Upgrade Workbooks and querys to 7.0
Hi experts,
I have the following question:
I upgrade all 3.x querys to 7.0 in the system. After it I upgrade all workbooks to 7.0 version. Will the upgraded workbooks contain the upgraded querys or only the old version of querys?
Thanks in advance for your answers.
Hi,
If you Open the 3.x Query using 7.x Query Designer then the Query will be upgraded into 7.x.But if you open a 3.x Workbook in 7.x BEx Analyzer,then it will prompt you to upgrade the workbook,but the embedded query will be still in 3.x.To upgrade the Query to 7.x,it must be opened with 7.x QD.Just opening the 3.x workbook(which has 3.x query embedded) with 7.x Analyzer will not upgrade the 3.x Query.
Rgds,
Murali
Similar Messages
-
Hi!
We are currently in the middle of upgrading to NW2004s from 3.5. So far, we have completed a test upgrade on the development system.
When opening workbooks, we can see that the query and workbook objects being upgraded on the fly, which decrease performance. To avoid this we have to resave the workbook, in order to convert all objects.
So my questions are:
1) Does anyone know if it.s both the workbook and the query that has to be resaved?
2) Which upgrade strategy has been used when it comes to migrating workbook and queries?
To let the end-users access via the 3.5 add-ins to start with
*To resave all the queries and/or workbooks after been upgraded
To let the end-user resave when appropriate
Or any other methods?
Thanks in advance!
BjørnHello,
I thought I would share our experience with workbook conversion issues so far. We are upgrading the toolset after having done the technical upgrade, implemented new analysis authorizations, and implemented support packs up to 12.
In our area we have a set of reports (workbooks)that are formatted to a very high degree, using Excel more than the BEx (3.5) settings, although we have both. Some examples are 1) in general the column widths and texts have to remain static to retain the proportions of the report and for printing, and 2) we redid BEx Exception cell formatting with Excel Conditional cell formatting since the users wanted blue as a condition (this is what we did, maybe there is a better way...), 3) graphs, print settings etc.
In order to make some of these settings in 3.5 we had to turn off the query property "adjust format after refresh". I believe the same setting in 7.0 is "Adjust formatting" checkbox on the Analysis Grid properties. Another setting we used extesively in 3.5 was the query setting "adjust column width on refresh - set to "do not adjust". In 7.0 the equivalent is also on the Analysis grid properties "Auto Fit".
My thought right now is that the "Adjust formatting" is not carrying over during the upgrade process, in other words turning off "adjust format after refresh" seems to convert to having the " Adjust formatting" checkbox checked, which wipes out everything after refresh, including the standard BEx format. I have come up with a way to manually convert them, but ultimately involves a fair amount of rework. Many of our other users create workbooks and queries in an adhoc process, so we are communicating to them that they will need to go through this process, and there may be rework. We are finding the 3.5 vs. 7.0 workbook creation process to be significantly different which was unexpected for us at least.
Hope that experience might be helpful, we are still working on it ourselves. -
Having issues with workbook and sharing
Ive used excel for my scheduling for over 10 years or so and sharing it so everyone in the office has access. Since we switched to the new office, now it changes the fonts, colors, size every time you open it. Tied to set a default them but
didnt work, its driving me nuts having to change 100 cells or lines every time i open it. Any ideas? Thank you!Hi,
Do you mind telling us what is the previous and new version of Office? From Excel 2003 upgrade to Excel 2007 or later version?
If it is, the issue may be caused by the file format, we should make sure that the workbook is being saved in native Excel 2007/2010 format. If you are saving it in the older Excel 97-2003 format, then it is possible that the losses you are seeing are
due to the formatting not being supported in the older format.
Then, we may try the workaround: Transfer your data from the current workbook to a new workbook and then see if the problem occurs in the new one.
http://excelribbon.tips.net/T009484_Losing_Formatting.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
Lenovo 3000 N200 ( 0769- A63) 0769 BAG processor upgrade limit and type
i have folloing system properties
TYPE
0769-A63
07/12
Name
Lenovo 3000 N200 Notebook (0769-A63)
Specs
Based on 0769-BAG: T2330(1.6GHz), 2GB RAM, 120GB 5400rpm HD, 15.4in 1280x800 LCD, Intel X3100, CDRW/DVDRW, Intel
802.11abg wireless, Bluetooth, Modem, 10/100 Ethernet, Secure chip, Fingerprint reader, Camera, 6c Li-Ion, DOS
License
Chipset: Intel 965 Express Chipset probably
i want to upgrade my processor to core2duo etc
what will be the type/types of processor/s that can be used to upgrade it and what is the upper limit of speed of processor that can be attached
thanks
Moderator Note; s/n edited for member's own protectionWow, thank you, what an awesome little tool!
