Uploading data through scat using without files
if we are uploading data for J1IS using BDC, Values are not getting updated.
so we are trying to upoad it using SCAT.
what are the steps to f
Hello Member,
This thread is locked since it does not adhere to rules of engagement. Please go through rules of engagement before you post any threads in here.
Thanks and Kind Regards
Mohan
eCATT forum Moderator
Similar Messages
-
Upload data into bdc throu word files for this which fm use
upload data through bdc from word file which function module use.
insert new field into standard table. can we create it using append structure.
-
How to upload data into CRM using batch job
Hello,
I got some problem and need some hints.
I am uploading data from a flat text file (product data) into CRM using thefunction module GUI_UPLOAD. My program starts with a selection screen whereI enter the path and the filename of the program, then I click start, and
the data is transferred in CRM. This works perfect, and I can automaticallycreate service products in CRM.
Here comes the PROB:
But now I want to automize this procedure using a batch job that automatically picks up the file from the server and processes it automatically without any user interaction. BUT I always get an error saying that my function module GUI_UPLOAD can't run in batch mode. So
anyone has an idea how to do this? Any other function modules that can run in batch mode? Any other ideas?
Thx very much for ur help on this.Hi Bill,
GUI_UPLOAD, like the name says, uses the SAPGUI to upload the data to theserver.. and in a batch job, you don't have the connection to a SAPGUI.
So you should use following kind of coding:
DATA MSG(100).
OPEN DATASET "FILENAM" FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE
MSG.
IF sy-subrc = 0.
DO.
READ DATASET "FILENAM" INTO [Your internal table].
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND [Your internal table]P_DATA.
ENDDO.
ENDIF.
The file should then be available on the server.
Regards -
How to upload data into IT0000 using ABAP-HR program
Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
Prabhakara MuthyalExample code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-PERNR'.
VALUES-FVAL = INT_0002_FINAL-PERNR.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-BEGDA'.
VALUES-FVAL = INT_0002_FINAL-BEGDA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-ENDDA'.
VALUES-FVAL = INT_0002_FINAL-ENDDA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-nachn'.
VALUES-FVAL = INT_0002_FINAL-NACHN.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-gblnd'.
VALUES-FVAL = INT_0002_FINAL-GBLND.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-vorna'.
VALUES-FVAL = INT_0002_FINAL-VORNA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-rufnm'.
VALUES-FVAL = INT_0002_FINAL-RUFNM.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-name2'.
VALUES-FVAL = INT_0002_FINAL-NAME2.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-inits'.
VALUES-FVAL = INT_0002_FINAL-INITS.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-famst'.
VALUES-FVAL = INT_0002_FINAL-FAMST.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-gbdat'.
VALUES-FVAL = INT_0002_FINAL-GBDAT.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-sprsl'.
VALUES-FVAL = INT_0002_FINAL-SPRSL.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-anzkd'.
VALUES-FVAL = INT_0002_FINAL-ANZKD.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-natio'.
VALUES-FVAL = INT_0002_FINAL-NATIO.
APPEND VALUES.
* maintain master data
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
PERNR = INT_0002_FINAL-PERNR
ACTIO = 'COP'
BEGDA = INT_0002_FINAL-BEGDA
* ENDDA = INT_0002_FINAL-ENDDA
SUBTY = SPACE
NO_ENQUEUE = SPACE
DIALOG_MODE = '0'
TCLAS = 'A'
IMPORTING
RETURN1 = RETURN
TABLES
PROPOSED_VALUES = VALUES
* MODIFIED_KEYS =
EXCEPTIONS
OTHERS = 1.
IF RETURN IS INITIAL.
WRITE:/' Done....'.
ELSE.
WRITE:/ RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
ENDIF.
CLEAR VALUES.
REFRESH VALUES.
ENDLOOP. -
Upload data through FI transation F-02
Hey All,
The requirement here is to upload data through FI transation F-02.
