Upgrade to Lion and no way to open finder

After Lion upgrade, I can not open any folder or searching through finder... i click on a folder of my desktop and it disappears. I can only see for few seconds moving from one screen to another in Expose mode, but no way to click on it. I see the list of opened folders from the main menu "window", but also there, no way to visualize them... please please please help me!

After Lion upgrade, I can not open any folder or searching through finder... i click on a folder of my desktop and it disappears. I can only see for few seconds moving from one screen to another in Expose mode, but no way to click on it. I see the list of opened folders from the main menu "window", but also there, no way to visualize them... please please please help me!

Similar Messages

  • Upgraded to Lion and Safari won't open.  I have completed all available software upgrades, reset the macbook several times, no luck.  Any suggestions?

    I'm using a 2008 macbook 10.7.4 operating system.
    I had purchased lion a while ago but had to wait for a fast internet connection to download and install.
    I did that today and now safari won't open.
    I have reported the issue as it does automatically.
    But obviously I would love to have a solution to the problem.
    I do have time machine and completed a back-up just before upgrading to Lion - so if I have to I can reverse back to snow leopard, but that's a last resort.
    Any solutions or work-arounds for this?  I can't seem to find any other solutions from the blogs.

    Before anything else...try...
    Quit Safari.
    Go to ~/Library/Preferences
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
    Relaunch Safari. If that helped, move the.plist file to the Trash. If not, move it back to the Preferences folder.
    ~ (Tilde) character represents the Home folder

  • I've just upgraded to Lion and finder no longer shows how much free disk space I have left

    Hi I've just upgraded to Lion and when im now in finder i can no longer see how much free or used hard disk space i have. anyone know how to turn this back on?

    Hi Alan,
    I think you are looking for this:
    From the Finder, select View > Show Status Bar and like magic, your info is revealed like how it was with snow leopard at the bottom of the finder window.
    If you have the finder window at the bottom of your screen then it might be below the screen, just move the window up. That happened for me when I revealed it.
    Hope this helps.
    /svenskdod

  • I upgraded to Lion and now my iPhoto won't open and I don't know where my pictures are

    I upgraded to Lion and now i don't have Iphoto anymore.  Where did all of my pictures go??

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • I have an iMac purchased new about 5 years ago with OS 10.4.11. I would like to upgrade to Lion. I currently have a 2.33 GHz Intel Core 2 Duo processor with 2 GB of ram. Can I upgrade to Lion, and what is the best way to do so?

    I have an iMac purchased new about 5 years ago with OS 10.4.11. I would like to upgrade to Lion. I currently have a 2.33 GHz Intel Core 2 Duo processor with 2 GB of ram. Can I upgrade to Lion, and what is the best way to do so?

    From what I read here:
    http://www.tuaw.com/2011/06/06/lion-...u-2-gb-of-ram/
    s long as they already have Snow Leopard 10.6.8 installed in it.All a person needs to do with that type of iMac is to upgrade/max out their Ram. They claim that an Interl iMac with Core 2 Duo is all that is needed, as long as it has OS 10.6.8 installed. They say you don`t need  the "Core i3, Core i5, Core i7, or Xeon processor"
    But I wonder about the RAM speed, the iMac 2.33Ghz uses DDR2 SDRAM,  which I believe is rated at 667Mhz. Lion maybe installed but it might be problems running smoothly or not?
    Did some quick checking and the iMacs apple is selling this year use 1333MHz DDR3 SDRAM.
    The only thing to do is to make sure you have a good back-up, Install your RAM and install Snow Leo, then wait a couple of hours and install Lion.
    Good Luck

  • Upgraded to lion  and now songs and books bought on my Mac will not open on my  iPad...songs are " waiting" forever and books will not open when seleted. PLease help...Thanks!

    Upgraded to lion and now songs and books bought on my Mac will not open on my iPad....songs are " waiting" forever and books will not open when
    selected. Thanks for any help anyone might be able to provide.

    Upgraded to lion and now songs and books bought on my Mac will not open on my iPad....songs are " waiting" forever and books will not open when
    selected. Thanks for any help anyone might be able to provide.

  • I upgrade to Lion and now my Mail does not open, who can help me out?!

    I upgrade to Lion and now my Mail does not open, who can help me out?!

    I cannot get to the mail menu bar.  When I try to open mail, I get "you can't use this version of mail with this version of Mac OS X.  But the help suggestions don't work either.  I am trying to download an update combo v1.1 to see if that helps. Thanks

  • I recently upgraded to Lion and I had Adobe InDesign which is no longer supported. Problem is, I have several files I need but cannot open because it was PowerPC based. What do I need to do? Thanks in advance!

    I recently upgraded to Lion and I had Adobe InDesign which is no longer supported. Problem is, I have several files I need but cannot open because it was PowerPC based. What do I need to do? Thanks in advance!

