Upgrade to 10.6 from 10.5 Installation keeps failing - why?

Ok I know I'm way behind as far as mac os x versions go but at this time I'm trying to upgrade my 24" imac (MB419LL/A w/ 2gb ram) from Leopard to Snow Leopard. I followed the instructions here Get Your Mac Ready for Snow Leopard by repairing disk permissions, disabling Guest Accounts and backing up with Time Machine to an external hard drive. The installation looked like it was going ok but failed at the very end (Installation Failed came on the screen). There was a button to "try again" (or whatever it says lol) and I did 2 more times with the same result although the failure message came much sooner the 2nd and 3rd times. I used Time Machine to go back to before the install. Now what?
Thanks in advance for you help.

Welcome.
Are you installing in place (i.e. a standard install) Snow Leopard, or did you erase the drive first?
Are you using the retail SL disc
Are you booting from the disc (holding the C key on startup) or installing from the desktop?
TM has it's uses, but a better solution for this situation is to clone the Macintosh HD to a seperate external HD. You then can boot from that clone if needed.

Similar Messages

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing.

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
Any help is much appreciated!
Thank you!

Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.

Adobe premiere cs6 installation keeps failing from cloud

adobe premiere cs6 installation keeps failing from cloud, any ideas?

We can't have any ideas, because you're not telling us anything. What system? What specific error messages do your get? What do the install logs say about the matter?
Mylenium

Lightroom 5 installation keeps failing

Lightroom 5 installation keeps failing.
Solution mentioned here doesn't work, because my default installation language is English. The installation process stops and shows there's an error but doesn't actually show the error message. The system language on my laptop is Russian.
I had a trial installed previously and now need to activate it with my Creative Cloud membership but it's been about two weeks since I purchased it and it still doesn't work!

Hi,
I’m sorry to hear that! Not sure why it worked for me but not for you. I’d like to check the steps you made just to make sure…
What OS or you using?
I removed Lightroom from Creative Cloud. – So there is no error showing.
I downloaded the: Lightroom_5_LS11_win_5_2 from the link.
Unpacked it to the desktop (any folder will do).
Then I navigated to the folder and installed Lightroom_5_LS11_win_5_2.
Re opened CC and clicked install. It then install the 5.3 update.
If you followed all these steps and still have no luck then A, let me know. And B, you may have to wait for Adobe to fix the issue.
I’ll troll the internet for you too.
There are still more things we can try, so don't give up!
I love Lightroom and feel your pain!
Thanks,
Mike

Can't upgrade to CS6 Standard from CS5.5 Premium - Error: Failed CopyDirectory

I just downloaded CS6 Design Standard as an upgrade from CS5.5 Design Premium. The CS5.5 DP software was on another machine with a hard drive that crashed two weeks ago and is unrecoverable. I have all of the necessary serial numbers.
Please help! I need my CS6 installed and ready for my job at an ad agency!
(Here is the ERROR message I receive when I try to install...after entering the serial numbers for both the new CS6 and the old CS5.5 packages)
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW042 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 0 warning(s)
ERROR: Failed CopyDirectory from '/Users/gbostwick/Applications/Adobe/OOBE/PDApp/DECore/DE6/resources/uninstall/Uninstall Product.app' to '/Library/Application Support/Adobe/Uninstall/{19D99776-D832-4EB7-84BD-55C06FD8D44C}.app'
ERROR: DW042: ARP Entry couldn't be created for language : en_US

Hi error dw042,
You can try giving the full permission to the Adobe folder at the below mentioned location
/Library/Application Support/Adobe
To give the permission just go to this location and right click on the Adobe folder -->click on get info--->in the new window under you will find 'Sharing and permission'--->please add your Mac user name to the list and give the read and write permission
For giving the permission you can also check this link
OS X Mavericks: Set permissions
After giving the permission you can try again.
Thanks
Kapil

Help! Tried installing bootcamp, installation keeps failing

So I set up a partition normally and it finished smoothly and restarted the laptop by itself. After that it automatically went into the windows installer and I kept getting an error that says "windows could not collect information for [OSimage] since the specified image file [install.wim] does not exist." After a few tries, I decided to boot back to OSX so i held down the option key and weirdly it only shows the Macintosh HD and Recovery, no Bootcamp HD to be seen. And when I boot from the Macintosh HD it goes back to the installer. I took out the CD and tried doing the same but this time it tells me to put in CD and press any key, and the same problem repeats itself. How do i get back into OS X?

