Upgrading the current EP 5.0 SP5 version to EP 6.0
Hi,
We currently have our production portal running with the following configuration.
1) SAP Enterprise Portal 5.0 SP 5
2) Oracle DB 8.1.7
3) SAP J2EE engine 6.20.
we are using 2 servers: one is the EP 5.0 Portal server with SAP J2EE 6.20, and the other is Oracle DB with LDAP server
We want to upgrade the current EP 5.0 SP5 version to EP 6.0. Could you furnish the details for the upgrade and migration with regards to which version to use in EP, the DB version and other softwares required. Also the Hardware required and configuration setup information issues.
Awaiting a response
Regards
Rohan
Hi john,
Well could u tell me the approx time estimate(in weeks or months would be helpful)that is required to do the following:
1)Upgrade EP5.0 sp5 to EP5.0 SP6
2)Apply the Hotfix and patch 1 to make it ready for upgrade to Netweaver '04 Stack 14
4)Install and configure Netweaver '04 Stack 14
3)Complete the migration from EP5.0 SP6 to the new portal using SAP migration tools
The above, is the procedure given in the upgrade guide.
And it tells it is a lengthy time consuming task.
I need to estimate the -TIME FACTOR-(in weeks or months) taken to accomplish the task using 2 consultants, as it is to be used for proposing the upgrade project to my client.
Awaiting a response
thanks and regards
Rohan
Similar Messages
-
How do I upgrade the plugins needed for my earlier version of InDesign CS5 so I can open a file in a later version of CS5?
You can’t. You have upgrade or have whoever is send you files save as IDML. Don’t expect perfection.
-
Initially I had downloaded Document 2 (Free) application to view my doc, ppt and xls files. I was not able to edit the files so there was an option for upgrade the Document-2 free to paid version. I have upgraded the Document 2 application. But on my iPad now there are to application present Docemnt-2 (Free) and Document-2. I am not able to open any existing document using the upgraded version of application. How do I connect all the existing txt,PPT,XLS doccument to the new upgraded Document-2 application and then to edit it on my iPad.
As suggested I had deleted the free application and did a hard restart the iPad. I have again copied the document using iTunes. But I am not able to edit any document using this app. Document 2 (paid version) supports editing features of the txt/ xls /ppt files. Is there any problem while loading the Document 2 app. If I reload then do I need to purchase again?
-
JPS-00080: Credential store schema version 12.1.2.0.0 is less than the latest schema version 12.1.3.0.0, upgrade the Credential store schema to latest version.
Hi All,
When trying to extend my domain, it fails with above error.
any suggestions on fix?
is this related to Fusion Infrastructure ADF RCU utility?
thanksHi JCGO,
The Schema installed on your DB is 12.1.2.0.0 but the Domain Extension requires 12.1.3.0.0.
One solution is to run the 12.1.3.0.0 RCU, drop the existing schema on your DB, followed by installation 12.1.3.0.0 schema on the DB, so that the Domain extension gets the 12.1.3.0.0 schema
One more solution is to open the template on which you are extending the domain. The templates are present in ${MW_HOME}/oracle_common/common/templates/wls , explore to the required configuration inside yourtemplate.jar and comment out the Credential store schema version pre-requisite. This is not a good approach, but still it'll be a good workaround since 12.1.2.0.0 and 12.1.3.0.0 schema wont have much difference.
Thanks,
Shiva Shankar B N -
Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free? Many thanks in advance!
Whether you need to buy Mac OS X 10.7.3 depends on what version of OS X you have now.
If you have OS X 10.6.x or lower it is a paid upgrade from the Mac AppStore.
If you have OS X 10.7.x it is a free upgrade you get using Software Update on your Mac. -
I have just upgraded the software on my iphone to version 6. I saved all apps and itunes purchases to my computer before upgrading. How can I now put the apps I bought back onto my phone and also onto my new ipad?
linnieg wrote:
I have just upgraded the software on my iphone to version 6. I saved all apps and itunes purchases to my computer before upgrading. How can I now put the apps I bought back onto my phone and also onto my new ipad?
Upgrading the OS does not remove your apps and purchases. -
After I bought my new RMBp, apple upgrade the old rmbp to a new version, what should i do now?
By the way, I have already all the systems, like CPU, RAM and SSD
Can I get a free upgrade to the current version?
CheersWelcome to the Apple Support Communities
If you bought the MacBook less than 14 days ago, you can return your MacBook Pro and buy the new MacBook Pro with Retina display, if you want. It won't be free, unless the new MacBook Pro you want costs less money or the same as your actual Mac.
If you bought it more than 14 days ago, you are out of luck because you can't return the MacBook -
Help upgrading the ACE 3(0)A1(3)version to any A1 train release
Hello All,
I would like to know where on cisco website i can find the procedure for upgrading the version ACE 3(0)A1(3) to the latest A1 train release i.e A1(6.2 or 6.3) i tried searching it but found this and no aware there is mentioned of upgrading from A1(3) to any other firmware.