Using a BDC for the data upload is not suggested for this transaction as the Screen Sequence changes as per the values of the Posting Key ( and in some rare cases according to value of Account ).
Authorisations for LSMW havent been provided at this site.
I looked up SDN which showed many threads in which it was agreed that coding a BDC to handle such a dynamic sequence of screens is very complex. Some people suggested BAPIs as an alternative. Namely - BAPI_ACCT_DOCUMENT_POST and BAPI_TRANSACTION_COMMIT .
But, when I searched for the BAPI BAPI_ACCT_DOCUMENT_POST in se37, it did not exist. The version here is 4.6c
Any suggestions ?
-ashrut .
<u><b>PS - I'm a techie !!</b></u> , keep this in mind while you answer
Extra Info -
The posting keys I have to use are - GL Account Debit, GL Account Credit , Vendor Debit, Vendor Credit .
And there is the special case of a GL Account mapping to a Sales Order No for the GL Account Posting Keys.
SDN Links - BDC for FB01
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/prog-rfbibl00-230755?cv=expanded #Programmed a BDC that handled screen changes
-
Program to upload data from a tab-delimited file ...
I have to upload data from a tab-delimited file with following fields into database table(ZCBU) with same fields:
CBU (parent)
KUNNR (child)
ERDAT (effective from)
MANDT (client)
SFID (salesforce ID)
AEDAT (effective to)
AENAM (assigned by).
This file can be of type PC(txt) or UNIX.
plz tell me how to do this in both type of filesHi,
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: xfile TYPE string.
DATA: BEGIN OF itab OCCURS 0,
empno TYPE zmemp-empno,
name TYPE zmemp-first_name,
last TYPE zmemp-last_name,
comp TYPE zmemp-comp,
place TYPE zmemp-place,
END OF itab.
PARAMETER : p_file TYPE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Form to get the file path of legacy data stored on presentation server
PERFORM get_file_path.
START-OF-SELECTION.
MOVE p_file TO xfile.
to get the data from excel sheet data into an internal table
PERFORM get_data.
LOOP AT itab .
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'ZM_EMPLOYEE' '9001'.
PERFORM bdc_field USING 'BDC_CURSOR'
'S9001_EMPNO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=CREA'.
PERFORM bdc_field USING 'S9001_EMPNO'
itab-empno.
PERFORM bdc_dynpro USING 'ZM_EMPLOYEE' '9002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'S9002_PLACE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'S9002_EMPNO'
itab-empno.
PERFORM bdc_field USING 'S9002_FIRST_NAME'
itab-name.
PERFORM bdc_field USING 'S9002_LAST_NAME'
itab-last.
PERFORM bdc_field USING 'S9002_COMP'
itab-comp.
PERFORM bdc_field USING 'S9002_PLACE'
itab-place.
PERFORM bdc_dynpro USING 'ZM_EMPLOYEE' '9001'.
PERFORM bdc_field USING 'BDC_CURSOR'
'S9001_EMPNO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
CALL TRANSACTION 'ZMEMP'
USING bdcdata
UPDATE 'A'
MODE 'N'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form get_file_path
FORM get_file_path .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
file_name = p_file.
ENDFORM. " get_file_path
*& Form get_data
FORM get_data .
DATA : lines1 TYPE i.
MOVE p_file TO xfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = xfile
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab.
DESCRIBE TABLE itab LINES lines1.
WRITE : / lines1 , 'REcords uploaded' .
ENDFORM. " get_data
Regards,
Nihar Swain, -
Uploading Data Into CRM Using a Batch Job
Hi,
How can I automate the procedure of uploading data from a flat text file (product data) into CRM using the function module GUI_UPLOAD?
Thanks,
Rachita.Hi,
GUI_UPLOAD, like the name says, uses the SAPGUI to upload the data to the server, and in a batch job, you don't have the connection to a SAPGUI. So you should use following kind of coding:
DATA MSG(100).
