Upon pushing power button my mac pro sits in a holding status with the power light blinking continuously. Fans kick on and it never goes to startup. Trickle LED shows good as does the Power LED. No RAM DIMMS are lit either.
Upon powering on my Mac, the power light begins to flash, the fans kick on and the it seems to lock up. Screen does not come on. I have confirmed it has Trickle and Power by checking the diagnostic LED's on the mother board. No other LED's are lit. None of the RAM LED's are lit either. I removed the battery from the motherboard and waited ten minutes, then reinstalled it. What could the issue be?
Mac Pro specs are:
OS X, Duel Processor, 2.6 GHz, Duel Core, Intel Xeon, 12GB DDR2 RAM
As a general rule, pairs in adjacent slots. Largest sizes on lowest-numbered slots on each riser in turn. It will in work most any order, then when you get close to a final arrangement there is a small .pdf manual available that shows "optimum" arrangement.
Mac Pro (original and 8-core) Memory Replacement Instructions
Similar Messages
-
Power button issue Mac Pro 2.66
Mac Pro 2.66 is connected to a power strip I now notice that I do not have to press the power button to boot this Mac up. To boot it I need to just turn the power strip on WITHOUT pressing the power button and it boots right up. Only occasionally when I turn on the power strip its connected to I have to boot using the power button.
My question is what should I do here?
Isn't the power button part of the power supply?
If so can I repair the button or do I need a new power supply?
Anyone?
rdYour Mac may "restart automatically after power fail" if that parameter is set in:
System preferences > Energy saver -
Hy ,
My mac pro (SL 10.6.8) wakes up every minutes when I use wake on lan and I share one of my Hard Drive.
When I unplug the ethernet cable it doesn't wake any more so I suppose that some thing wakes it up on my network ( 1 printer canon MP620, 2 mac books, 2 iPads, 2 IPhones and 2 time capsules !) ...even when all these devices are "sleeping"
Any idea?
THKS
Phil
PS .: I'm french so my english is probably quite strange ! ... Sorry for thatSorry - posted this in the wrong forum. Reposted in Mac Pro.
-
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I cannot get my Mac Pro (Original) MacPro1,1 to boot with the 64 Bit kernel in 10.6.8
I cannot get my Mac Pro (Original) MacPro1,1 to boot with the 64 Bit kernel in 10.6.8 (this is a 2 x 3Dual-Core Intel Xeon machine).
Firmware = MP11.005C.B08 (EFI 1.2) 1.7f10 (SMC 1.1)
Will it not run the 64 bit kernel?
Is there a firmware upgrade to allow this?
Should I bother?
It won't boot with the Key 6 & 4 method.
or using Terminal command;
sudo systemsetup -setkernelbootarchitecture x86_64
Any suggestions?
Thanks in advance...
EricBecause it can't and doesn't have a 64-bit supported firmware.
UEFI (EFI64) was not finalized and adopted until very late 2007 and introduced in 2008, by Apple, Intel, other members of EFI Group and Unified EFI. The Mac Pro Mid-2010 was the first time though that 64-bit mode was the default.
Does it matter? not really. you can't install 48GB RAM anyway, while there are some improvements from 64-bit kernal.
Also can't boot Windows 7 64-bit DVD to install properly. But you can run Windows 64-bit kernel because you have a 64-bit Xeon.
Macs that use 64-bit kernel
64-bit kernel mode Snow Leopard
Booting with 32-bit or 64-bit kernel
Mac OS X- 64-bit kernel questions
http://macperformanceguide.com/SnowLeopard-64bit.html -
I have a mac pro i bought in 2008. I keep getting prompted my start up disk is full. I have delted many files, however I'm still getting the prompt
Then your hard drive is full. You need to move large libraries to another location (like an external drive). Libraries like iPhoto, iTunes, and even iMovie Events, are very big space hogs.
iPhoto
Moving iPhoto Library - http://support.apple.com/kb/HT1229. and http://support.apple.com/kb/PH2506.
iTunes
Moving iTunes Music from one computer to another or an external drive - http://docs.info.apple.com/article.html?path=iTunesMac/8.2/en/15475.html and HT1449 - http://support.apple.com/kb/ht1449
iMovie
Moving iMovie Events to an external drive to save space see the following 2 articles:
PH2302 - How to move "Events Only" to an external hard drive - http://support.apple.com/kb/PH2302?viewlocale=en_US.
