Upgrade to SRM 7.0 Additional fields on 'SOS' of SC

Hello All,
We have Upgrading the SRM system to 7.0. and we ahve one requirement to add few fields on Source Of Supplier' of shopping cart also we need to transfer this data from SRm to ECC system.
I did following changes till now,
Added new fields in following path of SPRO:
1. Under Configure control fields --> Define customer fields on Item level --> Append for Customer Fields on Shopping Cart Item
2. Under Configure control fields --> Define customer fields on Item level --> Append for Customer Cross-Document Item Database Fields
3. Under Configure field control --> Configure control for Fields on Item Level --> Default Metadata for Fields in Items that do not (yet) Exist --> Added new fields for OBj Type BUS2121 (SC) and BUS2201 (PO)
Changes in Webdynpro:
Webdynpro: /SAPSRM/WDC_DODC_SC_I_SOS
View: V_DODC_SC_I_VENDOR
1. Created new enhancement
2. New fields added under context SUP--> ITEM_BASIC_DATA where as type for each field refered to structure /SAPSRM/S_CLL_WD_SC_I_BD
3. Added fields in Layout
4. bind these layout fields to new context elements
Problem:
I'm able to view these fields on SRm 'SOS' screen, when I enter vallues in these fields and click on any other Tab values are not retained and get refreshed. That is all values are set to BLANK value.
Is there any step which I'm missing?
I have searched lot of forums for this, and followed above steps but no sucess.
Please help me to resolve this ASAP.
Thanks in advance.
Regards,
Yogesh

Hello Devi Prasad,
Thanks for reply!
I checked the given method in debug mode.
This method is getting called before assiging supplier. I can see that all custom fields are available in the internal table at the time of debug.
Now the process is, when I enter any supplier between range 000-999 and click on asisgn supplier button, my custom fields will appear on the SOS tab. Now when I enter any value in these fields and click on any other Tab or Order the shopping cart all custom fields value get cleared and does not store values in it.
My requirement is to hold these values in custom fields till I order the shopiing cart and after Order these values should be stored in the database.
Regards,
Yogesh

Similar Messages

Custom fields in webdynpro SRM 7.0 while upgrade from SRM 5.0

Hi Experts,
We are upgrading from SRM 5.0 to 7.0. We created 2 custom fields using configure field control in Meta data handling (SPRO) and enabled them for visibility. When we tried to see these two custom fields, they didnt appear in the web dynpro component.
Web dynpro details are below.
Webdynpro: /SAPSRM/WDC_UI_DO_ACC
Window : IV_L_FPC_CA_DETAILS
view : V_DO_ACCOUNT_DETAIL
Field : zzXXXX
We have to manipulate the data of those fields.
Since we couldn't see those fields, unable access the data. Could you pls suggest what was the solution you found for your issue.
Thanks
Dhivya

Hi,
Please check the Meta configuration on which set key you configured.
you have to configure the fields as show in the below link for accounting.You have to use set key as 31 for accounting.
http://wiki.sdn.sap.com/wiki/display/SRM/CustomerAccountFieldsatDefaultsettingsonShoppingCart
Regards
Devi prasad

Additional field for Material Master of SRM

Hi,
We want to add 3 additional fields to the product master table of SRM. We do not want to use these additional fields on any documents (neither SC nor PO nor contracts etc). We do not want to display these additional fields on Enterprise Buyer screens.
What we want is, after adding these fields to the products table we want to edit the values on COMMPR01. Is it possible to see and edit these additional fields with txn COMMPR01? If not how can we edit these fields?
Thanks
PS: the fields that we want add are: New category name (other than the EBP category), New material code (other than the regular material number), Country Name (we have 2 backend systems, we want to keep the name of the country of the backend).

Hi,
How can I do that?
I have 2 fields to reply to COMMPR01:
MARA-ZZCOD_CORP (Customer Field)
MARC-EKGRP
Any ideia to reply this with standard process?
Thanks,
Pedro

Pictures not appearing in after upgrade to SRM-MDM Catalog 3.0 SP7 Patch4

Hello,
Due to some issues in Advanced search we performed the service pack upgrade from SRM-MDM Catalog 3.0 SP5 (with MDM 7.1.03.72) to SRM-MDM Catalog 3.0 SP7 Patch4 ( MDM 7.1.04.146). With this new SP, the Pictures are not appearing anymore under the Hyperlink section anwhere in Catalog browser( Compare, Context view, Item details). With earlier SP pictures were appearing perfectly.
We have done like this:( refer earlier thread - Re: SRM MDM Catalog 3.0 Image display) thanks Sudhanshu, Jitesh and Mandeep for suggesting that solution!
Using the hyperlink field
type : rendered
MIME type : image type i.e. .jpg
URL : web URL
We had gone for this option because we dont want to store impages in MDM, and this worked perfoectly until new SP upgrade.
Any clues?
Thanks
Pravin

Hi Bala,
Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink as type-Rendered, MIME type as JPG and a valid URL.
I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
Here are the notes for reference of others who get into same issue.
Note 1450593 - Implementation of BlobCache
This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade, I would like to know if there is a workaround.
Thanks
Pravin

Q & A for blueprint upgrade to SRM server 5.0

All,
As we are going for upgrade from EBP 2.0 to SRM 5.0 and we have go for blue printing. If any body is having Questionare contains technical and general business questions in this scenario please post such a questions from Q&A db. The client is working on classic scenario. If anyone went for such an upgrade, please provide me some inputs in this regard.
Thank you,
Manyam

HI manyam
following post may be usefuls
G/L account field to be disabled for SC screen
Help needed in SRM upgrade to SRM server 5.0
Hope this provides valuable information.
Regards,
Nimish Sheth
Do reward points for helpful answers.