    Assuming you registered your older version, you can retrieve the serial number by going to Adobe's site and go into your account. On this page, click the My products link in the right hand column of the first three. You'll be asked to enter your user account name and password. Once in, a list of all software you've purchased will be shown, along with their serial numbers.
    That said, it really won't help you much. A PowerPC only version of InDesign means it's no newer than the original CS version, and won't be worth a cent towards an upgrade discount. To get CS6, you'd have to pay full price again.

  • I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

    I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

    Hi Pete. The repair of disk permissions can help resolve  any application crashing or misbehaving.
    As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
    Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
    So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
    As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

  • I just upgraded to Lion and want to go back to Snow Leopard ..I have time machine..is there a way?

    I just upgraded to Lion and Quicken will not work and not sure if I want to go back to Snow Leopard.  I have a timemachine and would like to know if someone could help to either get quicken working or how I can get back to snow leopard?

    Did you check the Quicken website before upgrading your Mac? It specifically says that Quicken will not work on Lion.
    http://quicken.intuit.com/support/help/install--register--and-convert/quicken-fo r-mac-compatibility-with-mac-osx-10-7-lion/GEN83208.html
    Just reinstall Snow Leopard. Should work fine. You can downgrade to previous software as long as the Mac supports the earlier version. If it previously had Snow Leopard, then re-installing is fine.
    However!!! If you have a newer computer that was "born with" Lion, you cannot downgrade, as the firmware will not be compatible.
    Good Luck!

  • I have upgraded to Lion, and want to upgrade my iPhoto 8.1.2, but when I try it says it was not purchased at a MAC Apple store, which it was.  Then it asks if I want to buy 9.2.3, and I say yes. It responds with Product Distribution file can't be verified

    I have upgraded to Lion, and want to upgrade my iPhoto 8.1.2, but when I try it says it was not purchased at a MAC Apple store, which it was.  Then it asks if I want to buy 9.2.3, and I say yes. It responds with Product Distribution file can't be verified. Maybe damaged or not signed.  How do I get this fixed, so I can download the new iphoto's that are available.

    How did you move your iPhoto library to the new system?  the recommended way is Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • Upgrade to Lion and use I Cloud without Mobile Me account

    I have an I Mac running on Mac OS X 10.5.8 I want to use I Cloud and also upgrade to Lion but I did not open a MobileMe account.
    What is the best way to upgrade?

    Backup first
    It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
    Erase before the install
    Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
    During the install
    Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
    OS numbers and names
    OS X 10.4.x - Tiger
    OS X 10.5.x - Leopard
    OS X 10.6.x - Snow Leopard
    OS X 10.7.x - Lion
    OS X 10.8.x - Mountain Lion
    More about Macs
    The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
    Upgrade to Leopard
    Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
    Upgrade beyond Leopard
    OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
    Upgrade beyond Snow Leopard
    Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
    Important
    Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

  • I recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in notebook trying to record.

    i recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
    Also, I feel that it overheats often and my battery runs out pretty quickly.  I had the macbook (black) and this never happened before.  I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

    This is exactly what keeps happening to mine too.  I was at a conference taking notes, and I was
    using the Notebook template, and doing some audio recording simultaneously.  About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working.  However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it). 
    Does the crash happen to you under similar cirucumstances?  The update might help a little, but it is definitely not the solution.  Does anyone have any solutions?  Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

  • Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

    Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

    I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

  • Issues with upgrade to Lion and iWeb '08

    I upgraded to Lion and now my iWeb '08 will not open. I cannot even find my domain file. Please help! I'm a teacher and my whole class is on this thing.

    The domain file used to be located by default in your Users/Home/Library/Application Support/iWeb folder. 
    In Lion the Finder folder is now invisible.  To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button.
    Once you make the library visible check to see if your domain file is located there.  Then try to open it by double clicking on it.
    OT

Maybe you are looking for

  • What is the open purchage order

    ·     Developed a report that displays open purchase order.

  • How to get the changed data of an order?

    Hi, I'm trying to use BADI ORDER_SAVE to check if the user has changed the status and based on some conditions, I want to avoid saving the order. My problem is that with function moule CRM_READ_ORDER I can only read the "old" (current) information fr

  • Time machine restore from dead hard disc

    I have a client with a 2007 iMac. The hard disc failed. I have a time machine backup, and need to restore to a new hard disc. Do we need to re-install 10.8, and then restore from timemachine, or can we boot the machine and do a restore? What is the q

  • Adobe Elements 6 will not load

    Several times I have installed, then uninstalled this program for the same reason, namely, it will not load. For a few times after the reinstall, it works okay, then stops. I have gone into "Services" and restarted the "active file monitor" but it do

  • Elements 9 Screen size

    Just purchased Elements 9 to upgrade from Elements 5. I am very unhappy that the new screen devotes so much of the real estate to the "Project Bin" area and the "Panels" sidebar.  In Elements 5 there was no Project bin and the sidebar could be elemen