Upgrade SCM  4.1 - 7.0  issues

Dear All,
We have just Upgraded our Devolopment System from SCM 4.1 to 7.0....
After that we have run " RS_BW_POST_MIGRATION" for activating the BI objects...
After that we run the MPOS and Planning area Consistency Check...
When i load the data in the pllanning book we are getting the below error...
"Internal Error/sapapo/SCMB_PSTRU_TEMPL=>RAISE_EXCEPTION_FRO"
"Error reading  data  - Planning book Can not processed further"
Plz help us to resolve the same...
Thanks in advance,,,
Regards,
Rajesh Patil

Hi,
We have solved the issue...
it is happened becasue of Agreegates  , we have deleted the agregates and created it again and done the con check...
now it is working fine
Regards,
Rajesh Patil

Similar Messages

  • SCM Upgrade 4x to 7 Macros have issues not functioning as expected

    Hi All,
    We have upgraded SCM 4x to 7 and some of macros are not functioning as expected.
    This is a start macro Specifically for lay out attributes macro where many of the key figures are editable, which are not suppose to be.
    I have deactivated and activated, I have also verified the syntax of the production and quality macros. I did not find any difference. but behaving differently.
    Please share your thoughts any one come across this kind of issues.
    Appreciate your help.
    Thanks,
    Sreeni

    Sreeni,
    When you upgraded from 4.1 to 7.X, did you have to go throuh any interim steps like to 5.0 or 5.1 first.
    My understanding is that you can go from 4.1 directly to 7.0.
    Can you share your experience. Do you have any lessons learned that you put into a document that you would share.
    Shane

  • Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System

    Hi,
    I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
    init
    2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
    ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
    KERNEL.TOC'
    SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
    The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
    What is the Solution for the above ERROR. Please help.
    Thanks,
    Ajay.

    > I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
    > So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
    This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
    > OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
    Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
    > And please paste the URL of those rules that this is wrong. Since I didnt read that.
    It's the first entry in every forum, it contains the "Rules of Engagement" which say:
    Please do not Cross post.
    Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
    Just imagine if everyone like you would paste questions in several forums.
    Markus
    Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
    Edited by: Markus Doehr on Jun 15, 2010 5:30 PM

  • Screen saver won't start since Lion upgrade. Two different machines, same issue.

    Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

    For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
    Hope this points the way to solutions for some of the rest of you!
    Cheers!
    Keith

  • HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing

    Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify.  It is as if airplay is not runing.  A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
    I have verified that my iPad mini and apple TV is up to date.
    Airplay enabled, the network is connected with internet.
    It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Troubleshooting Security Software

  • Upgrading SCM 4.1 to 7.0-CIF Enhancements replaced by BADI's

    Dear Experts,
    We are upgrading SCM 4.1 to 7.0. Major thing from the functional side are following CIF Enhancement are removed and given a new BAdi like SMOD_APOCF005 for an example...
    Project (CMOD) was deleted by SAP with the new release and implemented as BaDI.
    APOCF004:Inbound Processing:Production Order/Planned Orders
    APOCF005 :Inbound Processing: Product
    APOCF006:Inbound Processing: Order Document
    APOCF009:Inbound Processing:Reservation Requirements
    APOCF010:Inbound Processing: Sales Order
    APOCF011:Inbound Processing:Stock
    ......etc.
    Require an additional inputs on above change and which are the new BADI'S ?how can we proceed for the same?
    Thanks
    Sunil
    Edited by: Sunil Thakare on Nov 9, 2011 5:50 PM

    Hi Sunil,
    The Product and Location User Exits have been migrated:
    SMOD_APOCF001                       Inbound Processing: Location
    SMOD_APOCF005                       Inbound Processing: Product
    You should be able to use the others as they are.
    Regards,
    Srinivas Gummaluri

  • My iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much.  This is the worst experience  Apple

    my iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much.  This is the worst experience  Apple

    Settings>General>Reset>Reset all settings.
    *Note:* Settings, preferences, network settings, etc *will* be reset. *NO data or media will be lost*
    and/or
    Settings>iCloud>Documents and Data (turn it OFF)
    If you want to voice your opinion, please do so here:
    http://www.apple.com/feedback/

  • I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

    I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

    Try this repair, ensure you complete all the tasks and in the order shown:
    1  delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to           do this, its freeware
    2  restart the Mac;   Apple menu > restart
    3  immediately after the start chime,  press the shift key until you see the Apple symbol.
             let it fully boot up,  it will take longer as the OS is repairing the drive
    4  when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive  then First Aid tab and           click  repair disc permissions
    5  when complete, restart the Mac normally
    6  install Keynote from the Mac App Store
    Please report back to let us know if this helped.