The Option key boot only shows drives and or partitions that are Bootable. The Windows partition created with Boot Camp Assistant is not bootable until Windows is installed on it.
When you say it goes back to the installer are you talking about the Windows installer?
How are you booting from the Macintosh HD? On the screen that comes up with the Option key boot are you selecting the Macintosh HD and then clicking the little arrow below it?
Boot to the Recovery HD and use Disk utility to repair the Macintosh HD. From the Menu bar in the Recovery boot select the Apple logo and then startup disk and make sure you check the Macintosh HD.
If none of that works to get back into OS X then something, You during the install of Windows (Like not selecting the correct partition to install on) or the actual Windows installer fooled with the Mac OS X partition.

I can't install Adobe Flash -installation keeps failing

I run Windows Vista, and have been using Firefox as my browser (current version). In May some time Flash stopped working on Firefox. It works fine on IE8. I have uninstalled Flash and reinstalled it - successful on IE, and uninstalled Firefox and reinstalled it, then tried to install the Flash plugin, all to no avail. When I try to install it manually nothing happens. Is something changed on a security setting that is preventing this? My cookies/pop-ups allow adobe.com on Firefox.
Any help would really be appreciated.

Thanks for your reply. I am the admin account in Vista. I always log in as admin. Is there a setting within admin preventing me from loading the plugin? If so, I have been able to load other plugins without a problem.
I can't install the plugin with Firefox closed. It tries to load on the browser. For example, I get the message that a plugin needs to be installed from the top of my browser window, I click on it, it takes me to the Adobe license page, I accept, and it takes me to a window where the plugin is being loaded. Then a window comes up that says "Completing the Plug-in Finder Service" which says "No Plug-ins were installed, Adobe Flash Player 10.3.181, Failed" I get the Manual Install button, but when use that to go to the Adobe page, and try to install manually, nothing happens - no acceptance of license, nothing.
I have another computer - newer - with Windows 7 - and Flash loaded and runs fine on my Firefox browser on it.
Any other ideas?

Trail installation keep failing

I have a brand new MacBook Air with OSX 10.8.1. I´m trying to install a trial of Photoshop CS6 and Illustrator CS6, and the installation fails with the following error:
The error summary shows this;
Exit Code: 15 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 0 error(s), 0 warning(s) -------------------------------------------------------------------------------------
System Requirements
Can anyone help out?

Creative Suite Cleaner Tool
Run it, try again.
Mylenium

Adobe reader installation keeps failing

Everytime I try to install adobe reader it fails to install.

susannefromqld,
try downloading the offline Adobe Reader installer, and see if that will install successfully when run locally.

Why does logic studio installation keep failing

I have a MacBook Pro spec.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP41.00C1.B03
SMC Version (system):          1.27f3
im trying to install logic studio and it keeps failing

The reason I asked is because I don't understand how you managed to install 9.1.1 on your iMac...
So... out of curiosity, as you didn't actually answer the question... how did you install 9.1.1 on your Mac given the DVD version is 9.0.0?
As to your questions...
You may install Logic Pro 9 from the Logic Studio package legally on one desktop and one laptop you own... as per the Logic Studio license terms and conditions..
However, had you purchased Logic Pro 9 via the App store, rather than via the boxed edition of Logic Studio 2.0..   that licence, is different and allows you to install LP9 on any number of computers you own for your own private use.. using your Apple ID and the purchased tab of the Mac App Store application.
If you feel Apple should have done a better job in notifying you about the requirements of Logic Pro 9 in reference to the 9.1.6 update being needed under Mountain Lion, why don't you contact them and tell them... via the feedback form,
https://www.apple.com/feedback/logic-pro.html
because Apple isn't here in any real sense..... and therefore won't read your comments or respond
This is a User supported community... and we are all users here, trying to assist other users as and when needed... which I guess you were not aware of?
https://discussions.apple.com/docs/DOC-5671
Merry Christmas!

Trying to update CS5 Design Premium, to 15.0.2 but the installation keeps failing. Windows 8.1

This is what I get. Every time.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
Thanks

manually update, http://www.adobe.com/downloads/updates/

Installer keeps failing under Lion

I installed Lion last night. Tonight software update shows three updates pending: "Remote Desktop Client 3.5.1", "iWork Update 6", and "iTunes". I click install, go through the license agreement, it downloads the software, tries to install the software, then tells me theres been an error? Anyone else having this problem? Is there a work around?

