Upload request from ODS to InfoCube

Hi,
When I upload a request from ODS to Cube, how can I know which request number was created in the cube for this request. In other words if I have a request number in the ODS, which the suitable request number for it, in the cube (or vice versa)?

Hi,
In ODS > right click > Manage > Requests tab if you see a green check mark in the DataMart Status column (3rd column) this means that the request has been uploaded to the further data target. If you click on this check mark, in the pop up screen scroll to the last column. This is the request number that you will find in the cube (Or further data target).
Hope this helps...

Similar Messages

Delta Upload request from ODS is not including the Data target of planning

Hi,
I have a process chain in which there is a delta upload from ODS to 3 different data target. One of the data target is the planning cube. last 2days back i have changed the process chain schedule after was the Delta request is not hapenning for Planning cube. The process chain contains the changing the planning to load mode and load to planning mode. Every thing is working fine but the Delta is not happening for the Planning cube. Delta request are going correctly to the Other 2 data targets. Now it was like Delta has excluded the Planning cube. Another this there is nto planning package is appearing in the Infousources. and when I am trying to upload manually from ODS to Data targets it say that No delta is there. Please help me in this. This is a production problem. I have checked all the data monitors every thing is from but no delta is hapenning for the planning cube.
Thanks
Naveen.

Resolved

Some records not transfer from ODS to infocube

Hello BW folks ,
We have an ODS which stores the various sales doc. types.
We are transfering all the data from this ODS to infocube. We do not have any routine or filter conditions while loading data from ODS to infocube.
In the update rules of infocube we do not have any routine written .
Also no start routine is present in Infocube.
The data is loaded successfully from ODS to infocube.
But still a particular 'sales doc type' is not transfer from ODS to infocube.
While this 'sales doc type' is present in ODS.
The Sales doc type is maintained with respect to the Ordernumber. So If I check the Ordernumber of that sales doc type in ODS then the same Order Number is not present in infocube.
Means some / few Ordernumbers also getting deleted while transfering data from ODS to infocube.
We do not have any object in update rules as master data attribute of.
Please suggest me what to do in this case.
Amol.

hello VC,
I have checked that in ODS update rules , for key figures we have update type as Addition and the data from ODS to infocube is INIT and then delta.
Is this the reason for Overwritting the particular sales doc type ?
I thing we should do full upload only from ODS to infocube in this case.
Regards,
Amol.

Selective deletion of request from ODS which is activated and updated

Hi all,
I would like to delete the request from ODS which is activated and updated into data targets, i.e if i have three resquests 1,2,3 which are activated and loaded into cube..now i would like to delete the between (2) request from ods, it says we have to delete latest first(3) , cant we delete this 2 nd request by doing some sort of settings plz let me know if any body got come to know this...plz
Many thanks in advance,
BRB

Hi
Did you look at the Online-Docu (link above)? In the administration of the ODS (I think menue 'Manage' in an english environment -> I've none at the moment) where you see each loaded package there you have a button right of the request id (status of data mart). If you press on this a dialog screen appears. There you can press on the trash icon. This resets the delta queue for the specific request.
You have to do this for request 3 and 2. Then you can delete the request nr. 2. The bw system will then delete this request from the active data and from the change log. After this you can schedule the delta load again. This process will load request nr. 3 to the connected InfoCubes.
If you do not reset the delta queue you will not be able to load request nr. 3 from the change log.
As I supose you want not to delete request nr. 3 because of some long duration to upload and activate the whole request again.
This works fine. I've done the last weeks often because we loaded request with 3 million records and more.
Regards,
H.J.

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Error in uploading data from DSO to Infocube in 3.5(rsa1old)

While uploading data from DSO to Infocube, I selected Initial update option
In schedule tab when I clicked start, an error occured it says:
Delete init request
REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
init. again with same selection.
Can anyone let me know how should I delete that request.
Thanks,
Soujanya.

Hi,
Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
Regards,
JD Datuin

Delete overlapping requests from ODS

Hi,
Since it iss not possible to delete overlapping requests from an ods by any automated process like in info cube.
Can we still delete overlapping request using abap code or the only way to do it is to delete data (selective deletion) in a start routine.
Any tips would be helpful

