Time sheet uploading from Non SAp to SAP R/3.

Hi,
          I am trying to upload the time sheets from Non SAp to SAP with the datails like the sales oreder for which the employee worked, time spent ect.
          While uploading this from Excel to R/3 using se38, I am gettig an error saying "Enter sender activty also".
          I have checked if the activity type is checked in the CATS data entry profile, it is selected in the defaults.
         I have cheked in KP26, for the year we have given the planned activity also.
         In KSPI, I have run the price alculation for all the cost center with the activity type.
         I have seen the validity periods of the cost centers, activity typs are in line with 2010.
          I am able to upload the time sheets for a few employees and for a few it asks for the "Sender activity type".
          Please assist me, its very urent.
Regards,
Shilpa.

For employees where you are facing this error, please check if Time Sheet defaults - IT0315 is maintained, and if not maintain it.
Hope this helps.

Similar Messages

Loan upload from legacy system to SAP

Hi Experts,
I have a query regarding uploading Loan from legacy system to SAP.
We are implementing SAP HR for a client going live by 1st jun 2011. The scenario is the client has few employees who have taken loan for various reason, i have configured the same through SPRO....now my query is when i ask the client to provide me with loan data:
1. We are running payroll from 1st April 11, should i ask the client to give me the loan amount as the current standing loan amount
2. when i am uploading loan in 0045, should i put something in third tab payment
Thanks for your support.
Regards,
Jyoti

Hi,
This third tab basically create a record for info type 0078(Loan Payments). If you don't have any records in 3rd tab/0078, system will not start loan recovery in payroll.
Find the response for 2 scenarios-
Scenario 1 & Scenario 2:
maintain these fields in the table control of 3rd tab-
Date(GT_PAYM-ZAHLD) - 01.04.2011....Basically payments and repayments starts date also used for interest calculation
PmntTyp(GT_PAYM-ZAHLA) - 100(Loan payment (external)) ....Contains information on the direction and method of payment. Also control wage type generation in loan PCR and Functions
Amount(GT_PAYM-BETRG) - Balance Amount ....The total of payment or repayment amounts which you enter here, may not exceed the amount that you have entered in the Approved loan amount field on the Basic data tab page ....For your both of the scenariof, this amount will be same.
Regards.
Suman
Edited by: suman poddar on May 22, 2011 10:28 AM

Time sheet upload to Service entry sheet

We have contractors, who works in our project. They are not on payroll. We have service PO for them. They are thru some third party vendor. Vendor gives the Time sheet, and we enter the service entry sheet, make the invoice & do the payment.
Now the requirement is, that the service entry sheet should be created from Time sheet (third part xls file). Can this be uplaoded to create service entry sheet ??
Thanks
amit

Dear Amit,
You can use the transaction CAT2, but as far as I know you need to copy / paste teh content from your excel file.
You may consider using one of the following BAPIs to insert, change or
delete CATS data via collective time recording:
BAPI_CATIMESHEETMGR_CHANGE
BAPI_CATIMESHEETMGR_DELETE
BAPI_CATIMESHEETMGR_INSERT
Regards,
Edit

Cats Configuration for time sheet upload

Dear All,
I have time sheet file now i have to upload .Kindly guide me how i can do this thing with help of CATS.I am not aware of the cats how i have to maintain the profile and field selection CAC1,CAC2.
I want to know the steps for doing the same kindly tell me it's urg.
thanks
sandeep

Hi
Create a profile in CAC1 and setup the profile settings in CAC2.
What you select in CAC2 appears in CAT2 sheet.
The CATS config is self explanatory.
R K

Weather Career Change is advisable from Non IT to SAP after 10 years of experience in Construction Industry

Hi,
I have 10 years of experience in construction industry.My area of expertise is in project management.I before 5 years I have a strong desire to work in IT industry. But not able to get a chance.But I need a career profile change to IT industry. So I choose to do SAp ps leaning *** certification from authorised training partner. module.please suggest
1. whether this is advisable.
2. Whether I need to resign from my current job.
3. What salary I can expect from SAP job profile, as my current salary is 7 to 8 lacs.
4. Whether I will get a job immediately after certification.
5. Howmuch SAP PS certification Job requirement in market.
Please advise.
Thanks,
Priyadarshan

Hi Sama,
Kindly go through below link and all you questions will be answered.
Career Center
Regards
D.Singh

Excel sheet upload from alv report.