  • UWLJWF upgrade from EHP1 SPS6 to SPS8 issue, Oracle and windows 2008

    Hi,
    I am trying to upgrate this component UWLJWF in our production system and i get an error:
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  <<< Analyze table KMC_WF_SUBSTITUTE >>>
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  <<< Analyze table KMC_WF_SUBSTITUTE >>>
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  predefined action is: >>>null<<<
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  predefined action is: >>>null<<<
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 ora-Info:  compareTo PROFILE: column length 127 larger than length 84 of target column
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  KMC_WF_SUBSTITUTE modify column PROFILE from type : VARCHAR,len : 127,dec : 0,not null : true,default : | |
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  KMC_WF_SUBSTITUTE modify column PROFILE from type : VARCHAR,len : 127,dec : 0,not null : true,default : | |
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  KMC_WF_SUBSTITUTE modify column PROFILE to   type : VARCHAR,len : 84,dec : 0,not null : true,default : | |
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  KMC_WF_SUBSTITUTE modify column PROFILE to   type : VARCHAR,len : 84,dec : 0,not null : true,default : | |
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  Action: CONVERT
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  Action: CONVERT
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  Table has to be converted
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  Table has to be converted
    Jul 30, 2011 8:55:13 AM  Info:
    Jul 30, 2011 8:55:13 AM  Info: E R R O R ******* (DbModificationManager)
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Error:  Table KMC_WF_SUBSTITUTE: Conversion currently not possible
    Jul 30, 2011 8:55:13 AM  Info:
    Jul 30, 2011 8:55:13 AM  Info: E R R O R ******* (DbModificationManager)
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Error:  Table KMC_WF_SUBSTITUTE: Conversion currently not possible
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  Next archive object : KMC_WF_TEMPLATES.gdbtable
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  Next archive object : KMC_WF_TEMPLATES.gdbtable
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  <<< Analyze table KMC_WF_TEMPLATES >>>
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  <<< Analyze table KMC_WF_TEMPLATES >>>
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  predefined action is: >>>null<<<
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  predefined action is: >>>null<<<
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  No action required for table
    Jul 30, 2011 8:55:13 AM  Info: 8:55:09 2011-07-30 dbs-Info:  No action required for table
    We have tried to apply note 1442501 but we still get the error.  We have upgrade all our landscape without any issue, of course this issue is in our production system.  If you have any suggestions, that would be great.
    Thanks
    Jean Seguin

    Hi Jean,
    Did you delete the table KMC_WF_SUBSTITUTE from the database directly and retry the update?
    Also try updating only the UWLJWF first after dropping the table, as suggested in the blog:
    http://joeysbasisblog.blogspot.com/2011/04/jspm-error-in-upgrading-uwljwf-to-7017.html
    Regards,
    Srikishan

  • Hi having a problem upgrading SCM 4.1 APO Live Cache

    Hi I am new to SCM and I came into a project that was already started, I am doing a SUM upgrade and its at the upgrade of Live Cache I need to run the report /SAPAPO/OM_LC_UPGRADE_70 and perform all steps in section A. when I try to run the report it comes back "No shared library for the database with ID LCA" I checked LC10 and saw in the Settings that the database is still pointing back to the source system it was copied from. Like I said I walked into this in the middle the they are upgrading from SCM 4.1 to 7.0EHP3 on SQL 2012 and Windows 2012 so they built the 2012 Vm installed the Central services and when they installed the DB it was an attach / detach method and I installed the DB instance. Question should any of the file directories have come with the attach db there are no sapdb in the directories do I just install the live cache and that installs the maxdb and makes the directories /sapdb/ because I see them in the source system? I tried installing the live cache that came with the original system but it had errors.