So, I found that these 2 RAM products are compatible with my laptop:
Part Number: CT758799
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
Part Number: CT699699
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-5300
Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
Thanks for all your help on this. -
Every time I try to download a free app or even upgrade any of my apps for free it tells me to put my Apple ID I do that then it say there a billing problem with previous purchases. So I click continue and put in my debit card information correctly but still won't work it always declines it and says he's different payment method. what can I do it's been like that for 3 months that's the only card I have.
Hi ..
I replied to you here > Download or upgrade current and free apps says there's a billing problem with previous purchase previous purchase what can I do to fix it -
Delete WorkBook and Query file from Server .
Dear All Experts .
I dun know i posted in correct places or not .. (correct me if i m wrong) .. i want to ask about the BW Workbook and query.
How we going to remove the remove the workbook or query files from Server ? bc i tried to delete from Analyzer(excel 2007), the file is deleted from the view , but havent delete from the server... So how i going to remove the file from server ?
Thank.Hello I have the same problem. Can you please tell me how you finaly manage to delete the workbook.
thank's you for advance,
Akiba -
Upgrading RAM and SSD on MacBook Pro 15" mid 2009
Hey,
I want to upgrade RAM and SSD on my macbook pro, identifier 5,3, and I want to make sure the parts I picked will be compatible with my Macbook.
I'm specifically not sure about its support of 512GB.
I thought about RAM:
http://www.amazon.com/Crucial-PC3-8500-SODIMM-204-Pin-CT2K4G3S1067M/dp/B008LTBJF M/ref=sr_1_1?ie=UTF8&qid=1420487078&sr=8-1&keywords=DDR3+PC3-8500
SSD:
http://www.amazon.com/Crucial-MX100-adapter-Internal-CT512MX100SSD1/dp/B00KFAGCU M/ref=sr_1_1?ie=UTF8&qid=1420486598&sr=8-1&keywords=CT512MX100SSD1
Thanks!" I have also created a back up on Time Machine (I think I did)."
Check this out:
http://macintoshhowto.com/repair/back-up-computer.html
Once you think you've done it correctly restart and hold down the option key or go to "System Preferences" under the Apple and look at "Startup Disk".
That will tell which Disks are bootable.
Now about that Crucial drive:
http://forum.crucial.com/t5/Crucial-SSDs/512GB-M4-and-2009-Macbook-Pro/td-p/7805 6
It's not clear to me that this issue was resolved. The last post goes nowhere!
I always use OWC:
http://eshop.macsales.com/shop/SSD/OWC
Just did two including this MacBook Pro early 2011 13" and a 2012 Mini. Total no-brainer! The way I like it. -
Window 8 and Windows 8.1 Upgrade Information and Windows 8 Tips
Need a tip on "how-to" do something in Windows 8 then the below links might provide the information that you need.
Microsoft Windows 8 upgrade assistant and FAQs.
HP Windows 8 Upgrade - Important Information Before You Upgrade.
HP Windows 7 to Windows 8 conversion information for Notebooks.
Test my HP PC for Windows 8 Compatibility.
Windows 8 – Tutorial Index and Windows 8 Tips
Windows 8 Apps more Windows 8 Apps
Windows 8 System Requirements
Additionally, if you Google "Windows 8 tips", you will find many excellent articles posted on the internet.
Windows 8.1 upgrade suggestions:
There are some important steps to take prior to doing the upgrade. Review this MS posted document. Be sure to run the upgrade assistant.
Be sure that Windows 8 has all of the latest MS updates installed. There are prerequisite patches that are required.
Be sure that you have at least 40 GB of hard disk free space.
Back up your data to external media.
Make a Windows 8 recovery media to external media before doing the upgrade. I prefer to use a third party hard drive imaging program.
Temporarily disable the antivirus software.
You will need to reinstall your programs after the upgrade so make note of which ones are required.
Check the HP Support site for Window 8.1 updates for your particular PC. If you don't see any updates then your PC has not been tested/certified with Windows 8.1.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPTI've been running 64-bit Windows 8 Consumer Preview very nicely for several months and want to upgrade to 64-bit Windows Pro on my Pavilion a1440n. When I've tried to install from within the OS I get weird messages indicating that it can't be installed on a USB Flash drive (which I'm not trying to do). When I tried doing a clean install I got an odd message saying that certain installer files were missing and it would not complete. I called Microsoft customer support and the agent there thought my cpu would work because it wouldn't support Hyper-V, even though I understand that it optional. From running coreinfo.exe I can see that I have the PAE, NX, and SSE2 on the cpu enabled as meets requirements.
When I ran through th HP site I saw that this machine has not been tested. Is there any way of getting confirmation that Windows 8 Pro 64-bit will or won't run on my machine? The HP Product code for it is ER904AA#ABA.