J.chung have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to reinstall the Creative Cloud Desktop application? If so can you provide some additional details? What version of Mac OS are you using? Has the Creative Cloud Desktop application been installed on this computer successfully previously? If so what changes have occurred?

Installation keeps getting failed on some CC applications

After performing clean install Mac OS X 10.9 (Mavericks), I tried to install Adobe CC applications back on my Mac couple days ago.
While other CC applications had been installed without a hassel, I find two applications that kept failling to be installed.
Audition CC and Bridge CC are the ones I am having trouble with.
When I try to install it, it fails at 3% or so. (It varies after reboot, but keeps failing.)
After I click "Retry" as the installation keeps failing, the progress bar reaches up to 41%.
Then no matter how many times I click "Retry", installation gets failed instantly.
The error message says: "Installation Failed The download appears corrupted. Please try again after a few minutes.(-60)"
I've tried installing them both on my iMac and MacBook Air, but the same installation failure occurs.
I've tried installing Audition CC and Bridge CC on my MacBook Air at home, but the same installation failure occurs.
I've tried safe boot. I've tried wating couple days. I've tried re-clean install MacOS X. I've tried changing locations. I've tried contacting Chat Support.
The same installation failure occured.
I suspect that the problem is at Adobe's end, but I am not certain.
Is there any workaround for me to install Adobe CC and Bridge CC?
Thanks in advance for your help.

Hi 상욱군,
Please try installing in the root user account and check.

Trouble completing installation upgrade to PP CS5 from DVD.

Trouble completing installation upgrade to PP CS5 from DVD. I am 99% through the installation, but says I need to close safarinotificati to continue. All my applications were closed, including Safari and I've never heard of safarinotificati
Please advise of anyone knows what I can do. The only option in the window is to cancel the installation.

Hi Lanaid,
Welcome to Adobe Forums.
Please open activity monitor and check if there is any entry for safari in there.
If yes, please close the process and then try.
Thanks

OMServer.msi returns error 1603 when trying to upgrade first management server from Operations Manager 2012 SP1 to Operations Manager 2012 R2