    Hi All,
    I went ahead with Option 0 and it asked me for Kernel file and i provided the files.
    I checked logs in /sapdb/wrk directory and i see that Installation of SAP livecache finished successfully.
    From LC10 i gave database connection name (LCA) and clicked on live cache monitoring and it comes back with an error
    Name and Server : LCA - XXXXXXX (XXXXX = Server Name)
    DBMRFC Function: DBM_EXECUTE
    Command: dbm_version
    Error: DBM Error
    Return Code : -4
    Errror Message: database instance not found.
    Application Server:  XXXXXX                     ( Windows NT )
      1. Connect. test with "dbmcli db_state"
         Error! Connection failed to node XXXXXXX for database LCA: database instance not found
         External program terminated with exit code 2
      2. Connect. test with command mode "dbmrfc db_state"
         Name and Server     : LCA - XXXXXXX
         DBMRFC Function     : DBM_EXECUTE
         Command             : db_state
         Error               : DBM Error
         Return Code         :         -4
         Error Message       : database instance not found
      3. Connect. test with session mode "dbmrfc db_state"
         Name and Server     : LCA - XXXXXXXX
         DBMRFC Function     : DBM_CONNECT
         Error               : DBM Error
         Return Code         :         -4
         Error Message       : database instance not found
      4. Connect. test with "native SQL"  ( LCA )
         For detailed information, see the developer trace for work process:          1
    From the OS level i gave command dbmcli db_enum and i get OK as reply.
    Can someone please let me know how to resolve this issue.
    Regards,
    Ershad Ahmed.

  • Hi support team, I'm using iphone4, After i upgraded my ios7 i'm facing issues.Need ur help

    Hi support team, I'm using iphone4, After i upgraded my ios7.0.2 i'm facing issues.
    - Unable to view the incoming calls.
    - mobile hanging

    This is not the "support team".  These are user to user forums.  You are not addresssing Apple's "support team" by posting here.
    Which of the troubhleshooting steps listed in the iOS 7 user guide have you tried?  Have you tried a reset?

  • Since upgrading to iOS 7, i have issues with my music player. Looking for a fix

    I have just upgraded to iOS 7 on my 4S and now am having issues with my music.  I have itunes match but also have music on my phone as well.  When I now play music that is on my phone's hard drive, the music just stops playing randomly as if it has lost conection or something.  Does anyone have a fix for this?

    I've also noticed this on my brand new 5s, I was starting to think it was a hardware proplem utill i saw your post.

  • Windows 7 In Place Upgrade Pre-Windows boot and Graphics issue Alienware M17x

    So I'm having multiple issues here.  The first issue surfaced immediately after I removed and reinserted my graphics card.  For reference The computer in question is an Alienware M17XR3 with an AMD 6870m.  Anyhow, The issue I had then was
    that my built in display showed a black screen (would see a quick flicker of what was supposed to be on it when changing display settings but then a black screen) after Windows botted up.  I could use an external monitor with no problem, and safe mode
    or Windows without graphics drivers allowed everything to run normally.  The on screen display also works normally on boot screens or boot disks such as the windows install disk and Hyrens boot CD.  I am assuming my graphics card is shot.  Either
    that or my motherboard.  Input on this is greatly appreciated.  I do intend to upgrade it myself to a 6970m, but I won't have the money until another 1 or 2 paychecks roll around, and I woulld like to be able to use the on-screen display sooner than
    that.
    Anyhow, to ensure that it is a hardware issue, rather than a software issue, I cleaned old drivers then installed drivers I knew were fully functional.  I did this several times with several driver versions.  Nothing yielded any results.  I
    do not wish to do aclean install unless absolutely necessary or at least not until after the weekend, when I will have time to reinstall my 300+programs, games, themes, mods, etc.  I am not opposed to doing this but I need the computer tonight and
    do not have time to do all that before then.  I'll be using it with an external display tonight, so the graphics issue can wait, however, to test with a clean install, I was using Aomei Partition Assistant to break off some free space as a second partition
    on which I could install a second Windows 7 installation for testing purposes.  I have done this multiple times before.  Unfortunatly, on 4.5 hours of sleep and having been up for about 18 hours straight I wasn't thinking and forgot to plug my laptop
    in.  It lost power during the process and the Windows installation is now totally glitched.  I've tried several fixes all to no avail and would prefer to avoid a clean install until after the weekend.
    In Windows XP, I could boot from the install disk and perform a repair install, similar to the Windows 7 upgrade/in place upgrade.  I would like to do this, but seeing as I cannot access the Windows environment, I'm in a bit of a jam.  I could
    run that program again from mini Windows XP (Hyren's Boot CD) I believe and create the second partition and dual boot.  My question is, can I drop the new Windows folder over the old one or do something similar to avoid losing my programs and files?  Thanks