OPEN DATASET "FILENAM" FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE
MSG.
IF sy-subrc = 0.
DO.
READ DATASET "FILENAM" INTO [Your internal table].
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND [Your internal table]P_DATA.
ENDDO.
ENDIF.
Reward points if found helpfull...
Cheers,
Siva. -
Problem with uploading data from excel using BDC for tcode f-02
Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina.. -
Transfer data through bdc using as01 tr. code
hi gurus,
please tell me transfer data through bdc using as01 tr. code.please guide me through coading how to i will proceed.i am using call tr. through recording.
thanks
subhasisSubhasis,
Best way to Convert data to AS01 is to Use BAPI BAPI_FIXEDASSET_CREATE.
Trouble free and easy conversion.
Hope this helps.
Vinodh Balakrishnan -
How to upload data for me01 using LSMW BDC METHOD
*hi export please tell me the complete procedure for uploading data in me01 using LSMW BDC METHOD*
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 8, 2011 10:06 PMHi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk -
Bw 7.0 uploading data through r3
hi all ,
can anybody plz send me any document or any snap short for uploading data through r3 at this time i make the connection between r3 and bw system
and create source system plz tell me the procedure for this
thanks.dear Ankit,
please refer to the following link of best practices:
http://help.sap.com/bp_biv270/html/BW/I08_EN_DE.htm
on this page, click on the BI connectivity link in the building blocks. This doc will give u a detailed step by step approach for your problem.
hope it helps... -
What are the steps we have to fallow to upload data through IDOC in LSMW?
What are the steps we have to fallow to upload data through IDOC in LSMW?
HI
see this link click on each link it will show you step and screen shot of that step
http://www.****************/Tutorials/LSMW/IDocMethod/
<b>Rewar di fusefull</b> -
Error while uploading data to ztable from excel file
Hi,
I have a requirement where i have to upload data from excel file to ztable.I have used the fm 'ALSM_EXCEL_TO_INTERNAL_TABLE' for reading the excel file.After reading the excel file i have used INSERT zrb_hdr from table t_zrb_hdr for updating the ztable with data .
here it is giving error as the data base table zrb_hdr and the internal table t_zrb_hdr should be declared of same type .
I got this error b'coz i have changed the date and time fields in t_zrb_hdr table to char type.so the structure of zrb_hdr and t_zrb_hdr are not same.If i don't change the date and time fields,in the o/p i am not getting proper date and time formats.
now how can i upload data into ztable?Hi,
Try this.
Data: itab type standard table of ztable,
wa_itab type ztable.
loop at t_zrb_hdr into wa_t_zrb_hdr.
wa_itab-date = wa_t_zrb_hdr-date.
wa_itab-time = wa_t_zrb_hdr-time.
like move all the fiedl to wa_itab...........
append itab with wa_itab.
Endloop.
now insert the records from itab to the database table ztable.
Thanks,
Muthu. -
Uploading data into a fixed length file
hello experts,
I got a task to upload data into a fixed length positional file from internal table.So please help me.
regards,
sriram.Hi there. What you basically need to do is set up the path and name for the export file, move your records to an output table, and then transfer the data to the file that you have specified. We usually set up our export programs so that the user can choose to download the file locally or onto the application server. So first we define the following fields on the selection screen:
PARAMETERS: p_file(128) LOWER CASE OBLIGATORY. "File
*path name from system standard
PARAMETERS: p_path LIKE rlgrap-filename MODIF ID fpn. "Path Name
PARAMETERS: p_local AS CHECKBOX. "Local File Flag
Then we use this to set the path to the application server:
INITIALIZATION.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = 'Z_AO_HR_UP_LOAD'
parameter_1 = space
IMPORTING
emergency_flag = lw_emergency_flag
file_name = p_path
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
AT SELECTION-SCREEN OUTPUT.
make path name display only
LOOP AT SCREEN.
