Learnings
Problem 1:
In DBCHK_PRE phase in PREPARE RUN fails with the message
Error: Shared library path is insufficient
Solution
Before executing Upgrade Assistant server and GUI please append this
environment variable in both shells with following value and also refer SAP Note:
817463
LD_LIBRARY_PATH-->Append with /sapdb/programs/lib/lib64
Problem 2:
In Upload_Request Phase in PREPARE RUN fails with the message
Error: Full access to directory /usr/sap/trans denied
Solution:
Provide chmod 777 permission to the directory /usr/sap/trans
Problem 3:
In SHDINST_SDB_CHK phase in PREPARE RUN fails with message
Error: Error by create user SAP<SID>SHD
Solution:
We need to create this user manually in Database. Please also refer to SAP Note
39439
Problem 4:
In 'Installation Module' of PREPARE RUN it fails to add the shadow instance
port entries in /etc/services
Solution:
50
Manually enter the shadow instance sapmsSHD<SID>, Sapgw<SYSNR>,
sapdp<SYSNR> and repeat the phase.
Problem 5:
In 'General Checks Module' of PREPARE RUN it fails for Permission issue for
files
Solution:
Add the write permission for the files /usr/sap/<SID>/SYS/exe/run/icnbmd and
/usr/sap/<SID>/SYS/exe/run/saposcol
Problem 6:
In ACT_REL phase of SAPUP it fails with message index /table WEB_FILES
couldn't be activated
Solution:
Please refer SAP Note: 847019
Problem 7:
After the completion of NW2004s ABAP upgrade. We found that saposcol was
missing from /usr/sap/<SID>/SYS/exe/run
Solution:
Copy the saposcol from the directory /usr/sap/put/exe
Errors encountered while executing BEX Applications in Portal
Problem 8
You call a Business Explorer (BEx) Web Application (Java) and the system
Displays the following error message instead of the BEx Web Application:
Portal runtime error
Access denied
This problem may arise because of missing authorizations for the
Security zone in which the BEx Web Application is executed in the
Portal,
51
Solution
Please apply the SAP Note 872043
Problem 9
When you execute a Web Application (NetWeaver2004s), the following
Error message appears: Parameter HIERARCHY_DATE does not exist.
Solution
Import Support Package 07 for SAP NetWeaver 2004s BI (BI Patch 07 or
SAPKW70007) into your BI system. Otherwise, you can enter the table entries
manually as mentioned in note 923122
regards,
rudra...
Assign points if useful... -
Automotive Industry SD Related Queries
Hello all,
In our project we are using Automotive Industry module.
so now i want to take Automotive module SD related queries from
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/50/296fe7bf1a474f84d5955cedefa0a3/frameset.htm]
Please tell me sd quries from the above link.Check this link
[SAP Best Practices for Automotive|http://help.sap.com/content/bestpractices/industry/bestp_industry_automotive.htm]
thanks
G. Lakshmipathi -
1. How can we view and rectify the errors or warnings caused ,while we create a new idoc ,which may be an extension of an existing basic Idoc type(at Transaction code we30)?
2. How can we delete an Idoc created,if its already been released (at Transaction code we30) and configured(at transaction code we82)?
3. Is that mandatory that the check box Mandatory field should always be checked,whenever we create(extend) a new segment to an existing segment(at transaction code we30)?
4. On what basis,we can identify that To which existing segment - we can append our needed segment(new segment if any to be appended)?Hi Nagarajan,
Answers for your questions:
1)How can we view and rectify the errors or warnings caused ,while we create a new idoc ,which may be an extension of an existing basic Idoc type(at Transaction code we30)?
WE30 is created for IDOCs. First set break point related user exit.For testing WE19. Just enter that error IDOC number in WE19 and press F8. Then it will display the segments. Then press /H in the command box and press inbound function module push button (Just side of inbound push button). Then it will open in debug mode. we can test.
2. How can we delete an Idoc created,if its already been released (at Transaction code we30) and configured(at transaction code we82)?
Yes it is possible to delete hte IDOC which is released from our system, i think thorugh remote function but i am not sure.