hi friends,
        we created one report which will display about sales from vender,. we created it as hirarical alv report.
we all know when we downloaded the data which is shown on report to excel sheet standard report will run. but when i saw my excel file most of rows are exported finly but some of rows are clubed into another row colum. how it is happening. the data is passed to excel sheet by standard report how this prablem is happening.
plz guide me
thanq,
rajesh.k

hi
use code below to upload excel.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
   FILENAME                = 'exccel Worksheet.txt'
   FILETYPE                = '.XLS'
   HAS_FIELD_SEPARATOR     = '#'
   HEADER_LENGTH           = 0
   READ_BY_LINE            = 'X'
   DAT_MODE                = SPACE
   CODEPAGE                = SPACE
   IGNORE_CERR             = ABAP_TRUE
    REPLACEMENT             = '#'
   VIRUS_SCAN_PROFILE      =
IMPORTING
   FILELENGTH              =
   HEADER                  =
CHANGING
   DATA_TAB                = <fs_dict>
EXCEPTIONS
   FILE_OPEN_ERROR         = 1
   FILE_READ_ERROR         = 2
   NO_BATCH                = 3
   GUI_REFUSE_FILETRANSFER = 4
   INVALID_TYPE            = 5
   NO_AUTHORITY            = 6
   UNKNOWN_ERROR           = 7
   BAD_DATA_FORMAT         = 8
   HEADER_NOT_ALLOWED      = 9
   SEPARATOR_NOT_ALLOWED   = 10
   HEADER_TOO_LONG         = 11
   UNKNOWN_DP_ERROR        = 12
   ACCESS_DENIED           = 13
   DP_OUT_OF_MEMORY        = 14
   DISK_FULL               = 15
   DP_TIMEOUT              = 16
   NOT_SUPPORTED_BY_GUI    = 17
   ERROR_NO_GUI            = 18
   others                  = 19
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.

SRM SUS-Time sheet Approval

Hi All,
My client requirement is Payment of IT service charges to IT Vendor.Right Now it is Manual (Posting directly to GL account).
We want to integrate this process i SAP-MM and SRM-SUS. I heared about Time sheet process from SRM.
can anybody give the process flow for Time sheet application process through SRM-SUS.
regds
Ramireddy

post this query to SRM forum
yogesh

Cross Application Time Sheet (CATS) - Documentation for ECC 6.0

Hello everybody,
i'm searching for new documentation for customizing of Cross Application Time Sheet (CATS) for
SAP ECC 6.0.
I found on
http://help.sap.com/saphelp_nw04/helpdata/en/64/3fff9a470211d189720000e8322d00/frameset.htm
support SAP link.
I have also Cross Application Time Sheet (CATS) pdf documentation but for SAP R/3 4.6c release.
Can somebody suggest me where to find "how to" pdf documentation for ECC 6.0 release?
Thanks
Jerry

Hi,
you can refer to books by SAP press... Configuration CATS
and can log on to Service.sap.com
Regards,
Kapil Kaushal

Approve Time Sheet data

Hi friends,
I am getting problem when trying to "Approve Time Sheet data " from MSS. I am not using Work flow but the link given in MSS Team. When i am clicking on the link the first page is comming and i can see the requested working time for approval. But when i click on the review an error occured. the details is:
Exception condition "NOT_FOUND" raised., error key: RFC_ERROR_SYSTEM_FAILURE
From R3 by ST22 i checked the error. Its like...
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_MSS_CAT_APPR_APPLICATION===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
I can approve the working time from R3 by cats_appr_lite transaction.
Please help.
Thanks,
Sekhar

Hi Mani,
It is a good thing you have found this post, as it demonstrates that you put in some effort to search for similar posts to your problem.
However, if the post you found is like 3 years old and there are no replies, chances are the guy did not find a solution or isn't visiting here anymore. So it might be a good idea to raise a new post, to increase you chances of getting some answers.

The time sheet record collides with an attendance.

Dear Expert,
I got the following error message when I try to apply OT through CAT2.
Message no. HRTIM00CATS208
Diagnosis
The time sheet record from 18:00 - 19:00 o'clock collides with an attendance or absence of less than one day recorded in HR Time Management. The record entered in HR Time Management is entered in the next line.
My overtime is record in infotype 2002 and subtypes 1010 while the attendance is in infotype 2002 and subtype 1000. I just want the overtime to check against the absences (e.g. leave) but not the attendance. This attendance is just for display only.
Any idea how to configure?
Thanks
Regards,
Bryan

Hi Aditya,
My constraint class for infotype 2002 subtype 1000 (attandance) is 1 and infotype 2002 subtype 1010 (overtime) is 2.
I already specify any class of infotype 2002 that crash with 2002 (any class) to N at V_554Y_B. But it is still giving me the same error message.
Any idea?
Thanks
Regards,
Bryan
My constraint class for infotype 2002 subtype 1000 (attandance) is 1 and infotype 2002 subtype 1010 (overtime) is 2.
I already specify infotype 2002 crash with 2002 (any class) to N at V_554Y_B. But it is still giving me the same error message.
Any idea?
Thanks
Regards,
Bryan

Uploading data from non sap system to sap system

hi to all experts,
my requirement is to upload data into the sap system from non sap system . the data is in a flat file ,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system. How to upload the data into sap system ....

