URENT

HI GUYS PLZ SEND ME CLEAR INFORMATION
1.what is the use of a valuation class?
2. what are the goods receipt movement type?
3. what is the financial statement versions path?
4. what factors differentiates from one dunning level and other dunning level?
5. whether any FI document will be created during PO ( purchase order) ? if PL mention the entry also?
6. APP there will be many banks in a house bank.? If the payment should be maid from particular bank GL account . where it is need to configure?
7.what are adjustment postings and its use? Give t.codes and paths if possible?
8.is it possible to have depreciation calculated to the day?
9. what is sap landscape?
10. what is a year dependent fiscal year variant?
THANKS N REGARDS
NAGESH

Well, whenever I add songs that are already in iTunes, I get duplicates, too.
Just add the new songs, not the whole folder.

Similar Messages

Report (T.CODE) for pending PO for release..VERY URENT

Hi guru's
First i wiil tell clearly abt my requirement, i wnt to get a report(list) of pending PO for release (i want to view the PO, but i dont want the option to release PO).In ME28 there is option to view pending PO for release and also for option to release.
So i went to T.code ME2N, and i create a new scope of list in SPRO.
For reporting , in SPRO i have made (pending for PO release(PPFR) in Scope of list).
To get the exact report in Front end , any further SPRO activites is there to get a report.
Goods solution will be highly rewardable..
Please send me immediately.. urgent..
Thanks
sap-mm

Hi
Simple method for resolving your issue is,
1.Goto Release PO Tcode:me29n
2.Click Selection Variant under document overview on
3.Click Purchase orders option
4.Click Dynamic selection
5.Click purchasing document header
6.Select Subject to release option
7.Choose yes "X" and press enter
8.Enter company code under relevant field
8.Create variant and save variant
9.Execute the screen
It will list all the pending PO's for approval.
Reward point if it is useful.
regards
DVP

URENT ITUNES QUESTION

hi, i have itunes latest version for pc.. whenever i "add folder to libary" the music duplicates i have over 500 songs so its a pain to remove the duplicate songs. but how can i change it so that when i "add file to folder" all the new songs in that folder will appear in i tunes... It used to do this ....... hurry

Well, whenever I add songs that are already in iTunes, I get duplicates, too.
Just add the new songs, not the whole folder.

Cannot save presentation urent help needed please

Hello everyone, I hope that someone will come to my rescue tonight.
I opened a ppt in keynote made some changes of background texte formating when I tried to save I got a little sound that said not now.
I noticed that in the left area of the navigator 3 or 4 slides have a little blue triangle in the lower right corner of the slide. I did not put that there and it does not show on the slide itself. Is that the culprit and what is causing it.
I need this presentation tomorrow morning for my class.
Thank you in advance
Cheers (that's what I need I think)
Mireille

I am using a paid version. I rebuilt the whole thing from scratch and I was able to save it but I still don't know what I did to create the problem, which means it could recur and I could not solve it.
I guess it must have been one of these bugs in the program.
Thanks for the reply
Mireille

Time sheet uploading from Non SAp to SAP R/3.

Hi,
          I am trying to upload the time sheets from Non SAp to SAP with the datails like the sales oreder for which the employee worked, time spent ect.
          While uploading this from Excel to R/3 using se38, I am gettig an error saying "Enter sender activty also".
          I have checked if the activity type is checked in the CATS data entry profile, it is selected in the defaults.
         I have cheked in KP26, for the year we have given the planned activity also.
         In KSPI, I have run the price alculation for all the cost center with the activity type.
         I have seen the validity periods of the cost centers, activity typs are in line with 2010.
          I am able to upload the time sheets for a few employees and for a few it asks for the "Sender activity type".
          Please assist me, its very urent.
Regards,
Shilpa.

For employees where you are facing this error, please check if Time Sheet defaults - IT0315 is maintained, and if not maintain it.
Hope this helps.

Ok, so one day i restored my phone and it did not sync to the backup. So now i have found a backup i would like to use, and i put it on my desktop. how do i get it to itunes so that when i click "sync to backup" the backup will be there.

PLEASE HELP ITS URENT!!!!

What model iMac? What Mac OS version? If you are not sure, please do "About this Mac" from your Apple menu and tell us what the two lines I've emphasized with red arrows in the illustration below say on your computer:

Issue on sync for iPhone4S (iOS6.1) with iTune Version 11.3.1.2 to Win7 and Outlook 2007

Urently>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
After I synchronized my iPhone4S (iOS6.1) with iTune
Version 11.3.1.2 to my PC (Chinese Win 7 and Outlook 2007), then most
95% of Contact's phone number be also disappeared in my iPhone & Outlook.
It is only showed the each Profile's Contact's name without the phone number in
iPhone4S and Outlook2007, affected over 95% contact profiles' in my iPhone and
Outlook. It affected as I lost most of all contact persons' phone
number. Please help to fix and advise urgently.