3. Is that mandatory that the check box Mandatory field should always be checked,whenever we create(extend) a new segment to an existing segment(at transaction code we30)?
Based on the requirement we can select that check box. suppose it u upload the data for MM01 t-code then observe what are all the manditory feilds in that screen. Based on that choose mandotory check box for proper fields in the segment.(In MM01 suppose meterail number is manditory then while creating segment select that manditory chk box for MATNR)
4. On what basis,we can identify that To which existing segment - we can append our needed segment(new segment if any to be appended)?
Based on the basic IDOC type and given information from the user.
Hope this helps you, reply for queries,
Regards.
kumar. -
Adobe create suite 64-bit related queries
Hi,
I have following couple of questions related to 64-bit support in Adobe Products.
1. Would like to know Adobe Illustrator CS3,CS4 and CS5 support 64-bit?
2. Would like to know Adobe Photoshop CS3,CS4 and CS5 support 64-bit?
3. Heard that CS5 would support 64-bit. All application underneath Creative Suite 5 would support 64-bit.
4. does 32-bit and 64-bit have separate installer or same installer can be installed in 32-bit and 64-bit as well?.
5. In which Window platform CS 64-bit will be supported?
6. In which MAC platform CS 64-bit will be supported?
7. Separate licence to be purchased for 32-bit & 64-bit? or same license can be used?
Please clarify the above queries.
Regards,
AvudaiappanFind answers inline.
AvudaiappanSornam wrote:
Hi,
I have following couple of questions related to 64-bit support in Adobe Products.
1. Would like to know Adobe Illustrator CS3,CS4 and CS5 support 64-bit?
Illustrator CS5 is not 64 bit.
2. Would like to know Adobe Photoshop CS3,CS4 and CS5 support 64-bit?
Photoshop CS5 is 64 bit
3. Heard that CS5 would support 64-bit. All application underneath Creative Suite 5 would support 64-bit.
Since answer to question number 1 is no you know the answer
4. does 32-bit and 64-bit have separate installer or same installer can be installed in 32-bit and 64-bit as well?.
Same download can install 64 bit if you have a 64 bit OS
5. In which Window platform CS 64-bit will be supported?
XP, Vista, Win 7
6. In which MAC platform CS 64-bit will be supported?
10.5.7 and 10.6.x
7. Separate licence to be purchased for 32-bit & 64-bit? or same license can be used?
I beleive no, but you can always cross check with Adobe/reseller before purchasing
Please clarify the above queries.
Regards,
Avudaiappan -
Relational queries through JDBC with the help of Kodo's metadata for O/R mapping
Due to JDOQL's limitations (inability to express joins, when relationships
are not modeled as object references), I find myself needing to drop down to
expressing some queries in SQL through JDBC. However, I still want my Java
code to remain independent of the O/R mapping. I would like to be able to
formulate the SQL without hardcoding any knowledge of the relational table
and column names, by using Kodo's metadata. After poking around the Kodo
Javadocs, it appears as though the relevant calls are as follows:
ClassMetaData cmd = ClassMetaData.getInstance(MyPCObject.class, pm);
FieldMetaData fmd = cmd.getDeclaredField( "myField" );
PersistenceManagerFactory pmf = pm.getPersistenceManagerFactory();
JDBCConfiguration conf = (JDBCConfiguration)
((EEPersistenceManagerFactory)pmf).getConfiguration();
ClassResolver resolver = pm.getClassResolver(MyPCObject.class);
Connector connector = new PersistenceManagerConnector(
(PersistenceManagerImpl) pm );
DBDictionary dict = conf.getDictionary( connector );
FieldMapping fm = ClassMapping.getFieldMapping(fmd, conf, resolver, dict);
Column[] cols = fm.getDataColumns();
Does that look about right?