Additional fields in RFPOSXEXT

Hi
We are upgrading 4.6c to ECC 6.0.
In Ecc 6.0 has additional fields in structure RFPOSXEXT. This structure is automatically generated.
How to remove the extra fields in this structure.
Thanks

Hi,
in order to regenerate the structure RFPOSXEXT you have to run the standard report RFPOSXEXTEND,
Program RFPOSXEXTEND combines structure RFPOSXEXT from the fields of structure RFPOSX and the special fields saved in table T021S together and activates them in the Data Dictionary.
If you want to remove some special fields from the structure RFPOSXEXT you have to manage them in Financial Accounting customizing (Define Special Fields for Line Item Display) in the views V_T021S and V_FAGL_T021S.
Please read the correspondings IMG activities documentation and the abap documentation of RFPOSXEXTEND.
Kind regards.
Andrea

Extend shoping cart item overview with one additional field in approvals

Hey there,
I don't find any BADI for extending the SC item overview table with
one additional field in the approvals area of srm.
is there a way to do this without modifications ?
best regards,
Sven

I went through the document on the mentioned by you.
But my requirement is a bit diiferent.
I want to have 3 different drop downs with a numeric field attached to them.The sum of these numeric fields should always be 100 (two values are manually selected but the third value should be calculated automatically based on the previously selected values).
Example,
I select 10 as a value for Drop down 1, 40 for drop down2 then for the drop down3 the value should populate automatically as 50 (100 - (10+40)).i.e. the sum being 100.
Can you or any one please help me with this.
Also I am not sure how do we give multiple options for selection (like 10,20,..50 etc upto 100) for a drop down.

SRM 7.0 Custom Fields for Shopping Cart Item

Hi
We are upgrading from SRM 4.0 to 7.0. Can you please help how to migrate the custom fields logic. We created fields in following shopping cart structure INCL_EEW_PD_ITEM_CST_SC and INCL_EEW_PD_ITEM_CST during upgrade. IncludesINCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF already have fields from SRM 4.0 Implementation. In SRM 4.0 BADI BBP_CUF_BADI_2 was used to populate values. In SRM 7.0 we tried to use Enhancement Spot /SAPSRM/BD_PDO_FIELD_EXTENSN that has BADI's /SAPSRM/BD_PDO_FE_FILL_HEADER and /SAPSRM/BD_PDO_FE_FILL_ITEM in it. During shop transaction these BADI's are not getting triggered. Is this the right way of populating data or do we need to use Webdynpro Enhancement concepts of custom views to populate custom fields .
Thanks in Advance.

I have the same problem that Dhivya Baskaran
The window is:
dynpro: / SAPSRM/WDCC_FPM_DO_SOCO_GAF_3
Window: IV_L_FPC_GAF_CA
View: V_AO_SOCO_GAF_3
I need to add a customer field in the header and I know the parameterization it is for this screen
anyone can help me?
thank you very much

E-Recruiting Addition field to Infotype 5107

I'm implementing E-Recruiting for a client.
I added the additional field to infotype 5107 Desired Work Location using PPCI. I also created a custom table for Desired Work Location to store the value of Location (county, institution & etc.). When I added the new field to the infotype 5107 it automatically shows up on the Desired Work Location of E-Recruiting page as a text field. I found the bsp for this page it's desLocn_detail.bsp. Also I have to set two field that are already on the page Country and State to a default value. Both are drop down list.
Here's my question:
1.I would like to make the new field list box i think that's what it is called, where the candidates can select multiple locations. How & where can i do this? And how can i link the value from the custom table that i created to the new field that I added to Infotype 5107 to appear on the list box?
2.How and where can I set Country and State field to the a default value? Is this done in the IMG?
3.I'm assuming the deslocn_detail.bsp is a SAP standard BSP. should I modified this bsp to rendered what I'm supposed to do? If i modified this page when the upgrade/service pack is applys my modification will be wiped out?
any suggestion will be helpful.