Thanks! -
My headphone jack no longer works. I just upgraded software and did all the iCloud install.
my headphone jack no longer works. I just upgraded software and did all the iCloud install. Any ideas?
It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you. -
Hi guru
I have a problem :
I have one role in PFCG for access from BEX to the query of an infocube.
Under this role there are some workbook saved by the user.
My question is : if I cancel the role all the workbook are lost ? Is there a Way to save the workbook and assign the workbook to another role ?
This is because I need to recreate the roles in PFCG for query access reorganization, but i'm confused on assigning the workbook to the new roles
Thank' in advanceHi Antonio,
This is a very simple task , copy the role as per other experts steps
go to your original roles authorization data , see where the workbook is inserted in Z1 ( A1 )
in Z2 ( w1...... )
note down the authorization object where its inserted
take down the field values also from the original role.
NOte down
Authorization object
Field name --- values
Now come to your New/Copied role
Search for the authorization object
enter all the values that you need into this role against its field name.
Actually you dont need to copy roles too.....
just open the role Z2 , find where the A1 is inserted, then add all that you need next to A1
Siddarth varma has provided the steps to follow very clearly to do this
Look at threads like this
Re: Save Workbook in a role in SAP BI
Edited by: Franklin Jayasim on Jul 7, 2010 8:59 PM
Edited by: Franklin Jayasim on Jul 7, 2010 9:03 PM -
iPhoto asked to upgrade library and has now come up empty even though my iPhoto file is over 130GB. How do I get back my photos? I am using OS X Yosemite 10.10.1 with Mavericks. My iPhoto is 9.6. I am very concerned as this file has all my photos for the last 15 years!
If the iPhoto Library is still 130 GB large, your photos are probably still inside; perhaps the library has a corruption.
Or the iPhoto Library is on drive, that is incompatible with iPhoto. Where is your iPhoto Library stored?
To check for a library corruption: Ctrl-click or right-click the iPhoto library and select "Show Package Contents". This will show the folders inside the library package.
Are there folders called "Masters" or "Old Masters"?
If there is a folder "Old Masters", you are having a problem with recent bug, that corrupts iPhoto Libraries when upgrading. In that case, it would be best to restore your iPhoto Library from a backup you made before you upgraded to Yosemite.
Or, if no backup is available, copy the "old Masters" folder to a folder on your Desktop and create a new iPhoto library and import the Old Masters folder.
If there is no folder "old Masters" try to rebuild your iPhoto Library with the First Aid tools :
Make a backup copy of your iPhoto Library, but don't overwrite any older backups.
To launch the "First Aid Tools" hold down the options-command keys ⌥⌘ while double clicking your iPhoto Library.
Keep the keys held down firmly until the First Aid panel appears.
Select "Rebuild Database". -
2011 Macbook Pro - if i upgrade ram and Hard drive will it void my applecare ?
2011 13" Macbook Pro - if i upgrade ram and Hard drive will it void my 3 years of applecare ? - Does apple offer this service ?
ThanksHowever it might be worth reading this article in The Register about Apple not using standard temperature sensing methodology - see
http://www.theregister.co.uk/2011/05/14/imac_hard_drive_replacement_woes/http://
also read the links to OWC comments. -
I was just forced to "upgrade" iphoto, and most of my slideshows are gone. What is going on? I'm desperate here.
Thanks for the reply.
It wouldn't open unless I clicked "upgrade." The other option was "cancel." The Genius at the Apple Store said I had no choice. The new stuff looks idfferent but maybe it's just taking a while to go through all my photos. I can't tell what is going on exactly, but I'm nervous to see the last slideshow there is 2010.
We are backed up on Carbonite, but the hoops to go through getting specific items back seems daunting to me. -
i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????
Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support
Maybe you are looking for
-
Is there a way to reagrrange my apps? or set up folders to put them into by subject?
Is there a way to rearrange my Apps or set up folders to put them into by subject?
-
Is it possible to connect a new Macbook Pro to a G5 iMac and have it ONLY move a single user from the iMac? I ask this question hoping for two pieces of advice: 1. How to transfer a single user when starting a new computer, including what cables I ne
-
Best way to deal with different screen sizes
Hi ! We have been a small company using java for our client ( http://www.topbridge.com ) . The Swing client has used panels with absolute positions so the client would fit in 800x600 screen. Since java is 'run everywhere' we would like to rewrite it
-
what is the code in batch script for renaming the file
-
Installing LV Runtime on PC with VEE Runtime already installed?
My LabView programs have to coexist on a PC that has Agilent VEE programs on it already. At least until my programs are fully accepted, then the VEE stuff will slide to the side. Can LV runtime be installed on a machine that has VEE runtime on it al