Here's what I'm trying to do:
class Foo
String name; // application identity
String bar; // foreign key to Bar
class Bar
String name; // application identity
int weight;
Let's say I want to query for all Foo instances for which its bar.weight >
100. Clearly this is trivial to do in JDOQL, if Foo.bar is an object
reference to Bar. But there are frequently good reasons for modeling
relationships as above, for example when Foo and Bar are DTOs exposed by the
remote interface of an EJB. (Yeah, yeah, I'm lazy, using my
PersistenceCapable classes as both the DAOs and the DTOs.) But I still want
to do queries that navigate the relationship; it would be nice to do it in
JDOQL directly. I will also want to do other weird-ass queries that would
definitely only be expressible in SQL. Hence, I'll need Kodo's O/R mapping
metadata.
Is there anything terribly flawed with this logic?
BenI have a one point before I get to this:
There is nothing wrong with using PC instances as both DAO and DTO
objects. In fact, I strongly recommend this for most J2EE/JDO design.
However, there should be no need to expose the foreign key values... use
application identity to quickly reconstitute an object id (which can in
turn find the persistent version), or like the j2ee tutorial, store the
object id in some form (Object or String) and use that to re-find the
matching persistent instance at the EJB tier.
Otherwise, there is a much easier way of finding ClassMapping instances
and in turn FieldMapping instances (see ClassMapping.getInstance () in
the JavaDocs).
Ben Eng wrote:
Due to JDOQL's limitations (inability to express joins, when relationships
are not modeled as object references), I find myself needing to drop down to
expressing some queries in SQL through JDBC. However, I still want my Java
code to remain independent of the O/R mapping. I would like to be able to
formulate the SQL without hardcoding any knowledge of the relational table
and column names, by using Kodo's metadata. After poking around the Kodo
Javadocs, it appears as though the relevant calls are as follows:
ClassMetaData cmd = ClassMetaData.getInstance(MyPCObject.class, pm);
FieldMetaData fmd = cmd.getDeclaredField( "myField" );
PersistenceManagerFactory pmf = pm.getPersistenceManagerFactory();
JDBCConfiguration conf = (JDBCConfiguration)
((EEPersistenceManagerFactory)pmf).getConfiguration();
ClassResolver resolver = pm.getClassResolver(MyPCObject.class);
Connector connector = new PersistenceManagerConnector(
(PersistenceManagerImpl) pm );
DBDictionary dict = conf.getDictionary( connector );
FieldMapping fm = ClassMapping.getFieldMapping(fmd, conf, resolver, dict);
Column[] cols = fm.getDataColumns();
Does that look about right?
Here's what I'm trying to do:
class Foo
String name; // application identity
String bar; // foreign key to Bar
class Bar
String name; // application identity
int weight;
Let's say I want to query for all Foo instances for which its bar.weight >
100. Clearly this is trivial to do in JDOQL, if Foo.bar is an object
reference to Bar. But there are frequently good reasons for modeling
relationships as above, for example when Foo and Bar are DTOs exposed by the
remote interface of an EJB. (Yeah, yeah, I'm lazy, using my
PersistenceCapable classes as both the DAOs and the DTOs.) But I still want
to do queries that navigate the relationship; it would be nice to do it in
JDOQL directly. I will also want to do other weird-ass queries that would
definitely only be expressible in SQL. Hence, I'll need Kodo's O/R mapping
metadata.
Is there anything terribly flawed with this logic?
Ben
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com -
Cisco Security Manager related queries
In one of our projects, we are running CSM 3.2 on VMWare ESX 3.5.There is a project in place to have the ESX upgraded to 4.1
This looks like a challenge as CSM 3.2 is not supported on ESX 4.1. Cisco TAC has suggested to upgrade CSM to 4.2
Queries:
1. CSM 3.2 to 4.2, will it involve additional license cost?
2. If we upgrade CSM 3.2 to 4.2 and then upgrade ESX from 3.5 to 4.1, will it be back immediately without anything required to be done on CSM end, once VMWare is upgraded.
3. Is there any other preferred solution/workaround to manage the situation
4. If we have to move CSM from one ESX to another, what would be the steps involved to retain the same configuration and logs.
Regards,
NitinTo migrate from 3.2 to 4.2, you will need to acquire a 4.2 license. The part number depends on how many devices your 3.2 installation is licensed for. Please refer to Table 2 on this announcement. You Cisco reseller or partner can provide you a quote but if you search the Internet for that part number you can see typical costs.