Hi All, looking for some assistance with the following issue.
We are attempting to upgrade our Operations Manager 2012 SP1 environment to Operations Manager 2012 R2.
We have completed all the pre-upgrade tasks detailed here
http://technet.microsoft.com/en-us/library/dn249704.aspx
We are then following the guidance detailed here regarding upgrading distributed management groups
http://technet.microsoft.com/en-us/library/dn249721.aspx. The upgrade fails on the first management server with the following screen being displayed.
OMServer.log file is as follows.
=== Verbose logging started: 22/01/2014 10:21:27 Build type: SHIP UNICODE 5.00.9200.00 Calling process: C:\Users\scomaction\AppData\Local\SCOM\Setup\SetupChainerUI.exe ===
MSI (c) (78:34) [10:21:27:040]: Resetting cached policy values
MSI (c) (78:34) [10:21:27:040]: Machine policy value 'Debug' is 0
MSI (c) (78:34) [10:21:27:040]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (c) (78:34) [10:21:27:040]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (78:34) [10:21:27:040]: Grabbed execution mutex.
MSI (c) (78:34) [10:21:27:071]: Cloaking enabled.
MSI (c) (78:34) [10:21:27:071]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (78:34) [10:21:27:071]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:082]: Running installation inside multi-package transaction F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:30) [10:21:27:082]: Grabbed execution mutex.
MSI (s) (D4:A0) [10:21:27:086]: Resetting cached policy values
MSI (s) (D4:A0) [10:21:27:086]: Machine policy value 'Debug' is 0
MSI (s) (D4:A0) [10:21:27:086]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:A0) [10:21:27:175]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (D4:A0) [10:21:27:181]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:190]: SRSetRestorePoint skipped for this transaction.
MSI (s) (D4:A0) [10:21:27:192]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (D4:A0) [10:21:27:200]: File will have security applied from OpCode.
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi' against software restriction policy
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi has a digital signature
MSI (s) (D4:A0) [10:21:27:354]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (D4:A0) [10:21:27:354]: MSCOREE not loaded loading copy from system32
MSI (s) (D4:A0) [10:21:27:360]: End dialog not enabled
MSI (s) (D4:A0) [10:21:27:360]: Original package ==> F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:A0) [10:21:27:360]: Package we're running from ==> C:\Windows\Installer\4b8344.msi
MSI (s) (D4:A0) [10:21:27:371]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:378]: Machine policy value 'TransformsSecure' is 1
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisablePatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:380]: Transforms are not secure.
MSI (s) (D4:A0) [10:21:27:380]: Note: 1: 2205 2: 3: Control
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log'.
MSI (s) (D4:A0) [10:21:27:380]: Command Line: OM_INSTALLDIR=F:\Program Files\Microsoft System Center 2012 R2\Operations Manager SEND_CEIP_REPORTS=0 MU_SETTING=0 ROOT_MANAGEMENT_SERVER_PORT=5723 SC_DB_SERVER=SCOM-XXX-AG SCDATABASENAME=OperationsManager DW_DB_SERVER=SCOM-XXX-AG DWDATABASENAME=OperationsManagerDW REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Users\scomaction\AppData\Local\SCOM\Setup CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=4472
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{58EFE971-58C1-4DBD-A400-A7607A745475}'.
MSI (s) (D4:A0) [10:21:27:380]: Product Code passed to Engine.Initialize: ''
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table before transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table after transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product not registered: beginning first-time install
MSI (s) (D4:A0) [10:21:27:380]: Product {C92727BE-BD12-4140-96A6-276BA4F60AC1} is not managed.
MSI (s) (D4:A0) [10:21:27:380]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (D4:A0) [10:21:27:381]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (D4:A0) [10:21:27:381]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (D4:A0) [10:21:27:381]: Adding new sources is allowed.
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:381]: Package name extracted from package path: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:381]: Package to be registered: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:383]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableMsi' is 1
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (D4:A0) [10:21:27:383]: Running product '{C92727BE-BD12-4140-96A6-276BA4F60AC1}' with elevated privileges: Product is assigned.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding OM_INSTALLDIR property. Its value is 'F:\Program Files\Microsoft System Center 2012 R2\Operations Manager'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding ROOT_MANAGEMENT_SERVER_PORT property. Its value is '5723'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Modifying SC_DB_SERVER property. Its current value is 'OperationsManager'. Its new value: 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DW_DB_SERVER property. Its value is 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DWDATABASENAME property. Its value is 'OperationsManagerDW'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Setup'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4472'.
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (D4:A0) [10:21:27:383]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: TRANSFORMS property is now:
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (D4:A0) [10:21:27:395]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming
MSI (s) (D4:A0) [10:21:27:396]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Favorites
MSI (s) (D4:A0) [10:21:27:398]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (D4:A0) [10:21:27:399]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Documents