Hello kylhk,
I would start with looking to when you had a back up before the issue with your contacts. If you do, then I would recommend to restore your iPhone and put that back up back on to get your contacts back. Check out the article below for the steps on how to do that.
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Regards,
-Norm G.

Doubt about How to test the BAPI

Hi Experts,
I have one doubt. How to test one BAPI. I have BAPI_DOCUMENT_SAVEOBJECTLINKS
I am using this BAPI to attach the document to the material. I opened se37 .Here how to test the BAPI wether the BAPI is Suitable to attach the document or not. Please let me know . Its very urent.
Helpful answers may be reward points
Regards
Khanna

Hi,
First you have to create a new document using CV01N tcode. Here leave the document field as blank, document type value can be choosen from F4 help and document part and document version can be given as 0. Press enter and add the necessary values and save. It will then create a new document. Using that document go to SE37 and execute the BAPI. In the BAPI also you need to give the document no that is generated, and document type, document part and document version of the newly generated document. In the OBJECTLINKS table of the BAPI give the material number and other details. Please see the function module documentation of this BAPI also.
Please reward points if it helps.
Regards
Vimal

Cisco 880G+7 3G connection issue

Hi all ,
There is a problem with 3G all time on 880G router . It seem that i doing someting wrong or cisco modem is not working well
On few modems i cant get 3g data connection , and when that same SIM card i put in phone internet works , but on 880G router dont want.
How to get this to work stable ?
boot system flash flash:c880data-universalk9-mz.154-2.T1.bin
chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
interface Cellular0
description WAN towards MTS
ip address negotiated
ip mtu 1452
ip virtual-reassembly in
encapsulation slip
load-interval 60
dialer in-band
dialer idle-timeout 2147483
dialer string hspa-R7
dialer-group 1
async mode interactive
dialer-list 1 protocol ip permit
line 3
exec-timeout 0 0
script dialer hspa-R7
login
modem InOut
no exec
transport input all
transport output all
cellular 0 gsm band wcdma-all-bands
cellular 0 gsm profile create 1 gprswap chap mts 064
cellular 0 gsm plmn select auto
#sh cellular 0 network
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = UMTS/WCDMA (Attached)
Packet Session Status = Inactive <-----
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = SRB, Network = MTS
Mobile Country Code (MCC) = 220
Mobile Network Code (MNC) = 3
Location Area Code (LAC) = 40203
Routing Area Code (RAC) = 1
Cell ID = 35420
Primary Scrambling Code = 236
PLMN Selection = Automatic
Registered PLMN = , Abbreviated =
Service Provider = mt:s
#sh cellular 0 connection
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
Inactivity Reason = Service option not subscribed
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
#sh cellular 0 profile
Profile 1 = INACTIVE* **
PDP Type = IPv4
Access Point Name (APN) = gprswap
Authentication = CHAP
Username: mts
Password: 064
#sh cellular 0 hardware
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) =
International Mobile Equipment Identity (IMEI) = 357115041460655
Integrated Circuit Card ID (ICCID) = 89381030000075802506
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3022411121011
Modem Status = Online
Current Modem Temperature = 28 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2
#sh cellular 0 radio
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10663
Current RSSI(RSCP) = -91 dBm
Band Selected = WCDMA All(800/850/900/1900/IMT 2000)
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0xEC
RSCP = -90 dBm, ECIO = -11 dBm
Other issue that i want ot check , after reload of router it seems like ip sla dont want to start
config is :
ip sla 1
icmp-echo 8.8.8.8
frequency 20
ip sla schedule 1 life forever start-time now
track 1 ip route 8.8.8.8 255.255.255.255 reachability
ip route 8.8.8.8 255.255.255.255 Cellular0
I need this because after router reload , i need some packets to get cellular int up and so on ...
Any idea?
Please i need urent help
KR
VZ

Thx for document , i solved this .
Still i have another issue with dmvpm because nat over 3g .
9 212.200.65.244 172.29.3.1 UP 00:20:37 DN
0 UNKNOWN 172.29.3.5 NHRP never IX
0 UNKNOWN 172.29.3.8 NHRP never IX
0 UNKNOWN 172.29.3.9 NHRP never IX
0 212.200.65.244 172.29.3.13 UP 00:01:10 DN
172.29.3.21 UP 00:27:48 DN
0 UNKNOWN 172.29.3.25 NHRP never IX
0 UNKNOWN 172.29.3.30 NHRP never IX
0 212.200.65.244 172.29.3.34 UP 00:15:10 DN
1 212.200.65.243 172.29.3.26 UP 00:07:28 DN
As you can see few sites use same (nated ) public ip , so some dmvpn tunnels dont works.
Any solution for this ?

URENT

Similar Messages

Maybe you are looking for