Uploading data in UKM_BP and UDM_BP

Hi Guru,
May I know what's the best approach or tool to use in uploading additional data for tcode UKM_BP and UDM_BP?
Thanks,
Jhay

Hi
Little more clarity on your question please.
UKM_BP : Adding additional data mean how to upload external rating to BP ?
UDM_BP : Adding additional data mean how to assign collection profile & group to BP ?
Clarify please.
Naresh

Similar Messages

Want to upload data without BDC and LSMW in FB01

Hi Expert,
I want to upload data in FB01 without using BDC and LSMW. I want to use all posting key for posting the data. Could any body provide me the code using BAPI. My flat file has all the posting key for the operation.
Regards
Sanjay

Hi Sanjay,
Here is one example showing BAPI_ACC_DOCUMENT_POST for posting vendor invoices. In the similar manner you can populate other tables like accountrecievables also. So by using the same BAPI you will be able to post a document with all possible conditions:
DATA: lt_glacct TYPE TABLE OF bapiacgl09,
      lt_vendact TYPE TABLE OF bapiacap09,
      lt_curramt TYPE TABLE OF bapiaccr09,
      lt_return TYPE TABLE OF bapiret2.
DATA: lv_objtyp TYPE bapiache09-obj_type,
      lv_objkey TYPE bapiache09-obj_key,
      lv_objsys TYPE bapiache09-obj_sys,
      wa_docheader TYPE bapiache09,
      wa_glacct LIKE LINE OF lt_glacct,
      wa_curramt LIKE LINE OF lt_curramt,
      wa_vendact LIKE LINE OF lt_vendact,
      wa_return LIKE LINE OF lt_return.
* Populate header data of document
wa_docheader-obj_type = 'REACI'.
wa_docheader-obj_key = '$'.
wa_docheader-obj_sys = 'T90CLNT090'.
wa_docheader-bus_act = 'RMRP'.
wa_docheader-comp_code = '1000'.
wa_docheader-username = sy-uname.
wa_docheader-header_txt = 'Upload using BAPI'.
wa_docheader-doc_date = '20090331'.
wa_docheader-pstng_date = '20090331'.
wa_docheader-fisc_year = '2009'.
wa_docheader-doc_type = 'RE'.
wa_vendact-itemno_acc = '0000000001'.
wa_vendact-vendor_no = '0000005200'.
wa_vendact-pmnttrms = '0001'.
wa_vendact-bline_date = '20090421'.
wa_vendact-item_text = 'Account payable'.
APPEND wa_vendact TO lt_vendact.
wa_glacct-itemno_acc = '0000000002'.
wa_glacct-gl_account = '0000089000'.
wa_glacct-item_text = 'GL account'.
APPEND wa_glacct TO lt_glacct.
wa_curramt-itemno_acc = '0000000001'.
wa_curramt-curr_type = '00'.
wa_curramt-currency = 'EUR'.
wa_curramt-amt_doccur = '-1000.00'.
APPEND wa_curramt TO lt_curramt.
CLEAR wa_curramt.
wa_curramt-itemno_acc = '0000000002'.
wa_curramt-curr_type = '00'.
wa_curramt-currency = 'EUR'.
wa_curramt-amt_doccur = '1000.00'.
APPEND wa_curramt TO lt_curramt.
CLEAR: wa_curramt,wa_glacct,wa_vendact.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
    documentheader = wa_docheader
IMPORTING
    obj_type       = lv_objtyp
    obj_key        = lv_objkey
    obj_sys        = lv_objsys
TABLES
    accountgl      = lt_glacct
    accountpayable = lt_vendact
    currencyamount = lt_curramt
    return         = lt_return.
IF sy-subrc EQ 0.
WRITE:/ lv_objtyp.
WRITE:/ lv_objkey.
WRITE:/ lv_objsys.
LOOP AT lt_return INTO wa_return.
    WRITE:/ wa_return-message.
    CLEAR wa_return.
ENDLOOP.
COMMIT WORK AND WAIT.
ENDIF.
Hope this solves your problem.
Regards,
Brajvir