MSI (s) (D4:A0) [10:21:27:401]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (D4:A0) [10:21:27:402]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (D4:A0) [10:21:27:404]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (D4:A0) [10:21:27:406]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Local
MSI (s) (D4:A0) [10:21:27:408]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Pictures
MSI (s) (D4:A0) [10:21:27:411]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:413]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:414]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:415]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:417]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (D4:A0) [10:21:27:420]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:421]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:423]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:424]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:426]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Desktop
MSI (s) (D4:A0) [10:21:27:427]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:428]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (D4:A0) [10:21:27:428]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (D4:A0) [10:21:27:433]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\4b8344.msi'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi'.
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: User policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 22/01/2014 10:21:27 ===
MSI (s) (D4:A0) [10:21:27:435]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:436]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (D4:A0) [10:21:27:438]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (D4:A0) [10:21:27:438]: Doing action: INSTALL
Action start 10:21:27: INSTALL.
MSI (s) (D4:A0) [10:21:27:444]: Running ExecuteSequence
MSI (s) (D4:A0) [10:21:27:444]: Doing action: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76
MSI (s) (D4:A0) [10:21:27:447]: PROPERTY CHANGE: Adding SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:448]: Doing action: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76
Action ended 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:450]: PROPERTY CHANGE: Adding System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:450]: Doing action: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6
Action ended 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:452]: PROPERTY CHANGE: Adding WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6.
MSI (s) (D4:A0) [10:21:27:453]: Doing action: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522
Action ended 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6. Return value 1.
MSI (s) (D4:A0) [10:21:27:455]: PROPERTY CHANGE: Adding System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522.
MSI (s) (D4:A0) [10:21:27:456]: Doing action: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522. Return value 1.
MSI (s) (D4:A0) [10:21:27:458]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:458]: Doing action: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:461]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:461]: Doing action: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:463]: PROPERTY CHANGE: Adding WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:463]: Doing action: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:466]: PROPERTY CHANGE: Adding System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:467]: Doing action: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8
Action ended 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:468]: PROPERTY CHANGE: Adding WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8.
MSI (s) (D4:A0) [10:21:27:469]: Doing action: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9
Action ended 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8. Return value 1.
MSI (s) (D4:A0) [10:21:27:471]: PROPERTY CHANGE: Adding WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
MSI (s) (D4:A0) [10:21:27:472]: Doing action: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE
Action ended 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9. Return value 1.
MSI (s) (D4:A0) [10:21:27:474]: PROPERTY CHANGE: Adding WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE.
MSI (s) (D4:A0) [10:21:27:475]: Doing action: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE. Return value 1.
MSI (s) (D4:A0) [10:21:27:477]: PROPERTY CHANGE: Adding ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\'.
Action start 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4:A0) [10:21:27:477]: Doing action: FindRelatedProducts
Action ended 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
Action start 10:21:27: FindRelatedProducts.
MSI (s) (D4:A0) [10:21:27:481]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT_AGENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _SearchOpsMgrShellPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Doing action: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: FindRelatedProducts. Return value 1.
MSI (s) (D4:08) [10:21:27:501]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI847C.tmp, Entrypoint: SetMonadFilePath
MSI (s) (D4:B0) [10:21:27:502]: Generating random cookie.
MSI (s) (D4:B0) [10:21:27:505]: Created Custom Action Server with PID 4964 (0x1364).
MSI (s) (D4:34) [10:21:27:527]: Running as a service.
MSI (s) (D4:34) [10:21:27:529]: Hello, I'm your 64bit Impersonated custom action server.
Action start 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4!DC) [10:21:27:638]: PROPERTY CHANGE: Modifying MONAD_SHELL_PATH property. Its current value is 'Error: Value Never Set. Check the CACore:SetMonadFilePath CA'. Its new value: 'C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe'.
GetRegistyStringValue: Registy key value found.. C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
MSI (s) (D4:A0) [10:21:27:640]: Doing action: _Set_CORECOMPONENTPRESENT
Action ended 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
MSI (s) (D4:A0) [10:21:27:643]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
