Upgrading from Excel 97 to Excel 2000

Recently, I upgraded from excel 97 to excel 2000.
Since then, all the Labview vi's I've used to work with excel are no more executable (broken wire) on my computer.
However when I opened these vi's on another computer (also with excel 2000) there are no errors.
How can I make these vi's work on my computer?
Are there something missing during excel 2000 installation? How can I check that?
I'm using Labview 5.1 under Windows NT
Thanks

If you are referring to the "Write table to XL.vi" try doing the following:
1) Go into the block diagram and open up the vi "Open Excel and make visible.vi"
2) Right mouse click on Automation refnum (The label is titled exel._application)
3) Check to see that under the area "Select ActiveX class" that excel is
selected.
If not you will have to browse through your directories and locate
excel8.olb for
excel97 (I don't know what it is for excel 2000).
4) After that, go to the property and invoke nodes and reconnect the wires.
[email protected]
[email protected]
Attachments:
XL_2000_read_to_Table.zip ‏64 KB

Similar Messages

Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
Computers are being upgraded to Microsoft Excel 2007.
What is the best pratice for Smartview in this situation?
1. Do nothing with Smartview and just install Excel 2007.
2. Install Excel 2007 and then uninstall and reinstall Smartview
3. Uninstall Smartview, Install Excel 2007, and then install Smartview
4. Somthing else??
Thanks!

We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

3 range parameter query to Oracle data base from Excel 2000

A user bas been trying to setup parameter queries into an Oracle
DB. He normally used MS query and written VBA code to
modify the query for daily or adhoc updates.
With Excel 2000, he wanted to take advantage of parameter
queries linked directly to cells in a spreadsheet.
He was able to get single or two level parameter queries
directly linked to the spreadsheet to run, however every time he
went to a
three level parameter query it crashed while returning the data
to Excel.
The error windows read: Microsoft Excel [Oracle][ODBC] with no
other details.
Is there a limit on the number of "levels" for parameter
queries.
The user was able to build and see the results of a three level
query in MS Query, but every time he tried to return the data to
Excel, it crashed.
Jeff

This is an Microsoft Access problem. When you initally connect
to an ODBC source database Access caches the connection and does
not ask for connection information on subsequent linked table
accesses. This causes a problem if you request information from
tables belonging to different users during the same Access
session. The way to avoid this error happening is to create a
user with access privileges to both users being used by the
Access front end. When you connect to Oracle use the new user
and you should be able to connect to all the linked tables. It
may also be worth copying the Access databases to one single
database and trying the migration that way.
Regards
Daniel

Upgrading from fp 1600 to fp 2000

I came across this http://www.ni.com/white-paper/3975/en/ when searching for relevant topics. Is there a way to do what is shown in this tutorial in Measurement and Automation? We're upgrading all of our fp 1600s to fp 2000s and 2010 and would really like to avoid rebuilding the directory and applications. If anybody knows of a way I can do this, your advice would be greatly appreciated. Thanks!

http://www.ni.com/support/fieldpoint/fpenet.htm

Excel file error after upgrade from 2010 to 2013

Hi there,
I did the upgrade from 2010 (Enterprise) to 2013. The excel files are not opening giving error.
ULS Log: "Unexpected error when trying to access service settings in the configuration database. Make sure the proxy for this service application is a member of the default proxy group for the active web application. Error = ExcelServerWebServiceApplication.Local:
Could not get the web application associated with this context. This indicates that the Excel Server service is not properly registered or provisioned.."
Question : Do I need to create New Excel Service Application separately on SharePoint 2013 Server?
I followed this link for upgrade
http://technet.microsoft.com/en-us/library/jj839719.aspx but it doesn't say anything for Excel SA.
Note: I have plan to configure separate Office APP Server to give user access the documents on iPad/iPhone. Should I need to do any configuration related to this error on Office App Server?
Please advice.
Thanks,
Khushi

Hi Khushi ,
Yes, you need to create New Excel Service Application separately on SharePoint 2013 Server. Due to only the following service applications have databases that can be upgraded when you upgrade from SharePoint
Server 2010 to SharePoint Server 2013:
Business Data Connectivity service application
Managed Metadata service application
PerformancePoint Services service application
Search service application
Secure Store Service application
User Profile service application
Attaching and upgrading these databases configures these service applications. Settings for other services will have to be reconfigured when you upgrade.
Reference:
Services upgrade overview for SharePoint Server 2013
For configuring Office Web Apps Server , you can refer to the blog:
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Excel layout changed after EHP5 upgrade from EHP4.