The procedure for upgrade would be to first move to an interim step of CSM 4.0 and then to 4.2. Please refer to this guide. Also see the section on that guide on moving to a new server for how to handle your ESX upgrade / migration. -
HI Friends,
i have some queries which are RFC related.Can you please clarify them-:
1)What does this syntax mean
call function 'FM' destination 'dev-60'
if i use this syntax in dev-90 FM , will it excute the above given remote enabled FM in dev-60.
can i use this syntax in the same remote enabled FM .
Thanks and Regards,
Sakshi
Thanks and Regards,
SakshiHello Sakshi,
This is a basic question which can be answered by googling. It is real easy, try this [link|http://tinyurl.com/yeqwqfv].
BR,
Suhas -
Dear all,
Please, help me to provide the answers or document for the followinf queries.
1. Major difference between Oracle 6iDS and Oracle 9iDS.
2. Can I Execute application developed in Oracle 6i
(Client-Server) as is in Oracle 9iDS?
3. Can I execute forms developed in Oracle 9iDS without
Application Server?
4. Equivalent of DFLT.PRT (available in 6i) in Oracle 9iDS
You can also send me the document (if any) by mail. My mail id is [email protected]
ThanksHi,
1. Major difference between Oracle 6iDS and Oracle 9iDS.
- Listener Servlet architecture
- Web only
- 25+ new features (design, deployment and architecture)
2. Can I Execute application developed in Oracle 6i
(Client-Server) as is in Oracle 9iDS?
You need to re-compile them. Also there are some obsoleted built-ins that you need to migrate if you use them. There is a migration assistant contained in the DeveloperSuite (FMA)
3. Can I execute forms developed in Oracle 9iDS without Application Server?
Only with Oracle9iDS there is a stand alone OC4J instance that you use for designtime testing your application. For production the only supported application server is Oracle Application Server
4. Equivalent of DFLT.PRT (available in 6i) in Oracle 9iDS
Sounds Reports related and I would try this question on their forum.
See also the 9i collateral on http://otn.oracle.com/products/forms
Frank -
Hi!
We are currently in the middle of upgrading to NW2004s from 3.5. So far, we have completed a test upgrade on the development system.
When opening workbooks, we can see that the query and workbook objects being upgraded on the fly, which decrease performance. To avoid this we have to resave the workbook, in order to convert all objects.
So my questions are:
1) Does anyone know if it.s both the workbook and the query that has to be resaved?
2) Which upgrade strategy has been used when it comes to migrating workbook and queries?
To let the end-users access via the 3.5 add-ins to start with
*To resave all the queries and/or workbooks after been upgraded
To let the end-user resave when appropriate
Or any other methods?
Thanks in advance!
BjørnHello,
I thought I would share our experience with workbook conversion issues so far. We are upgrading the toolset after having done the technical upgrade, implemented new analysis authorizations, and implemented support packs up to 12.
In our area we have a set of reports (workbooks)that are formatted to a very high degree, using Excel more than the BEx (3.5) settings, although we have both. Some examples are 1) in general the column widths and texts have to remain static to retain the proportions of the report and for printing, and 2) we redid BEx Exception cell formatting with Excel Conditional cell formatting since the users wanted blue as a condition (this is what we did, maybe there is a better way...), 3) graphs, print settings etc.
In order to make some of these settings in 3.5 we had to turn off the query property "adjust format after refresh". I believe the same setting in 7.0 is "Adjust formatting" checkbox on the Analysis Grid properties. Another setting we used extesively in 3.5 was the query setting "adjust column width on refresh - set to "do not adjust". In 7.0 the equivalent is also on the Analysis grid properties "Auto Fit".
My thought right now is that the "Adjust formatting" is not carrying over during the upgrade process, in other words turning off "adjust format after refresh" seems to convert to having the " Adjust formatting" checkbox checked, which wipes out everything after refresh, including the standard BEx format. I have come up with a way to manually convert them, but ultimately involves a fair amount of rework. Many of our other users create workbooks and queries in an adhoc process, so we are communicating to them that they will need to go through this process, and there may be rework. We are finding the 3.5 vs. 7.0 workbook creation process to be significantly different which was unexpected for us at least.