CHECK screen-group1 = 'FPN'.
screen-input = 0. "Output (Display) only
MODIFY SCREEN.
ENDLOOP.
After your START-OF-SELECTION statement, you need to open the file for output:
IF p_local NE ztc_on.
Get Path/file Name using logical filename.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = 'Z_AO_HR_UP_LOAD'
parameter_1 = p_file
IMPORTING
emergency_flag = lw_emergency_flag
file_name = p_path
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
w_message = 'No Output file - Missing Logical File Z_AO_HR_UP_LOAD'.
WRITE: / w_message.
IF sy-batch = 'X'. "Is this in a job?
NEW-PAGE.
PERFORM end_of_selection.
MESSAGE e000(38) WITH w_message. "This causes the job to cancel
ELSE.
MESSAGE i000(38) WITH w_message.
ENDIF.
w_stop = 'X'.
STOP.
ENDIF.
*Check if output file is already present.
OPEN DATASET p_path FOR INPUT IN TEXT MODE.
IF sy-subrc EQ 0.
CLOSE DATASET p_path.
WRITE: 'Output Data file already present ', p_path.
*Use the following for logging error message
CONCATENATE 'Ouput Data file already present ' p_path INTO
w_message.
IF sy-batch = ztc_on. "Is this in a job?
NEW-PAGE.
PERFORM end_of_selection.
MESSAGE e000(38) WITH w_message. "This causes the job to cancel
ELSE.
MESSAGE i000(38) WITH w_message.
ENDIF.
w_stop = 'X'.
STOP.
ENDIF.
OPEN DATASET p_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc <> 0.
WRITE: 'Unable to open output dataset - ', p_path.
*Use the following for logging error message
CONCATENATE 'Unable to open output dataset - ' p_path INTO
w_message.
IF sy-batch = ztc_on. "Is this in a job?
NEW-PAGE.
PERFORM end_of_selection.
MESSAGE e000(38) WITH w_message. "This causes the job to cancel
ELSE.
MESSAGE i000(38) WITH w_message.
ENDIF.
w_stop = 'X'.
STOP.
ENDIF.
ENDIF.
Next you perform all of the steps to put your data in the internal table. After the end of selection we then transfer the data from the original internal table (which has many separate fields defined) to a second internal table, t_outfile, in which each record has a single field that is the total length of the original itab record:
*Internal table for Output data
DATA : BEGIN OF t_outfile OCCURS 0,
text(1000).
DATA : END OF t_outfile.
Then you can download your file, checking whether it goes to a local drive or the application server:
IF p_local EQ ztc_on.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = p_file
TABLES
data_tab = t_outfile
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
OTHERS = 9.
ELSE.
LOOP AT t_outfile.
TRANSFER t_outfile TO p_path.
ENDLOOP.
ENDIF.
Now close your dataset if it is on the application server:
IF p_local NE ztc_on.
CLOSE DATASET p_path.
ENDIF.
I hope this helps!
- April King -
Uploading data through jdbc thin client appl to database is taking time.
Hi
When application team try to upload data (excel file) through JDBC app to the database is taking too much time. When I checked through TOAD below query in background is taking too much time.