I think you should take the following approach:
The only sane way to keep multiple values in a single database record that comes to my mind id to create a new table to keep the selections.
It's key should be the same as of the HRP5107 table plus a sequential number for counting selections.
There are further 3 things to consider:
1. Filling up the table before display with current selection.
2. Handlig user selection after submit.
3. Hiding the text field from user input.
ad 1.
I havn't used <htmlb:listbox> before, so I might wrong somewhere, but i guess that you should prepere two tables and pass them to table and selection attributes.
Probably it would be best to store them as attributes of the controller to provide easy access from the bsp.
The proper place to fill these structures is the DO_REQUEST method, probably near the end of the method when all standard stuff is done.
In this method you should read the configuration of available loactions and put it in the 'table' attribute,
and read the table of selections and put them in the 'selection attribute'.
ad 2. The place to handle input is the DO_HANDLE_DATA in the controller. As i've said a haven't used listbox, but probably the are multiple fields with the id of the listbox, each containing a selected item.
You should read them here and place them in the 'table' attribute.
Next you have change the on_save method in the controller (Actually it might be in a parent controller - i haven't checked it).
In there you should insert the values in the 'table' attribute to the custom table with selections (probably you have to delete all entries for the current infotype record first)
ad. 3
Now that i wrote 1 and 2 i see that you can just remove the field from the infotype...
Hope this helps.

SRM Upgrade from SRM 4.0

Does anyone have any good incite on upgrading from SRM 4.0 to SRM 5.0 possibly(6.0)? We are preparing to upgrade to ECC 6.0 and I want to know for:
1 - Is an SRM upgrade absolutely required if we are currently on 4.0?
2 - What are the possible benefits/pitfalls of the upgrade in both SRM 5.0 and 6.0?
Your wisdom is greatly appreciated!
Points will be rightfully rewarded!
Charles

Hi,
See the foll links:
SRM 6.0 update
https://websmp101.sap-ag.de/~sapidb/011000358700006330942006D
Since SRM 6.0 is quite new, and will be officially released after some time, you need to read the release notes in order to find the exact differences in terms of enhancements from the above link.
Refer to this OSS Note as well.
Note 995220 - SRM 6.0 SP Stack 00 (12/2006): Release Information Note
You can check next link:
https://websmp110.sap-ag.de/srm
Re: Additional advantages of having SRM in EBP 5.0 compared to EBP 2.0
In EBP 5.0, you have more flexibility in case of the WF's.e.g. in the SC Approval WF's ,you can have the n-step dynamic header level as well as the Item level approval Workflow in addition to the Standard 1 step,2 step and no approval Workflows
BR,
Disha.
Pls reward points for helpful answers.

Dependencies for an upgrade from SRM 4.0 to SRM 7.0

We have a Client situation - upgrade from SRM 4.0 to SRM 7.0 - they have SAP EP 6.2 and 4.7E backend system.
Now, the questions are -
1. Is it mandatory to upgrade to SAP EP 7.01 (Netweaver 2004s) or will SRM 7.0 work with SAP EP 6.2?
2. It appears SRM 7.0 will work with SAP 4.7E, however, will self-service procurement, sourcing cockpit functionality work okay and integrate with SAP 4.7E without any issues?
An early response is highly appreciated.
SNR

Hi SNR
For your first question please refer to the following link as well as the SRM 7.0 release notes:
https://wiki.sdn.sap.com/wiki/display/SRM/SRMRelatedComponentsperSP+Stack
If you check the EP 6.2 is no longer supported by SRM 5 releases onwards
Based on this information, the SRM 7.0 should not work with EP 6.2
For your Second Question:
It seems to be no restrictions in use Backend 4.7E. You can define it in the SPRO as backend destination / sys type(BBP_BACKEND_DEST table SYS_TYPE = R/3_4.70)
As additional information please kindly refer to the SRM 7.0 Instalation Guides. It can be found in the Service Marketplace
service.sap.com/srm-inst
-> SRM 7.0
There you will find a lot information about installation / upgrade from prior SRM releases
I hope this information helps!
Alvaro

Help needed in SRM upgrade to SRM server 5.0

Experts,
My client is on EBP 2.0 and going for an upgrade to SRM Server 5.0 and working on classic scenario and keeping the backend as 4.6C for this phase of the project. Please share any experiences on how to go about the upgrade, any questionaries, methodologies also I would like to know the major differences between EBP 2.0 and SRM 5.0.
Thanks in Advance,
Surya

HI Surya
Pls go through following sites
http://service.sap.com/instguides (install and upgrade guides)
http://service.sap.com/ibc-srm (config guides - upto SRM 4.0)
http://service.sap.com/srm (general info)
The installation guides and Config guides will give you perfect steps to follow for installation and configuration.
regards,
Nimish Sheth

Additional field in adhoc query

Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything. Has anyone coded an additional field that will look at the latest record regardless of the date?
If you have, please can you share the code with me!?
Many thanks!

Hi Tanya ,
Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
data l_it_p0105 type standard table of p0105.
clear: l_it_p0105, z105_last.
call function 'HR_READ_SUBTYPE'
exporting
    tclas                 = 'A'
    pernr                 = peras-pernr
    infty                 = '0105'
    subty                 = '0001'
    begda                 = '18000101'
    endda                 = pn-endda
tables
    infty_tab             = l_it_p0105
exceptions
    others                = 1.
if sy-subrc = 0.
describe table l_it_p0105.
read table l_it_p0105 into z105_last index sy-tfill.
endif.
Regards,
Sergey

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

Upgrade to SRM 7.0 Additional fields on 'SOS' of SC

Similar Messages

Maybe you are looking for