Action start 10:21:27: _Set_CORECOMPONENTPRESENT.
MSI (s) (D4:A0) [10:21:27:644]: Skipping action: _AbortDowngradeProductAttempt (condition is false)
MSI (s) (D4:A0) [10:21:27:644]: Doing action: _AbortIncompatibleComponents
Action ended 10:21:27: _Set_CORECOMPONENTPRESENT. Return value 1.
Action start 10:21:27: _AbortIncompatibleComponents.
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5044 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1580 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5512 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 4268 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5024 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 6064 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 3396 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 2704 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5568 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5940 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1968 could not be cancelled. Error: 1168
MSI (s) (D4:A0) [10:21:27:652]: Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
Action ended 10:21:27: _AbortIncompatibleComponents. Return value 3.
Action ended 10:21:27: INSTALL. Return value 3.
Property(S): DiskPrompt = Please Insert Disk 1
Property(S): UpgradeCode = {17058653-A628-4C03-8F80-5E2B179ECD55}
Property(S): SCDATABASENAME = OperationsManager
Property(S): SC_DB_SERVER = SCOM-XXX-AG
Property(S): SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): CORECOMPONENTPRESENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): OM_INSTALLDIR = F:\Program Files\Microsoft System Center 2012 R2\Operations Manager
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): Privileged = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): DONOTSKIPDELETESERVICES = 0
Property(S): DONOTSKIPINSTALLSERVICES = 0
Property(S): OM_COMMON_PRODUCT_REGISTRY_PATH = SOFTWARE\Microsoft\System Center Operations Manager
Property(S): OM_COMMON_PRODUCT_RELEASE_REGISTRY_KEY = 12
Property(S): OM_COMMON_PRODUCT_DEFAULT_INSTALL_DIR = System Center Operations Manager
Property(S): NetFxVersion = v2.0.50727
Property(S): IS_OM_SERVER = 1
Property(S): InstallAPMAgent = 1
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): ARPNOREPAIR = 0
Property(S): ARPURLINFOABOUT = http://www.microsoft.com/mom
Property(S): ARPURLUPDATEINFO = http://www.microsoft.com/mom
Property(S): ARPHELPLINK = http://support.microsoft.com
Property(S): MSIRESTARTMANAGERCONTROL = Disable
Property(S): SQL_PORT = 1433
Property(S): DbSizeGood = 1
Property(S): DbFileOptionsGood = 1
Property(S): DbFilesSpaceGood = 1
Property(S): DbNameGood = 1
Property(S): SqlServicesStarted = 1
Property(S): _SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): DialogWizardTitle = System Center 2012 R2 Operations Manager Setup
Property(S): MinimumOSMsg = This product must be installed on Windows Server 2008 R2 or higher.
Property(S): MOMSDKPortDesc = Operations Manager SDK.
Property(S): MOMConnectorPortDesc = Operations Manager Connector Framework.
Property(S): MOMAEMPortDesc = Operations Manager Application Error Monitoring.
Property(S): MOMSQMPortDesc = Operations Manager Customer Experience Improvement Program.
Property(S): MOMHSPortDesc = System Center Management Health Service
Property(S): SCOMV3SP1ProgramName = System Center 2012 R2 Operations Manager
Property(S): FWRulePingRequestName = Operations Manager Ping Request (Echo Request - ICMPv4 OUT)
Property(S): FWRulePingRequestDesc = Operations Manager network monitoring ping request
Property(S): FWRulePingResponseName = Operations Manager Ping Response (Echo Response - ICMPv4 IN)
Property(S): FWRulePingResponseDesc = Operations Manager network monitoring ping response
Property(S): FWRuleSnmpRequestName = Operations Manager SNMP Request
Property(S): FWRuleSnmpRequestDesc = Operations Manager network monitoring SNMP request
Property(S): FWRuleSnmpResponseName = Operations Manager SNMP Response
Property(S): FWRuleSnmpResponseDesc = Operations Manager network monitoring SNMP response
Property(S): FWRuleSnmpTrapListenerName = Operations Manager SNMP Trap Listener
Property(S): FWRuleSnmpTrapListenerDesc = Operations Manager network monitoring SNMP trap listener
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {C92727BE-BD12-4140-96A6-276BA4F60AC1}
Property(S): ProductLanguage = 1033
Property(S): ProductName = System Center Operations Manager 2012 Server
Property(S): ProductVersion = 7.1.10226.0
Property(S): SecureCustomProperties = ACTIONSPASSWORD;CORECOMPONENTPRESENT_AGENT;CORECOMPONENTPRESENT_GW;CORECOMPONENTPRESENT_RC;CORECOMPONENTPRESENT_SCE;CORECOMPONENTPRESENT_SMB2;CORECOMPONENTPRESENT_SMRTM;IS_AVICODE_AGENT_INSTALLED;IS_MOMASPAGENT_INSTALLED;MOM_DB_SERVER;MOMDATABASENAME_OLD;OM_NEWER_PRODUCT_FOUND;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650;SQL_PORT
Property(S): MsiHiddenProperties = _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;_SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;ACTIONSPASSWORD;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650
Property(S): WixPdbPath = d:\btvsts\20867\private\product\setup\wix\msi\server\om\obj\amd64\OMServer.wixpdb
Property(S): CORECOMPONENTPRESENT_AGENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): MONAD_SHELL_PATH = C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Property(S): EnableEV.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = 1
Property(S): AddInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = add
Property(S): RemoveInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = remove
Property(S): WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE = C:\Windows\
Property(S): VersionNT = 602
Property(S): DW_DB_SERVER = SCOM-XXX-AG
Property(S): DWDATABASENAME = OperationsManagerDW
Property(S): OMDATABASENAME = OperationsManger
Property(S): MaximumDataAgeMinutes = 10080
Property(S): MaximumQueueSizeKB = 102400
Property(S): MOMSDKPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 5724
Property(S): MOMConnectorPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51905