Hope that experience might be helpful, we are still working on it ourselves. -
[SOLVED] Emesene isn't working as expected anymore (upgrade related ?)
Hello,
Yesterday, I used emesene, it was working perfectly well, and today it isn't anymore: It's very laggy, I can't talk to anyone because the GUI is just a grey box which doesn't show conversations windows, of the list of contacts anymore.
This morning I did a pacman -Syu, but emesene wasn't upgraded, python neither:
[2012-03-20 13:52] Running 'pacman -Syu'
[2012-03-20 13:52] synchronizing package lists
[2012-03-20 13:52] starting full system upgrade
[2012-03-20 13:57] upgraded libtasn1 (2.9-2 -> 2.12-1)
[2012-03-20 13:57] upgraded vlc (2.0.0-8 -> 2.0.1-1)
[2012-03-21 13:49] Running 'pacman -Syu'
[2012-03-21 13:49] synchronizing package lists
[2012-03-21 13:49] starting full system upgrade
[2012-03-21 13:50] upgraded bash (4.2.024-1 -> 4.2.024-2)
[2012-03-21 13:50] upgraded device-mapper (2.02.90-1 -> 2.02.95-1)
[2012-03-21 13:50] upgraded iproute2 (3.2.0-2 -> 3.2.0-3)
[2012-03-21 13:50] upgraded libdrm (2.4.31-1 -> 2.4.32-1)
[2012-03-21 13:50] upgraded lvm2 (2.02.90-1 -> 2.02.95-1)
[2012-03-21 13:50] upgraded neon (0.29.6-3 -> 0.29.6-4)
[2012-03-21 13:50] upgraded openssl (1.0.0.h-1 -> 1.0.1-1)
[2012-03-21 13:50] upgraded psmisc (22.15-1 -> 22.16-1)
Does anyone is having the same issue ?
Thanks !
Last edited by Lowra (2012-03-31 19:02:51)Actually kmess is crashing as well 20 seconds after I login after I did the same updates. Seems to be related to this problem
Application version: 2.0.6.2Application version: 2.0.6.2
Compiled at: KDE 4.8.1 (4.8.1), Qt 4.8.0
Running at: KDE 4.8.1 (4.8.1), Qt 4.8.0
73.713> No backtrace could be generated, gdb timed out.
73.717> KDE backtrace: "[
0: /usr/lib/libkdecore.so.5(kRealBacktrace(int)+0x35) [0x7fda20d565e5]
1: kmess() [0x561eca]
2: /lib/libc.so.6(+0x349f0) [0x7fda1b4949f0]
3: kmess() [0x4b3850]
4: kmess() [0x4b3861]
5: kmess() [0x4b3861]
6: kmess() [0x4b3861]
7: kmess() [0x4af4b5]
8: kmess() [0x4d4eb8]
9: kmess() [0x4d5cc7]
10: kmess() [0x4d73e0]
11: /usr/lib/libQtCore.so.4(QMetaObject::activate(QObject*, QMetaObject const*, int, void**)+0x2b1) [0x7fda1d071f11]
12: kmess() [0x52c431]
13: kmess() [0x52c483]
14: kmess() [0x52fabd]
15: /usr/lib/libQtCore.so.4(QMetaObject::activate(QObject*, QMetaObject const*, int, void**)+0x2b1) [0x7fda1d071f11]
16: /usr/lib/libQtCore.so.4(QObject::event(QEvent*)+0x99) [0x7fda1d076e09]
17: /usr/lib/libQtGui.so.4(QApplicationPrivate::notify_helper(QObject*, QEvent*)+0xb4) [0x7fda1c1cd8c4]
18: /usr/lib/libQtGui.so.4(QApplication::notify(QObject*, QEvent*)+0x113) [0x7fda1c1d2743]
19: /usr/lib/libkdeui.so.5(KApplication::notify(QObject*, QEvent*)+0x36) [0x7fda20806556]
20: /usr/lib/libQtCore.so.4(QCoreApplication::notifyInternal(QObject*, QEvent*)+0x8c) [0x7fda1d05e06c]
21: /usr/lib/libQtCore.so.4(+0x1a9ef2) [0x7fda1d08eef2]
22: /usr/lib/libQtCore.so.4(+0x1a789d) [0x7fda1d08c89d]
23: /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x1dd) [0x7fda162c08bd]
24: /usr/lib/libglib-2.0.so.0(+0x450b8) [0x7fda162c10b8]
25: /usr/lib/libglib-2.0.so.0(g_main_context_iteration+0x69) [0x7fda162c1289]