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

Uploading data for Tcode IW21

Hi,
I want to upload data for the Tcode IW21,I tried to make BDC but i was giving only 1 problem that it is not able to capture the screen for Long Text as it is used as script handling.i am able to find a BAPI but i dont know how to use it,i tried to do work through LSMW but there is no information. Pleas provide me guidelines how to solve this problem.. I am providing the link to the code which i had developed(BDC) for the tcode IW21 .
Here's the code:-
http://docs.google.com/View?id=dfxswwff_3gtn9qsdp
Edited by: ricx .s on Jun 24, 2009 6:24 AM

hi,
Thanks for your help. Can i use BAPI to upload data for IW21 and how to trace the fields of a BAPI to upload the data .
Here's the code which i searched on net bu there is no information regarding the fields tobe traced and should i include it in my code which i had provided above ?
data: i_bapi2080_nothdri type standard table of bapi2080_nothdri with header line.
data: i_bapiret2 type standard table of bapiret2 with header line.
data: i_bapi2080_nothdre type standard table of bapi2080_nothdre with header line.
data: i_bapi2080_notfulltxti type standard table of bapi2080_notfulltxti with header line.
* create header data
i_bapi2080_nothdri-refobjectkey = 'PJAREF'.
i_bapi2080_nothdri-equipment    = '10000030'.
i_bapi2080_nothdri-reportedby   = 'PJAREP'.
i_bapi2080_nothdri-short_text   = 'PJA Short Test from BAPI'.
i_bapi2080_nothdri-priority     = '1'.
* create header long text
i_bapi2080_notfulltxti-objtype    = 'QMEL'.
i_bapi2080_notfulltxti-FORMAT_COL = 'U1'.
i_bapi2080_notfulltxti-text_line = 'Long text 1'.
append i_bapi2080_notfulltxti.
i_bapi2080_notfulltxti-objtype    = 'QMEL'.
i_bapi2080_notfulltxti-FORMAT_COL = 'U1'.
i_bapi2080_notfulltxti-text_line = 'Long text 2'.
append i_bapi2080_notfulltxti.
call function 'BAPI_ALM_NOTIF_CREATE'
exporting
*   EXTERNAL_NUMBER          =
    notif_type               = 'M1'
    notifheader              = i_bapi2080_nothdri
*   TASK_DETERMINATION       = ' '
*   SENDER                   =
*   ORDERID                  =
importing
    notifheader_export       = i_bapi2080_nothdre
tables
*   NOTITEM                  =
*   NOTIFCAUS                =
*   NOTIFACTV                =
*   NOTIFTASK                =
*   NOTIFPARTNR              =
    longtexts                = i_bapi2080_notfulltxti
*   KEY_RELATIONSHIPS        =
    return                   = i_bapiret2.
call function 'BAPI_ALM_NOTIF_SAVE'
exporting
    number            = i_bapi2080_nothdre-notif_no
* IMPORTING
*   NOTIFHEADER       =
* TABLES
*   RETURN            =
call function 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT          =
* IMPORTING
*   RETURN        =
Please provide me guidelines for it.Is there any way to upload the data for this Tcode IW21 through LSMW?
Edited by: ricx .s on Jun 24, 2009 10:20 AM

Upload data from excel file to mii without UDS and PCo

Hi Experts,
I am trying to upload data from excel file to mii db without using UDS and PCo. Is there any other ways that we can achieve it.
I am thinking one solution , writing stored procedure. any other solutions?
Thanks in advance,
Eswar.