Hi All,
We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
This is affected us as we have lot of macros enable for the excel files.
Request you all to help. Is there any sapnote, anyway we can resolved this issue.
Thanks

Hi Markus,
Thanks for reply.
I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
New Format Example
Production plan
Description                        Material                               Sales doc.
IRB 2600 M2004                 3HAC020536-018              104861
IRB 2600 M2004                 3HAC020536-018              2BT0615486
OLD Format
Production plan
                                      Description                    Material                               Sales doc.
                                      IRB 2600 M2004            3HAC020536-018               104861
                                      IRB 2600 M2004            3HAC020536-018               2BT0615486
Hope this above will help to make it clear.
After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
Thanks
Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

Just upgraded from Safari to Maverick, but pop-up informed me that Mav does not support Microsoft word or excel. What's up with that?

Just upgraded from Safari to Maverick, but pop-up informed me that Microsoft Word or Excel will not run on OS X Mavericks. What's up with that? Should I click accept or ok?
I assume this is the latest Mav OS...so the version would be 10.9.2? It was suppose to be a free download from Apple.

If you do not want to spend a lot of money on buying the latest Office you can get most or all of what you need from LibreOffice which is free. http://www.libreoffice.org/download/libreoffice-fresh/

Any workaround for using Excel 2000 in 2004s ???

Greetings.
1. We have Excel 2000 and Windows 2000 standardized in the company and not upgrading to the Windows XP/Vista in the immediate future.
2. Since the new 2004s BI tools do not support downloading to Excel 2000, we are looking for other options such as continue using 3.5 query designer. But from the 3.5 Query designer "Display Query on the web", Publish to Portal or Bex Broadcaster links not working or erroring out.
Greatly appreciate your tips and suggestions for this scenario.
Thanks.
PK

Hello PK,
Do not try to find a workaround to use excel 2000 with NW 2004s. This may not be useful as Excel 2000 is not supported by SAP for NW 2004s.
But you should be able continue using BW 3.5 tools. Please post the errors that you are getting so that members can help you.
Regards,
Sheik Bilal

Problem for Report Generation Toolkit for excel 2000

Hi all,
Now I am Developing my program with Report Generation Toolkit 1.1.0 and Labview 7.1.
In my computer I am using Excel XP, and there is not any problem. But when I build to
a exe file, and use in a computer with Excel 2000, it didn't work.
And I try to check the source file in this computer, I found that there any some connection
error. And this is caused by the active X class. As I know Excel 2000 is using Microsoft Excel
Object Library 9.0, but i cannot find it in the list of active x. So it is using Microsoft Excel Object
Library with a very old verison. So in the property node there are missing functions, such as the
UsedRange in _Worksheet in the Excel_Get_Range.vi. However, In VBA, I can find the 9.0 Library.
Is it the problem of 9.0 library? How can I solve the problem? How can I upgrade the library to 10.0?
Thanks.
Regard,
Ryan

Hi Mike,
Since my program is for all the staff in office, everyone may use it.
I cannot call the whole office to upgrade the excel to XP.
And I think Report Generation Toolkit is alway support Excel 2000,
since the old version of it is not support for Excel XP.
Regard,
Ryan

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Report Generation Toolkit with Excel 2003 and Excel 2000

Hello,
I'm using the Report Generation Toolkit to generate an Excel report from an Excel template.
The "NI_Excel.lvclass" is included in the "source" section of the application builder options.
I create an exe file on a PC where Excel 2003 is installed. On a Notebook, where only Excel 2000 is installed, the application crashes at the generation of the report:
I guess the problem is the different version of Excel but I don't know. On the developer PC with Excel 2003 it works fine.
In this document it's only talked about different Word versions.
How can I use the Report Generation Toolkit here?
I'm using it that way:
Regards

Oh, it seems that the Report Generation Toolkit "only" supports Excel XP/2003/2007.
I think, that's the problem.