hi,
the data is in a flat file,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system.
If the data is in excel sheet use this FM.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME                      = P_FILE
      I_BEGIN_COL                   = 1
      I_BEGIN_ROW                   = 1
      I_END_COL                     = 17
      I_END_ROW                     = 3000
    TABLES
      INTERN                        = itab
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
It will read the data from excel sheet column wise and then store it in ITAB. you can change the order after reading the file.
In case of Text file use FM GUI_UPLOAD.
You can change the order of the fileds after reading it from file, but the length and all you have to make compatible to SAP standard fields.
Regards,
Sachin

Shift of Customer service department from Non SAP system

Hi All
I have two companies one in SAP and other Non SAP .Now the Client has planned to move/MERGE the Customer service department (ONLY ) of the non SAP legacy to the existing SAP company code ,though there is no physical movement of Goods from the new merged SAP plant since all sales process involve 100% drop shipment.So for this what should be the ideal approach ?
My gues would be to create New Sales area/Sales office/ sales group assigned to the SAP company code,data upload of material master/customer master/vendor/open order/open billing etc..
Pls advise if this the apt one ?
thanks
Viswa

Hi Will,
Please check configuration "Reset Time Series for Incoming ProductActivityNotifications". This should help you reset old values with new values.
IMG - Supply Network Collaboration -> Basic Settings -> Processing Inbound and Outbound Messages -> Display of External Exceptions and Logs -> Reset Time Series for Incoming ProductActivityNotifications
Hope this helps you.
Thanks,
Sunil

Upload Opening balance of G/L accounts from legacy system to SAP, and also

Hi Gurus,
How to upload Opening balance of G/L accounts from legacy system to SAP, and also Vendor and Customer balance.
My Doubt is when you upload the customer balance and vendor balance will it effect the sundry debtor account and sundry creditor account if not the how will the sundry debtor account and sundry creditor account will be posted with the balance. Please send me the general entry passed for posting the same.
What I understood is that when we are uploading the customer and vendor balances through LSMW, no entry will be passed and it will update the customer and vendor sub ledger in FBL1N and FBL5N but it will not affect the sundry debtor account and sundry creditor account.
To give effect to sundry debtor account and sundry creditor account we need to manually pass a journal entry as follows.
1) Sundry debtors account A/c -
DR
      TO clearing account A/c
2)     clearing account A/c -
dr
     Sundry creditor account A/c
Please let me know whether iam correct
Also please tell me what will be the scenario for uploading of the assets balances through LSMW.
THANKS AND REGARDS
MV

Hi,
     When you uploading any data from legacy system to sap normally we will be using LSMW or BDC,thru this we will be uploading master data like G/L,vendor,Customer and asset master these are the some examples and we will upload transaction data also that is P&L Account and Balance sheet.When we do uploading data thru LSMW system will update all the values of vendor,customer and asset values as well as subsidary ledger also.No need to do manully.
Regards,
satya,
FICO

Master Data cleansing and transformation from non-SAP source systems

Hi all,
Our client (Media)wants to cleanse and transform his master data from non-SAP source system to be uploaded into BW (no R/3 yet). If anybody has a document regarding this topic that i could use, i will appreciate if u sent it to me.
thanks.

Hi,
https://websmp203.sap-ag.de/~sapidb/011000358700001965262003
https://websmp203.sap-ag.de/~sapidb/011000358700006591612001
https://websmp203.sap-ag.de/~sapidb/011000358700001971392004
https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000471477&_OBJECT=011000358700008927932002E
/manfred

What ATP category to use when loading from non SAP system

Hi Experts,
We are sourcing transactional data from SAP R/3 and using CIF to transfer these data to APO.
Now we have new sets of material locations where we are going to source transcational data from non-SAP system. We are going to extract file from non-SAP system and load it to APO. My question is, do I need to create new categories (non SAP categories) for all these transactional data (sales order, production order, purchase order, etc...) Or can I just use existing SAP categories that are getting populated when data are coming from R/3 through CIF.
If its possible, can I use RLCDELETE to delete previously posted transactional data? because we are planning to do full refresh and reload everyday.
Appreciate your help. Thanks
Regards,
Mylene

Hi My lene,
If i undersood your question correctly, you are trying to upload transaction data into APO system using file interface.
You can use custom or standard ATP categories to upload any type of transaction data and deletion of those orders also possible for both the ATP categories using RLCDLETE report (except salesorder and fixed planned orders, they can be deleted by SDORDER_DEL & DELETE_PP_OREDER reports respectively).
Custome categoires will be used in case additional data needs to get stored in APO system along with the standard transaction data coming from ECC system . For example, salesorders coming from ECC and uploaded from file.
If the transaction data coming from only one source system then it is better to use standard categories.
Hope this answers your question.
Thanks & Regards,
Jagadeesh

Time sheet uploading from Non SAp to SAP R/3.

Similar Messages

Maybe you are looking for