SELECT NULL AS table_cat, t.owner AS table_schem,
t.table_name AS table_name, t.column_name AS column_name,
DECODE (t.data_type,
'CHAR', 1,
'VARCHAR2', 12,
'NUMBER', 3,
'LONG', -1,
'DATE', 91,
'RAW', -3,
'LONG RAW', -4,
'BLOB', 2004,
'CLOB', 2005,
'BFILE', -13,
'FLOAT', 6,
'TIMESTAMP(6)', 93,
'TIMESTAMP(6) WITH TIME ZONE', -101,
'TIMESTAMP(6) WITH LOCAL TIME ZONE', -102,
'INTERVAL YEAR(2) TO MONTH', -103,
'INTERVAL DAY(2) TO SECOND(6)', -104,
'BINARY_FLOAT', 100,
'BINARY_DOUBLE', 101,
1111
) AS data_type,
t.data_type AS type_name,
DECODE (t.data_precision,
NULL, t.data_length,
t.data_precision
) AS column_size,
0 AS buffer_length, t.data_scale AS decimal_digits,
10 AS num_prec_radix, DECODE (t.nullable, 'N', 0, 1) AS nullable,
NULL AS remarks, t.data_default AS column_def, 0 AS sql_data_type,
0 AS sql_datetime_sub, t.data_length AS char_octet_length,
t.column_id AS ordinal_position,
DECODE (t.nullable, 'N', 'NO', 'YES') AS is_nullable
FROM all_tab_columns t
WHERE t.owner LIKE :1 ESCAPE '/'
AND t.table_name LIKE :2 ESCAPE '/'
AND t.column_name LIKE :3 ESCAPE '/'
ORDER BY table_schem, table_name, ordinal_position
All other activity on app and database is fine.
Kindly need a suggestion soon regarding this.
Thanks
SHIYASwhich is easier to read & understand?
SELECT NULL AS table_cat,
t.owner AS table_schem,
t.table_name AS table_name,
t.column_name AS column_name,
Decode (t.data_type, 'CHAR', 1,
'VARCHAR2', 12,
'NUMBER', 3,
'LONG', -1,
'DATE', 91,
'RAW', -3,
'LONG RAW', -4,
'BLOB', 2004,
'CLOB', 2005,
'BFILE', -13,
'FLOAT', 6,
'TIMESTAMP(6)', 93,
'TIMESTAMP(6) WITH TIME ZONE', -101,
'TIMESTAMP(6) WITH LOCAL TIME ZONE', -102,
'INTERVAL YEAR(2) TO MONTH', -103,
'INTERVAL DAY(2) TO SECOND(6)', -104,
'BINARY_FLOAT', 100,
'BINARY_DOUBLE', 101,
1111) AS data_type,
t.data_type AS type_name,
Decode (t.data_precision, NULL, t.data_length,
t.data_precision) AS column_size,
0 AS buffer_length,
t.data_scale AS decimal_digits,
10 AS num_prec_radix,
Decode (t.nullable, 'N', 0,
1) AS nullable,
NULL AS remarks,
t.data_default AS column_def,
0 AS sql_data_type,
0 AS sql_datetime_sub,
t.data_length AS char_octet_length,
t.column_id AS ordinal_position,
Decode (t.nullable, 'N', 'NO',
'YES') AS is_nullable
FROM all_tab_columns t
WHERE t.owner LIKE :1 ESCAPE '/'
AND t.table_name LIKE :2 ESCAPE '/'
AND t.column_name LIKE :3 ESCAPE '/'
ORDER BY table_schem,
table_name,
ordinal_position
Maybe you are looking for
-
Can I move one of my subscriptions to another Adobe ID?
Sorry, I've tried to ask this through the "Available 24/7" chat, but it just says "Chat not available now" (this has happened the last 2 times I tried chat, so I guess the 24/7 thing really needs to be changed). I have 2 subscriptions through the sam
-
Everytime i plug my iphone 4s into my windows laptop, usually it comes up with a small box saying 'installing device' but now it comes up with a box saying 'usb device not recoginised'. i have 4 usb ports in my laptop and i have tried plugging my iph
-
Hi, in weblogic510, the html pages created by a servlet (using HTMLKONA) contain the DOCTYPE as follows: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN"> Is it possible to change this to someth
-
My installation is complete but the Creative Cloud desktop app is not launching..
My installation is complete but the Creative Cloud desktop app is not launching so I can't move forward
-
Need FLV Converter for G3 10.3.9 iBook
Greetings: I got my old G3 900mHz iBook up and running with Panther 10.3.9 and wish to install a program that converts FLV and MP4 files into a format my iBook can use. I tried FLV Crunch and VideoMonkey which were losers. Much appreciate any recomme