Also this software is no longer avaialable.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/release/note/RACE30X.html#wp355341
Any help would be appriciated. Thanks in advanceHello,
The A1 train documentation was released for A1(2) and the process for upgrading documented in the Administration Guide Appendix A is correct. See http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/administration/guide/upgrade.html
I used the procedure to upgrade from A1(4a) without problems.
HTH
Cathy -
Adobe not rendering the current timeline, but a cached version?
Hello!
This is driving me up the wall, and costing me a great deal of time, so any help would be appreciated. Inside my Adobe Premiere project I have a referenced composition from Adobe After Effects. Every now and then I need to tweak the After Effect composition, and when I do the changes instantly show up in Adobe Premiere. This is the behavior I am looking for. When I export everything out to Adobe Encoder for my final render, sometimes the changes don't show up and I end up with an older version of the file. It's as if there is a cashed version someplace that isn't being cleared. Any advice?
Using Creative Cloud 64bit fully updated on a Windows 7 workstation.
-AvotasMake sure you are not checking the box that says "Use Previews" when you export.
-
Ask the Expert: Upgrading Cisco Unified Communications Manager (CUCM) to Version 9.1 (Drive to 9)
Welcome to the Cisco Support Community Ask the Expert conversation. Learn from experts Vijay Rao and Amit Singh about simplified upgrade process and focused support from Cisco to migrate to version 9.1.
This is a continuation of the live Webcast
Drive to 9 is a comprehensive and holistic program designed to help you upgrade the current Cisco® Unified Communications Manager installed base to version 9.1 or higher. This upgrade will enable customers to have next-generation collaboration experiences.
During the live event, Cisco subject matter experts Vijay Rao and Amit Singh focussed on the simplified upgrade process and focused support from Cisco to migrate to version 9.1. They also talked about the changes made to the licensing model of User Connect Licensing and Cisco Unified Workspace Licensing.
Vijay Rao is a Network Consulting Engineer and is currently a unified communications (UC) consultant for Bank of America. He has been providing consulting assistance to the bank for the past 6 years. He helps design complex UC networks for large enterprise customers. He was previously part of Cisco IT in the Asia Pacific, Japan, and China (APJC) region and was instrumental in designing and implementing the Bangalore campus. He has been working with Cisco for 9 years and has 12 years of UC experience. He has a Cisco CCVP® certification.
Amit Singh is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has 7 years of experience in his areas of expertise: wireless, Cisco Unified Communications Manager, multiservices, Cisco Unity®, and Cisco Unified Contact Center Express. He has been involved in various escalation requests from India, Singapore, and Australia and is currently working as a technical lead for the Voice team in Bangalore, India. He is a computer science graduate.
Remember to use the rating system to let Vijay and Amit know if you have received an adequate response.
Vijay and Amit might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community forum shortly after the event. This event lasts through July 19, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
Webcast related links:
Webcast Video
FAQ from the live webcast
Slides from the live webcastHello Robert,
Apologies for a delayed response, some days get very hectic.
In CallManager, we only define the SRST reference, and CUCM version and SRST version are independent of each other.
The only thing, which is related and will change with CUCM upgrade is Phone F/w version.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
You may just want to check your, phone f/w compatibility with the SRST version running on your ISR G1 Gateways:
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
For Example: SRST version 7.1
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
You may want to do some lab testing with CUCM 9.1 and an SRST supported f/w on your phones.
If you decide to run the old Phone/F/w to support the SRST version, you may not be able to take advantage of new features.
Also, you can try and upgrade your phones(Wih CUCM 9.1) and test them with your SRST version.
It should work fine, but from a troubleshooting perspective, TAC may request you to come into a Cisco Supported combination.
Please, let me know if this clarifies your doubt or we can have a quick phone call.
Regards
Amit Singh -
How to open "Open All in Tabs" in the current tab as it did before Firefox 8.x
When click on "Open All in Tabs" on a grouped bookmark item Firefox use to open the group of tabs from the current tab onwards. Since version 7.x it does it by opening a new tab first and leave the current tab unchanged. Is there a setting to be changed to have the same behavior as before? It seems not logical because when I click on a single bookmark item it opens in the current tab.
Yep. Those are all correct.
Here's what I've learned from another site, Sandboxie. And this is why I hate upgrading FF and other s/w if I don't absolutely have to. They always changes stuff:
I believe this link discusses the related change in Firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=491947
Before version 14, Firefox used a mechanism called DDE to send links to an open instance of itself. Sandboxie includes support for this kind of one-way DDE communication, specifically to support that use case, which has now stopped working.
'''It stopped working because Firefox 14 no longer uses DDE, as described in that Firefox bugzilla page.'''
I have to take back my earlier post and say that there is nothing I can do about this in Sandboxie and that some kind of workaround will have to be the long term solution.
Guest10's solution works well, but I can't add it as a default in Sandboxie because it means that if you have an open Firefox outside the sandbox and you run Firefox in the sandbox, then a new window (or tab) opens in Firefox outside the sandbox, and nothing runs in the sandbox. I feel this kind of behavior is too confusing to offer as part of Sandboxie.