PH2289 - How to move "Projects" (and their associated events) to an external drive - http://support.apple.com/kb/PH2289?viewlocale=en_US&locale=en_US.
Also note, you can save space on your hard drive by deleting "Excess" unused video in your event folder - see the iMovie 11 help menu, and select the "browse help" tab. Under Manage Events, select "Delete all excess video from an event"
NOTE - ensure you are "Moving" the data, and not just "Copying" the data as per - http://support.apple.com/kb/PH2302?viewlocale=en_US. (hold down COMMAND while dragging to the external drive) for the best results and less chance of loosing data connection with the project -
Aperture ate my picture files and they are not recoverable. The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall. But Purchases says it is "Installed" so it does not let me download it again. HELP!!!!
I typed Aperture into Spotlight and sure enough it did show up.
It looks like it is supposed to be in Apps.
But it is not there.
So I clicked on the spotlight Aperture and it opened up the App!!!!
But I do not know where it is to move it!
How can I find it?
While Aperture is running and you are seeing it in the Dock, ctrl-click (or right click) the Dock icon.
You will see a contextual menu. Click on "Options", then select "Show in Finder".
And check the "keep in Dock" mark, so you will not lose it from the Dock. -
my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in
If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.
-
My Mac Pro all of a sudden would not turn on. It beebs 3 times, pauses, and then does it again. I don't think I have downloaded anything recently and I don't know what to do!
3 beeps usually means a Ram problem, have you added or removed Ram recently?
And I will assume that you do not have a Mac Pro, but that you have a portable, a MacBook Pro. -
Hi,
I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Developer Program(I started that..though not finished yet)My developer will walk me thru submitting it.Please help.
Thanks,
sheapps28You'll need a Mac with a support OS X and tools to complete the process.
-
My Mac pro is in off mode permanently: black screen, no light (not even the cable), not sound...just dead! I bought it 3 months ago and this is disappointing. Any advice?
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Otherwise as the other folks indicated, its time for diagnostics / service. Make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance. -
I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.
iDVD 7 should work fine with 10.7.5. Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT -
Will my Mac Pro 3.1 early 2008 work with Nvidia Geforce GTX460 768 graphix card?
will my Mac Pro 3.1 early 2008 work with Nvidia Geforce GTX460 768 graphix card?
Depends upon the OSX version you have.. You need 10.8.3 or later for a non- Mac flashed card. For more detail:
User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards -
I bought a Mac PowerBook in 2008. It came with InDesign CS3. I did not use it. My computer was stolen in 2014. I had backed up the hard drive. I reinstalled on my new Mac laptop. I want to use the CS3 now. It will not download or install. What do I do?
From where are you trying to download it?
-
The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
NinaMany InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.
Maybe you are looking for
-
No drives shown in printer setup utility
Accidently erased printer drive for Hp deskjet 935c, when I went into printer setup utility app there was no drivers displayed even when I hit "more printers" still no divers were shown. I thought somthing wrong with printer setup utility app so I re
-
Clamshell mode and mouse not working on external monitor
Suddenly I notice that when I put my MBP (late model 2008, Lion) in clamshell mode, my blue tooth mouse and wireless keyboard become unresponsive I think the MBP has frozen but its only that the mouse and keyboard do not respond. I have to open the M
-
Hello Guys I'm not very experienced with home plugs and have a pair set up and running that came with my vision box. My question is if i want to connect my PS3 via home plug/s do i need another pair or just the 1 plug? Best BT india advice i have see
-
Not able deploy from Jdeveloper
Dear All, While trying to deploy from Jdevloper i am getting below error Authorisation Request Enter user name and password for proxy Realm Authetication scheme NTLM [12:08:20 PM] Received HTTP response from the server, response code=407 [12:08:20 PM
-
Hi, I have a ipod touch 4G 32GB. after my itunes v10 updated the ipod touch to software 5, it just doesnt seem to sync my movies into my ipod. ive checked everything, i even restored the ipod and restarted it. any help?!