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

How to call a labview dll from excel-VBA?

How to call a simple Labview DLL from Excel VBA?
I have seen examples of DLL calls from VB but does it work the same way for VBA? I have 2000 excel and Labview 8.5. I created the DLL and tried to call it from VBA using the same type of code as in NI's website example(ofcourse its a bit diff with 8.5)
http://zone.ni.com/devzone/cda/tut/p/id/...
BUT it errors out when called from excel
ERROR: The object invoked has disconnected from its client

You would need to provide more details about the LabVIEW DLL, such as the prototypes of the functions (VIs) that you're trying to call, and your actual VBA code. Specifically, what object you're trying to create. You should also make sure the Run-Time Enginer is installed, as well as any required libraries such as the VISA Run-Time if you're using VISA. Have you made sure to enable the ActiveX server for the DLL?
A search yielded the following items that you may wish to peruse:
http://forums.ni.com/ni/board/message?board.id=170&message.id=261345&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=45099&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=299209&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=195846&requireLogin=False

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
    v_full_filename         varchar2(500);
    v_server_path           varchar2(2000);
    v_separator             VARCHAR2(1);
    v_filename              VARCHAR2(400);
    filename                VARCHAR2 (100);
    v_stop_load             varchar2 (2000);
    v_rec_error_log         varchar2(4000);
    v_error_log             varchar2(4000);
    ctr                     NUMBER (12);
    cols                    NUMBER (2);
    btn                     number;
    RES                     BOOLEAN;
    application             ole2.obj_type;
    workbooks               ole2.obj_type;
    workbook                ole2.obj_type;
    worksheets              ole2.obj_type;
    worksheet               ole2.obj_type;
    cell                    ole2.obj_type;
    cellType                ole2.OBJ_TYPE;
    args                    ole2.obj_type;
    PROCEDURE olearg
    IS
    args   ole2.obj_type;
    BEGIN
    args := ole2.create_arglist;
    ole2.add_arg (args, ctr);
    ole2.add_arg (args, cols);
    cell := ole2.get_obj_property (worksheet, 'Cells', args);
    ole2.destroy_arglist (args);
    END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
                                 ,file_name      => null
                                 ,file_filter    => 'Excel files (*.xls)|*.xls|'
                                                                        ||'Excel files (*.xlsx)|*.xlsx|'
                                 ,message        => 'Choose Excel file'
                                 ,dialog_type    => null
                                 ,select_file    => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
    filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
    application := ole2.create_obj ('Excel.Application');
    ole2.set_property (application, 'Visible', 'false');
    workbooks := ole2.get_obj_property (application, 'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg (args, filename); -- file path and name
    workbook := ole2.get_obj_property(workbooks,'Open',args);
    ole2.destroy_arglist (args);
    args := ole2.create_arglist;
    ole2.add_arg (args, 'Sheet1');
    worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
    ole2.destroy_arglist (args);
    ctr := 2;                                                     --row number
    cols := 1;                                                -- column number
    go_block('xxx');
    FIRST_RECORD;
    LOOP
            --Column 1 VALUE --------------------------------------------------------------------
        olearg;
        v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        :item1 := v_stop_load;
        cols := cols + 1;
          --Column 2 VALUE --------------------------------------------------------------------
        olearg;
        :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        cols := cols + 1;
        --<and so on>
    ole2.invoke (application, 'Quit');
    ole2.RELEASE_OBJ (cell);
    ole2.RELEASE_OBJ (worksheet);
    ole2.RELEASE_OBJ (worksheets);
    ole2.RELEASE_OBJ (workbook);
    ole2.RELEASE_OBJ (workbooks);
    ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

Upgrading from Excel 97 to Excel 2000

Similar Messages

Maybe you are looking for