    Hi,
    Based on my knowledge, we cannot just copy the windows folder to make programs work in the new operating system.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Hard Drive Upgrade Leads to Discovery of More Issues

    Okay, I have a MacBook Pro (older, pre-unibody), 2.33 GHz Intel Core 2 Duo, 3GB Ram, and purchased a larger hard drive to install to just get me some more storage inside the case.  I put this drive into a kit that makes it an external, firewire drive, and I connect it to my laptop and head to Disk Utility to Clone the the drive before doing the physical switch.  Cloning fails everytime and I get the "underlying task reported failure on exit" message.  I then try to Verify my current disk and I get "Volume Bit Map needs minor repair," "Invalid volume free block count, (should be 2049516 instead of 2049515), and " the volume in my hard drive needs repaired."  Disc Repair option is not accessible, so I look into performing repair via Terminal or Single-User mode.  I was going to do the "/sbin/fsck -fy" command, but Terminal doesn't seem to want display properly, and I can't start-up in Single-User.  Everytime I try, while holding down Command & S, my attempt is ignored and the system starts up normally in OS.
    I have read several message board posts about related issues and have tried many different suggestions that I have read, or pieced together on my own, but nothing seems to work.  Does anyone have any other ideas that might allow me to clone this drive so I can install it in my MacBook Pro?
    Thanks

    Okay, well, the reason I am trying to clone, and not zero erase everything, is that I do not have all of the programs or OS on discs that I can simply reinstall everything.  If I did, I would do that instead.  In fact, I would prefer that, but at this point, I am hoping to find a suggestion to repair the current drive so that it is clonable.  I'll be upgrading the OS at a later date, but I can't at this time.
    Maybe another option would be to find out how, exactly, I can extract the programs from my old drive, and reinstall them on the new one without cloning.
    I could backup my user files and programs on another drive.  Install the drive and the OS in the laptop, and then reinstall my old programs.  Any tips on how I can move the programs over without the original discs?

  • Upgraded to pro X and having issues with form created in pro 9

    I created a form in LiveCyle using Pro 9, the form was created for an employer who had to buy Pro X so I was upgraded to Pro X.  Here are the issues I am having, This form was the first time I have ever created a form and I have never used Java Script so there is no scripting involved. 
    1) With Pro 9, if I opend the form with adobe instead of LiveCycle I could delete pages.  Now with Pro X I can not however I can delete pages in PDF's that I did not use LiveCycle on.  How do I enable exert, delete, insert, etc....
    2) I was told that with Pro X it was possible to set the form so that when it's emailed back to the employer after being filled out, it could be secure.  I have not been able to figure out how to set that up.  The employer needs to receive the completed PDF as a PDF with the information that was input secure (socials, etc... ).  If I set up an email button the employer receives a list for information and that does not work for them. 
    3) The employer would like to have a few fields that they input in the form then secure them or make them read only so the employee can not modify.  I know how to do it design mode but it prevents them from being able to input the information they want (employee number for example).
    Java Script is totally foreign to me as I am not an IT person I am a novice computer user that is self taught.  If I am going to have to learn this, can anyone suggest a website or book for beginners?
    Thank you for any help you can provide....
    Heather

    Hi Heather,
    There are a few things going on.
    Firstly, forms that are created in LC Designer are fundementally different to native PDF documents. LC Designer forms are known as XFA Forms and are placed in a PDF wrapper, so that they can be opened in Acrobat/Reader. However a lot of the normally editing options (like deleting pages) that you can perform on a native PDF, you cannot do on an XFA Form.
    You can set up the form to be emailed back and there are a number of options. The example here (http://assure.ly/dYQFb4 and http://assure.ly/hM2A5y) looks at the standard Submot by Email button down to custom buttons, depending on the functionality you need/want.
    One of the things you need to bear in mind is that for users with Reader to be ble to submit the form back as a PDF, it first needs to be Reader Enabled. This is something you can do in Acrobat before you send out the form, but there are license restrictions. See here . http://assure.ly/etkFNU.
    You can set up a solution that locks the fields in the form, prior to submission, but you are getting into scripting. There is an example here: http://assure.ly/yDtfsM.
    When it comes to resources... see my recommendations here: http://forums.adobe.com/message/4186925#4186925.
    I hope that helps,
    Niall

Maybe you are looking for