Hi,
Thanks for reply.
I tried to create OLEDB data server which will point to my excel file in D drive.Its created successfully and i tried to query the datasource using sql query, I am not getting any modes in sql query template.
can u provide some steps..how to access this file.
Thanks, Eswar

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Mass Master data Upload from MS Excel and JDE into SAP ( ECC 6.0)

Hi
We are deciding the best method of uploading 2 million fixed assets Master data from Excel and JDE
We are following Batch Input (RAALTD001) and Direct Input methods (RAALTD11)
I am looking for some other efficient alternative for this upload
Look forward ot hear form you experts !!
Thanks
Milind

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

How to retrieve the data from Website and Upload it in SAP table?

Dear ABAPers,
I want to retrieve the data from website and upload the same in SAP Database Table is that possible.Please help me.It is very Urgent.
Thanks & Regards,
Ashok.

Dear Abhishek,
Thanks for your reply.But my requirement is not met.
If i execute the program it should retrieve the data from particular website.
Thanks & Regards,
Ashok.

Does anyone have a suggestion for a device that I can upload data to from an iPod when there is no wi-fi available? I'm using iForm to collect data and I need to get it uploaded to a database.

can anyone recommend a device to upload data from an iPod when no wi-fi is available? I am using iForm to collect data in the field and I want to be able to upload it periodically.

Hi there, I'm myseld using the Application data-field in order to collect mobile forms OFFLINE.
I can collect as many mobile form as i want BUT, of course, need to be online to sync the data from mobile to their cloud.
Hope that helps.
Otherwise, would probably need to plug ur idevice and look for the application database with such tool as iConnector.

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Create a table and upload data in MS ACCESS from SAP ABAP programming?

Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.

Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

Uploading data in infotype-0586 and infotype-0587

Dear Experts,
     Can i use the standard bapi HR_INFOTYPE_OPERATION for uploading data into infotype-0586( sec 80c deduction) and infotype-0587 (pf related).if so what are the parameters to be passed for the upload.
Please inform if there are any other bapi for the upload process.
regards,
Aeroshil Nameirakpam

Hi,
yes you can use...HR_INFOTYPE_OPERATION for your purpose.
in that you should pass....
INFTY                - infotype number
NUMBER           --pernr
SUBTYPE          --subtype of infotype (if applicable)
VALIDITYEND      -ENDDA
VALIDITYBEGIN   -BEGDA
but before you call this FM...make sure that you lock the employee for which you are updating the record and after this FM updates the record for that employee make sure you unlock the employee...
to lock the pernr ...use FM....HR_EMPLOYEE_ENQUEUE
and to unlock...use FM... HR_EMPLOYEE_DEQUEUE
in both of these FMs you just need to passs PERNR..
summerizing this...first use...
HR_EMPLOYEE_ENQUEUE
then call...HR_INFOTYPE_OPERATION
and then...
HR_EMPLOYEE_DEQUEUE
thats it!
<b>Reward Points if answer was helpful,</b>
Regards,
Tejas

How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

Hi,
How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

How to make a Infocube as data source and upload data? urgent

Hi all,
I have 2 same InfoCubes, and I want to make the test InfoCube(ZCO_1T) as data source and upload data to another Cube(ZCO_1), Now I has Generated Export DataSource on ZCO_1T and create a update rule between ZCO_1T and ZCO_1. what will I do the next step? Thanks.

hi delve,
once u generate datasource from test cube it acts as an data source for further upload.
now u choose update target3.x in additional functions in context menu of the test cube.
u will get an infopackage pop up with data target to the cube ZCO_1,processing to datatarget only.
selection criterion can bve selected from the first tab.
under schedule tab you can start extraction.
reward points if helpful.

How to see data being downloaded and uploaded by Mac?

hey guys, i just saw a screenshot of a Lion desktop which had the user's memory usage, data being downloaded and uploaded and CPU usage at the top right near the clock. i was just wondering how i could get this on my desktop.
thanks

Yes it is is like a small istat..Same developers,same website,i see you didn't check muck ...
Here it is anyways:
http://www.islayer.com/apps/istatnano/

Uploading data in UKM_BP and UDM_BP

Similar Messages

Maybe you are looking for