Property(S): MOMAEMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51906
Property(S): MOMSQMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51907
Property(S): SDK_SERVICE_TYPE = 4
Property(S): ROOT_MANAGEMENT_SERVER_PORT = 5723
Property(S): SERVER_MANAGEMENT_GROUP_TYPE.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = 1
Property(S): MaximumForwardedVirtualQueuePercentage = 8
Property(S): QueueSendDataSinglePriority = 0
Property(S): ADMIN_ROLE_GROUP.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = Administrators
Property(S): USE_MANUALLY_SPECIFIED_SETTINGS = 1
Property(S): WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 = C:\Windows\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): CAN_REGISTER_FOR_MU = 0
Property(S): MU_SETTING = 0
Property(S): IS_ROOT_HEALTH_SERVICE = 0
Property(S): IS_MOM_SERVER = 0
Property(S): IS_MOM_GATEWAY = 0
Property(S): WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 = C:\Windows\
Property(S): WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\
Property(S): System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\system32\
Property(S): DirectoryTable100_amd64.1C11561A_11CB_36A7_8A47_D7A042055FA7 = DirectoryTable
Property(S): WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\
Property(S): SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\SysWOW64\
Property(S): DirectoryTable100_x86.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = DirectoryTable
Property(S): SEND_CEIP_REPORTS = 0
Property(S): System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 = C:\Windows\system32\
Property(S): ACS_AGENT_ACCOUNT.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 =
Property(S): WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 = C:\Windows\
Property(S): SC_COMMON_REGISTRY_PATH = SOFTWARE\Microsoft\System Center\2010\Common
Property(S): DISCOVERY_DATA_AUTHORIZATION_ENABLED = 0
Property(S): IcmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): IcmpRequestType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 8:*
Property(S): IcmpResponseType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0:*
Property(S): SnmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 17
Property(S): SnmpPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 161
Property(S): SnmpTrapPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 162
Property(S): DirectionIn.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0
Property(S): DirectionOut.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\SysWOW64\
Property(S): System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\system32\
Property(S): ADVISOR_UPLOADFREQUENCY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_UPLOADDAY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEHOUR_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEMIN_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_MAXCACHESIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_MAXMAILBOXSIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_ARCHIVEPERIOD_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #5
Property(S): ADVISOR_LOGLEVEL_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #3
Property(S): ADVISOR_NEEDMPINITIALIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_LYNC_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): ADVISOR_SHAREPOINT_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): MsiLogFileLocation = C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log
Property(S): PackageCode = {58EFE971-58C1-4DBD-A400-A7607A745475}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Users\scomaction\AppData\Local\SCOM\Setup
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 4472
Property(S): MsiSystemRebootPending = 1
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 602
Property(S): WindowsBuild = 9200
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\SCOMAC~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): AppDataFolder = C:\Users\scomaction\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\scomaction\Favorites\
Property(S): NetHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\scomaction\Documents\
Property(S): PrintHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\scomaction\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\scomaction\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 7854
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = scomaction
Property(S): UserSID = S-1-5-21-607126847-70518424-489426498-210484
Property(S): UserLanguageID = 2057
Property(S): ComputerName = SCOMMS1-VM
Property(S): SystemLanguageID = 2057
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 10:21:27
Property(S): Date = 22/01/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.17929
Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\4b8344.msi
Property(S): OriginalDatabase = F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (D4:A0) [10:21:27:697]: Note: 1: 1708
MSI (s) (D4:A0) [10:21:27:698]: Product: System Center Operations Manager 2012 Server -- Installation operation failed.
MSI (s) (D4:A0) [10:21:27:698]: Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (D4:A0) [10:21:27:744]: Deferring clean up of packages/files, if any exist
MSI (s) (D4:A0) [10:21:27:744]: MainEngineThread is returning 1603
MSI (s) (D4:30) [10:21:27:744]: No System Restore sequence number for this installation.
=== Logging stopped: 22/01/2014 10:21:27 ===
MSI (s) (D4:30) [10:21:27:746]: User policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D4:30) [10:21:27:747]: Destroying RemoteAPI object.
MSI (s) (D4:B0) [10:21:27:747]: Custom Action Manager thread ending.
MSI (c) (78:34) [10:21:27:748]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:34) [10:21:27:749]: MainEngineThread is returning 1603
=== Verbose logging stopped: 22/01/2014 10:21:27 ===
Any assistance anyone can provide will be greatly appreciated.

Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Upgrade to 10.6 from 10.5 Installation keeps failing - why?

Similar Messages

Maybe you are looking for