26: /usr/lib/libQtCore.so.4(QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>)+0x6f) [0x7fda1d08d0bf]
27: /usr/lib/libQtGui.so.4(+0x26cf8e) [0x7fda1c270f8e]
28: /usr/lib/libQtCore.so.4(QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>)+0x32) [0x7fda1d05ce52]
29: /usr/lib/libQtCore.so.4(QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>)+0xf7) [0x7fda1d05d0a7]
30: /usr/lib/libQtCore.so.4(QCoreApplication::exec()+0x85) [0x7fda1d061c05]
31: kmess() [0x43b6a0]
32: /lib/libc.so.6(__libc_start_main+0xed) [0x7fda1b48138d]
33: kmess() [0x43b731]
KCrash: Application 'kmess' crashing...
KCrash: Attempting to start from kdeinit
sock_file=/home/ilusi0n/.kde4/socket-ArchBl0w/kdeinit4__0
KCrash: Attempting to start directly
KCrash failed to exec(), errno = 2
Last edited by ilusi0n (2012-03-22 08:00:56) -
Getting errors for date related queries in oracle 11G
Hi,
We are having oracle 10.2.0 version and all the date queries are running , but one database has been upgraded to oracle 11g.
Those queries are giving errors :
SELECT * FROM USERLOGMST WHERE TO_DATE(LOGINDATE,'YYYYMMDD')>=SYSDATE-60
Ora-01841: (full) yearmust bee between -4713 and +9999, and not be 0.
But the same query is giving output in 10.2.0
Can any one suggest me in rectifying this problem.
thankyou
satya>
We are having oracle 10.2.0 version and all the date queries are running , but one database has been upgraded to oracle 11g.
Those queries are giving errors :
SELECT * FROM USERLOGMST WHERE TO_DATE(LOGINDATE,'YYYYMMDD')>=SYSDATE-60
Ora-01841: (full) yearmust bee between -4713 and +9999, and not be 0.
But the same query is giving output in 10.2.0First step - find a few values that are causing the error:
e.g.
select max(logindate), min(logindate) from userlogmst;This may return perfectly reasonable dates, in which case you could use a pl/sql function to scan and report bad dates.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
"Science is more than a body of knowledge; it is a way of thinking" Carl Sagan
Maybe you are looking for
-
How to make vendor payment thru RTGS
Hi, Will someone pl let me know as to how to make vendor payment thru electronic fund transfer? Our vendors are paid thru RTGS. Can some pl let me know the complete business process procedure. And also the configuration required for the same. Thanks
-
Tired of Verizon, Going to COX part 2
I find it hard to believe that Internet only is going to be $135/month.You can go online and change services.Plus is Cox a teaser rate? If so, how long vs contract time?
-
On a recent security audit we we hit because our Cisco devices revealed their SSH version. Is there any way to fix that?
-
CS5 won't update, says I have invalid serial
I just started a new job, and they have CS5 on their Mac, purchased on Tech Soup some years ago. It hasn't been updated much, so I'm trying to get everything current. Half of the products updated, but the core products -- Photoshop, InDesign, etc. --
-
How to cancel a BridgeTalkLongProcess
I have successfully implimented a BridgeTalkLongProcess from the AdobeLibrary1. In my application the user can select the thumbnails in bridge and then run an extensive processing routine in photoshop, with the status palette showing the progress. Th