Hi ,
Try the following logic to delete the ovelapping requests from a particular data source.
*& Report ZV_DELETE_REQS                                              *
*&Description:This program is for deletion of eixsting Full requests   *
*&            from ODS                                                                     *
REPORT ZV_DELETE_REQS.
data: RSICCONT like rsiccont,
      rsseldone like rsseldone.
data: begin of i_req occurs 0,
      rnr like RSICCONT-rnr,
      end of i_req.
refresh i_req.
select * from RSICCONT UP TO 2 ROWS
                  where ICUBE = 'ZCS_D10'
                  order by TIMESTAMP descending.
i_req-rnr = rsiccont-rnr .
append i_req.
clear i_req.
endselect.
loop at i_req.
select single * from RSSELDONE where RNR eq i_req-rnr and
                  source in ('0CO_OM_OPA_5',
                             '0CS_OM_OPA_1').
if sy-subrc eq 0.
    CALL FUNCTION 'RSSM_DELETE_REQUEST'
      EXPORTING
        REQUEST                    = i_req-rnr
        INFOCUBE                   = 'ZCS_D10'
      EXCEPTIONS
        REQUEST_NOT_IN_CUBE        = 1
        INFOCUBE_NOT_FOUND         = 2
        REQUEST_ALREADY_AGGREGATED = 3
        REQUEST_ALREADY_COMDENSED = 4
        NO_ENQUEUE_POSSIBLE        = 5
        OTHERS                     = 6.
    IF SY-SUBRC <> 0.
      MESSAGE ID sy-MSGID TYPE 'I' NUMBER sy-MSGNO
          WITH sy-MSGV1 sy-MSGV2 sy-MSGV3 sy-MSGV4.
    else.
      message i799(rsm1) with i_req-rnr 'deleted'.
    ENDIF.
    do.
      select single * from RSICCONT where ICUBE = 'ZCS_D10'
                                      and rnr    = i_req-rnr.
      if sy-subrc ne 0.
        exit.
      endif.
    enddo.
endif.
endloop.
hope it helps....
regards,
raju

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

<i>Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.</i>
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Shortdump problem for loadinf data from ODS to InfoCube

hai
im trying to load the data from ODS to InfoCube.But i got the following error like below
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
<b>System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Error correction:
Follow the instructions in the short dump.</b>
I looked at the shortdump.But it says that there is no shortdump for that particular date selection.
pls tell me wht i have to do
i ll assing the points
bye
rizwan

Hi Rizwan,
Why does the error occurs ?
This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
o Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
o If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
o Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
o If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
o It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
o It is a system error which can be seen under the Status tab in the Job Over View.
What happens when this error occurs ?
The exact error message is System response "Caller 70" is missing.
It may happen that it may also log a short dump in the system. It can be checked at "Environment -> Short dump -> In the Data Warehouse".
What can be the possible actions to be carried out ?
If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
(From Re: caller 70 missing).
Also check links:
Caller 70 is missing
Re: Deadlock - error
"Caller 70 Missing" Error
Caller 70 missing.
Bye
Dinesh

Updating the last date request from ODS to CUBE

Dear Friends,
Please can someone explain me.
i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
but i see in the ODS that all the data mart (tick) is available for all the request.
And please can someone explain me, if i have many request in the ods, current date previous day and so on.
Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
Thanks for your help.
will assign complete points.
Thank you so so much

Hi,
if you know everday how many request are getting updated in infocube as one request the you can check the added records in infocube .. it should be equal to the sum of all those request ..
but transferred can be more or equal .. also its depends on the
update rules ..designing ..
Hope this helps you ..
Regards,
shikha

Data tranfer from ods to infocube

Hi Friends,
I have created ODS and infocube, the data was loaded on ods sucessfully , but when tried to transfer the data from ods to infocube, the error comes. the update rules and data flows are shown correctly as in FUFU book.
the errors comes as check the load and after that the infopackage ask to delete the init request in same cube.
can anyone suggest the right way of tranferring the data from ODS to INFOCUBE and the issues to check.
Kind Regards,
Irfankhan

Hi
Recheck whether you have the request Activate data in ods (odsrcactivate data & Activate Data automatically while ods creation & odsmanageRequest tab -- request -- Activate)
If the Data is there in Active Data table then try to update the same with Update Rules.
While Info Package from ods--Cube -- the Info Package Selection should be Delta ( Init is already there in your cube as I have seen the error message you mentioned)
the update From ods to Cube
Via Info Package -- Data Target Tab -- Schedule it with options Delta --
Info Package -- Monitor -- Update Manually (Wheel)
Adding it in Process chain
Hope it helps and clear

Unable to delete request from ODS - BW 3.5

Hi experts,
I am not able to delete request from ODS in BW 3.5, patch level 21. I put the request red, but it does not help to delete it. The request is full load and quite hudge (16GB). Deleting actually takes too long (several hours), but does not finish, so I cannot tell you any error description. It seems that this job can run forever... I was trying to activate the request before, but because of a tablespace limitations I received some short dumps. That is why I am trying to load it agin in smaller parts. It is strange thou that in Manage/requests tab the request has flag 'available for reporting' but the data cannot be viewed as active (only as new data). Any ideas, OSS notes?
Thank you,
Michal

Hi,
If you want to delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
You can check OSS Notes 947481
Regards.

How to delete a specific request from ODS

Hi all,
We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is for archive records. We need all of the records from both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
thanks,
Yigit

Hi,
Thanks for your code. But is there any function module to delete most recent request from the ODS.
I had 2 requirements...One in need to delete from ODS & Other one from Cube.
FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
Can please you send FM & ABAP Code to delete request from ODS.
Thanks in advance.
Yigit
Message was edited by:
Yigit

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Upload request from ODS to InfoCube

Similar Messages

Maybe you are looking for