It might be possible to restore the old functionality in Firefox 14. The bugzilla page says something about Firefox 14 trying to remove all DDE functionality, but the following still seems to work for me. Download the following .reg file to your desktop (outside the sandbox), then double-click it, and confirm entering it into the registry.
See http://sandboxie.com/phpbb/viewtopic.php?t=13330 for a link and a reg file. -
[Forum FAQ] How to upgrade the Linux Integration Service
Symptom
When you move a Linux guest virtual machine from the legacy system to Windows Server 2012 R2 Hyper-V host, you may face the incompatibility issues. The most common problems are that the mouse pointer maybe a little inaccuracies, the guest VM cannot use the
dynamic memory.
Cause
The cause may be that the integration service not compatible with the Windows Server 2012 R2 Hyper-V host.
Solution
We need to upgrade the integration service to at least version 3.5.
In this demo, we use the CentOS 5.8_x86_x64.
You can refer to the following steps to perform the upgrading.
1. Before install the Integration service you can use the following command to check the version of the installed Integration service. (Figure 1)
#su root
#/sbin/modinfo hv_vmbus
Figure 1: check the version of the installed Integration service
2. Download the Integration Service 3.5 image from here.
http://www.microsoft.com/en-us/download/details.aspx?id=41554
3. Insert the Integration Service 3.5 image.
a. Open Hyper-V Linux guest VM console.
b. Click-> Media->DVD Drive-> Specific the Integration service image location, insert Disk.
4. Mount the image.
If automount is enable, the Integration service image will be mounted automatically. If not, please use the following command to mount the image. (Figure 2)
#mount /dev/cdrom /media
Figure 2: Mount the image
After that, we can see the image content. (Figure 3)
Figure 3: Imange content
5. Upgrade the integration service.
Use the following command locate to the current Linux Distribution Directory. In this example, we select the RHEL58. (Figure 4)
#cd RHEL58
#./upgraee.sh
Figure 4: Locate the Linux Distribution Directory
When you see the message, "Linux Integration Service for Hyper-V has been upgraded. Please reboot your system", it means the upgrading is finished.
6. Reboot your Linux system. (Figure 5)
Figure 5: Reboot the system
7. Confirm the upgrading.
After Linux boots up, use the following command to check if the upgrading is succeed. (Figure 6)
#/sbin/modinfo hv_vmbus
Figure 6: Verify the upgrading.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.May be you should write a WIKI article on same.
-
Upgrading WLS 8.1 SP2 to SP5: does SSL setup need to be re-done?
All,
Our production application has been built using Workshop 8.1 SP2, and is deployed on a WLS 8.1 SP2. We are now wanting to upgrade to SP5, and so I used the "Smart Update" utility to upgrade my local instance to SP5. Our application is accessed over SSL, so I was wondering if the whole SSL-setup that was done when we setup our production SP2 environment a year ago needs to be re-done? Our application has a web module, two java projects, uses SSL-based web-services and has a custom Oracle JAAS login module. I already found out that there is a particular setting on the domain that has changed between SP2 and SP5 that allows anonymous lookup of MBeans(Anonymous Admin Lookup Enabled). Are there any other such settings/considerations i need to be aware of in moving from SP2 to SP5?
All help is appreciated..it will help me decide on moving to SP5.
Thanks in advance!
Vik.Hi Vik
When you use smartupdate to upgrade from sp2 to sp5, it will upgrade only the weblogic workshop instance and not the domains.
Either you will have to upgrade the existing sp2 domain to sp5 or create a new sp5 domain and configure it just like sp2.
After the upgrade open the config.xml under the new domain and check the SSL config under the server just to make sure.As far as the SSL config is concerned it did not change from sp2 to sp5.
More information on this is available at
http://e-docs.bea.com/platform/docs81/upgrade/faq.html
Thanks
Vimala -
HT4623 how do i upgrade my iphone 3g to newest available version ios?
how do I upgrade iphone 3g to newer version? I have already restored the phone to factory settings then it doesnt give me the option on itunes to upgrade the ios. it just says my version 4.2 is up to date.
It's already running the newest compatible version.
(93591) -
I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!
I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.
Maybe you are looking for
-
Is it possible to remove unnecessary hardware and add more memory?
I wanted to know if it was at all possible to remove, say, my cd drive and add more memory.
-
Labview 2012/Windows 7. On my developemnt machine I created a project w all my vis to run a test. That works fine. I then created an exe and that works fine. Then I created an installer for the target machine and the code doesn't work. I get that
-
SRM7 - Sourcing Cockpit steps and FPM
Hi all gurus, in SRM7 there's a sourcing cockpit for purchase requisitions which is basically split in 4 main steps: - in the first one (which corresponds to a specific WebDynpro/view) the user cah search for a PR; after the results are retrieved, th
-
Ls * = list all, how to list all that do not match...
So if I type "ls A*", it lists everything that starts with A. How would I list everything that does not start with A? Is there a straight forward way of doing that that I'm just missing?
-
Essbase System 9 or above will be supported running on Windows 2008
Essbase System 9 or above will be supported running on Windows 2008, I am planning to upgrade our system from 7.5 to System 9, Please let me knwo system requirements for Essbase System 9 Thank You